Homogenizes the command capabilities with QMP.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Events with the 'vcpu' property are conditionally emitted according to
their per-vCPU state. Other events are emitted normally based on their
global tracing state.
Note that the per-vCPU condition check applies to all tracing backends.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Eliminates a future compilation error when UI code includes the tracing
headers (indirectly pulling "disas/bfd.h" through "qom/cpu.h") and
GLib's i18n '_' macro.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A new event attribute 'cpu_id' is added to have a separate ID
space ('TRACE_VCPU_*') for all events with the 'vcpu' property.
These are later used to identify which events are enabled on each vCPU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
Also fixed coding style on for(;;) and else statement as suggested by
Eric Blake <eblake@redhat.com> since the patch modifies these lines or
close enough.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860252322.30668.18276041739086338328.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860251784.30668.17339867835129075077.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Here's what ought to be the final ppc pull request before the 2.7 hard
freeze. This set contains a rework of the DBDMA device for Mac
platforms, and some assorted cleanups and bugfixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=K5vl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160718' into staging
ppc patch queue 2016-07-18
Here's what ought to be the final ppc pull request before the 2.7 hard
freeze. This set contains a rework of the DBDMA device for Mac
platforms, and some assorted cleanups and bugfixes.
# gpg: Signature made Mon 18 Jul 2016 05:35:27 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160718:
ppc: Yet another fix for the huge page support detection mechanism
target-ppc: fix left shift overflow in hpte_page_shift
ppc/mmu-hash64: Remove duplicated #include statement
ppc: abort if compat property contains an unknown value
spapr: Ensure CPU cores are added contiguously and removed in LIFO order
vfio/spapr: Remove stale ioctl() call
ppc: Fix support for odd MSR combinations
dbdma: reset io->processing flag for unassigned DBDMA channel rw accesses
dbdma: set FLUSH bit upon reception of flush command for unassigned DBDMA channels
dbdma: fix load_word/store_word value endianness
dbdma: fix endian of DBDMA_CMDPTR_LO during branch
dbdma: add per-channel debugging enabled via DEBUG_DBDMA_CHANMASK
dbdma: always define DBDMA_DPRINTF and enable debug with DEBUG_DBDMA
spapr: fix core unplug crash
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 86b50f2e1b ("Disable huge page support if it is not available
for main RAM") already made sure that huge page support is not announced
to the guest if the normal RAM of non-NUMA configurations is not backed
by a huge page filesystem. However, there is one more case that can go
wrong: NUMA is enabled, but the RAM of the NUMA nodes are not configured
with huge page support (and only the memory of a DIMM is configured with
it). When QEMU is started with the following command line for example,
the Linux guest currently crashes because it is trying to use huge pages
on a memory region that does not support huge pages:
qemu-system-ppc64 -enable-kvm ... -m 1G,slots=4,maxmem=32G -object \
memory-backend-file,policy=default,mem-path=/hugepages,size=1G,id=mem-mem1 \
-device pc-dimm,id=dimm-mem1,memdev=mem-mem1 -smp 2 \
-numa node,nodeid=0 -numa node,nodeid=1
To fix this issue, we've got to make sure to disable huge page support,
too, when there is a NUMA node that is not using a memory backend with
huge page support.
Fixes: 86b50f2e1b
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ps->pte_enc is a 32-bit value, which is shifted left and then compared
to a 64-bit value. It needs a cast before the shift.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is not possible to set the compat property to an unknown value with
powerpc_set_compat(). Something must have gone terribly wrong in QEMU,
if we detect an "Internal error" in powerpc_get_compat(). Let's abort then.
This patch also drops the "max_compat ? *max_compat : -1" construct. It is
useless since max_compat is dereferenced a few lines above.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If CPU core addition or removal is allowed in random order leading to
holes in the core id range (and hence in the cpu_index range), migration
can fail as migration with holes in cpu_index range isn't yet handled
correctly.
Prevent this situation by enforcing the addition in contiguous order
and removal in LIFO order so that we never end up with holes in
cpu_index range.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This ioctl() call to VFIO_IOMMU_SPAPR_TCE_REMOVE was left over from an
earlier version of the code and has since been folded into
vfio_spapr_remove_window().
It wasn't caught because although the argument structure has been removed,
the libc function remove() means this didn't trigger a compile failure.
The ioctl() was also almost certain to fail silently and harmlessly with
the bogus argument, so this wasn't caught in testing.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
MacOS uses an architecturally illegal MSR combination that
seems nonetheless supported by 32-bit processors, which is
to have MSR[PR]=1 and one or more of MSR[DR/IR/EE]=0.
This adds support for it. To work properly we need to also
properly include support for PR=1,{I,D}R=0 to the MMU index
used by the qemu TLB.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Otherwise MacOS 9 hangs upon shutdown.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This fixes MacOS 9 whereby it continually flushes and polls the status bits
until they are set to indicate a successful flush.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The values to read/write to/from physical memory are copied directly to the
physical address with no endian swapping required.
Also add some extra information to debugging output while we are here.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current DBDMA command is stored in little-endian format, so make sure
we convert it to match our CPU when updating the DBDMA_CMDPTR_LO register.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
By default large amounts of DBDMA debugging are produced when often it is just
1 or 2 channels that are of interest. Introduce DEBUG_DBDMA_CHANMASK to allow
the developer to select the channels of interest at compile time, and then
further add the extra channel information to each debug statement where
possible.
Also clearly mark the start/end of DBDMA_run_bh to allow tracking the bottom
half execution.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Enabling DBDMA_DPRINTF unconditionally ensures that any errors in debug
statements are picked up immediately.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the host has 8 threads/core and the guest is started with:
-smp cores=1,threads=4,maxcpus=12
It is possible to crash QEMU by doing:
(qemu) device_add host-spapr-cpu-core,core-id=16,id=foo
(qemu) device_del foo
Segmentation fault
This happens because spapr_core_unplug() assumes cpu_dt_id == core_id.
As long as cpu_dt_id is derived from the non-table cpu_index, this is
only true when you plug cores with contiguous ids.
It is safer to be consistent: the DR connector was created with an
index that is immediately written to cc->core_id, and spapr_core_plug()
also relies on cc->core_id.
Let's use it also in spapr_core_unplug().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* add virtio-mmio transport base address to device path
(avoid an assertion failure with multiple virtio-scsi-devices)
* revert hw/ptimer commit 5a50307 which causes regressions on
SPARC guests
* use Neon to accelerate zero-page checking on AArch64 hosts
* set the MPIDR for TCG to match how KVM does it (and fit with
GICv2/GICv3 restrictions on SGI target lists)
* add some missing AArch32 TLBI hypervisor TLB operations
* m25p80: Fix QIOR/DIOR handling for Winbond
* hw/misc: fix typo in Aspeed SCU hw-strap2 property name
* ast2400: pretend DMAs are done for U-boot
* ast2400: some minor code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+HaT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160714' into staging
target-arm queue:
* add virtio-mmio transport base address to device path
(avoid an assertion failure with multiple virtio-scsi-devices)
* revert hw/ptimer commit 5a50307 which causes regressions on
SPARC guests
* use Neon to accelerate zero-page checking on AArch64 hosts
* set the MPIDR for TCG to match how KVM does it (and fit with
GICv2/GICv3 restrictions on SGI target lists)
* add some missing AArch32 TLBI hypervisor TLB operations
* m25p80: Fix QIOR/DIOR handling for Winbond
* hw/misc: fix typo in Aspeed SCU hw-strap2 property name
* ast2400: pretend DMAs are done for U-boot
* ast2400: some minor code cleanups
# gpg: Signature made Thu 14 Jul 2016 17:21:30 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20160714:
ast2400: externalize revision numbers
ast2400: pretend DMAs are done for U-boot
ast2400: replace aspeed_smc_is_implemented()
hw/misc: fix typo in Aspeed SCU hw-strap2 property name
m25p80: Fix QIOR/DIOR handling for Winbond
target-arm: Add missed AArch32 TLBI sytem registers
hw/arm/virt: tcg: adjust MPIDR like KVM
gic: provide defines for v2/v3 targetlist sizes
target-arm: Use Neon for zero checking
Revert "hw/ptimer: Perform counter wrap around if timer already expired"
virtio-mmio: format transport base address in BusClass.get_dev_path
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AST2400_A0_SILICON_REV is defined twice. Fix this by including the
definition in the header file as well as the routine to check if a
silicon revision is supported. It will useful to reuse in other
controllers.
Let's add also AST2500_A0_SILICON_REV for future use.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-5-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
U-boot does SPI timing calibration using DMA tranfers. To let the
initialization continue, we fake success by setting the DMA status of
the Interrupt Control Register.
For the moment, DMA support is not required as it is not used in
normal operation.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-4-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
aspeed_smc_is_implemented() filters invalid registers in a peculiar
way. Let's remove it and open code the if conditions. It serves the
same purpose, the aesthetic is better, and new registers can easily be
added.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-3-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-2-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Winbond also support continuous read mode, but as an opposite for other
flash type read mode clock cycles are included to dummy cycles number.
This path add proper handling of read mode byte and update needed
dummy cycles. QPI mode and dummy cycles configuration are not supported.
Signed-off-by: Marcin Krzeminski <marcin.krzeminski@nokia.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467809036-6986-1-git-send-email-marcin.krzeminski@nokia.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some PL2 related TLBI system registers are missed in AArch32
implementation. The patch fixes it.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1468328885-3217862-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
KVM adjusts the MPIDR of guest vcpus based on the architecture of
the host, 32-bit vs. 64-bit, and, for 64-bit, also on the type of
GIC the guest is using. To be consistent and improve SGI efficiency
we make the same adjustments for TCG as 64-bit KVM hosts. We neglect
to add consistency with 32-bit KVM hosts, as that would reduce SGI
efficiency and KVM is expected to change.
As MPIDR is a system register, and thus guest visible, we only make
adjustments for current and later versioned machines.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1467378129-23302-3-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1467378129-23302-2-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use Neon instructions to perform zero checking of
buffer. This is helps in reducing total migration time.
Use case: Idle VM live migration with 4 VCPUS and 8GB ram
running CentOS 7.
Without Neon, the Total migration time is 3.5 Sec
Migration status: completed
total time: 3560 milliseconds
downtime: 33 milliseconds
setup: 5 milliseconds
transferred ram: 297907 kbytes
throughput: 685.76 mbps
remaining ram: 0 kbytes
total ram: 8519872 kbytes
duplicate: 2062760 pages
skipped: 0 pages
normal: 69808 pages
normal bytes: 279232 kbytes
dirty sync count: 3
With Neon, the total migration time is 2.9 Sec
Migration status: completed
total time: 2960 milliseconds
downtime: 65 milliseconds
setup: 4 milliseconds
transferred ram: 299869 kbytes
throughput: 830.19 mbps
remaining ram: 0 kbytes
total ram: 8519872 kbytes
duplicate: 2064313 pages
skipped: 0 pages
normal: 70294 pages
normal bytes: 281176 kbytes
dirty sync count: 3
Signed-off-by: Vijaya Kumar K <vijayak@cavium.com>
Signed-off-by: Suresh <ksuresh@cavium.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1467190029-694-2-git-send-email-vijayak@cavium.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Software should see timer counter wraparound only after IRQ being triggered.
This fixes regression introduced by the commit 5a50307 ("hw/ptimer: Perform
counter wrap around if timer already expired"), resulting in monotonic timer
jumping backwards on SPARC emulated machine running NetBSD guest OS, as
reported by Mark Cave-Ayland.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 20160708132206.2080-1-digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the moment the following QEMU command line triggers an assertion
failure (minimal reproducer by Cole):
qemu-system-aarch64 \
-machine virt-2.6,accel=tcg \
-nodefaults \
-no-user-config \
-nographic -monitor stdio \
-device virtio-scsi-device,id=scsi0 \
-device virtio-scsi-device,id=scsi1 \
-drive file=foo.img,format=raw,if=none,id=d0 \
-device scsi-hd,bus=scsi0.0,drive=d0 \
-drive file=foo.img,format=raw,if=none,id=d1 \
-device scsi-hd,bus=scsi1.0,drive=d1
qemu-system-aarch64: migration/savevm.c:615:
vmstate_register_with_alias_id:
Assertion `!se->compat || se->instance_id == 0' failed.
The reason is that the vmstate sections for the two scsi-hd devices are
not uniquely identifiable by name.
The direct parent buses of the scsi-hd devices -- scsi0.0 and scsi1.0 --
support the BusClass.get_dev_path member function. scsibus_get_dev_path()
formats a device path prefix with the help of its topologically parent
bus, and then appends the chan🆔lun triplet to it. For both scsi-hd
devices, this triplet is 0:0:0.
(Here we use "device path" in the QEMU migration sense, for vmstate
section identification, not in the OFW or UEFI device path senses.)
The virtio-scsi HBA is plugged into the virtio-mmio bus (implemented by
the internal VirtIOMMIOProxy device). This bus class
(TYPE_VIRTIO_MMIO_BUS) inherits, as its get_dev_path() member function,
the virtio_bus_get_dev_path() method from its parent class
(TYPE_VIRTIO_BUS).
virtio_bus_get_dev_path() does not format any kind of device address on
its own; "virtio addresses" are transport-specific. Therefore
virtio_bus_get_dev_path() asks the topologically parent bus of the proxy
object (implementing the specific virtio transport) to format the address
of the proxy object.
(For virtio-pci devices (where the proxy is an instance of VirtIOPCIProxy,
plugged into a PCI bus), this ends up in pcibus_get_dev_path().)
However, VirtIOMMIOProxy is usually (in practice: always) plugged into
"main-system-bus", the singleton TYPE_SYSTEM_BUS object. This BusClass
does not support formatting QEMU vmstate device paths at all (as
SysBusDevice objects can have zero or more IO ports and zero or more MMIO
regions). Hence the formatting request delegated from
virtio_bus_get_dev_path() gets answered with NULL.
The end result is that the two scsi-hd devices end up with the same device
path "0:0:0", which triggers the assert.
We can solve this by recognizing that virtio-mmio transports are
distinguished from each other by their base addresses in MMIO address
space. Implement virtio_mmio_bus_get_dev_path() as follows:
(1) The virtio device whose devpath is to be formatted resides on a
virtio-mmio bus that is implemented by a VirtIOMMIOProxy object. Ask
the parent bus of VirtIOMMIOProxy to format the device path of
VirtIOMMIOProxy, as a path prefix. (This is identical to what
virtio_bus_get_dev_path() does.)
(2) Append the base address of VirtIOMMIOProxy to the device path, such
as:
- virtio-mmio@000000000a003e00,
- virtio-mmio@000000000a003c00.
Given that these device paths are placed in the migration stream, step (2)
above, if done unconditionally, would break migration. So make that step
conditional on a new VirtIOMMIOProxy property, which is enabled for 2.7
machine types and later.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Kevin Zhao <kevin.zhao@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Tom Hanson <thomas.hanson@linaro.org>
Reported-by: Kevin Zhao <kevin.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1467739394-28357-1-git-send-email-lersek@redhat.com
Fixes: https://bugs.launchpad.net/qemu/+bug/1594239
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This optionrom is based on linuxboot.S.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <1464027093-24073-2-git-send-email-rjones@redhat.com>
[Add -fno-toplevel-reorder, support clang without -m16. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXhiZDAAoJEL/70l94x66DrGAH/10ZlIYugx6Ijn12qy3irmIC
hbMY6HWjvPlk8ZpAcPa3UXNQvqhTwqhSMXRiwp9aNPlRUqrXnDXZapQunJveKSAn
luLE8ISRKODz0W39qg6znyb4R1ipCGJWwjBCQmLWZuD7883JJ2DsykTATRx7yKQF
qsq9r/DPBTfD3vnOCTbqp0GeB80UFleTNm+K7cct8M1+WzfiwKeVHk9CAKy0fkTH
hS+YnV9UWYL6PR/w+uZ+2MfgH5er4X794+HaNbio0QJJbEZ2bsL4A3Prh7pUonN7
qJoCbT4W79scrnWQ40RbWRXOMfUk4J7gIMEZYar8z6NmqnamNZgxbWj3dv6pO+k=
=sz/L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
# gpg: Signature made Wed 13 Jul 2016 12:30:11 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
hostmem: detect host backend memory is being used properly
hostmem: fix QEMU crash by 'info memdev'
char: do not use atexit cleanup handler
net: do not use atexit for cleanup
slirp: use exit notifier for slirp_smb_cleanup
tap: use an exit notifier to call down_script
util: Fix MIN_NON_ZERO
qemu-sockets: use qapi_free_SocketAddress in cleanup
disas: avoid including everything in headers compiled from C++
json-streamer: fix double-free on exiting during a parse
main-loop: check return value before using pointer
Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD.
scsi-bus: Use longer sense buffer with scanners
scsi-bus: Add SCSI scanner support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FLASH chip on XTFPGA boards is connected with 16-bit-wide interface.
Latest U-Boot can see the difference and does not work correctly with
32-bit-wide interface.
Set FLASH chip 'width' property to 2.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=null
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Wed 13 Jul 2016 12:46:17 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (34 commits)
iotests: Make 157 actually format-agnostic
vvfat: Fix qcow write target driver specification
hmp: show all of snapshot info on every block dev in output of 'info snapshots'
hmp: use snapshot name to determine whether a snapshot is 'fully available'
qemu-iotests: Test naming of throttling groups
blockdev: Fix regression with the default naming of throttling groups
vmdk: fix metadata write regression
Improve block job rate limiting for small bandwidth values
qcow2: Fix qcow2_get_cluster_offset()
qemu-io: Use correct range limitations
qcow2: Avoid making the L1 table too big
qemu-img: Use strerror() for generic resize error
block: Remove BB options from blockdev-add
qemu-iotests: Test setting WCE with qdev
block/qdev: Allow configuring rerror/werror with qdev properties
commit: Fix use of error handling policy
block/qdev: Allow configuring WCE with qdev properties
block/qdev: Allow node name for drive properties
coroutine: move entry argument to qemu_coroutine_create
test-coroutine: prepare for the next patch
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEvBAABCAAZBQJXhikBEhxtcmVpdHpAcmVkaGF0LmNvbQAKCRA7sUIC6DisrT8r
B/9RRIP1jCtgPIFd/xdlKKURbxZ91ffcfVGZ7atur2x6PZNpvH83dl0haK+KMNq4
FjHfgvOmVmInWORNvambwaplXqgarp/Cyt0xqtj93bGN14YMw0ByJ8M844jIQZjr
T4dnH4usU5pG8lQ+jusQXMtThn9zRoi7dbJ7zzxYWJI+ExP/HpIjwoq+tkq84KbR
/WVJCBLGIVsNTD7Q/cl4lzSoz/HgjBf6wdUZTWhX0cjZBmCFgXvGH7+Blcne2/aX
kr8CSIfiOHDI5ZwvM2awYzcttAecErh3kOJRsJ1N5TscGagsL0xdno7Ghl6iRT84
JRxaZ1tIfEiIP/Ov+d9macc0
=Lvm2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-07-13' into queue-block
Block patches (v2) for the block queue.
# gpg: Signature made Wed Jul 13 13:41:53 2016 CEST
# gpg: using RSA key 0x3BB14202E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
# Subkey fingerprint: 58B3 81CE 2DC8 9CF9 9730 EE64 3BB1 4202 E838 ACAD
* mreitz/tags/pull-block-for-kevin-2016-07-13:
iotests: Make 157 actually format-agnostic
vvfat: Fix qcow write target driver specification
hmp: show all of snapshot info on every block dev in output of 'info snapshots'
hmp: use snapshot name to determine whether a snapshot is 'fully available'
qemu-iotests: Test naming of throttling groups
blockdev: Fix regression with the default naming of throttling groups
vmdk: fix metadata write regression
Improve block job rate limiting for small bandwidth values
qcow2: Fix qcow2_get_cluster_offset()
qemu-io: Use correct range limitations
qcow2: Avoid making the L1 table too big
qemu-img: Use strerror() for generic resize error
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 157 pretends not to care about the image format used, but in fact
it does due to the format name not being filtered in its output. This
patch adds filtering and changes the reference output accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160711132246.3152-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
First, bdrv_open_child() expects all options for the child to be
prefixed by the child's name (and a separating dot). Second,
bdrv_open_child() does not take ownership of the QDict passed to it but
only extracts all options for the child, so if a QDict is created for
the sole purpose of passing it to bdrv_open_child(), it needs to be
freed afterwards.
This patch makes vvfat adhere to both of these rules.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160711135452.11304-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, the output of 'info snapshots' shows fully available snapshots.
It's opaque, hides some snapshot information to users. It's not convenient
if users want to know more about all of snapshot information on every block
device via monitor.
Follow Kevin's and Max's proposals, The patch makes the output more detailed:
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
List of partial (non-loadable) snapshots on 'drive_image1':
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
Signed-off-by: Lin Ma <lma@suse.com>
Message-id: 1467869164-26688-3-git-send-email-lma@suse.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently qemu uses snapshot id to determine whether a snapshot is fully
available, It causes incorrect output in some scenario.
For instance:
(qemu) info block
drive_image1 (#block113): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk0.qcow2
(qcow2)
Cache mode: writeback
drive_image2 (#block349): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk1.qcow2
(qcow2)
Cache mode: writeback
(qemu)
(qemu) info snapshots
There is no snapshot available.
(qemu)
(qemu) snapshot_blkdev_internal drive_image1 snap1
(qemu)
(qemu) info snapshots
There is no suitable snapshot available
(qemu)
(qemu) savevm checkpoint-1
(qemu)
(qemu) info snapshots
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
(qemu)
$ qemu-img snapshot -l disk0.qcow2
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
2 checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
$ qemu-img snapshot -l disk1.qcow2
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 checkpoint-1 0 2016-05-22 16:58:07 00:02:06.813
The patch uses snapshot name instead of snapshot id to determine whether a
snapshot is fully available and uses '--' instead of snapshot id in output
because the snapshot id is not guaranteed to be the same on all images.
For instance:
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1467869164-26688-2-git-send-email-lma@suse.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Throttling groups are named using the 'group' parameter of the
block_set_io_throttle command and the throttling.group command-line
option. If that parameter is unspecified the groups get the name of
the block device.
This patch adds a new test to check the naming of throttling groups.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: d87d02823a6b91609509d8bb18e2f5dbd9a6102c.1467986342.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Lluís Vilanova
Peter Maydell
Thomas Huth
Paolo Bonzini
Greg Kurz
Bharata B Rao
David Gibson
Benjamin Herrenschmidt
Mark Cave-Ayland
Cédric Le Goater
Marcin Krzeminski
Sergey Sorokin
Andrew Jones
Vijay
Dmitry Osipenko
Laszlo Ersek
Marc Marí
Max Filippov
Kevin Wolf
Max Reitz
Lin Ma
Alberto Garcia