libvhost-user implements several vring features without advertising
them. There is no way for the vhost-user master to detect support for
these features.
Things more or less work today because QEMU assumes the vhost-user
backend always implements certain feature bits like
VIRTIO_RING_F_EVENT_IDX. This is not documented anywhere.
This patch explicitly advertises features implemented in libvhost-user
so that the vhost-user master does not need to make undocumented
assumptions.
Feature bits that libvhost-user now advertises can be removed from
vhost-user-blk.c. Devices should not be responsible for advertising
vring feature bits, that is libvhost-user's job.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200529161338.456017-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Historically, VMs with vhost-user devices could hot-add memory a maximum
of 8 times. Now that the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS
protocol feature has been added, VMs with vhost-user backends which
support this new feature can support a configurable number of ram slots
up to the maximum supported by the target platform.
This change adds VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS support for
backends built with libvhost-user, and increases the number of supported
ram slots from 8 to 32.
Memory hot-add, hot-remove and postcopy migration were tested with
the vhost-user-bridge sample.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1588533678-23450-11-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS protocol feature is
enabled, on memory hot-unplug qemu will transmit memory regions to
remove individually using the new message VHOST_USER_REM_MEM_REG
message. With this change, vhost-user backends build with libvhost-user
can now unmap individual memory regions when receiving the
VHOST_USER_REM_MEM_REG message.
Qemu only sends VHOST_USER_REM_MEM_REG messages when the
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS feature is negotiated, and
support for that feature has not yet been added in libvhost-user, this
new functionality is not yet used.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1588533678-23450-10-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS is enabled, qemu will
transmit memory regions to a backend individually using the new message
VHOST_USER_ADD_MEM_REG. With this change vhost-user backends built with
libvhost-user can now map in new memory regions when VHOST_USER_ADD_MEM_REG
messages are received.
Qemu only sends VHOST_USER_ADD_MEM_REG messages when the
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS feature is negotiated, and
since it is not yet supported in libvhost-user, this new functionality
is not yet used.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1588533678-23450-9-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VHOST_USER_GET_MAX_MEM_SLOTS message allows a vhost-user backend to
specify a maximum number of ram slots it is willing to support. This
change adds support for libvhost-user to process this message. For now
the backend will reply with 8 as the maximum number of regions
supported.
libvhost-user does not yet support the vhost-user protocol feature
VHOST_USER_PROTOCOL_F_CONFIGIRE_MEM_SLOTS, so qemu should never
send the VHOST_USER_GET_MAX_MEM_SLOTS message. Therefore this new
functionality is not currently used.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1588533678-23450-8-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In libvhost-user, the incoming postcopy migration path for setting the
backend's memory tables has become convolued. In particular, moving the
logic which starts generating faults, having received the final ACK from
qemu can be moved to a separate function. This simplifies the code
substantially.
This logic will also be needed by the postcopy path once the
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS feature is supported.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1588533678-23450-7-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
vu_queue_pop() returns memory that must be freed with free().
Cc: qemu-stable@nongnu.org
Reported-by: Coverity (CID 1421887 ALLOC_FREE_MISMATCH)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit d52c454aad ("contrib: add
vhost-user-gpu"), qemu-ga is linking with pixman.
This is because the Make-based build-system use a global namespace for
variables, and we rely on "main.o-libs" for different linking targets.
Note: this kind of variable clashing is hard to fix or prevent
currently. meson should help, as declarations have a linear
dependency and doesn't rely so much on variables and clever tricks.
Note2: we have a lot of main.c (or other duplicated names!) in
tree. Imho, it would be annoying and a bad workaroud to rename all
those to avoid conflicts like I did here.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1811670
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200311160923.882474-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for VHOST_USER_PROTOCOL_F_IN_BAND_NOTIFICATIONS, but
as it's not desired by default, don't enable it unless the device
implementation opts in by returning it from its protocol features
callback.
Note that I updated vu_set_vring_err_exec(), but didn't add any
sending of the VHOST_USER_SLAVE_VRING_ERR message as there's no
write to the err_fd today either.
This also adds vu_queue_notify_sync() which can be used to force
a synchronous notification if inband notifications are supported.
Previously, I had left out the slave->master direction handling
of F_REPLY_ACK, this now adds some code to support it as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Message-Id: <20200123081708.7817-7-johannes@sipsolutions.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The code here is odd, for example will it print out invalid
file descriptor numbers that were never sent in the message.
Clean that up a bit so it's actually possible to implement
a device that uses polling.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Message-Id: <20200123081708.7817-5-johannes@sipsolutions.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we use NULL, we just get the main program default mainloop
here. Using g_main_context_get_thread_default() has basically
the same effect, but it lets us start different devices in
different threads with different mainloops, which can be useful.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Message-Id: <20200123081708.7817-4-johannes@sipsolutions.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If you try to make a device implementation that can handle multiple
connections and allow disconnections (which requires overriding the
VHOST_USER_NONE handling), then glib will warn that we remove a src
while it's still on the mainloop, and will poll() an FD that doesn't
exist anymore.
Fix this by making vug_source_new() require pairing with the new
vug_source_destroy() so we can keep the GSource referenced in the
meantime.
Note that this requires calling the new API in vhost-user-input.
vhost-user-gpu also uses vug_source_new(), but never seems to free
the result at all, so I haven't changed anything there.
Fixes: 8bb7ddb78a ("libvhost-user: add glib source helper")
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Message-Id: <20200123081708.7817-3-johannes@sipsolutions.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is really simple, since we know whether a response is
already requested or not, so we can just send a (successful)
response when there isn't one already.
Given that, it's not all _that_ useful but the master can at
least be sure the message was processed, and we can exercise
more code paths using the example code.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Message-Id: <20200123081708.7817-2-johannes@sipsolutions.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: a5d2f6f877
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-14-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If a new setmemtable command comes in once the vhost threads are
running, it will remap the guests address space and the threads
will now be looking in the wrong place.
Fortunately we're running this command under lock, so we can
update the queue mappings so that threads will look in the new-right
place.
Note: This doesn't fix things that the threads might be doing
without a lock (e.g. a readv/writev!) That's for another time.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In future patches we'll be performing commands on the slave-fd driven
by commands on queues, since those queues will be driven by individual
threads we need to make sure they don't attempt to use the slave-fd
for multiple commands in parallel.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch is to add standard commands defined in docs/interop/vhost-user.rst
For vhost-user-* program
Signed-off-by: Micky Yun Chan (michiboo) <chanmickyyun@gmail.com>
Message-Id: <20191209015331.5455-1-chanmickyyun@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes:
../contrib/vhost-user-scsi/vhost-user-scsi.c:118:57: error: format specifies
type 'unsigned char' but the argument has type 'int' [-Werror,-Wformat]
g_warning("Unable to determine cdb len (0x%02hhX)", cdb[0] >> 5);
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The virtqueue element returned by vu_queue_pop() is allocated using
malloc(3) by virtqueue_alloc_element(). Use the matching free(3)
function instead of glib's g_free().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191119111626.112206-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use a zero-initialized VuVirtqInflightDesc struct to avoid
that scan-build reports that vq->resubmit_list[0].counter may
be garbage value in vu_check_queue_inflights().
Fixes: 5f9ff1eff ("libvhost-user: Support tracking inflight I/O in
shared memory")
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20191119075759.4334-1-xieyongji@baidu.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So far, the server leaves the posix shared memory object behind when
terminating, requiring the user to explicitly remove it in order to
start a new instance.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Claudio Fontana <claudio.fontana@suse.com>
Message-Id: <d938a62c-7538-9d2b-cc0a-13b240ab9141@web.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We've had a number of contributions from this domain. Mao has
confirmed they are company contributions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Again this is guess work based on public websites. Please confirm.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This simplifies the various has_feature() checks, we already
have vu_has_feature() but it checks features, not protocol
features.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Message-Id: <20190904065021.1360-1-johannes@sipsolutions.net>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It doesn't look like this could possibly work properly since
VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD is defined to 10, but the
dev->protocol_features has a bitmap. I suppose the peer this
was tested with also supported VHOST_USER_PROTOCOL_F_LOG_SHMFD,
in which case the test would always be false, but nevertheless
the code seems wrong.
Use has_feature() to fix this.
Fixes: d84599f56c ("libvhost-user: support host notifier")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Message-Id: <20190903200422.11693-1-johannes@sipsolutions.net>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This company has at least 7 contributors, add a domain-map entry.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190822231231.1306-1-philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The two files are not interchangeable but a change to one *might*
require a change to the other so lets flag that up with an explanation
of what both files are trying to achieve. While we are at it document
the many forms .mailmap can take in the header.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Just to get the (few) accidental uses of my private e-mail address
attributed correctly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190822122350.29852-3-armbru@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
gitm prints the rather cryptic message "interface not found, appended
to the last order". This is because filetypes.txt has filetype
interface, but neglects to mention it in order. Fix that.
Fixes: 2f28271d80
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190822122350.29852-2-armbru@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
contrib/elf2dmp has a source file which uses curl/curl.h;
although we link the final executable with CURL_LIBS, we
forgot to build this source file with CURL_CFLAGS, so if
the curl header is in a place that's not already on the
system include path then it will fail to build.
Add a line specifying the cflags needed for download.o;
while we are here, bring the specification of the libs
into line with this, since using a per-object variable
setting is preferred over adding them to the final
executable link line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190719100955.17180-1-peter.maydell@linaro.org
Existing vhost-user device backends, including vhost-user-scsi and
vhost-user-blk, support multiqueue but libvhost-user currently does not
advertise this.
VHOST_USER_PROTOCOL_F_MQ enables the VHOST_USER_GET_QUEUE_NUM request
needed for a vhost-user master to query the number of queues. For
example, QEMU's vhost-user-net master depends on
VHOST_USER_PROTOCOL_F_MQ for multiqueue.
If you're wondering how any device backend with more than one virtqueue
functions today, it's because device types with a fixed number of
virtqueues do not require querying the number of queues. Therefore the
vhost-user master for vhost-user-input with 2 virtqueues, for example,
doesn't actually depend on VHOST_USER_PROTOCOL_F_MQ. It just enables
virtqueues 0 and 1 without asking.
Let there be multiqueue!
Suggested-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190626074815.19994-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently libvhost-user is hardcoded to at most 8 virtqueues. The
device backend should decide the number of virtqueues, not
libvhost-user. This is important for multiqueue device backends where
the guest driver needs an accurate number of virtqueues.
This change breaks libvhost-user and libvhost-user-glib API stability.
There is no stability guarantee yet, so make this change now and update
all in-tree library users.
This patch touches up vhost-user-blk, vhost-user-gpu, vhost-user-input,
vhost-user-scsi, and vhost-user-bridge. If the device has a fixed
number of queues that exact number is used. Otherwise the previous
default of 8 virtqueues is used.
vu_init() and vug_init() can now fail if malloc() returns NULL. I
considered aborting with an error in libvhost-user but it should be safe
to instantiate new vhost-user instances at runtime without risk of
terminating the process. Therefore callers need to handle the vu_init()
failure now.
vhost-user-blk and vhost-user-scsi duplicate virtqueue index checks that
are already performed by libvhost-user. This code would need to be
modified to use max_queues but remove it completely instead since it's
redundant.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190626074815.19994-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VhostUserMsg request is reused as the reply by message processing
functions. This is risky since request fields may corrupt the reply if
the vhost-user message handler function forgets to re-initialize them.
Changing this practice would be very invasive but we can introduce a
helper function to make u64 payload replies safe. This also eliminates
code duplication in message processing functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190626074815.19994-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This should fix uninitialized fields found by coverity CID 1401762.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190605145829.7674-6-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This should fix coverity CID 1401704.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190605145829.7674-5-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
g_printerr() needs a trailing \n
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190605145829.7674-4-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This check shouldn't be necessary, since &error_fatal is given as
argument and will exit() on failure. However, this change should
silence coverity CID 1401761 & 1401705.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190605145829.7674-3-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Should fix coverity CID 1401760.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190605145829.7674-2-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit d52c454aad "contrib: add vhost-user-gpu" and "c68082c43a
virtio-gpu: split virtio-gpu-pci & virtio-vga" created headers with
unusual header guard symbols. Clean them up
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190607141321.9726-1-armbru@redhat.com>
Commit 58ea30f514 "Clean up header guards that don't match their file
name" messed up contrib/elf2dmp/qemu_elf.h and
tests/migration/migration-test.h.
It missed target/cris/opcode-cris.h and
tests/uefi-test-tools/UefiTestToolsPkg/Include/Guid/BiosTablesTest.h
due to the scripts/clean-header-guards.pl bug fixed in the previous
commit.
Commit a8b991b52d "Clean up ill-advised or unusual header guards"
missed include/hw/xen/io/ring.h for the same reason.
Commit 3979fca4b6 "disas: Rename include/disas/bfd.h back to
include/disas/dis-asm.h" neglected to update the guard symbol for the
rename.
Commit a331c6d774 "semihosting: implement a semihosting console"
created include/hw/semihosting/console.h with an ill-advised guard
symbol.
Clean them up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Add a vhost-user gpu backend, based on virtio-gpu/3d device. It is
associated with a vhost-user-gpu device.
Various TODO and nice to have items:
- multi-head support
- crash & resume handling
- accelerated rendering/display that avoids the waiting round trips
- edid support
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new vhost-user message to give a unix socket to a vhost-user
backend for GPU display updates.
Back when I started that work, I added a new GPU channel because the
vhost-user protocol wasn't bidirectional. Since then, there is a
vhost-user-slave channel for the slave to send requests to the master.
We could extend it with GPU messages. However, the GPU protocol is
quite orthogonal to vhost-user, thus I chose to have a new dedicated
channel.
See vhost-user-gpu.rst for the protocol details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a vhost-user input backend example, based on virtio-input-host
device. It takes an evdev path as argument, and can be associated with
a vhost-user-input device via a UNIX socket:
$ vhost-user-input -p /dev/input/eventX -s /tmp/vui.sock
$ qemu ... -chardev socket,id=vuic,path=/tmp/vui.sock
-device vhost-user-input-pci,chardev=vuic
This example is intentionally not included in $TOOLS, and not
installed by default.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190514104126.6294-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stefan Hajnoczi
Raphael Norwitz
Philippe Mathieu-Daudé
Marc-André Lureau
Johannes Berg
Dr. David Alan Gilbert
Micky Yun Chan
Cole Robinson
Xie Yongji
Jan Kiszka
Alex Bennée
Wei Yang
Markus Armbruster
Peter Maydell