The eth_header is not actually guaranteed to be aligned. We attempt
to deal with this in some places such as net_checksum_calculate() by
using lduw_be_p() and so on to access the fields, but this is not
sufficient to be correct, because even accessing a byte member within
a misaligned struct is undefined behaviour. The clang sanitizer will
emit an error like this if you run the sifive_u_mmc functional test
with sanitizers enabled:
../../net/checksum.c:144:24: runtime error: member access within misaligned address 0x619a74c32033 for type 'tcp_header' (aka 'struct tcp_header'), which requires 4 byte alignment
0x619a74c32033: note: pointer points here
0a 00 02 02 86 aa 00 16 52 c1 d3 70 00 00 00 00 a0 02 fa f0 00 00 00 00 02 04 05 b4 04 02 08 0a
^
#0 0x619a6ba84794 in net_checksum_calculate /home/pm215/qemu/build/clang/../../net/checksum.c:144:24
#1 0x619a6b5940da in gem_transmit /home/pm215/qemu/build/clang/../../hw/net/cadence_gem.c:1386:21
#2 0x619a6b592141 in gem_write /home/pm215/qemu/build/clang/../../hw/net/cadence_gem.c:1650:13
Fix this by marking the tcp_header struct as QEMU_PACKED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Message-ID: <20260212140917.1443253-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The eth_header is not actually guaranteed to be aligned. We attempt
to deal with this in some places such as net_checksum_calculate() by
using lduw_be_p() and so on to access the fields, but this is not
sufficient to be correct, because even accessing a byte member within
a misaligned struct is undefined behaviour. The clang sanitizer will
emit an error like this if you run the sifive_u_mmc functional test
with sanitizers enabled:
../../net/checksum.c:168:24: runtime error: member access within misaligned address 0x5b7a7f829033 for type 'udp_header' (aka 'struct udp_header'), which requires 2 byte alignment
0x5b7a7f829033: note: pointer points here
ff ff ff ff 00 44 00 43 01 34 58 54 01 01 06 00 85 95 80 60 00 00 00 00 00 00 00 00 00 00 00 00
^
#0 0x5b7a71a5887e in net_checksum_calculate /home/pm215/qemu/build/clang/../../net/checksum.c:168:24
#1 0x5b7a7156819a in gem_transmit /home/pm215/qemu/build/clang/../../hw/net/cadence_gem.c:1386:21
#2 0x5b7a71566201 in gem_write /home/pm215/qemu/build/clang/../../hw/net/cadence_gem.c:1650:13
Fix this by marking the udp_header struct as QEMU_PACKED,
so that the compiler knows it might be unaligned and will
generate the right code for accessing fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Message-ID: <20260212140917.1443253-5-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The eth_header is not actually guaranteed to be aligned. We attempt
to deal with this in some places such as net_checksum_calculate() by
using lduw_be_p() and so on to access the fields, but this is not
sufficient to be correct, because even accessing a byte member within
a misaligned struct is undefined behaviour. The clang sanitizer will
emit an error like this if you run the sifive_u_mmc functional test
with sanitizers enabled:
../../net/checksum.c:78:47: runtime error: member access within misaligned address 0x561f52f35011 for type 'struct eth_header', which requires 2 byte alignment
0x561f52f35011: note: pointer points here
00 00 00 00 33 33 00 00 00 16 52 54 00 12 34 56 86 dd 60 00 00 00 00 24 00 01 00 00 00 00 00 00
^
#0 0x561f20608459 in net_checksum_calculate /home/pm215/qemu/build/clang/../../net/checksum.c:78:47
#1 0x561f20117bfa in gem_transmit /home/pm215/qemu/build/clang/../../hw/net/cadence_gem.c:1386:21
#2 0x561f20115c61 in gem_write /home/pm215/qemu/build/clang/../../hw/net/cadence_gem.c:1650:13
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../../net/checksum.c:78:47
Fix this by marking the eth_header struct as QEMU_PACKED, so that the
compiler knows it might be unaligned and will generate the right code
for accessing fields.
This is similar to commit f8b94b4c52 ("net: mark struct ip_header as
QEMU_PACKED") where we fixed this for a different struct defined in
this file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Message-ID: <20260212140917.1443253-4-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When OBJECT_DECLARE_SIMPLE_TYPE is used, it automatically provides
the typedef, so we don’t have to define it ourselves.
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251023063429.1400398-1-phind.uet@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When any host or guest GSO over UDP tunnel offload is enabled the
virtio net header includes the additional tunnel-related fields,
update the size accordingly.
Push the GSO over UDP tunnel offloads all the way down to the tap
device extending the newly introduced NetFeatures struct, and
eventually enable the associated features.
As per virtio specification, to convert features bit to offload bit,
map the extended features into the reserved range.
Finally, make the vhost backend aware of the exact header layout, to
copy it correctly. The tunnel-related field are present if either
the guest or the host negotiated any UDP tunnel related feature:
add them to the kernel supported features list, to allow qemu
transfer to the backend the needed information.
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <093b4bc68368046bffbcab2202227632d6e4e83b.1758549625.git.pabeni@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tap devices support GSO over UDP tunnel offload. Probe for such
feature in a similar manner to other offloads.
GSO over UDP tunnel needs to be enabled in addition to a "plain"
offload (TSO or USO).
No need to check separately for the outer header checksum offload:
the kernel is going to support both of them or none.
The new features are disabled by default to avoid compat issues,
and could be enabled, after that hw_compat_10_1 will be added,
together with the related compat entries.
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <a987a8a7613cbf33bb2209c7c7f5889b512638a7.1758549625.git.pabeni@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide extended version of the features manipulation helpers,
and let the device initialization deal with the full features space,
adjusting the relevant format strings accordingly.
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <69c78c432e28e146a8874b2a7d00e9cbd111b1ba.1758549625.git.pabeni@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The set_offload() argument list is already pretty long and
we are going to introduce soon a bunch of additional offloads.
Replace the offload arguments with a single struct and update
all the relevant call-sites.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <a9d4dd043b8c71b791e9ff05e17ef06072d9714e.1758549625.git.pabeni@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Report hashing capability so that virtio-net can deliver the correct
capability information to the guest.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250530-vdpa-v1-2-5af4109b1c19@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a boolean is_vhost_user field to the vhost_net
structure. This flag is initialized during vhost_net_init based
on whether the backend is vhost-user.
This refactoring simplifies checks for vhost-user specific behavior,
replacing direct comparisons of 'net->nc->info->type' with the new
flag. It improves readability and encapsulates the backend type
information directly within the vhost_net instance.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This commit refactors how the maximum transmit queue size for
virtio-net devices is determined, making the mechanism more generic
and extensible.
Previously, virtio_net_max_tx_queue_size() contained hardcoded
checks for specific network backend types (vhost-user and
vhost-vdpa) to determine their supported maximum queue size. This
created direct dependencies and would require modifications for
every new backend that supports variable queue sizes.
To improve flexibility, a new max_tx_queue_size field is added
to the vhost_net structure. This allows each network backend
to advertise its supported maximum transmit queue size directly.
The virtio_net_max_tx_queue_size() function now retrieves the max
TX queue size from the vhost_net struct, if available and set.
Otherwise, it defaults to VIRTIO_NET_TX_QUEUE_DEFAULT_SIZE.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This commit introduces a save_acked_features function pointer to
vhost_net and converts the vhost_net function into a generic dispatcher.
The vhost-user backend provides the callback, making its function static.
With this change, no other module has a direct dependency on the
vhost-user implementation.
This cleanup allows for the complete removal of the net/vhost-user.h
header file.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch continues the effort to decouple the generic vhost layer
from specific network backend implementations.
Previously, the vhost_net initialization code contained a hardcoded
check for the vhost-user client type to retrieve its acked features
by calling vhost_user_get_acked_features(). This exposed an
internal vhost-user function in a public header and coupled the two
modules.
The vhost-user backend is updated to provide a callback, and its
getter function is now static. The call site in vhost_net.c is
simplified to use the new generic helper, removing the type check and
the direct dependency.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previously, the vhost_net_get_feature_bits() function in
hw/net/vhost_net.c used a large switch statement to determine
the appropriate feature bits based on the NetClientDriver type.
This created unnecessary coupling between the generic vhost layer
and specific network backends (like TAP, vhost-user, and
vhost-vdpa).
This patch moves the definition of vhost feature bits directly into the
vhost_net structure for each relevant network client.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The get_vhost_net() function previously contained a large switch
statement to find the VHostNetState pointer based on the net
client's type. This created a tight coupling, requiring the generic
vhost layer to be aware of every specific backend that supported
vhost, such as tap, vhost-user, and vhost-vdpa.
This approach is not scalable and requires modifying a central function
for any new backend. It also forced each backend to expose its internal
getter function in a public header file.
This patch refactors the logic by introducing a new get_vhost_net
function pointer to the NetClientInfo struct. The central
get_vhost_net() function is now a simple, generic dispatcher that
invokes the callback provided by the net client.
Each backend now implements its own private getter and registers it in
its NetClientInfo.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is a cosmetic change with no functional impact.
The function vhost_set_vring_enable() is specific to vhost_net and
is used outside of vhost_net.c (specifically, in
hw/net/virtio-net.c). To prevent confusion with other similarly named
vhost functions, such as the one found in cryptodev-vhost.c, it has
been renamed to vhost_net_set_vring_enable(). This clarifies that the
function belongs to the vhost_net module.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The code to set the link status is currently located in
qmp_set_link(). This function identifies the device by name,
searches for the corresponding NetClientState, and then updates
the link status.
In some parts of the code, such as vhost-user.c, the
NetClientState are already available. Calling qmp_set_link()
from these locations leads to a redundant search for the clients.
This patch refactors the logic by introducing a new function,
net_client_set_link(), which accepts a NetClientState array
directly. qmp_set_link() is simplified to be a wrapper that
performs the client search and then calls the new function.
The vhost-user implementation is updated to use net_client_set_link()
directly, thereby eliminating the unnecessary client lookup.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Convert the data parameter of net_checksum_calculate() to void * to
save unnecessary casts for callers.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The ip_header is not actually guaranteed to be aligned. We attempt to
deal with this in some places such as net_checksum_calculate() by
using stw_be_p and so on to access the fields, but this is not
sufficient to be correct, because even accessing a byte member
within an unaligned struct is undefined behaviour. The clang
sanitizer will emit warnings like these if net_checksum_calculate()
is called:
Stopping network: ../../net/checksum.c:106:9: runtime error: member access within misaligned address 0x556aad9b502e for type 'struct ip_header', which requires 4 byte alignment
0x556aad9b502e: note: pointer points here
34 56 08 00 45 00 01 48 a5 09 40 00 40 11 7c 8b 0a 00 02 0f 0a 00 02 02 00 44 00 43 01 34 19 56
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../../net/checksum.c:106:9 in
../../net/checksum.c:106:9: runtime error: load of misaligned address 0x556aad9b502e for type 'uint8_t' (aka 'unsigned char'), which requires 4 byte alignment
0x556aad9b502e: note: pointer points here
34 56 08 00 45 00 01 48 a5 09 40 00 40 11 7c 8b 0a 00 02 0f 0a 00 02 02 00 44 00 43 01 34 19 56
^
Fix this by marking the ip_header struct as QEMU_PACKED, so that
the compiler knows that it might be unaligned and will generate
the right code for accessing fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241114141619.806652-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
net_hub_port_find is unused since 2018's commit
af1a5c3eb4 ("net: Remove the deprecated "vlan" parameter")
qemu_receive_packet_iov is unused since commit
ffbd2dbd8e ("e1000e: Perform software segmentation for loopback")
in turn it was the last user of qemu_net_queue_receive_iov.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While netmap implements virtio-net header, it does not implement
receive_raw(). Instead of implementing receive_raw for netmap, add
virtio-net headers in the common code and use receive_iov()/receive()
instead. This also fixes the buffer size for the virtio-net header.
Fixes: fbbdbddec0 ("tap: allow extended virtio header with hash info")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since qemu_set_vnet_hdr_len() is always called when
qemu_using_vnet_hdr() is called, we can merge them and save some code.
For consistency, express that the virtio-net header is not in use by
returning 0 with qemu_get_vnet_hdr_len() instead of having a dedicated
function, qemu_get_using_vnet_hdr().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Exactly nobody needs it there. Place the typedef in the header
that defines the struct.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 46d4d36d0b.
The reverted commit changed to emit warnings instead of errors when
vhost is requested but vhost initialization fails if vhostforce option
is not set.
However, vhostforce is not meant to ignore vhost errors. It was once
introduced as an option to commit 5430a28fe4 ("vhost: force vhost off
for non-MSI guests") to force enabling vhost for non-MSI guests, which
will have worse performance with vhost. The option was deprecated with
commit 1e7398a140 ("vhost: enable vhost without without MSI-X") and
changed to behave identical with the vhost option for compatibility.
Worse, commit bf769f742c ("virtio: del net client if net_init_tap_one
failed") changed to delete the client when vhost fails even when the
failure only results in a warning. The leads to an assertion failure
for the -netdev command line option.
The reverted commit was intended to avoid that the vhost initialization
failure won't result in a corrupted netdev. This problem should have
been fixed by deleting netdev when the initialization fails instead of
ignoring the failure with an arbitrary option. Fortunately, commit
bf769f742c ("virtio: del net client if net_init_tap_one failed"),
mentioned earlier, implements this behavior.
Restore the correct semantics and fix the assertion failure for the
-netdev command line option by reverting the problematic commit.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use of String is problematic, because it results in awkward interface
documentation. The previous commit cleaned up one instance.
Move String out of common.json next to its remaining users in net.json
to discourage reuse elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-15-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Also remove the stale declaration of host_net_devices; the actual
definition was removed long ago in commit 7cc28cb061 ("net: Remove
the deprecated 'host_net_add' and 'host_net_remove' HMP commands")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
These old functions can be removed now too. Let net_param_nic() print
the full set of network devices directly, and also make it note that a
list more specific to this platform/config will be available by using
'-nic model=help' instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
There are no callers of this function any more, as they have all been
converted to qemu_{create,configure}_nic_device().
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This will instantiate any NICs which live on a given bus type. Each bus
is allowed *one* substitution (for PCI it's virtio → virtio-net-pci, for
Xen it's xen → xen-net-device; no point in overengineering it unless we
actually want more).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Most code which directly accesses nd_table[] and nb_nics uses them for
one of two things. Either "I have created a NIC device and I'd like a
configuration for it", or "I will create a NIC device *if* there is a
configuration for it". With some variants on the theme around whether
they actually *check* if the model specified in the configuration is
the right one.
Provide functions which perform both of those, allowing platforms to
be a little more consistent and as a step towards making nd_table[]
and nb_nics private to the net code.
One might argue that platforms ought to be consistent about whether
they create the unconfigured devices or not, but making significant
user-visible changes is explicitly *not* the intent right now.
The new functions leave the 'model' field of the NICInfo as NULL after
using it for the default NIC model, unlike the qemu_check_nic_model()
function which does set nd->model to match default_model explicitly.
This is acceptable because there is no code which consumes nd->model
except this NIC-matching code in net/net.c, and no reasonable excuse
for any code wanting to use nd->model in future.
Also export the qemu_find_nic_info() helper, as some platforms have
special cases they need to handle.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
This implementation follows what bottom half does, but it does not add
a tracepoint for the case that the network device backend started
delivering a packet to a device which is already engaging in I/O. This
is because such reentrancy frequently happens for
qemu_flush_queued_packets() and is insignificant.
Fixes: CVE-2023-3019
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
In preparation for such a change, add MemReentrancyGuard * as a
parameter of qemu_new_nic().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fix:
net/net.c:1680:35: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
bool netdev_is_modern(const char *optarg)
^
net/net.c:1714:38: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
void netdev_parse_modern(const char *optarg)
^
net/net.c:1728:60: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
void net_client_parse(QemuOptsList *opts_list, const char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-4-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Tap indicates support for USO features according to
capabilities of current kernel module.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychecnko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Passing additional parameters (USOv4 and USOv6 offloads) when
setting TAP offloads
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It is possible to have another VLAN tag even if the packet is already
tagged.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The uses of uint8_t pointers were misleading as they are never accessed
as an array of octets and it even require more strict alignment to
access as struct eth_header.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Section 13.7.15 Receive Length Error Count says:
> Packets over 1522 bytes are oversized if LongPacketEnable is 0b
> (RCTL.LPE). If LongPacketEnable (LPE) is 1b, then an incoming packet
> is considered oversized if it exceeds 16384 bytes.
> These lengths are based on bytes in the received packet from
> <Destination Address> through <CRC>, inclusively.
As QEMU processes packets without CRC, the number of bytes for CRC
need to be subtracted. This change adds some size definitions to be used
to derive the new size thresholds to eth.h.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The old eth_setup_vlan_headers has no user so remove it and rename
eth_setup_vlan_headers_ex.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb does not properly ensure the buffer passed to
net_rx_pkt_set_protocols() is contiguous for the entire L2/L3/L4 header.
Allow it to pass scattered data to net_rx_pkt_set_protocols().
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb, a new network device emulation, will need SCTP checksum offloading.
Currently eth_get_protocols() has a bool parameter for each protocol
currently it supports, but there will be a bit too many parameters if
we add yet another protocol.
Introduce an enum type, EthL4HdrProto to represent all L4 protocols
eth_get_protocols() support with one parameter.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The values returned by eth_get_protocols() are used to perform RSS,
checksumming and segmentation. Even when a packet signals the use of the
protocols which these operations can be applied to, the headers for them
may not be present because of too short packet or fragmentation, for
example. In such a case, the operations cannot be applied safely.
Report the presence of headers instead of whether the use of the
protocols are indicated with eth_get_protocols(). This also makes
corresponding changes to the callers of eth_get_protocols() to match
with its new signature and to remove redundant checks for fragmentation.
Fixes: 75020a7021 ("Common definitions for VMWARE devices")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There was no proper implementation of TCP segmentation before this
change, and net_tx_pkt relied solely on IPv4 fragmentation. Not only
this is not aligned with the specification, but it also resulted in
corrupted IPv6 packets.
This is particularly problematic for the igb, a new proposed device
implementation; igb provides loopback feature for VMDq and the feature
relies on software segmentation.
Implement proper TCP segmentation in net_tx_pkt to fix such a scenario.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
filter-dump specifiees Ethernet as PCAP LinkType, which does not expect
virtio-net header. Having virtio-net header in such PCAP file breaks
PCAP unconsumable. Unfortunately currently there is no LinkType for
virtio-net so for now strip virtio-net header to convert the output to
Ethernet.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The code that collects the available NIC models is not really specific
to PCI anymore and will be required in the next patch, too, so let's
move this into a new separate function in net.c instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add functions to support configure interrupt in virtio_net
Add the functions to support vhost_net_config_pending
and vhost_net_config_mask.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-9-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell
Paolo Bonzini
Nguyen Dinh Phi
Paolo Abeni
Akihiko Odaki
Laurent Vivier
Dr. David Alan Gilbert
Markus Armbruster
David Woodhouse
Philippe Mathieu-Daudé
Yuri Benditovich
Andrew Melnychenko
Thomas Huth
Cindy Lu