Since we are about to remove all support for PPC 405, start by
removing the tests referring to the ref405ep machine.
Link: https://lore.kernel.org/qemu-devel/20250110141800.1587589-2-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250204080649.836155-2-clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Requiring TARGET_PAGE_MASK to be defined gets in the way of building
this unit once. qemu_target_page_mask() will tell us what it is.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-21-alex.bennee@linaro.org>
It was identified that those tests randomly fail with a synchronous
exception at boot (reported by EDK2).
While we solve this problem, report failure immediately so tests don't
timeout in CI.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250303185745.2504842-1-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-20-alex.bennee@linaro.org>
GCC versions at least 12 through 15 incorrectly report a warning
about code in sha1.c:
tests/tcg/multiarch/sha1.c:161:13: warning: ‘SHA1Transform’ reading 64 bytes from a region of size 0 [-Wstringop-overread]
161 | SHA1Transform(context->state, &data[i]);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a piece of stock library code for doing SHA1 which we've
simply copied, rather than writing ourselves. The bug has been
reported to upstream GCC (about a different library's use of this
code):
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106709
For our test case, since this isn't our original code and there isn't
actually a bug in it, suppress the incorrect warning rather than
trying to modify the code to work around the compiler issue.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2328
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250227141343.1675415-1-peter.maydell@linaro.org>
[AJB: -Wno-unknown-warning-option for clang's sake]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-18-alex.bennee@linaro.org>
We allow things like:
tests/tcg/i386/test-i386-bmi2.c:124:35: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
assert(result == (mask & ~(-1 << 30)));
in the main code, so allow it for the test.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-17-alex.bennee@linaro.org>
In preparation for enabling clang and avoiding:
error: '_Static_assert' with no message is a C2x extension [-Werror,-Wc2x-extensions]
let us just add the message to silence the warning.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-15-alex.bennee@linaro.org>
The main multiarch tests should compile for any POSIX system, however
test-vma's usage of MAP_NORESERVE makes it a linux-only test. Simply
moving the source file is enough for the build logic to skip on BSD's.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-14-alex.bennee@linaro.org>
On my fairly beefy machine the timeout was triggering leaving a
corrupted disk image due to power being pulled before the disk had
synced. Triple the timeout to avoid this.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-13-alex.bennee@linaro.org>
The alpine baseline has also been updated in the meantime so we need
to address that while we are at it.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-12-alex.bennee@linaro.org>
Not all platforms use the '.so' suffix for shared libraries,
which is how plugins are built. Use the recently introduced
dso_suffix() helper to get the proper host suffix.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2804
Suggested-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250220080215.49165-4-philmd@linaro.org>
[AJB: moved plugin_file into testcase.py]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-11-alex.bennee@linaro.org>
Introduce a helper to get the default shared library
suffix used on the host.
Suggested-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250220080215.49165-3-philmd@linaro.org>
[AJB: dropped whitespace cmd.py damage]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-10-alex.bennee@linaro.org>
./tests/functional/test_aarch64_tcg_plugins.py needs to have plugin
libinsn built. However, it's not listed as a dependency, so meson can't
know it needs to be built.
Thus, we keep track of all plugins, and add them as an explicit
dependency.
Fixes: 4c134d07b9 ("tests: add a new set of tests to exercise plugins")
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-9-alex.bennee@linaro.org>
Update to the most recent aarch64_virt_gpu image. The principle
differences are:
- target a v8.0 baseline CPU
- latest vkmark (2025.1)
- actually uses the rootfs (previously was initrd)
- rootfs includes more testing tools for interactive use
See README.md in https://fileserver.linaro.org/s/ce5jXBFinPxtEdx for
details about the image creation and the buildroot config.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-8-alex.bennee@linaro.org>
Add two more test modes using glmark2-wayland to exercise the OpenGL
pass-through modes with virgl. Virgl can run with or without the
hostmem blob support. To avoid repeating ourselves too much we make
the initial pass a simple --validate pass.
We might want to eventually add more directed tests and individual
features later on but the glmark/vkmark tests are a good general
smoke test for accelerated 3D.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-7-alex.bennee@linaro.org>
While running the new GPU tests it was noted that the proprietary
nVidia driver barfed when run under the sanitiser:
2025-02-20 11:13:08,226: [11:13:07.782] Output 'headless' attempts
EOTF mode SDR and colorimetry mode default.
2025-02-20 11:13:08,227: [11:13:07.784] Output 'headless' using color
profile: stock sRGB color profile
and that's the last thing it outputs.
The sanitizer reports that when the framework sends the SIGTERM
because of the timeout we get a write to a NULL pointer (but
interesting not this time in an atexit callback):
UndefinedBehaviorSanitizer:DEADLYSIGNAL
==471863==ERROR: UndefinedBehaviorSanitizer: SEGV on unknown address
0x000000000000 (pc 0x7a18ceaafe80 bp 0x000000000000 sp 0x7ffe8e3ff6d0
T471863)
==471863==The signal is caused by a WRITE memory access.
==471863==Hint: address points to the zero page.
#0 0x7a18ceaafe80
(/lib/x86_64-linux-gnu/libnvidia-eglcore.so.535.183.01+0x16afe80)
(BuildId: 24b0d0b90369112e3de888a93eb8d7e00304a6db)
#1 0x7a18ce9e72c0
(/lib/x86_64-linux-gnu/libnvidia-eglcore.so.535.183.01+0x15e72c0)
(BuildId: 24b0d0b90369112e3de888a93eb8d7e00304a6db)
#2 0x7a18ce9f11bb
(/lib/x86_64-linux-gnu/libnvidia-eglcore.so.535.183.01+0x15f11bb)
(BuildId: 24b0d0b90369112e3de888a93eb8d7e00304a6db)
#3 0x7a18ce6dc9d1
(/lib/x86_64-linux-gnu/libnvidia-eglcore.so.535.183.01+0x12dc9d1)
(BuildId: 24b0d0b90369112e3de888a93eb8d7e00304a6db)
#4 0x7a18e7d15326 in vrend_renderer_create_fence
/usr/src/virglrenderer-1.0.0-1ubuntu2/obj-x86_64-linux-gnu/../src/vrend_renderer.c:10883:26
#5 0x55bfb6621871 in virtio_gpu_virgl_process_cmd
The #dri-devel channel confirmed:
<digetx> stsquad: nv driver is known to not work with venus, don't use
it for testing
So lets skip running the test to avoid known failures. As we now use
vulkaninfo to probe we also need to handle the case where there is no
Vulkan driver configured for the hardware.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[AJB: also skip if vulkaninfo can't find environment]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-6-alex.bennee@linaro.org>
The message:
MESA-VIRTIO: debug: stuck in fence wait with iter at %d
Seems to occur more often on debug builds. Rather than waiting for our
long timeout to hit we might as well bail as soon as we see the
message.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-5-alex.bennee@linaro.org>
It's possible to build QEMU without support for the GL enabled GPU
devices and we can catch that earlier with an explicit check.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-4-alex.bennee@linaro.org>
In preparation for handling more tests split out the common machine
setup details from the test specific stuff and add a helper for
launching the weston test. Instead of searching for "vkmark score" we
set a custom PS1 and wait for a successful completion. This ensures we
capture the score in the console log which otherwise wouldn't log
anything.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-3-alex.bennee@linaro.org>
I want to expand the number of tests to cover a wide range of
configurations. That starts with splitting off from the normal virt
test from which it doesn't really share much code. We can also reduce
the timeout of the original virt test now it is now longer burdened
with testing the GPU.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-2-alex.bennee@linaro.org>
In ASPEED SDK v09.05, the naming convention for pre-built images has been
updated. The pre-built image for AST2700 A0 has been renamed to
ast2700-a0-default, while ast2700-default is now used for AST2700 A1.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-28-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Modified the temperature hwmon path to use a wildcard to handle different SDK
versions: "cat /sys/bus/i2c/devices/1-004d/hwmon/hwmon*/temp1_input".
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-27-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Added a new method "start_ast2700_test" to the "AST2x00MachineSDK" class and
this method centralizes the logic for starting the AST2700 test, making it
reusable for different test cases.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-26-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Use do_test_arm_aspeed_openbmc() to run the latest OpenBMC firmware
build of the bletchley BMC.
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250129071820.1258133-6-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Use the new do_test_arm_aspeed_openbmc() routine to run the latest
OpenBMC firmware build of the romulus BMC. Remove the older routine
which is now unused.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250129071820.1258133-4-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The OpenBMC images currently used by QEMU to test the Aspeed machines
are rather old. To prepare an update to the latest builds, we need to
adjust the console patterns. Introduce a new routine to preserve the
current tests.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250129071820.1258133-2-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The kernel that is used in the sx1 test prints the usual Linux log
onto the serial console, but this test currently ignores it. To
make sure that the serial device is working properly, let's check
for some strings in the output here.
While we're at it, also add the test to the corresponding section
in the MAINTAINERS file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250226104833.1176253-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio_balloon test is currently hanging for unknown reasons
when being run on the shared gitlab CI runners (which don't provide
KVM, thus it's running in TCG mode there). All other functional tests
that use the same asset (the Fedora 31 kernel) have already been
marked to work only with KVM in the past, so those other tests are
skipped on the shared gitlab CI runners. As long as the problem isn't
fully understood and fixed, let's do the same with the virtio_balloon
test to avoid that the CI is failing here.
Message-ID: <20250307063904.1081961-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There are two race conditions in the recently added virtio balloon
test
* The /dev/vda device node is not ready
* The virtio-balloon driver has not issued the first stats refresh
To fix the former, monitor dmesg for a line about 'vda'.
To fix the latter, retry the stats query until seeing fresh data.
Adding 'quiet' to the kernel command line reduces serial output
which otherwise slows boot, making it less likely to hit the former
race too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250304183340.3749797-1-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[thuth: Break long line to avoid checkpatch error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We run the gitlab-CI with the untrusted tests enabled, and
the test_replay_mips64el_malta_5KEc_cpio subtest is rather slow,
so this already hit the standard 90 seconds timeout in the CI.
Increase the timeout for more headroom.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20250305074353.52552-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The kernel has a driver for the pcnet NIC included, and the initrd has
a "tftp" command, so we can test a simple network transfer here, too.
Message-ID: <20250227103915.19795-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are going to use this code in other tests, too, so let's move it
to the qemu_test module to be able to re-use it more easily.
Message-ID: <20250227103915.19795-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The zstd command will print incremental decompression progress to stderr
when running. Fortunately it is not on stdout as that would confuse the
TAP parsing, but we should still not have this printed. By switching
from 'check_call' to 'run' with the check=True and capture_output=True
we'll get the desired silence on success, and on failure the raised
exception will automatically include stdout/stderr data for diagnosis
purposes.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250228102738.3064045-8-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250228102738.3064045-7-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the QEMU binary was built for a 32-bit ELF target we cannot run the
memory address space tests as they all require ability to address more
RAM that can be represented on 32-bit.
We can't use a decorator to skip the tests as we need setUp() to run to
pick the QEMU binary, thus we must call a method at the start of each
test to check and skip it. The functional result is effectively the
same as using a decorator, just less pretty. This code will go away when
32-bit hosts are full dropped from QEMU.
The code allows any non-ELF target since all macOS versions supported
at 64-bit only and we already dropped support for 32-bit Windows.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250228102738.3064045-6-berrange@redhat.com>
[thuth: Add missing byteorder='little' to from_bytes()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We already have "qemu/compiler.h" for compiler-specific arrangements,
automatically included by "qemu/osdep.h" for each source file. No
need to explicitly include a header for a Clang particularity.
Suggested-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250117170201.91182-1-philmd@linaro.org>
We use OrderedDict to ensure dictionary order is insertion order.
Plain dict does that since Python 3.6, but it wasn't guaranteed until
3.7. Since we have 3.7 now, replace OrderedDict by dict.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250227080757.3978333-3-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
maxmem=4G is too large to address on 32-bit hosts, so reduce it
to 2G since the tuxrun tests don't actually need such an elevated
memory limit.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250228102738.3064045-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'qemu_bin' field is currently set on the class, despite being
accessed as if it were an object instance field with 'self.qemu_bin'.
This is no obvious need to have it as a class field, so move it into
the object instance.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250228102738.3064045-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This was copied over from avocado but has not been used in the new
functional tests.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250228102738.3064045-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This function name conflicts with one used by a future generic thread pool
function and it was only used by one test anyway.
Update the trace event name in thread_pool_submit_aio() accordingly.
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/6830f07777f939edaf0a2d301c39adcaaf3817f0.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This commit adds tests to verify the correctness of query attribute
results related to the temperature feature. It ensures that querying
temperature attributes returns expected values.
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-ID: <20250225064243epcms2p8b7b59e7bf381bd68d30a6f59b40dea9f@epcms2p8>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Test 162 recently started failing for me for no obvious reasons (I
did not spot any suspicious commits in this area), but looking in
the 162.out.bad log file, there was a suspicious message at the end:
qemu-nbd: Cannot lock pid file: Resource temporarily unavailable
And indeed, the test starts the NBD server two times, without stopping
the first server before running the second one, so the second one can
indeed fail to lock the PID file. Thus let's make sure to stop the
first server before the test continues with the second one. With this
change, the test works fine for me again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250225070650.387638-1-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This test depends on TarFile.addfile() to add tar member header without
writing the member data, which we write ourself using qemu-nbd. Python
3.13 changed the function in a backward incompatible way[1] to require a
file object for tarinfo with non-zero size, breaking the test:
-[{"name": "vm.ovf", "offset": 512, "size": 6}, {"name": "disk", "offset": 1536, "size": 393216}]
+Traceback (most recent call last):
+ File "/home/stefanha/qemu/tests/qemu-iotests/302", line 118, in <module>
+ tar.addfile(disk)
+ ~~~~~~~~~~~^^^^^^
+ File "/usr/lib64/python3.13/tarfile.py", line 2262, in addfile
+ raise ValueError("fileobj not provided for non zero-size regular file")
+ValueError: fileobj not provided for non zero-size regular file
The new behavior makes sense for most users, but breaks our unusual
usage. Fix the test to add the member header directly using public but
undocumented attributes. This is more fragile but the test works again.
This also fixes a bug in the previous code - when calling addfile()
without a fileobject, tar.offset points to the start of the member data
instead of the end.
[1] https://github.com/python/cpython/pull/117988
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Message-ID: <20250228195708.48035-1-nirsof@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The code as written crashes when a free-form documentation block doesn't
start with a heading or subheading, for example:
| ##
| # Just text, no heading.
| ##
The code will attempt to use the `node` variable uninitialized. To fix,
create a generic block to insert the doc text into.
(This patch also removes a lingering pylint warning in the QAPIDoc
implementation that prevents getting a clean baseline to use for
forthcoming additions.)
Fixes: 43e0d14ee0 (docs/sphinx: fix extra stuff in TOC after freeform QMP sections)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250224033741.222749-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Test updated to cover this]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
From the time we added RVA22U64 until now the spec didn't declare 'RVB'
as a dependency, using zba/zbb/zbs instead. Since then the RVA22 spec
[1] added the following in the 'RVA22U64 Mandatory Extensions' section:
"B Bit-manipulation instructions
Note: The B extension comprises the Zba, Zbb, and Zbs extensions. At the
time of RVA22U64's ratification, the B extension had not yet been
defined, and so RVA22U64 explicitly mandated Zba, Zbb, and Zbs instead.
Mandating B is equivalent."
It is also equivalent to QEMU (see riscv_cpu_validate_b() in
target/riscv/tcg/tcg-cpu.c).
Finally, RVA23U64 [2] directly mentions RVB as a mandatory extension,
not citing zba/zbb/zbs.
To make it clear that RVA23U64 will extend RVA22U64 (i.e. RVA22 is a
parent of RVA23), use RVB in RVA22U64 as well.
(bios-tables-test change: RVB added to riscv,isa)
[1] https://github.com/riscv/riscv-profiles/blob/main/src/profiles.adoc#61-rva22u64-profile
[2] https://github.com/riscv/riscv-profiles/blob/main/src/rva23-profile.adoc#rva23u64-profile
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250115184316.2344583-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
ssu64xl is defined in RVA22 as:
"sstatus.UXL must be capable of holding the value 2 (i.e., UXLEN=64 must
be supported)."
This is always true in TCG and it's mandatory for RVA23, so claim
support for it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250115184316.2344583-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cédric Le Goater
Alex Bennée
Pierrick Bouvier
Peter Maydell
Philippe Mathieu-Daudé
Jamin Lin
Thomas Huth
Daniel P. Berrangé
Markus Armbruster
Maciej S. Szmigiero
Keoseong Park
Nir Soffer
John Snow
Daniel Henrique Barboza