camel_to_upper() converts its argument from camel case to upper case
with '_' between words. Used for generated enumeration constant
prefixes.
When some of the words are spelled all caps, where exactly to insert
'_' is guesswork. camel_to_upper()'s guesses are bad enough in places
to make people override them with a 'prefix' in the schema.
Rewrite it to guess better:
1. Insert '_' after a non-upper case character followed by an upper
case character:
OneTwo -> ONE_TWO
One2Three -> ONE2_THREE
2. Insert '_' before the last upper case character followed by a
non-upper case character:
ACRONYMWord -> ACRONYM_Word
Except at the beginning (as in OneTwo above), or when there is
already one:
AbCd -> AB_CD
This changes the default enumeration constant prefix for a number of
enums. Generated enumeration constants change only where the default
is not overridden with 'prefix'.
The following enumerations without a 'prefix' change:
enum old camel_to_upper()
new camel_to_upper()
------------------------------------------------------------------
DisplayGLMode DISPLAYGL_MODE
DISPLAY_GL_MODE
EbpfProgramID EBPF_PROGRAMID
EBPF_PROGRAM_ID
HmatLBDataType HMATLB_DATA_TYPE
HMAT_LB_DATA_TYPE
HmatLBMemoryHierarchy HMATLB_MEMORY_HIERARCHY
HMAT_LB_MEMORY_HIERARCHY
MultiFDCompression MULTIFD_COMPRESSION
MULTI_FD_COMPRESSION
OffAutoPCIBAR OFF_AUTOPCIBAR
OFF_AUTO_PCIBAR
QCryptoBlockFormat Q_CRYPTO_BLOCK_FORMAT
QCRYPTO_BLOCK_FORMAT
QCryptoBlockLUKSKeyslotState Q_CRYPTO_BLOCKLUKS_KEYSLOT_STATE
QCRYPTO_BLOCK_LUKS_KEYSLOT_STATE
QKeyCode Q_KEY_CODE
QKEY_CODE
XDbgBlockGraphNodeType X_DBG_BLOCK_GRAPH_NODE_TYPE
XDBG_BLOCK_GRAPH_NODE_TYPE
TestUnionEnumA TEST_UNION_ENUMA
TEST_UNION_ENUM_A
Add a 'prefix' so generated code doesn't change now. Subsequent
commits will remove most of them again. Two will remain:
MULTIFD_COMPRESSION, because migration code generally spells "multifd"
that way, and Q_KEY_CODE, because that one is baked into
subprojects/keycodemapdb/tools/keymap-gen.
The following enumerations with a 'prefix' change so that the prefix
is now superfluous:
enum old camel_to_upper()
new camel_to_upper() [equal to prefix]
------------------------------------------------------------------
BlkdebugIOType BLKDEBUGIO_TYPE
BLKDEBUG_IO_TYPE
QCryptoTLSCredsEndpoint Q_CRYPTOTLS_CREDS_ENDPOINT
QCRYPTO_TLS_CREDS_ENDPOINT
QCryptoSecretFormat Q_CRYPTO_SECRET_FORMAT
QCRYPTO_SECRET_FORMAT
QCryptoCipherMode Q_CRYPTO_CIPHER_MODE
QCRYPTO_CIPHER_MODE
QCryptodevBackendType Q_CRYPTODEV_BACKEND_TYPE
QCRYPTODEV_BACKEND_TYPE
QType [builtin] Q_TYPE
QTYPE
Drop these prefixes.
The following enumerations with a 'prefix' change without making the
'prefix' superfluous:
enum old camel_to_upper()
new camel_to_upper() [equal to prefix]
prefix
------------------------------------------------------------------
CpuS390Entitlement CPUS390_ENTITLEMENT
CPU_S390_ENTITLEMENT
S390_CPU_ENTITLEMENT
CpuS390Polarization CPUS390_POLARIZATION
CPU_S390_POLARIZATION
S390_CPU_POLARIZATION
CpuS390State CPUS390_STATE
CPU_S390_STATE
S390_CPU_STATE
QAuthZListFormat Q_AUTHZ_LIST_FORMAT
QAUTH_Z_LIST_FORMAT
QAUTHZ_LIST_FORMAT
QAuthZListPolicy Q_AUTHZ_LIST_POLICY
QAUTH_Z_LIST_POLICY
QAUTHZ_LIST_POLICY
QCryptoAkCipherAlgorithm Q_CRYPTO_AK_CIPHER_ALGORITHM
QCRYPTO_AK_CIPHER_ALGORITHM
QCRYPTO_AKCIPHER_ALG
QCryptoAkCipherKeyType Q_CRYPTO_AK_CIPHER_KEY_TYPE
QCRYPTO_AK_CIPHER_KEY_TYPE
QCRYPTO_AKCIPHER_KEY_TYPE
QCryptoCipherAlgorithm Q_CRYPTO_CIPHER_ALGORITHM
QCRYPTO_CIPHER_ALGORITHM
QCRYPTO_CIPHER_ALG
QCryptoHashAlgorithm Q_CRYPTO_HASH_ALGORITHM
QCRYPTO_HASH_ALGORITHM
QCRYPTO_HASH_ALG
QCryptoIVGenAlgorithm Q_CRYPTOIV_GEN_ALGORITHM
QCRYPTO_IV_GEN_ALGORITHM
QCRYPTO_IVGEN_ALG
QCryptoRSAPaddingAlgorithm Q_CRYPTORSA_PADDING_ALGORITHM
QCRYPTO_RSA_PADDING_ALGORITHM
QCRYPTO_RSA_PADDING_ALG
QCryptodevBackendAlgType Q_CRYPTODEV_BACKEND_ALG_TYPE
QCRYPTODEV_BACKEND_ALG_TYPE
QCRYPTODEV_BACKEND_ALG
QCryptodevBackendServiceType Q_CRYPTODEV_BACKEND_SERVICE_TYPE
QCRYPTODEV_BACKEND_SERVICE_TYPE
QCRYPTODEV_BACKEND_SERVICE
Subsequent commits will tweak things to remove most of these prefixes.
Only QAUTHZ_LIST_FORMAT and QAUTHZ_LIST_POLICY will remain.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-2-armbru@redhat.com>
This runs replay-dump.py after recording a trace, and fails the test if
the script fails.
replay-dump.py is modified to exit with non-zero if an error is
encountered while parsing, to support this.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
gitlab with this change
v5: Update timeout to 180s because x86 was just exceeding 120s in
Message-Id: <20240813050638.446172-4-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-12-alex.bennee@linaro.org>
Sort decoder functions to be ascending in order of event number,
same as the decoder tables.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-3-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-11-alex.bennee@linaro.org>
The v12 format support for replay-dump has a few issues still. This
fixes async decoding; adds event, shutdown, and end decoding; fixes
audio in / out events, fixes checkpoint checking of following async
events.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-2-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-10-alex.bennee@linaro.org>
If a file imported from Linux is touched, emit a warning and suggest
using scripts/update-linux-headers.sh.
Also check that updating imported files from Linux are not mixed with
other changes, in which case emit an error.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240718072050.9503-1-sgarzare@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-7-alex.bennee@linaro.org>
Refresh with the newly added gtk-vnc package
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240718094159.902024-3-berrange@redhat.com>
[thuth: fixed conflicts in .gitlab-ci.d/cirrus/*.vars]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Update meson-buildoptions.sh to stay in sync with meson_options.txt.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fully eliminate the "Example" sections in QAPI doc blocks now that they
have all been converted to arbitrary rST syntax using the
".. qmp-example::" directive. Update tests to match.
Migrating to the new syntax
---------------------------
The old "Example:" or "Examples:" section syntax is now caught as an
error, but "Example::" is stil permitted as explicit rST syntax for an
un-lexed, generic preformatted text block.
('Example' is not special in this case, any sentence that ends with "::"
will start an indented code block in rST.)
Arbitrary rST for Examples is now possible, but it's strongly
recommended that documentation authors use the ".. qmp-example::"
directive for consistent visual formatting in rendered HTML docs. The
":title:" directive option may be used to add extra information into the
title bar for the example. The ":annotated:" option can be used to write
arbitrary rST instead, with nested "::" blocks applying QMP formatting
where desired.
Other choices available are ".. code-block:: QMP" which will not create
an "Example:" box, or the short-form "::" code-block syntax which will
not apply QMP highlighting when used outside of the qmp-example
directive.
Why?
----
This patch has several benefits:
1. Example sections can now be written more arbitrarily, mixing
explanatory paragraphs and code blocks however desired.
2. Example sections can now use fully arbitrary rST.
3. All code blocks are now lexed and validated as QMP; increasing
usability of the docs and ensuring validity of example snippets.
(To some extent - This patch only gaurantees it lexes correctly, not
that it's valid under the JSON or QMP grammars. It will catch most
small mistakes, however.)
4. Each qmp-example can be titled or annotated independently without
bypassing the QMP lexer/validator.
(i.e. code blocks are now for *code* only, so we don't have to
sacrifice exposition for having lexically valid examples.)
NOTE: As with the "Notes" conversion (d461c27973), this patch (and the
three preceding) may change the rendering order for Examples in
the current generator. The forthcoming qapidoc rewrite will fix
this by always generating documentation in source order.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240717021312.606116-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The double-colon synax is rST formatting that precedes a literal code
block. We do not want to capture these as QAPI-specific sections.
Coerce blocks that start with e.g. "Example::" to be parsed as untagged
paragraphs instead of special tagged sections.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240626222128.406106-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Indentation tweaked for consistency]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We do not need a dedicated section for notes. By eliminating a specially
parsed section, these notes can be treated as normal rST paragraphs in
the new QMP reference manual, and can be placed and styled much more
flexibly.
Convert all existing "Note" and "Notes" sections to pure rST. As part of
the conversion, capitalize the first letter of each sentence and add
trailing punctuation where appropriate to ensure notes look sensible and
consistent in rendered HTML documentation. Markup is also re-aligned to
the de-facto standard of 3 spaces for directives.
Update docs/devel/qapi-code-gen.rst to reflect the new paradigm, and
update the QAPI parser to prohibit "Note" sections while suggesting a
new syntax. The exact formatting to use is a matter of taste, but a good
candidate is simply:
.. note:: lorem ipsum ...
... dolor sit amet ...
... consectetur adipiscing elit ...
... but there are other choices, too. The Sphinx readthedocs theme
offers theming for the following forms (capitalization unimportant); all
are adorned with a (!) symbol () in the title bar for rendered HTML
docs.
See
https://sphinx-rtd-theme.readthedocs.io/en/stable/demo/demo.html#admonitions
for examples of each directive/admonition in use.
These are rendered in orange:
.. Attention:: ...
.. Caution:: ...
.. WARNING:: ...
These are rendered in red:
.. DANGER:: ...
.. Error:: ...
These are rendered in green:
.. Hint:: ...
.. Important:: ...
.. Tip:: ...
These are rendered in blue:
.. Note:: ...
.. admonition:: custom title
admonition body text
This patch uses ".. note::" almost everywhere, with just two "caution"
directives. Several instances of "Notes:" have been converted to
merely ".. note::", or multiple ".. note::" where appropriate.
".. admonition:: notes" is used in a few places where we had an
ordered list of multiple notes that would not make sense as
standalone/separate admonitions. Two "Note:" following "Example:"
have been turned into ordinary paragraphs within the example.
NOTE: Because qapidoc.py does not attempt to preserve source ordering of
sections, the conversion of Notes from a "tagged section" to an
"untagged section" means that rendering order for some notes *may
change* as a result of this patch. The forthcoming qapidoc.py rewrite
strictly preserves source ordering in the rendered documentation, so
this issue will be rectified in the new generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [for block*.json]
Message-ID: <20240626222128.406106-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message clarified slightly, period added to one more note]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If a comment immediately follows a doc block, the parser doesn't ignore
that token appropriately. Fix that.
e.g.
> ##
> # = Hello World!
> ##
>
> # I'm a comment!
will break the parser, because it does not properly ignore the comment
token if it immediately follows a doc block.
Fixes: 3d035cd2cc (qapi: Rewrite doc comment parser)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-7-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Change get_doc_indented() to preserve indentation on all subsequent text
lines, and create a compatibility dedent() function for qapidoc.py that
removes indentation the same way get_doc_indented() did.
This is being done for the benefit of a new qapidoc generator which
requires that indentation in argument and features sections are
preserved.
Prior to this patch, a section like this:
```
@name: lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
would have its body text be parsed into:
```
lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
We want to preserve the indentation for even the first body line so that
the entire block can be parsed directly as rST. This patch would now
parse that segment into:
```
lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
This is helpful for formatting arguments and features as field lists in
rST, where the new generator will format this information as:
```
:arg type name: lorem ipsum
dolor sit amet
consectetur apidiscing elit
```
...and can be formed by the simple concatenation of the field list
construct and the body text. The indents help preserve the continuation
of a block-level element, and further allow the use of additional rST
block-level constructs such as code blocks, lists, and other such
markup.
This understandably breaks the existing qapidoc.py; so a new function is
added there to dedent the text for compatibility. Once the new generator
is merged, this function will not be needed any longer and can be
dropped.
I verified this patch changes absolutely nothing by comparing the
md5sums of the QMP ref html pages both before and after the change, so
it's certified inert. QAPI test output has been updated to reflect the
new strategy of preserving indents for rST.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-6-jsnow@redhat.com>
[Lost commit message paragraph restored]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix minor irritants to pylint/flake8 et al.
(Yes, these need to be guarded by the Python tests. That's a work in
progress, a series that's quite likely to follow once I finish this
Sphinx project. Please pardon the temporary irritation.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-3-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a Meson option to configure which x86-64 instruction
set to use. QEMU will now default to x86-64-v1 + cmpxchg16b for
64-bit builds (that corresponds to a Pentium 4 for 32-bit builds).
The baseline can be tuned down to Pentium Pro for 32-bit builds (with
-Dx86_version=0), or up as desired.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add libqmp to the testlibs component.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240604145934.1230583-6-peter.maydell@linaro.org
Update the 'monitor' component:
* qapi/ and monitor/ are now subdirectories
* add job-qmp.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240604145934.1230583-5-peter.maydell@linaro.org
host/include/*/host/crypto/ are relatively new headers; add them
to the crypto component.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240604145934.1230583-4-peter.maydell@linaro.org
The 'char' component:
* includes the no-longer-present qemu-char.c, which has been
long since split into the chardev/ backend code
* also includes the hw/char devices
Split it into two components:
* char is the hw/char devices
* chardev is the chardev backends
with regexes matching our current sources.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240604145934.1230583-3-peter.maydell@linaro.org
Since commit 83aa1baa06 we have been running the build for Coverity
Scan as a Gitlab CI job, rather than the old setup where it was run
on a local developer's machine. This is working well, but the
absolute paths of files are different for the Gitlab CI job, which
means that the regexes we use to identify Coverity components no
longer work. With Gitlab CI builds the file paths are of the form
/builds/qemu-project/qemu/accel/kvm/kvm-all.c
rather than the old
/qemu/accel/kvm/kvm-all.c
and our regexes all don't match.
Update all the regexes to start with .*/qemu/ . This will hopefully
avoid the need to change them again in future if the build path
changes again.
This change was made with a search-and-replace of (/qemu)?
to .*/qemu .
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240604145934.1230583-2-peter.maydell@linaro.org
Add --enable-uadk and --disable-uadk options to enable and disable
UADK compression accelerator. This is for using UADK based hardware
accelerators for live migration.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
add --enable-qpl and --disable-qpl options to enable and disable
the QPL compression method for multifd migration.
The Query Processing Library (QPL) is an open-source library
that supports data compression and decompression features. It
is based on the deflate compression algorithm and use Intel
In-Memory Analytics Accelerator(IAA) hardware for compression
and decompression acceleration.
For more live migration with IAA, please refer to the document
docs/devel/migration/qpl-compression.rst
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Remove libibumad dependence from the test environment.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240611105427.61395-3-pizhenwei@bytedance.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Events aren't designed to be multi-lines. Multiple events
can be used instead. Prevent that format using multi-lines
by forbidding the newline character.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mads Ynddal <mads@ynddal.dk>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240606103943.79116-6-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vcpu.py is pointless since commit 89aafcf2a7 ("trace:
remove code that depends on setting vcpu"), remote it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-id: 20240606102631.78152-1-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow VMX nested-exception support to be exposed in KVM guests, thus
nested KVM guests can enumerate it.
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Message-ID: <20231109072012.8078-6-xin3.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Report secondary vm-exit controls and the VMX controls used to
save/load FRED MSRs.
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Message-ID: <20231109072012.8078-5-xin3.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now lcitool can write the package list for us we no longer need to
duplicate the information directly in build-environment.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-13-alex.bennee@linaro.org>
With the new ability to output YAML we can build the package list for
our ansible setup scripts. We will integrate them in the next commit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-12-alex.bennee@linaro.org>
Document we have split up build-environment by distro and update the
references that exist in the code base to be correct.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-7-alex.bennee@linaro.org>
Although I've just removed the CentOS specific build-environment its
probably a bit too confusing to have multiple distros mixed up in one
place. Prior to moving clean-up what will be just for ubuntu.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-6-alex.bennee@linaro.org>
This broke since eef0bae3a7 (migration: Remove block migration) but
even after that was addressed it still fails to complete. As it will
shortly be EOL lets to remove the runner definition and the related
ansible setup bits.
We still have centos9 docker images build and test.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-2-alex.bennee@linaro.org>
Right now QEMU is importing arch/x86/include/uapi/asm/kvm_para.h
because it includes definitions for kvmclock and for KVM CPUID
bits. However, other definitions for KVM hypercall values and return
codes are included in include/uapi/linux/kvm_para.h and they will be
used by SEV-SNP.
To ensure that it is possible to include both <linux/kvm_para.h> and
"standard-headers/asm-x86/kvm_para.h" without conflicts, provide
linux/kvm_para.h as a portable header too, and forward linux-headers/
files to those in include/standard-headers. Note that <linux/kvm_para.h>
will include architecture-specific definitions as well, but
"standard-headers/linux/kvm_para.h" will not because it can be used in
architecture-independent files.
This could easily be extended to other architectures, but right now
they do not need any symbol in their specific kvm_para.h files.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux has <misc/pvpanic.h>, not <linux/pvpanic.h>. Use the same
directory for QEMU's include/standard-headers/ copy.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Afer commit 3efc75ad9d ("scripts/update-linux-headers.sh: Remove
temporary directory inbetween", 2024-05-29), updating linux-headers/
results in errors such as
cp: cannot stat '/tmp/tmp.1A1Eejh1UE/headers/include/asm/bitsperlong.h': No such file or directory
because Loongarch does not have an asm/bitsperlong.h file and uses the
generic version. Before commit 3efc75ad9d, the missing file would
incorrectly cause stale files to be included in linux-headers/. The files
were never committed to qemu.git, but were wrong nevertheless. The build
would just use the system version of the files, which is opposite to
the idea of importing Linux header files into QEMU's tree.
Create forwarding headers, resembling the ones that are generated during a
kernel build by scripts/Makefile.asm-generic, if a file is only installed
under include/asm-generic/.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running the update-linx-headers.sh script, it currently fails with:
scripts/update-linux-headers.sh: line 73: .../qemu/standard-headers/asm-x86/setup_data.h: No such file or directory
The "include" folder is obviously missing here - no clue how this could
have worked before?
Fixes: 66210a1a30 ("scripts/update-linux-headers: Add setup_data.h to import list")
Message-ID: <20240527060126.12578-1-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are reusing the same temporary directory for installing the headers
of all targets, so there could be stale files here when switching from
one target to another. Make sure to delete the folder before installing
a new set of target headers into it.
Message-ID: <20240527060243.12647-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we are building for OSS-Fuzz, we want to ensure that the fuzzer
targets are actually created, regardless of leaks. Leaks will be
detected by the subsequent tests of the individual fuzz-targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240527150001.325565-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Running "install_headers" in the Linux source tree is fairly
unfriendly as out-of-tree builds will start complaining about the
kernel source being non-pristine. As we have a temporary directory for
the install we should also do the build step here. So now we have:
$tmpdir/
$blddir/
$hdrdir/
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240514174253.694591-3-alex.bennee@linaro.org>
The block migration has been considered obsolete since QEMU 8.2 in
favor of the more flexible storage migration provided by the
blockdev-mirror driver. Two releases have passed so now it's time to
remove it.
Deprecation commit 66db46ca83 ("migration: Deprecate block
migration").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
For union types, the tag member is known only after .check().
We used to code this in a simple way: QAPISchemaVariants attribute
.tag_member was None for union types until .check().
Since this complicated typing, recent commit "qapi/schema: fix typing
for QAPISchemaVariants.tag_member" hid it behind a property.
The previous commit lets us treat .tag_member just like the other
attributes that become known only in .check(): declare, but don't
initialize it in .__init__().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaVariants.check()'s code is almost entirely conditional on
union vs. alternate type.
Move the conditional code to QAPISchemaBranches.check() and
QAPISchemaAlternatives.check(), where the conditions are always
satisfied.
Attribute QAPISchemaVariants.tag_name is now only used by
QAPISchemaBranches. Move it there.
Refactor the three types' .__init__() to make them a bit simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A previous commit narrowed the type of
QAPISchemaAlternateType.variants from QAPISchemaVariants to
QAPISchemaAlternatives. Rename it to .alternatives.
Same for .__init__() parameter @variants.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A previous commit narrowed the type of QAPISchemaObjectType.variants
from QAPISchemaVariants to QAPISchemaBranches. Rename it to
.branches.
Same for .__init__() parameter @variants.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A previous commit narrowed the type of .visit_alternate_type()
parameter @variants from QAPISchemaVariants to QAPISchemaAlternatives.
Rename it to @alternatives.
One of them passes @alternatives to helper function
gen_visit_alternate(). Rename its @variants parameter to
@alternatives as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The previous commit narrowed the type of .visit_object_type()
parameter @variants from QAPISchemaVariants to QAPISchemaBranches.
Rename it to @branches.
Same for .visit_object_type_flat().
A few of these pass @branches to helper functions:
QAPISchemaGenRSTVisitor.visit_object_type() to ._nodes_for_members()
and ._nodes_for_variant_when(), and
QAPISchemaGenVisitVisitor.visit_object_type() to
gen_visit_object_members(). Rename the helpers' @variants parameters
to @branches as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaVariants represents either a union type's branches, or an
alternate type's alternatives. Much of its code is conditional on
which one it actually is.
Create QAPISchemaBranches for branches, and QAPISchemaAlternatives for
alternatives, both subtypes of QAPISchemaVariants.
Replace QAPISchemaVariants by one of them where possible. Keep it
only where we actually deal with either of them.
QAPISchemaVariants.__init__() takes @tag_name and @tag_member, where
exactly one must be None: @tag_name for alternatives, @tag_member for
branches. Let QAPISchemaBranches.__init__() take just @tag_name, and
QAPISchemaAlternatives.__init__() take just @tag_member.
A later patch will move the conditional code to the subtypes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
All user emulation headers are now under include/user/.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240428221450.26460-3-philmd@linaro.org>
Upgrading the s390x runner exposed some packages are not available for
it. Add an additional optional stage we only enable for arm64/x86_64
for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240426153938.1707723-2-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit d424db2354 removed an instance of strerrorname_np() because it
was breaking building with musl libc. A recent RISC-V patch ended up
re-introducing it again by accident.
Put this function in the baddies list in checkpatch.pl to avoid this
situation again. This is what it will look like next time:
$ ./scripts/checkpatch.pl 0001-temp-test.patch
ERROR: use strerror() instead of strerrorname_np()
#22: FILE: target/riscv/kvm/kvm-cpu.c:1058:
+ strerrorname_np(errno));
total: 1 errors, 0 warnings, 10 lines checked
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Markus Armbruster
Nicholas Piggin
Stefano Garzarella
Daniel P. Berrangé
Zhao Liu
John Snow
Paolo Bonzini
Peter Maydell
Shameer Kolothum
Yuan Liu
zhenwei pi
Philippe Mathieu-Daudé
Xin Li
Alex Bennée
Thomas Huth
Alexander Bulekov
Fabiano Rosas
Daniel Henrique Barboza