Make the synchronous calls evident by not hiding the call to
migration_channel_connect_outgoing() in the transport code. Have those
functions return and call the function at the upper level.
This helps with navigation: the transport code returns the ioc,
there's no need to look into them when browsing the code.
It also allows RDMA in the source side to use the same path as the
rest of the transports.
While here, document the async calls which are the exception.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/qemu-devel/20260123141656.6765-26-farosas@suse.de
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move the code responsible for the various channels connection into
channel.c. This is all executed before the migration_thread and
process_incoming_migration_co are running, so it helps the reasoning
to have them out of migration.c.
migration_ioc_process_incoming becomes migration_channel_identify
which is more in line with what the function does.
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260123141656.6765-19-farosas@suse.de
Signed-off-by: Fabiano Rosas <farosas@suse.de>
To make it easier to follow the code, rename the functions that start
the migration thread and migration coroutine to contain the word
"start".
This will give new contributors the chance of seeing the word start
and reaching the actual migration code, instead of twists and turns of
qio_channel_add_watch and qio_task_run_in_thread.
Remove all other instances of "start" and use wording more suitable to
what the current migration stage is. The transport code such as
fd_start_migration_outgoing becomes fd_connect_outgoing, the early
setup code such as qemu_start_incoming_migration becomes
qemu_setup_incoming_migration and so on.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/qemu-devel/20260123141656.6765-18-farosas@suse.de
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Use the common connection paths for the incoming and outgoing sides of
rdma migration. This removes one usage of QEMUFile from rdma.c. It
also allows further unification of the connection code in next
patches.
Move the channels enum to channel.h so rdma.c can access it. The RDMA
channel is considered a CH_MAIN channel.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/qemu-devel/20260123141656.6765-15-farosas@suse.de
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Simplify migration_channel_connect() and migration_connect() to not
take an error as input. Move the error handling into the paths that
generate the error.
To achieve this, call migration_connect_error_propagate() from
socket.c and tls.c, which are the async paths.
For the sync paths, the handling is done as normal by returning all
the way to qmp_migrate_finish(), except that now the sync paths don't
pass the error forward into migration_connect() anymore.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/qemu-devel/20260123141656.6765-13-farosas@suse.de
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The Stat64 structure is an aid for 32-bit hosts, and
is no longer required. Use plain 64-bit types.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A few error messages show numeric errno codes. Use error_setg_errno()
to show human-readable text instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20251121121438.1249498-13-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Trivial fixup to riscv_kvm_cpu_finalize_features()]
Commit 44ce1b5d2f ("migration/rdma: define htonll/ntohll
only if not predefined") tried to only include htonll/ntohll
replacements when their symbol is *defined*, but this doesn't
work, as they aren't:
../migration/rdma.c:242:17: error: static declaration of 'htonll' follows non-static declaration
242 | static uint64_t htonll(uint64_t v)
| ^~~~~~
In file included from /usr/include/netinet/in.h:73,
from /usr/include/sys/socket.h:32,
from /home/f4bug/qemu/include/system/os-posix.h:30,
from /home/f4bug/qemu/include/qemu/osdep.h:176,
from ../migration/rdma.c:17:
/usr/include/sys/byteorder.h:75:18: note: previous declaration of 'htonll' with type 'uint64_t(uint64_t)' {aka 'long unsigned int(long unsigned int)'}
75 | extern uint64_t htonll(uint64_t);
| ^~~~~~
../migration/rdma.c:252:17: error: static declaration of 'ntohll' follows non-static declaration
252 | static uint64_t ntohll(uint64_t v)
| ^~~~~~
/usr/include/sys/byteorder.h:76:18: note: previous declaration of 'ntohll' with type 'uint64_t(uint64_t)' {aka 'long unsigned int(long unsigned int)'}
76 | extern uint64_t ntohll(uint64_t);
| ^~~~~~
Better to check the symbol availability with meson.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251117203834.83713-3-philmd@linaro.org>
I hit following error which testing migration in pure RoCE env:
"-incoming rdma:[::]:8089: RDMA ERROR: You only have RoCE / iWARP devices in your
systems and your management software has specified '[::]', but IPv6 over RoCE /
iWARP is not supported in Linux.#012'."
In our setup, we use rdma bind on ipv6 on target host, while connect from source
with ipv4, remove the qemu_rdma_broken_ipv6_kernel, migration just work
fine.
Checking the git history, the function was added since introducing of
rdma migration, which is more than 10 years ago. linux-rdma has
improved support on RoCE/iWARP for ipv6 over past years. There are a few fixes
back in 2016 seems related to the issue, eg:
aeb76df46d11 ("IB/core: Set routable RoCE gid type for ipv4/ipv6 networks")
other fixes back in 2018, eg:
052eac6eeb56 RDMA/cma: Update RoCE multicast routines to use net namespace
8d20a1f0ecd5 RDMA/cma: Fix rdma_cm raw IB path setting for RoCE
9327c7afdce3 RDMA/cma: Provide a function to set RoCE path record L2 parameters
5c181bda77f4 RDMA/cma: Set default GID type as RoCE when resolving RoCE route
3c7f67d1880d IB/cma: Fix default RoCE type setting
be1d325a3358 IB/core: Set RoCEv2 MGID according to spec
63a5f483af0e IB/cma: Set default gid type to RoCEv2
So remove the outdated function and it's usage.
Cc: Peter Xu <peterx@redhat.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Yu Zhang <yu.zhang@ionos.com>
Cc: Fabiano Rosas <farosas@suse.de>
Cc: qemu-devel@nongnu.org
Cc: linux-rdma@vger.kernel.org
Cc: michael@flatgalaxy.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Tested-by: Li zhijian <lizhijian@fujitsu.com>
Reviewed-by: Michael Galaxy <mrgalaxy@nvidia.com>
Link: https://lore.kernel.org/r/20250402051306.6509-1-jinpu.wang@ionos.com
[peterx: some cosmetic changes]
Signed-off-by: Peter Xu <peterx@redhat.com>
control_save_page() is for RDMA only, unfold it to make the code more
clear.
In addition:
- Similar to other branches style in ram_save_target_page(), involve RDMA
only if the condition 'migrate_rdma()' is true.
- Further simplify the code by removing the RAM_SAVE_CONTROL_NOT_SUPP.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Message-ID: <20250305062825.772629-6-lizhijian@fujitsu.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Since we have disabled RDMA + postcopy, it's safe to remove
the migration_in_postcopy() that follows the migrate_rdma().
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Message-ID: <20250305062825.772629-5-lizhijian@fujitsu.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove all instances of _fd_ from the migration generic code. These
functions have grown over time and the _fd_ part is now just
confusing.
migration_fd_error() -> migration_error() makes it a little
vague. Since it's only used for migration_connect() failures, change
it to migration_connect_set_error().
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20250213175927.19642-4-farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In commit 3fa9642ff7 change was made to convert the RDMA backend to
accept MigrateAddress struct. However, the assignment of "host" leads
to data corruption on the target host and the failure of migration.
isock->host = rdma->host;
By allocating the memory explicitly for it with g_strdup_printf(), the
issue is fixed and the migration doesn't fail any more.
Fixes: 3fa9642ff7 ("migration: convert rdma backend to accept MigrateAddress")
Cc: qemu-stable <qemu-stable@nongnu.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/CAHEcVy4L_D6tuhJ8h=xLR4WaPaprJE3nnxZAEyUnoTrxQ6CF5w@mail.gmail.com
Signed-off-by: Yu Zhang <yu.zhang@ionos.com>
[peterx: use g_strdup() instead of g_strdup_printf(), per Zhijian]
Signed-off-by: Peter Xu <peterx@redhat.com>
Solaris has #defines for htonll and ntohll which cause syntax errors
when compiling code that attempts to (re)define these functions..
Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com>
Link: https://lore.kernel.org/r/65a04a7d.497ab3.3e7bef1f@gateway.sonic.net
Signed-off-by: Peter Xu <peterx@redhat.com>
RDMA based transport backend for 'migrate'/'migrate-incoming' QAPIs
accept new wire protocol of MigrateAddress struct.
It is achived by parsing 'uri' string and storing migration parameters
required for RDMA connection into well defined InetSocketAddress struct.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-7-farosas@suse.de>
This let us simplify code of this shape.
qemu_fflush(f);
int ret = qemu_file_get_error(f);
if (ret) {
return ret;
}
into:
int ret = qemu_fflush(f);
if (ret) {
return ret;
}
I updated all callers where there is any error check.
qemu_fclose() don't need to check for f->last_error because
qemu_fflush() returns it at the beggining of the function.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-13-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now that we know it only handles zero, we can remove the ch parameter.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231019085259.13307-3-quintela@redhat.com>
We don't allow non zero compressed pages since:
commit 3edcd7e6eb
Author: Peter Lieven <pl@kamp.de>
Date: Tue Mar 26 10:58:35 2013 +0100
migration: search for zero instead of dup pages
RDMA case is a bit more complicated, but they don't handle it since:
commit a1febc4950
Author: Richard Henderson <rth@twiddle.net>
Date: Mon Aug 29 11:46:14 2016 -0700
cutils: Export only buffer_is_zero
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231019085259.13307-2-quintela@redhat.com>
Change code that is:
int ret;
...
ret = foo();
if (ret[ < 0]?) {
to:
if (foo()[ < 0]) {
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-14-quintela@redhat.com>
Declare all variables that are only used inside a for loop inside the
for statement.
This makes clear that they are not used outside of the for loop.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-13-quintela@redhat.com>
Once there, all the uses are local to the for, so declare the variable
inside the for statement.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-12-quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-11-quintela@redhat.com>
Functions are long enough even without this.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-10-quintela@redhat.com>
The only user was rdma, and its use is gone.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-8-quintela@redhat.com>
The only user of ram_control_save_page() and save_page() hook was
rdma. Just move the function to rdma.c, rename it to
rdma_control_save_page().
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-7-quintela@redhat.com>
There is only one flag called with: RAM_CONTROL_BLOCK_REG.
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-6-quintela@redhat.com>
Instead of going through ram_control_load_hook(), call
qemu_rdma_registration_handle() directly.
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-5-quintela@redhat.com>
Once there:
- Remove unused data parameter
- unfold it in its callers
- change all callers to call qemu_rdma_registration_stop()
- We need to call QIO_CHANNEL_RDMA() after we check for migrate_rdma()
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-4-quintela@redhat.com>
Once there:
- Remove unused data parameter
- unfold it in its callers.
- change all callers to call qemu_rdma_registration_start()
- We need to call QIO_CHANNEL_RDMA() after we check for migrate_rdma()
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-3-quintela@redhat.com>
Helper to say if we are doing a migration over rdma.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-2-quintela@redhat.com>
qemu_rdma_dump_id() dumps RDMA device details to stdout.
rdma_start_outgoing_migration() calls it via qemu_rdma_source_init()
and qemu_rdma_resolve_host() to show source device details.
rdma_start_incoming_migration() arranges its call via
rdma_accept_incoming_migration() and qemu_rdma_accept() to show
destination device details.
Two issues:
1. rdma_start_outgoing_migration() can run in HMP context. The
information should arguably go the monitor, not stdout.
2. ibv_query_port() failure is reported as error. Its callers remain
unaware of this failure (qemu_rdma_dump_id() can't fail), so
reporting this to the user as an error is problematic.
Fixable, but the device detail dump is noise, except when
troubleshooting. Tracing is a better fit. Similar function
qemu_rdma_dump_id() was converted to tracing in commit
733252deb8 (Tracify migration/rdma.c).
Convert qemu_rdma_dump_id(), too.
While there, touch up qemu_rdma_dump_gid()'s outdated comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-54-armbru@redhat.com>
error_report() obeys -msg, reports the current error location if any,
and reports to the current monitor if any. Reporting to stderr
directly with fprintf() or perror() is wrong, because it loses all
this.
Fix the offenders. Bonus: resolves a FIXME about problematic use of
errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-53-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init(), qemu_rdma_connect(),
rdma_start_incoming_migration(), and rdma_start_outgoing_migration()
violate this principle: they call error_report() via
qemu_rdma_cleanup().
Moreover, qemu_rdma_cleanup() can't fail. It is called on error
paths, and QIOChannel close and finalization. Are the conditions it
reports really errors? I doubt it.
Downgrade qemu_rdma_cleanup()'s errors to warnings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-52-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_write_one() violates this principle: it reports errors to
stderr via qemu_rdma_register_and_get_keys(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up: silence qemu_rdma_register_and_get_keys(). I believe
the caller's error reports suffice. If they don't, we need to convert
to Error instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-51-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_post_send_control(), qemu_rdma_exchange_get_response(), and
qemu_rdma_write_one() violate this principle: they call
error_report(), fprintf(stderr, ...), and perror() via
qemu_rdma_block_for_wrid(), qemu_rdma_poll(), and
qemu_rdma_wait_comp_channel(). I elected not to investigate how
callers handle the error, i.e. precise impact is not known.
Clean this up by dropping the error reporting from qemu_rdma_poll(),
qemu_rdma_wait_comp_channel(), and qemu_rdma_block_for_wrid(). I
believe the callers' error reports suffice. If they don't, we need to
convert to Error instead.
Bonus: resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-50-armbru@redhat.com>
When qemu_rdma_wait_comp_channel() receives an event from the
completion channel, it reports an error "receive cm event while wait
comp channel,cm event is T", where T is the numeric event type.
However, the function fails only when T is a disconnect or device
removal. Events other than these two are not actually an error, and
reporting them as an error is wrong. If we need to report them to the
user, we should use something else, and what to use depends on why we
need to report them to the user.
For now, report this error only when the function actually fails.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-49-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init() and qemu_rdma_accept() violate this principle:
they call error_report() via qemu_rdma_reg_control(). I elected not
to investigate how callers handle the error, i.e. precise impact is
not known.
Clean this up by dropping the error reporting from
qemu_rdma_reg_control(). I believe the callers' error reports
suffice. If they don't, we need to convert to Error instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-48-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_connect() violates this principle: it calls error_report()
and perror(). I elected not to investigate how callers handle the
error, i.e. precise impact is not known.
Clean this up: replace perror() by changing error_setg() to
error_setg_errno(), and drop error_report(). I believe the callers'
error reports suffice then. If they don't, we need to convert to
Error instead.
Bonus: resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-47-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_resolve_host() violates this principle: it calls
error_report().
Clean this up: drop error_report().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-46-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init() violates this principle: it calls
error_report() via qemu_rdma_alloc_pd_cq(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_alloc_pd_cq() to Error.
The conversion loses a piece of advice on one of two failure paths:
Your mlock() limits may be too low. Please check $ ulimit -a # and search for 'ulimit -l' in the output
Not worth retaining.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-45-armbru@redhat.com>
Just for symmetry with qemu_rdma_post_send_control(). Error messages
lose detail I consider of no use to users.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-44-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_exchange_send() violates this principle: it calls
error_report() via qemu_rdma_post_send_control(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_post_send_control() to Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-43-armbru@redhat.com>
Just for consistency with qemu_rdma_write_one() and
qemu_rdma_write_flush(), and for slightly simpler code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-42-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_write_flush() violates this principle: it calls
error_report() via qemu_rdma_write_one(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_write_one() to Error. Bonus:
resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-41-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qio_channel_rdma_writev() violates this principle: it calls
error_report() via qemu_rdma_write_flush(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_write_flush() to Error.
Necessitates setting an error when qemu_rdma_write_one() failed.
Since this error will go away later in this series, simply use "FIXME
temporary error message" there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-40-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_exchange_send() violates this principle: it calls
error_report() via callback qemu_rdma_reg_whole_ram_blocks(). I
elected not to investigate how callers handle the error, i.e. precise
impact is not known.
Clean this up by converting the callback to Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-39-armbru@redhat.com>
Fabiano Rosas
Richard Henderson
Markus Armbruster
Philippe Mathieu-Daudé
Jack Wang
Li Zhijian
Yu Zhang
Nick Briggs
Avihai Horon
Michael Tokarev
Het Gala
Juan Quintela