s390x is our only big endian host in our CI, so building and testing QEMU
there is quite valuable. Thus let's also test the other targets with
additional jobs (also using different sets of pre-installed libraries to
get a better coverage of the things that we test).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200608114049.4693-1-thuth@redhat.com>
As part of migrating things from Travis to GitLab add the acceptance
tests. To do this:
- rename system1 to system-ubuntu-main
- rename system2 to system-fedora-misc
- split into build/check/acceptance
- remove -j from check stages
- use artifacts to save build stage
- add post acceptance template and use
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-31-alex.bennee@linaro.org>
The git-submodule.sh script is called by make and initialize the
submodules listed in the GIT_SUBMODULES variable generated by
./configure.
SLOF is required for building the s390-ccw firmware on s390x, since
it is using the libnet code from SLOF for network booting.
Add it to the GIT_SUBMODULES when building the s390-ccw firmware.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200615074919.12552-1-f4bug@amsat.org>
[thuth: Tweaked the commit message a little bit]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we can select the second serial console in the acceptance tests
(see commit 746f244d97 "Allow to use other serial consoles than default"),
we can also test the sh4 image from the QEMU advent calendar 2018.
Message-Id: <20200515164337.4899-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
They will still run but they won't get in the way of the result.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200605154929.26910-6-alex.bennee@linaro.org>
Our configure script does not look for clang++ automatically, so we
should use --cxx=clang++ to make sure that we test our C++ code with
Clang, too. And while we're at it, also use --host-cc=clang here
to avoid that we use the normal "cc" as host C compiler.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200518083316.25065-1-thuth@redhat.com>
Message-Id: <20200520140541.30256-4-alex.bennee@linaro.org>
Since the s390x containers do not allow KVM, we only compile-test
the --disable-tcg build on s390x and do not run the qtests. Thus,
it does not make sense to install genisoimage here, and it also does
not make sense to build the s390-ccw.img here again - it is simply
not used without the qtests.
On the other hand, if we do not build the s390-ccw.img anymore, we
can also compile with Clang - so let's use that compiler here to
get some additional test coverage.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200512133849.10624-1-thuth@redhat.com>
Message-Id: <20200513175134.19619-3-alex.bennee@linaro.org>
This seems to be timing out quite often and occasionally running out
of disk space. Relegate it to light duties.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200501111505.4225-5-alex.bennee@linaro.org>
This keeps breaking on Travis so lets just fall back to the Cirrus CI
builds which seem to be better maintained. Fix up the comments while
we are doing this as we never had a windows build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200501111505.4225-3-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200501111505.4225-2-alex.bennee@linaro.org>
Keep all acceptance-test assets in the same cache bucket.
As of v5.0.0-rc1, the cache is 2610.11MB:
https://travis-ci.org/github/philmd/qemu/jobs/670558103
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200403172919.24621-6-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a job to build QEMU on s390x with TCG disabled, so
this configuration won't bitrot over time.
This job is quick, running check-unit: Ran for 5 min 30 sec
https://travis-ci.org/github/philmd/qemu/jobs/665456423
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200322154015.25358-1-philmd@redhat.com>
Message-Id: <20200323161514.23952-12-alex.bennee@linaro.org>
This acceptance test, validates that a full blown Linux guest can
successfully boot in QEMU. In this specific case, the guest chosen is
Fedora version 31.
* x86_64, pc-i440fx and pc-q35 machine types, with TCG and KVM as
accelerators
* aarch64 and virt machine type, with TCG and KVM as accelerators
* ppc64 and pseries machine type with TCG as accelerator
* s390x and s390-ccw-virtio machine type with TCG as accelerator
The Avocado vmimage utils library is used to download and cache the
Linux guest images, and from those images a snapshot image is created
and given to QEMU. If a qemu-img binary is available in the build
directory, it's used to create the snapshot image, so that matching
qemu-system-* and qemu-img are used in the same test run. If qemu-img
is not available in the build tree, one is attempted to be found
installed system-wide (in the $PATH). If qemu-img is not found in the
build dir or in the $PATH, the test is canceled.
The method for checking the successful boot is based on "cloudinit"
and its "phone home" feature. The guest is given an ISO image with
the location of the phone home server, and the information to post
(the instance ID). Upon receiving the correct information, from the
guest, the test is considered to have PASSed.
This test is currently limited to user mode networking only, and
instructs the guest to connect to the "router" address that is hard
coded in QEMU.
To create the cloudinit ISO image that will be used to configure the
guest, the pycdlib library is also required and has been added as
requirement to the virtual environment created by "check-venv".
The console output is read by a separate thread, by means of the
Avocado datadrainer utility module.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20200317141654.29355-3-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Since commit f5852efa29 we can display GLib errors with the QEMU
error reporting API. Set it to the 'error' level, as this helps
understanding failures from QEMU calls to GLib on Travis-CI.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200316101544.22361-1-philmd@redhat.com>
Message-Id: <20200316172155.971-6-alex.bennee@linaro.org>
These are used for the acceptance framebuffer tests to count Tux. As
we need slightly newer python3 for opencv we bump up to bionic.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200303150622.20133-10-alex.bennee@linaro.org>
As we can build tools on OS X we should check we don't break build
when we submit new codes.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200302154630.45620-3-lvivier@redhat.com>
Message-Id: <20200303150622.20133-7-alex.bennee@linaro.org>
Add it to several build systems to make testing good.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This still seems to be a problem for Travis.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200225124710.14152-8-alex.bennee@linaro.org>
This fixes the following warnings Travis has detected on the
YAML configuration:
- 'on root: missing os, using the default "linux"'
- 'on root: the key matrix is an alias for jobs, using jobs'
- 'on jobs.include.python: unexpected sequence, using the first value (3.5)'
- 'on jobs.include.python: unexpected sequence, using the first value (3.6)'
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200207210124.141119-2-wainersm@redhat.com>
Message-Id: <20200225124710.14152-7-alex.bennee@linaro.org>
Since we can now use a s390x host on Travis, we can also build and
test the s390-ccw bios images there. For this we have to make sure
that roms/SLOF is checked out, too, and then move the generated *.img
files to the right location before running the tests.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200206202543.7085-1-thuth@redhat.com>
Message-Id: <20200225124710.14152-6-alex.bennee@linaro.org>
The 2018 edition of the QEMU advent calendar 2018 featured Linux images
for various non-x86 machines. We can use them for a boot tests in our
acceptance test suite.
Let's also make sure that we build the corresponding machines in Travis.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200124170325.30072-1-thuth@redhat.com>
[PMD: Rebased, --python=python3 parameter dropped in commit 5311cb12e]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The extract_from_rpm() method added for the PVH acceptance tests needs
rpm2cpio to extract a vmlinux binary from an RPM.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1580914565-19675-4-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200204105142.21845-1-alex.bennee@linaro.org>
I've theorised that a parallel build-tcg is somehow getting confused
when two fedora-30 based cross compilers attempt to build at the same
time. From one data-point so far this may fix the problem although the
plugins job runs quite close to timeout.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-18-alex.bennee@linaro.org>
While it shouldn't cause problems we will never get useful information
from cris as it has yet to be converted to the common translator loop.
It also causes the Travis CI to fail for weird reasons which I have so
far been unable to replicate on a normal Xenial system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-17-alex.bennee@linaro.org>
This was a crutch when we introduced it - however it does have the
disadvantage of causing tests to timeout with large amounts of logs.
Lets drop it and see if the stability has improved since.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-16-alex.bennee@linaro.org>
At least for check-tcg we can split the build phase from the test
phase and do the former in parallel. While we are at it drop the V=1
for the check-tcg part as it just generates a lot more noise in the
logs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-15-alex.bennee@linaro.org>
The arm64 hardware was especially hit by only building on 3 of the 32
available cores. Introduce a JOBS environment variable which we use
for all parallel builds. We still run the main checks single threaded
though so to make it easier to spot hangs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-12-alex.bennee@linaro.org>
We shall be adding more common early setup in a future commit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-11-alex.bennee@linaro.org>
It looks like the xenial tooling doesn't like something in our setup.
We should probably be moving to bionic for everything soon
anyway (libssh aside).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-10-alex.bennee@linaro.org>
As we require Python3 since commit ddf9069963, we don't need to
explicit it with the --python=/usr/bin/python3 configure option.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200125184217.30034-1-f4bug@amsat.org>
Message-Id: <20200203090932.19147-8-alex.bennee@linaro.org>
The genisoimage program is required for tests/cdrom-test
tests, otherwise they are skipped. The current Travis
environments do not provide it by default, so let's
explicitly require the genisoimage package.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200110191254.11303-2-wainersm@redhat.com>
Message-Id: <20200203090932.19147-5-alex.bennee@linaro.org>
Some of the CFLAGS that are discovered during configure, for example
compiler warnings, are being included on the linker command line because
QEMU_CFLAGS is added to it. Other flags, such as the -m32, appear twice
because they are included in both QEMU_CFLAGS and LDFLAGS. All this
leads to confusion with respect to what goes in which Makefile variables
(and we have plenty).
So, introduce QEMU_LDFLAGS for flags discovered by configure, following
the lead of QEMU_CFLAGS, and stop adding to it:
1) options that are already in CFLAGS, for example "-g"
2) duplicate options
At the same time, options that _are_ needed by both compiler and linker
must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer.
This is mostly -fsanitize options. For now, --extra-cflags has this behavior
(but --extra-cxxflags does not).
Meson will not include CFLAGS on the linker command line, do the same in our
build system as well.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our python3 requirements now outstrip those of the build. While we are
at it we can move more of the special casing for Mac into the one
build we have.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Rather than keep the hack in the global code lets "Think Different"
and have a special copy for MacOSX.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Currently build and test commands are a single step in a
Travis's `script` block. In order to see the output
of the tests one needs to scroll down the log to find where
the build messages ended and the limit is not clear. If
they were in different steps then Travis would print the
result build command, which can be easily grep'ed.
So this change is made to detach those commands
to ease the visualization of the output.
Note that all steps on the `script` block is executed regardless
if one previous has failed. To overcome it, let's save the
return code of the build then check whether succeed or failed on
the test step.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191230184327.2800-3-wainersm@redhat.com>
The acceptance tests build on Travis is configured to print
the entire Avocado's job log in case any test fail. Usually one is
interested on failed tests only though. So this change the Travis
configuration in order to show the log of tests which status is
different from 'PASS' and 'SKIP' only. Note that 'CANCEL'-ed tests
will have the log printed too because it can help to debug some
condition on CI environment which is not being fulfilled.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191230184327.2800-2-wainersm@redhat.com>
We test clang with the MAIN_SOFTMMU_TARGETS twice, once without
sanitizers and once with sanitizers enabled. That's somewhat redundant
since if compilation and tests succeeded with sanitizers enabled, it
should also work fine without sanitizers. Thus remove the clang entry
without sanitizers to speed up the CI testing a little bit.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191119092147.4260-1-thuth@redhat.com>
Most developers are using out-of-tree builds and it was discussed in the past
to only allow those. To prepare for the transition, use out-of-tree builds
in all continuous integration jobs.
Based on a patch by Marc-André Lureau.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org>
Message-Id: <1576074829-56711-1-git-send-email-pbonzini@redhat.com>
Travis recently added the possibility to test on these architectures,
too, so let's enable them in our travis.yml file to extend our test
coverage.
Unfortunately, the libssh in this Ubuntu version (bionic) is in a pretty
unusable Frankenstein state and libspice-server-dev is not available here,
so we can not use the global list of packages to install, but have to
provide individual package lists instead.
Also, some of the iotests crash when using "dist: bionic" on arm64
and ppc64le, thus these two builders have to use "dist: xenial" until
the problem is understood / fixed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20191204154618.23560-8-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
So far we only have compile coverage for tci. But since commit
2f160e0f97 ("tci: Add implementation
for INDEX_op_ld16u_i64") has been included now, we can also run the
"tcg" and "qtest" tests with tci, so let's enable them in Travis now.
Since we don't gain much additional test coverage by compiling all
targets, and TCI is broken e.g. with the Sparc targets, we also limit
the target list to a reasonable subset now (which should still get us
test coverage by tests/boot-serial-test for example).
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191204083133.6198-1-thuth@redhat.com>
[AJB: just --enable-debug-tcg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Commit 7e46261368 converted virtfs-proxy-helper to using libcap-ng. There
aren't any users of libcap anymore. No need to install libcap-dev.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
It's broken so it's no longer helping. The latest Xcode is covered by
Cirrus.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191127132430.3681-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The older clangs are still struggling to build and run everything
withing the 50 minute timeout so lets lighten the load a bit more. We
still have coverage for GCC and hopefully no obscure 32 bit guest only
breakages slip through the cracks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Let's challenge the convention that doing more at a time helps. It
certainly doesn't tell you unambiguously where in the test cycle you
were before the test hangs and exceeds the job time limit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-18-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-13-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Create a new cache for the --enable-debug-tcg builds which is separate
from the normal debug builds which generate different code. We also
enable debug-tcg for the new plugins based builds as we want to ensure
any breakage to TCG is picked up by the sanity checks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Thomas Huth
Alex Bennée
Philippe Mathieu-Daudé
Philippe Mathieu-Daudé
Cleber Rosa
Laurent Vivier
Juan Quintela
Wainer dos Santos Moschetta
Liam Merwick
Paolo Bonzini
Eduardo Habkost
Greg Kurz