Avoid
In file included from ../publish/qapi/qapi-schema.json:53:
.../qapi/migration.json:1750:1: documentation line longer than 70 characters
Fixes: ae00f0088f ("migration/qmp: Update "resume" flag doc in "migrate" command")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Consistently separate definitions with a single blank line.
Consistently separate member descriptions with a blank line.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20251103082354.3273027-4-armbru@redhat.com>
Sweep the entire documentation again. Last done in commit
01bed0ff14 (qapi: Refill doc comments to conform to conventions).
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20251103082354.3273027-3-armbru@redhat.com>
The description of Member @nsamples is indented incorrectly. Comes
out like
Members:
[...]
nsamples (int, optional) – set the number of samples per
read/write calls (default to 480,
10ms at 48kHz).
Fixing the indentation makes it come out like
Members:
[...]
nsamples (int, optional) – set the number of samples per
read/write calls (default to 480, 10ms at 48kHz).
Fixes: 19c628f2f5 (dbus: add -audio dbus nsamples option)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251103082354.3273027-2-armbru@redhat.com>
Currently, when postcopy starts, the source VM starts switchover and
sends a package containing the state of all non-postcopiable devices.
When the destination loads this package, the switchover is complete and
the destination VM starts. However, if the device state load fails or
the destination side crashes, the source side is already in
POSTCOPY_ACTIVE state and cannot be recovered, even when it has the most
up-to-date machine state as the destination has not yet started.
This patch introduces a new POSTCOPY_DEVICE state which is active while
the destination machine is loading the device state, is not yet running,
and the source side can be resumed in case of a migration failure.
Return-path is required for this state to function, otherwise it will be
skipped in favor of POSTCOPY_ACTIVE.
To transition from POSTCOPY_DEVICE to POSTCOPY_ACTIVE, the source
side uses a PONG message that is a response to a PING message processed
just before the POSTCOPY_RUN command that starts the destination VM.
Thus, this feature is effective even if the destination side does not
yet support this new state.
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Link: https://lore.kernel.org/r/20251103183301.3840862-9-jmarcin@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
It wasn't obvious how the resume flag should be used when staring at the
QAPI doc. Enrich it to be crystal clear.
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/20251022190425.2730441-1-peterx@redhat.com
[peterx: amended wordings, per markus]
Signed-off-by: Peter Xu <peterx@redhat.com>
This information can be useful both for debugging and for management
tools trying to configure guest devices with the optimal limits
(possibly across multiple hosts). There is no reason not to make it
available, so just add it to BlockNodeInfo.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20251024123041.51254-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It was deprecated in 9.2, time to remove.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It was deprecated in 9.2, time to remove.
Note, that (which become obvious with this commit) we forget to do some
checks for reconnect-ms options, for example, it was silently ignored
for listening server, instead of error-out. The commit fixes this, as
now we use reconnect_ms everywhere.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow limiting the amount of log output sent. Allow up to 1 MiB.
In case the guest log buffer is larger than 1 MiB limit the output
instead of throwing an error.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20251017115006.2696991-4-kraxel@redhat.com>
Starting with the edk2-stable202508 tag OVMF (and ArmVirt too) have
optional support for logging to a memory buffer. There is guest side
support -- for example in linux kernels v6.17+ -- to read that buffer.
But that might not helpful if your guest stops booting early enough that
guest tooling can not be used yet. So host side support to read that
log buffer is a useful thing to have.
This patch implements the query-firmware-log qmp monitor command to
read the firmware log.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20251017115006.2696991-2-kraxel@redhat.com>
Add QAPI event SCLP_CPI_INFO_AVAILABLE to notify the availability
of Control-Program Identification data in QOM.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20251016121708.334133-1-shalini@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The recently-introduced query-mshv command is a duplicate of query-kvm,
and neither provides a full view of which accelerators are supported
by a particular binary of QEMU and which is in use.
KVM was the first accelerator added to QEMU, predating QOM and TYPE_ACCEL,
so it got a pass. But now, instead of adding a badly designed copy, solve
the problem completely for all accelerators with a command that provides
the whole picture:
>> {"execute": "query-accelerators"}
<< {"return": {"enabled": "tcg", "present": ["kvm", "mshv", "qtest", "tcg", "xen"]}}
Cc: Praveen K Paladugu <prapal@microsoft.com>
Cc: Magnus Kulke <magnuskulke@linux.microsoft.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow to query mshv capabilities via query-mshv QMP and info mshv HMP commands.
Signed-off-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Link: https://lore.kernel.org/r/20250916164847.77883-25-magnuskulke@linux.microsoft.com
[Fix "since" version. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the ability to map a host unix socket to a guest tcp socket when
using the slirp backend. This feature was added in libslirp version 4.7.0.
A new syntax for unix socket: -hostfwd=unix:hostpath-[guestaddr]:guestport
Signed-off-by: Viktor Kurilko <murlockkinght@gmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-ID: <20250808143904.363907-1-murlockkinght@gmail.com>
Create a QMP command to be used for generic ACPI APEI hardware error
injection (HEST) via GHESv2, and add support for it for ARM guests.
Error injection uses ACPI_HEST_SRC_ID_QMP source ID to be platform
independent. This is mapped at arch virt bindings, depending on the
types supported by QEMU and by the BIOS. So, on ARM, this is supported
via ACPI_GHES_NOTIFY_GPIO notification type.
This patch was co-authored:
- original ghes logic to inject a simple ARM record by Shiju Jose;
- generic logic to handle block addresses by Jonathan Cameron;
- generic GHESv2 error inject by Mauro Carvalho Chehab;
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-authored-by: Shiju Jose <shiju.jose@huawei.com>
Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <81e2118b3c8b7e5da341817f277d61251655e0db.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend the VirtioDeviceFeatures struct with an additional u64
to track unknown features in the 64-127 bit range and decode
the full virtio features spaces for vhost and virtio devices.
Also add entries for the soon-to-be-supported virtio net GSO over
UDP features.
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <e51969f94d89045b333f1bc5ef5fca9e12fc371a.1758549625.git.pabeni@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the cpr-exec migration mode. Usage:
qemu-system-$arch -machine aux-ram-share=on ...
migrate_set_parameter mode cpr-exec
migrate_set_parameter cpr-exec-command \
<arg1> <arg2> ... -incoming <uri-1> \
migrate -d <uri-1>
The migrate command stops the VM, saves state to uri-1,
directly exec's a new version of QEMU on the same host,
replacing the original process while retaining its PID, and
loads state from uri-1. Guest RAM is preserved in place,
albeit with new virtual addresses.
The new QEMU process is started by exec'ing the command
specified by the @cpr-exec-command parameter. The first word of
the command is the binary, and the remaining words are its
arguments. The command may be a direct invocation of new QEMU,
or may be a non-QEMU command that exec's the new QEMU binary.
This mode creates a second migration channel that is not visible
to the user. At the start of migration, old QEMU saves CPR state
to the second channel, and at the end of migration, it tells the
main loop to call cpr_exec. New QEMU loads CPR state early, before
objects are created.
Because old QEMU terminates when new QEMU starts, one cannot
stream data between the two, so uri-1 must be a type,
such as a file, that accepts all data before old QEMU exits.
Otherwise, old QEMU may quietly block writing to the channel.
Memory-backend objects must have the share=on attribute, but
memory-backend-epc is not supported. The VM must be started with
the '-machine aux-ram-share=on' option, which allows anonymous
memory to be transferred in place to the new process. The memfds
are kept open across exec by clearing the close-on-exec flag, their
values are saved in CPR state, and they are mmap'd in new QEMU.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/1759332851-370353-7-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Create the cpr-exec-command migration parameter, defined as a list of
strings. It will be used for cpr-exec migration mode in a subsequent
patch, and contains forward references to cpr-exec mode in the qapi
doc.
No functional change, except that cpr-exec-command is shown by the
'info migrate' command.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/1759332851-370353-5-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
qemu_rbd_get_specific_info() has at least two problems:
The first is that it issues a blocking rbd_read() call in order to probe
the encryption format for the image while querying the node. This means
that if the connection to the server goes down, not only I/O is stuck
(which is unavoidable), but query-names-block-nodes will actually make
the whole QEMU instance unresponsive. .bdrv_get_specific_info
implementations shouldn't perform blocking operations, but only return
what is already known.
The second is that the information returned isn't even correct. If the
image is already opened with encryption enabled at the RBD level, we'll
probe for "double encryption", i.e. if the encrypted data contains
another encryption header. If it doesn't (which is the normal case), we
won't return the encryption format. If it does, we return misleading
information because it looks like we're talking about the outer level
(the encryption format of the image itself) while the information is
about an encryption header in the guest data.
Fix this by storing the encryption format in BDRVRBDState when the image
is opened (and we do blocking operations anyway) and returning only the
stored information in qemu_rbd_get_specific_info().
The information we'll store is either the actual encryption format that
we enabled on the RBD level, or if the image is unencrypted, the result
of the same probing as we previously did when querying the node. Probing
image formats based on content that can be modified by the guest has
long been known as problematic, but as long as we only output it to the
user instead of making decisions based on it, it should be okay. It is
undoubtedly useful in the context of 'qemu-img info' when you're trying
to figure out which encryption options you have to use to open the
image successfully.
Fixes: 42e4ac9ef5 ("block/rbd: Add support for rbd image encryption")
Buglink: https://issues.redhat.com/browse/RHEL-105440
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250811134010.81787-1-kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The docs generated for qapi/accelerator.json shows text "=
Accelerators" instead of a heading. This is because the patch that
added the heading crossed with the commit that changed heading
markup (commit 6c10778826 "docs/sphinx: remove special parsing for
freeform sections"). Fix the markup.
Fixes: 18da42ee42 (qapi/accel: Move definitions related to accelerators in their own file)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250724091742.1950167-2-armbru@redhat.com>
We recently (merge commit 504632dcc6) enclosed command and type
names in `backquotes`, so they become links in generated HTML. Take
care of a few we missed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250717115751.3832597-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Using qom-list and qom-get to get all the nodes and property values in
a QOM tree can take multiple seconds because it requires 1000's of
individual QOM requests. Some managers fetch the entire tree or a
large subset of it when starting a new VM, and this cost is a
substantial fraction of start up time.
Define the qom-list-get command, which fetches all the properties and
values for a list of paths. This can be much faster than qom-list
plus qom-get. When getting an entire QOM tree, I measured a 10x
speedup in elapsed time.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <1752248703-217318-2-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Unstable QMP 'x-accel-stats' dispatches to the
AccelOpsClass::get_stats() and get_vcpu_stats() handlers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20250715140048.84942-4-philmd@linaro.org>
Knowing the QOM type name of a CPU can be useful,
in particular to infer its model name.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20250715090624.52377-2-philmd@linaro.org>
Allow user to set a preferred scale (defaulting to 1) of the virtual
display. Along with zoom-to-fix=false, this would be helpful for users
running QEMU on hi-dpi host desktop to achieve pixel to pixel display --
e.g., if the scale factor of a user's host desktop is set to 200%, then
they can set a 0.5 scale for the virtual display to avoid magnification
that might cause blurriness.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20250601045245.36778-3-weifeng.liu.z@gmail.com>
When aspect ratio of host window and that of guest display are not
aligned, we can either zoom the guest content to fill the whole host
window or add padding to respect aspect ratio of the guest. Add an
option keep-aspect-ratio to allow users to select their preferred
behavior in this case.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Suggested-by: Kim, Dongwon <dongwon.kim@intel.com>
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20250601045245.36778-2-weifeng.liu.z@gmail.com>
Thanks to 72d277a7, 1ed2cb32, and others, EDID (Extended Display
Identification Data) is propagated by QEMU such that a virtual display
presents legitimate metadata (e.g., name, serial number, preferred
resolutions, etc.) to its connected guest.
This change adds the ability to specify the EDID name for a particular
virtio-vga display. Previously, every virtual display would have the same
name: "QEMU Monitor". Now, we can inject names of displays in order to test
guest behavior that is specific to display names. We provide the ability to
inject the display name from the frontend since this is guest visible
data. Furthermore, this makes it clear where N potential display outputs
would get their name from (which will be added in a future change).
Note that we have elected to use a struct here for output data for
extensibility - we intend to add per-output fields like resolution in a
future change.
It should be noted that EDID names longer than 12 bytes will be truncated
per spec (I think?).
Testing: verified that when I specified 2 outputs for a virtio-gpu with
edid_name set, the names matched those that I configured with my vnc
display.
-display vnc=localhost:0,id=aaa,display=vga,head=0 \
-display vnc=localhost:1,id=bbb,display=vga,head=1 \
-device '{"driver":"virtio-vga",
"max_outputs":2,
"id":"vga",
"outputs":[
{
"name":"AAA"
},
{
"name":"BBB"
}
]}'
Signed-off-by: Andrew Keesler <ankeesler@google.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20250709121126.2946088-2-ankeesler@google.com>
Extend 'inhibit=on' setting with the option to specify a pinned XSK map
path along with a starting index (default 0) to push the created XSK
sockets into. Example usage:
# ./build/qemu-system-x86_64 [...] \
-netdev af-xdp,ifname=enp2s0f0np0,id=net0,mode=native,queues=2,start-queue=14,inhibit=on,map-path=/sys/fs/bpf/xsks_map,map-start-index=14 \
-device virtio-net-pci,netdev=net0 [...]
This is useful for the case where an existing XDP program with XSK map
is present on the AF_XDP supported phys device and the XSK map is not
yet populated. For example, the former could have been pre-loaded onto
the netdevice by a control plane, which later launches QEMU to populate
it with XSK sockets.
Normally, the main idea behind 'inhibit=on' is that the QEMU instance
doesn't need to have a lot of privileges to use the pre-loaded program
and the pre-created sockets, but this mentioned use-case here is different
where QEMU still needs privileges to create the sockets.
The 'map-start-index' parameter is optional and defaults to 0. It allows
flexible placement of the XSK sockets, and is up to the user to specify
when the XDP program with XSK map was already preloaded. In the simplest
case the queue-to-map-slot mapping is just 1:1 based on ctx->rx_queue_index
but the user might as well have a different scheme (or smaller map size,
e.g. ctx->rx_queue_index % max_size) to push the inbound traffic to one
of the XSK sockets.
Note that the bpf_xdp_query_id() is now only tested for 'inhibit=off'
since only in the latter case the libxdp takes care of installing the
XDP program which was installed based on the s->xdp_flags pointing to
either driver or skb mode. For 'inhibit=on' we don't make any assumptions
and neither go down the path of probing all possible options in which
way the user installed the XDP program.
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since commit 15489c769b ("block: auto-generated node-names"), if the
node name of a block driver state is not explicitly specified, it
will be auto-generated.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20250702123204.325470-3-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In combination with using a throttle filter to enforce IO limits for
a guest device, knowing the 'file' child of a block device can be
useful. If the throttle filter is only intended for guest IO, block
jobs should not also be limited by the throttle filter, so the
block operations need to be done with the 'file' child of the top
throttle node as the target. In combination with mirroring, the name
of that child is not fixed.
Another scenario is when unplugging a guest device after mirroring
below a top throttle node, where the mirror target is added explicitly
via blockdev-add. After mirroring, the target becomes the new 'file'
child of the throttle node. For unplugging, both the top throttle node
and the mirror target need to be deleted, because only implicitly
added child nodes are deleted automatically, and the current 'file'
child of the throttle node was explicitly added (as the mirror
target).
In other scenarios, it could be useful to follow the backing chain.
Note that iotests 191 and 273 use _filter_img_info, so the 'children'
information is filtered out there.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20250702123204.325470-2-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These modules don't have specific maintainers, so they're lumped in
together here as miscellaneous.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-19-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-16-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20250711054005.60969-15-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-13-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Note that a reference to MIGRATION needs to be disambiguated with a
:qapi:event: prefix. Without this, Sphinx complains
more than one target found for 'any' cross-reference 'MIGRATION': could be :std:ref:`Migration framework` or :qapi:event:`QMP:migration.MIGRATION`
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message amended to explain need for :qapi:event:]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Accidental line rewrap and an unwanted cross-refence dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-3-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250711054005.60969-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Richard Henderson
Markus Armbruster
Juraj Marcin
Peter Xu
Kevin Wolf
Vladimir Sementsov-Ogievskiy
Gerd Hoffmann
Shalini Chellathurai Saroja
Paolo Bonzini
Praveen K Paladugu
Viktor Kurilko
Mauro Carvalho Chehab
Paolo Abeni
Steve Sistare
Philippe Mathieu-Daudé
Weifeng Liu
Andrew Keesler
Daniel Borkmann
Fiona Ebner
John Snow