The vreport() function will print to HMP if available, otherwise
to stderr. In the event that vreport() is called during execution
of a QMP command, it will print to stderr, but mistakenly omit the
message prefixes (timestamp, guest name, program name).
This new usage of monitor_is_cur_qmp() from vreport() requires that
we add a stub to satisfy linking of non-system emulator binaries.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current unit tests rely on monitor.o not being linked, such
that the monitor stubs get linked instead. Since error_vprintf
is in monitor.o this allows a stub error_vprintf impl to be used
that calls g_test_message.
This takes a different approach, with error_vprintf moving
back to error-report.c such that it is always linked into the
tests. The monitor_vprintf() stub is then changed to use
g_test_message if QTEST_SILENT_ERRORS is set, otherwise it will
return -1 and trigger error_vprintf to call vfprintf.
The end result is functionally equivalent for the purposes of
the unit tests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only callers of these functions have been removed. Adding any
new usage of them is highly undesirable, so they should be entirely
removed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This change adds common kvm specific support to handle KVM VM file descriptor
change. KVM VM file descriptor can change as a part of confidential guest reset
mechanism. A new function api kvm_arch_on_vmfd_change() per
architecture platform is added in order to implement architecture specific
changes required to support it. A subsequent patch will add x86 specific
implementation for kvm_arch_on_vmfd_change() as currently only x86 supports
confidential guest reset.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/20260225035000.385950-6-anisinha@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new acpi_build_madt_standalone() function to fill the MADT
parameter field.
The IGVM parameter can be consumed by Coconut SVSM [1], instead of
relying on the fw_cfg interface, which has caused problems before due to
unexpected access [2,3]. Using IGVM parameters is the default way for
Coconut SVSM across hypervisors; switching over would allow removing
specialized code paths for QEMU in Coconut.
Coconut SVSM needs to know the SMP configuration, but does not look at
any other ACPI data, nor does it interact with the PCI bus settings.
Since the MADT is static and not linked with other ACPI tables, it can
be supplied stand-alone like this.
Generating the MADT twice (during ACPI table building and IGVM processing)
seems acceptable, since there is no infrastructure to obtain the MADT
out of the ACPI table memory area.
In any case OVMF, which runs after SVSM has already been initialized,
will continue reading all ACPI tables via fw_cfg and provide fixed up
ACPI data to the OS as before without any changes.
The IGVM parameter handler is implemented for the i386 machine target
and stubbed for all others.
[1] https://github.com/coconut-svsm/svsm/pull/858
[2] https://gitlab.com/qemu-project/qemu/-/issues/2882
[3] https://github.com/coconut-svsm/svsm/issues/646
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Message-ID: <20260130054714.715928-10-osteffen@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change meson script to only include the IGVM stubs file if the IGVM
feature is enabled. It is used to handle architecture specific
differences within the IGVM backend, not to provide stubs of the backend
itself.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Message-ID: <20260130054714.715928-9-osteffen@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit fccb744f41.
This commit introduced dependency of linux-user on qemu-sockets.c.
The latter includes handling of various socket types, while gdbstub
only needs unix sockets. Including different kinds of sockets
makes it more problematic to build linux-user statically.
The original issue - the need to unlink unix socket before binding -
will be addressed in the next change.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replaying even trivial s390x kernels hangs, because:
- cpu_post_load() fires the TOD timer immediately.
- s390_tod_load() schedules work for firing the TOD timer.
- If rr loop sees work and then timer, we get one timer expiration.
- If rr loop sees timer and then work, we get two timer expirations.
- Record and replay may diverge due to this race.
- In this particular case divergence makes replay loop spin: it sees that
TOD timer has expired, but cannot invoke its callback, because there
is no recorded CHECKPOINT_CLOCK_VIRTUAL.
- The order in which rr loop sees work and timer depends on whether
and when rr loop wakes up during load_snapshot().
- rr loop may wake up after the main thread kicks the CPU and drops
the BQL, which may happen if it calls, e.g., qemu_cond_wait_bql().
Firing TOD timer twice is duplicate work, but it was introduced
intentionally in commit 7c12f710ba ("s390x/tcg: rearm the CKC timer
during migration") in order to avoid dependency on migration order.
The key culprits here are timers that are armed ready expired. They
break the ordering between timers and CPU work, because they are not
constrained by instruction execution, thus introducing non-determinism
and record-replay divergence.
Fix by converting such timer callbacks to CPU work. Also add TOD clock
updates to the save path, mirroring the load path, in order to have the
same CHECKPOINT_CLOCK_VIRTUAL during recording and replaying.
Link: https://lore.kernel.org/qemu-devel/20251128133949.181828-1-thuth@redhat.com/
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20251201215514.1751994-1-iii@linux.ibm.com>
[thuth: Add SPDX license identifiers to the new stubs files]
Signed-off-by: Thomas Huth <thuth@redhat.com>
AioContexts are used as a generic event loop even outside the block
layer; move the header file out of block/ just like the implementation
is in util/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move RAMBlock functions out of ram_addr.h and cpu-common.h;
move memory API headers out of include/exec and into include/system.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AioContext has its own io_uring instance for file descriptor monitoring.
The disk I/O io_uring code was developed separately. Originally I
thought the characteristics of file descriptor monitoring and disk I/O
were too different, requiring separate io_uring instances.
Now it has become clear to me that it's feasible to share a single
io_uring instance for file descriptor monitoring and disk I/O. We're not
using io_uring's IOPOLL feature or anything else that would require a
separate instance.
Unify block/io_uring.c and util/fdmon-io_uring.c using the new
aio_add_sqe() API that allows user-defined io_uring sqe submission. Now
block/io_uring.c just needs to submit readv/writev/fsync and most of the
io_uring-specific logic is handled by fdmon-io_uring.c.
There are two immediate advantages:
1. Fewer system calls. There is no need to monitor the disk I/O io_uring
ring fd from the file descriptor monitoring io_uring instance. Disk
I/O completions are now picked up directly. Also, sqes are
accumulated in the sq ring until the end of the event loop iteration
and there are fewer io_uring_enter(2) syscalls.
2. Less code duplication.
Note that error_setg() messages are not supposed to end with
punctuation, so I removed a '.' for the non-io_uring build error
message.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20251104022933.618123-15-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
migrate_add_blocker_modes() and migration_add_notifier_modes use
variable arguments for a set of migration modes. The variable
arguments get collected into a bitset for processsing. Take a bitset
argument instead, it's simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20251027064503.1074255-3-armbru@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
QEMU has a per-thread "bql_locked" variable stored in TLS section, showing
whether the current thread is holding the BQL lock.
It's a pretty handy variable. Function-wise, QEMU have codes trying to
conditionally take bql, relying on the var reflecting the locking status
(e.g. BQL_LOCK_GUARD), or in a GDB debugging session, we could also look at
the variable (in reality, co_tls_bql_locked), to see which thread is
currently holding the bql.
When using that as a debugging facility, sometimes we can observe multiple
threads holding bql at the same time. It's because QEMU's condvar APIs
bypassed the bql_*() API, hence they do not update bql_locked even if they
have released the mutex while waiting.
It can cause confusion if one does "thread apply all p co_tls_bql_locked"
and see multiple threads reporting true.
Fix this by moving the bql status updates into the mutex debug hooks. Now
the variable should always reflect the reality.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250904223158.1276992-1-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add IgvmNativeVpContextX64 struct holding the register state (see igvm
spec), and the qigvm_x86_load_context() function to load the register
state.
Wire up using two new functions: qigvm_x86_set_vp_context() is called
from igvm file handling code and stores the boot processor context.
qigvm_x86_bsp_reset() is called from i386 target cpu reset code and
loads the context into the cpu registers.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20251029105555.2492276-5-kraxel@redhat.com>
Add and wire up qigvm_x86_get_mem_map_entry function which converts the
e820 table into an igvm memory map parameter. This makes igvm files for
the native (non-confidential) platform with memory map parameter work.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20251029105555.2492276-4-kraxel@redhat.com>
When we unrealize a CPU object (which happens on vCPU hot-unplug), we
should destroy all the AddressSpace objects we created via calls to
cpu_address_space_init() when the CPU was realized.
Commit 24bec42f3d added a function to do this for a specific
AddressSpace, but did not add any places where the function was
called.
Since we always want to destroy all the AddressSpaces on unrealize,
regardless of the target architecture, we don't need to try to keep
track of how many are still undestroyed, or make the target
architecture code manually call a destroy function for each AS it
created. Instead we can adjust the function to always completely
destroy the whole cpu->ases array, and arrange for it to be called
during CPU unrealize as part of the common code.
Without this fix, AddressSanitizer will report a leak like this
from a run where we hot-plugged and then hot-unplugged an x86 KVM
vCPU:
Direct leak of 416 byte(s) in 1 object(s) allocated from:
#0 0x5b638565053d in calloc (/data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/qemu-system-x86_64+0x1ee153d) (BuildId: c1cd6022b195142106e1bffeca23498c2b752bca)
#1 0x7c28083f77b1 in g_malloc0 (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x637b1) (BuildId: 1eb6131419edb83b2178b682829a6913cf682d75)
#2 0x5b6386999c7c in cpu_address_space_init /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../system/physmem.c:797:25
#3 0x5b638727f049 in kvm_cpu_realizefn /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../target/i386/kvm/kvm-cpu.c:102:5
#4 0x5b6385745f40 in accel_cpu_common_realize /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../accel/accel-common.c:101:13
#5 0x5b638568fe3c in cpu_exec_realizefn /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../hw/core/cpu-common.c:232:10
#6 0x5b63874a2cd5 in x86_cpu_realizefn /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../target/i386/cpu.c:9321:5
#7 0x5b6387a0469a in device_set_realized /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../hw/core/qdev.c:494:13
#8 0x5b6387a27d9e in property_set_bool /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../qom/object.c:2375:5
#9 0x5b6387a2090b in object_property_set /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../qom/object.c:1450:5
#10 0x5b6387a35b05 in object_property_set_qobject /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../qom/qom-qobject.c:28:10
#11 0x5b6387a21739 in object_property_set_bool /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../qom/object.c:1520:15
#12 0x5b63879fe510 in qdev_realize /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../hw/core/qdev.c:276:12
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2517
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250929144228.1994037-4-peter.maydell@linaro.org
Signed-off-by: Peter Xu <peterx@redhat.com>
This removes the TARGET_S390X and CONFIG_KVM conditions from the
CPU commands that are conceptually specific to s390x. Top level
stubs are provided to cope with non-s390x targets, or builds
without KVM.
The removal of CONFIG_KVM is justified by the fact there is no
conceptual difference between running 'qemu-system-s390x -accel tcg'
on a build with and without KVM built-in, so apps only using TCG
can't rely on the CONFIG_KVM in the schema.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-11-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_* conditions from all the CPU commands
that are conceptually target independent. Top level stubs are
provided to cope with targets which do not currently implement
all of the commands. Adjust the doc comments accordingly.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-10-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the Xen event channel
commands, moving them to the recently introduced misc-i386.json
QAPI file, given they are inherantly i386 specific commands.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-7-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the SGX confidential
virtualization commands, moving them to the recently introduced
misc-i386.json QAPI file, given they are inherantly i386 specific
commands.
Observe a pre-existing bug that the "SGXEPCSection" struct lacked
a TARGET_I386 condition, despite its only usage being behind a
TARGET_I386 condition.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-6-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_ARM condition from the query-gic-capability
command. This requires providing a QMP command stub for non-ARM targets.
This in turn requires moving the command out of misc-target.json, since
that will trigger symbol poisoning errors when built from target
independent code.
Following the earlier precedent, this creates a misc-arm.json file to
hold this ARM specific command.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-5-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the SEV confidential
virtualization commands, moving them to the recently introduced
misc-i386.json QAPI file, given they are inherantly i386 specific
commands.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-4-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the rtc-reset-reinjection
command. This requires providing a QMP command stub for non-i386 target.
This in turn requires moving the command out of misc-target.json, since
that will trigger symbol poisoning errors when built from target
independent code.
Rather than putting the command into misc.json, it is proposed to create
misc-$TARGET.json files to hold commands whose impl is conceptually
only applicable to a single target. This gives an obvious docs hint to
consumers that the command is only useful in relation a specific target,
while misc.json is for commands applicable to 2 or more targets.
The current impl of qmp_rtc_reset_reinject() is a no-op if the i386
RTC is disabled in Kconfig, or if the running machine type lack any
RTC device.
The stub impl for non-i386 targets retains this no-op behaviour.
However, it is now reporting an Error mentioning this command is not
available for current target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-2-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Split icount stuff from system/cpu-timers.h.
There are 17 files which only require icount.h, 7 that only
require cpu-timers.h, and 7 that require both.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both monitor-fd.c and monitor-internal.c contain a stub for
monitor_get_fd(), which causes a duplicate symbol linker error when
linking rust-qemu-api-integration. Use monitor-internal.c instead of
monitor-fd.c and remove the latter.
Reported-by: Zhao Liu <zhao1.liu@intel.com>
Suggested-by: Zhao Liu <zhao1.liu@intel.com>
Fixes: fccb744f41 ("gdbstub: Try unlinking the unix socket before binding")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250217104900.230122-1-iii@linux.ibm.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory.
include/qapi/qmp/dispatch.h corresponds mostly to qapi/qmp-registry.c.
Move and rename it to include/qapi/qmp-registry.h.
Now just qerror.h is left in include/qapi/qmp/. Since it's deprecated
& (slowly) getting eliminated anyway, it isn't worth moving.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-3-armbru@redhat.com>
In case an emulated process execve()s another emulated process, bind()
will fail, because the socket already exists. So try deleting it. Use
the existing unix_listen() function which does this. Link qemu-user
with qemu-sockets.c and add the monitor_get_fd() stub.
Note that it is not possible to handle this in do_execv(): deleting
gdbserver_user_state.socket_path before safe_execve() is not correct,
because the latter may fail, and afterwards we may lose control.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250117001542.8290-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-12-alex.bennee@linaro.org>
Add the cpr-transfer migration mode, which allows the user to transfer
a guest to a new QEMU instance on the same host with minimal guest pause
time, by preserving guest RAM in place, albeit with new virtual addresses
in new QEMU, and by preserving device file descriptors. Pages that were
locked in memory for DMA in old QEMU remain locked in new QEMU, because the
descriptor of the device that locked them remains open.
cpr-transfer preserves memory and devices descriptors by sending them to
new QEMU over a unix domain socket using SCM_RIGHTS. Such CPR state cannot
be sent over the normal migration channel, because devices and backends
are created prior to reading the channel, so this mode sends CPR state
over a second "cpr" migration channel. New QEMU reads the cpr channel
prior to creating devices or backends. The user specifies the cpr channel
in the channel arguments on the outgoing side, and in a second -incoming
command-line parameter on the incoming side.
The user must start old QEMU with the the '-machine aux-ram-share=on' option,
which allows anonymous memory to be transferred in place to the new process
by transferring a memory descriptor for each ram block. Memory-backend
objects must have the share=on attribute, but memory-backend-epc is not
supported.
The user starts new QEMU on the same host as old QEMU, with command-line
arguments to create the same machine, plus the -incoming option for the
main migration channel, like normal live migration. In addition, the user
adds a second -incoming option with channel type "cpr". This CPR channel
must support file descriptor transfer with SCM_RIGHTS, i.e. it must be a
UNIX domain socket.
To initiate CPR, the user issues a migrate command to old QEMU, adding
a second migration channel of type "cpr" in the channels argument.
Old QEMU stops the VM, saves state to the migration channels, and enters
the postmigrate state. New QEMU mmap's memory descriptors, and execution
resumes.
The implementation splits qmp_migrate into start and finish functions.
Start sends CPR state to new QEMU, which responds by closing the CPR
channel. Old QEMU detects the HUP then calls finish, which connects the
main migration channel.
In summary, the usage is:
qemu-system-$arch -machine aux-ram-share=on ...
start new QEMU with "-incoming <main-uri> -incoming <cpr-channel>"
Issue commands to old QEMU:
migrate_set_parameter mode cpr-transfer
{"execute": "migrate", ...
{"channel-type": "main"...}, {"channel-type": "cpr"...} ... }
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/1736967650-129648-17-git-send-email-steven.sistare@oracle.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Configuring "--enable-user --disable-system --enable-tools" causes the
build failure with the following information:
/usr/bin/ld: libhwcore.a.p/hw_core_qdev.c.o: in function `device_finalize':
/qemu/build/../hw/core/qdev.c:688: undefined reference to `qapi_event_send_device_deleted'
collect2: error: ld returned 1 exit status
To fix the above issue, add qdev.c stub when build with `have_tools`.
With this fix, QEMU could be successfully built in the following cases:
--enable-user --disable-system --enable-tools
--enable-user --disable-system --disable-tools
--enable-user --disable-system
Cc: qemu-stable@nongnu.org
Fixes: 388b849fb6 ("stubs: avoid duplicate symbols in libqemuutil.a")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2766
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250121154318.214680-1-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Right now, the stub BQL in stubs/iothread-lock.c always reports itself as
unlocked. However, Rust would like to run its tests in an environment where
the BQL *is* locked. Provide an extremely dirty function that flips the
return value of bql_is_locked() to true.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Big QEMU Lock (BQL) is used to provide interior mutability to Rust
code. While BqlCell performs indivisible accesses, an equivalent of
RefCell will allow the borrower to hold to the interior content for a
long time. If the BQL is dropped, another thread could come and mutate
the data from C code (Rust code would panic on borrow_mut() instead).
In order to prevent this, add a new BQL primitive that can mark
BQL-atomic sections and aborts if the BQL is dropped within them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qapi_event_send_device_deleted is always included (together with the
rest of QAPI) in libqemuutil.a if either system-mode emulation or tools
are being built, and in that case the stub causes a duplicate symbol
to appear in libqemuutil.a.
Add the symbol only if events are not being requested.
Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The non-standard .fa library suffix breaks the link source
de-duplication done by Meson so drop it.
The lack of link source de-duplication causes AddressSanitizer to
complain ODR violations, and makes GNU ld abort when combined with
clang's LTO.
Fortunately, the non-standard suffix is not necessary anymore for
two reasons.
First, the non-standard suffix was necessary for fork-fuzzing.
Meson wraps all standard-suffixed libraries with --start-group and
--end-group. This made a fork-fuzz.ld linker script wrapped as well and
broke builds. Commit d2e6f9272d ("fuzz: remove fork-fuzzing
scaffolding") dropped fork-fuzzing so we can now restore the standard
suffix.
Second, the libraries are not even built anymore, because it is
possible to just use the object files directly via extract_all_objects().
The occurences of the suffix were detected and removed by performing
a tree-wide search with 'fa' and .fa (note the quotes and dot).
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-xkb-v4-4-2de564e5c859@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are about to remove direct calls to individual accelerators for
this information and will need a central point for plugins to hook
into time changes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240530220610.1245424-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-5-alex.bennee@linaro.org>
I'm keeping the EACCES because callers expect to be able to look at
errno.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Those functions are not needed, one remove function should already
work. Clean it up.
Here the code doesn't really care about whether we need to keep that dupfd
around if close() failed: when that happens something got very wrong,
keeping the dup_fd around the fdsets may not help that situation so far.
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[add missing return statement, removal during traversal is not safe]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Compiling without system, user, tools or guest-agent fails with the
following error message:
./configure --disable-system --disable-user --disable-tools \
--disable-guest-agent
error message:
/usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function `error_printf':
/media/liuzhao/data/qemu-cook/build/../util/error-report.c:38: undefined reference to `error_vprintf'
/usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function `vreport':
/media/liuzhao/data/qemu-cook/build/../util/error-report.c:215: undefined reference to `error_vprintf'
collect2: error: ld returned 1 exit status
This is because tests/bench and tests/unit both need qemuutil, which
requires error_vprintf stub when system is disabled.
Add error_vprintf stub into stub_ss for all cases other than disabling
system.
Fixes: 3a15604900 ("stubs: include stubs only if needed")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240605152549.1795762-1-zhao1.liu@intel.com>
[Include error-printf.c unconditionally. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MonitorDef is defined by hmp-target.h, and all users except one already
include it; the reason why the stubs do not include it, is because
hmp-target.h currently can only be used in files that are compiled
per target. However, that is easily fixed. Because the benefit of
having MonitorDef in typedefs.h is very small, do it and remove the
type from typedefs.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compilation QGA without system and user fails
./configure --disable-system --disable-user --enable-guest-agent
Link failure:
/usr/bin/ld: libqemuutil.a.p/util_main-loop.c.o: in function
`os_host_main_loop_wait':
../util/main-loop.c:303: undefined reference to `replay_mutex_unlock'
/usr/bin/ld: ../util/main-loop.c:307: undefined reference to
`replay_mutex_lock'
/usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function
`error_printf':
../util/error-report.c:38: undefined reference to `error_vprintf'
/usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function
`vreport':
../util/error-report.c:225: undefined reference to `error_vprintf'
/usr/bin/ld: libqemuutil.a.p/util_qemu-timer.c.o: in function
`timerlist_run_timers':
../util/qemu-timer.c:562: undefined reference to `replay_checkpoint'
/usr/bin/ld: ../util/qemu-timer.c:530: undefined reference to
`replay_checkpoint'
/usr/bin/ld: ../util/qemu-timer.c:525: undefined reference to
`replay_checkpoint'
ninja: build stopped: subcommand failed.
Fixes: 3a15604900 ("stubs: include stubs only if needed")
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20240426121347.18843-2-kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Even though monitor_get_fd() has to remain separate because it is mocked by
tests/unit/test-util-sockets, monitor_fdsets_cleanup() is logically part
of the stubs for monitor/fds.c, so move it there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-19-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently it is not documented anywhere why some functions need to
be stubbed.
Group the files in stubs/meson.build according to who needs them, both
to reduce the size of the compilation and to clarify the use of stubs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
replay.c symbols are only needed by user mode emulation, with the
exception of replay_mode that is needed by both user mode emulation
(by way of qemu_guest_getrandom) and block layer tools (by way of
util/qemu-timer.c).
Since it is needed by libqemuutil rather than specific files that
are part of the tools and emulators, split the replay_mode stub
into its own file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the colo stubs are needed exactly when the build options are not
enabled, move them together with the code they stub.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the memory-device stubs are needed exactly when the Kconfig symbols are not
needed, move them to hw/mem/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-15-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the ramfb stubs are needed exactly when the Kconfig symbols are not
needed, move them to hw/display/ and compile them when ramfb.c is absent.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the semihosting stubs are needed exactly when the Kconfig symbols
are not needed, move them to semihosting/ and conditionalize them
on CONFIG_SEMIHOSTING and/or CONFIG_SYSTEM_ONLY.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the virtio memory device stubs are needed exactly when the
Kconfig symbol is not enabled, they can be placed in hw/virtio/ and
conditionalized on CONFIG_VIRTIO_MD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel P. Berrangé
Ani Sinha
Oliver Steffen
Michael Tokarev
Ilya Leoshkevich
Paolo Bonzini
Stefan Hajnoczi
Markus Armbruster
Peter Xu
Gerd Hoffmann
Peter Maydell
Richard Henderson
Steve Sistare
Zhao Liu
Philippe Mathieu-Daudé
Alex Bennée
Fabiano Rosas
Konstantin Kostiuk