qstring_from_substr() takes the index of the substring's first and
last character. qstring_from_substr(s, 0, SIZE_MAX) denotes an empty
substring. Awkward.
Shift the end index one to the right. This simplifies both
qstring_from_substr() and its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180727062204.10401-3-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180727062204.10401-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qstring_from_substr() parameters @start and @end are of type int.
blkdebug_parse_filename(), blkverify_parse_filename(), nbd_parse_uri(),
and qstring_from_str() pass @end values of type size_t or ptrdiff_t.
Values exceeding INT_MAX get truncated, with possibly disastrous
results.
Such huge substrings seem unlikely, but we found one in a core dump,
where "info tlb" executed via QMP's human-monitor-command apparently
produced 35 GiB of output.
Fix by changing the parameters size_t.
Signed-off-by: liujunjie <liujunjie23@huawei.com>
Message-Id: <20180724134339.17832-1-liujunjie23@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When gnutls negotiates TLS 1.3 instead of 1.2, the order of messages
sent by the handshake changes. This exposed a logic bug in the test
suite which caused us to wait for the server to see handshake
completion, but not wait for the client to see completion. The result
was the client didn't receive the certificate for verification and the
test failed.
This is exposed in Fedora 29 rawhide which has just enabled TLS 1.3 in
its GNUTLS builds.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most of the TLS related tests are passing an in a "Error" object to
methods that are expected to fail, but then ignoring any error that is
set and instead asserting on a return value. This means that when an
error is unexpectedly raised, no information about it is printed out,
making failures hard to diagnose. Changing these tests to pass in
&error_abort will make unexpected failures print messages to stderr.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The test-vmstate test is a bit chatty because it triggers various
expected failure scenarios and the code in question uses error_report
instead of accepting 'Error **errp' parameters. To silence this test the
stubs for error_vprintf() were changed to send errors via
g_test_message() instead of stderr:
commit 28017e010d
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Mon Oct 24 18:31:03 2016 +0200
tests: send error_report to test log
Implement error_vprintf to send the output of error_report to
the test log. This silences test-vmstate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477326663-67817-3-git-send-email-pbonzini@redhat.com>
Unfortunately this change has global impact across the entire test suite
and means that when tests fail for unexpected reasons, the message is
not displayed on stderr. eg when using &error_abort in a call the test
merely prints
Unexpected error in qcrypto_tls_session_check_certificate() at crypto/tlssession.c:280:
and the actual error message is hidden, making it impossible to diagnose
the failure. This is especially problematic in CI or build systems where
it isn't possible to easily pass the --debug-log flag to tests and
re-run with the test log visible.
This change makes the previous big hammer much more nuanced, providing a
flag in the stub error_vprintf() that can used on a per-test basis to
silence the errors. Only the test-vmstate silences errors initially.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Calling qcrypto_init ensures that all relevant initialization is
done. In particular this honours the debugging settings and thread
settings.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
migrate_fd_connect duplicate initialize expected_downtime and cleanup_bh.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Message-Id: <1532434585-14732-2-git-send-email-lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The only possible change of last_byte is when it reaches the edge.
Setting it every time might let last_byte contain an invalid data when
memory corruption is detected, then the check of the next byte will be
incorrect. For example, a single page corruption at address 0x14ad000
will also lead to a "fake" corruption at 0x14ae000:
Memory content inconsistency at 14ad000 first_byte = 44 last_byte = 44 current = ef hit_edge = 0
Memory content inconsistency at 14ae000 first_byte = 44 last_byte = ef current = 44 hit_edge = 0
After the patch, it'll only report the corrputed page:
Memory content inconsistency at 14ad000 first_byte = 44 last_byte = 44 current = ef hit_edge = 0
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180723123305.24792-4-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Postcopy recovery won't work well with release-ram capability since
release-ram will drop the page buffer as long as the page is put into
the send buffer. So if there is a network failure happened, any page
buffers that have not yet reached the destination VM but have already
been sent from the source VM will be lost forever. Let's refuse the
client from resuming such a postcopy migration. Luckily release-ram was
designed to only be used when src and destination VMs are on the same
host, so it should be fine.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180723123305.24792-3-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We shouldn't update the received bitmap if we're the source VM. This
fixes a breakage when release-ram is enabled on postcopy.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180723123305.24792-2-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix outgoing migration which was crashing in
vmstate_hda_audio_stream_buf_needed, I think the problem
is that we have room for upto 4 streams in the array but only
use 2, when we come to try and save the state of the unused
streams we hit st->state == NULL.
Fixes: 280c1e1cdb
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180724102215.31866-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We've been getting the warning:
migration_iteration_finish: Unknown ending state 2
on a cancel.
I think that's originally due to 39b9e17905c; although
I've only seen the warning, I think that in some cases
that we could find the VM stays paused after a cancel where
it should restart.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180719092257.12703-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
I would guess it won't happen normally, but this should ease Coverity.
>>> CID 1394385: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
>>> Potentially overflowing expression "pages->used * 8192U" with type "unsigned int" (32 bits, unsigned) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type "uint64_t" (64 bits, unsigned).
854 transferred = pages->used * TARGET_PAGE_SIZE + p->packet_len;
Fixes: CID 1394385
CC: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180720034713.11711-1-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In ed6e2161 ("linux-aio: properly bubble up errors from initialzation"),
I only added a bdrv_attach_aio_context callback for the bdrv_file
driver. There are several other drivers that use the shared
aio_plug callback, though, and they will trip the assertion added to
aio_get_linux_aio because they did not call aio_setup_linux_aio first.
Add the appropriate callback definition to the affected driver
definitions.
Fixes: ed6e2161 ("linux-aio: properly bubble up errors from initialization")
Reported-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Nishanth Aravamudan <naravamudan@digitalocean.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180718211256.29774-1-naravamudan@digitalocean.com
Cc: Eric Blake <eblake@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- graceful handling of testing under cross-compile
- fixes for debootstrap handling
- more helpful errors (binfmt_misc/EXECUTABLE missing)
- drop runcom TCG test
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAltXBAAACgkQ+9DbCVqe
KkSSRwf/aUJM/4bE/PFFSTWiU9l3YsNP+7qgkuk8xiFq/IbXSbjjcYormBajBpZC
ProwvuT2uaDGdSqJhFONG83QzW3LjAj6w7RdguKr2aramo1bQnOX9mMuQs8cW4Y1
kgwO2p+yC6IEhBIVvWeNGXiEpozcBZwa0YtQ6NKpU89XvAd/YG+jr0dUDN+M/80m
9VamFTQqDYLKEKSAnAQqbjElES5Z2G3l16Qet5fqvIZGzqy+vjc7Xb63nZWP4Twl
Y9yvK32qe7ZoR+138pxP94oBjEjkMoBJUP2NgWuRGD3mFwT12U3pwPvvMflfvmLT
+q6YYppiQUy4uakgS0qU7UxayjWhOg==
=kK8N
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-docker-fixes-for-3.0-240718-1' into staging
docker fixes & tcg test tweak
- graceful handling of testing under cross-compile
- fixes for debootstrap handling
- more helpful errors (binfmt_misc/EXECUTABLE missing)
- drop runcom TCG test
# gpg: Signature made Tue 24 Jul 2018 11:48:32 BST
# gpg: using RSA key FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-docker-fixes-for-3.0-240718-1:
tests/tcg: remove runcom test
docker: perform basic binfmt_misc validation in docker.py
docker: ignore distro versioning of debootstrap
docker: add commentary to debian-bootstrap.docker
docker: Update debootstrap script after Debian migration from Alioth to Salsa
docker: report hint when docker.py check fails
docker: drop QEMU_TARGET check, fallback in EXECUTABLE not set
docker: add expansion for docker-test-FOO to Makefile.include
docker: add test-unit runner
docker: Makefile.include don't include partial images
docker: gracefully skip check_qemu
docker: move make check into check_qemu helper
docker: split configure_qemu from build_qemu
docker: fail more gracefully on docker.py check
docker: par down QEMU_CONFIGURE_OPTS in debian-tricore-cross
docker: base debian-tricore on qemu:debian9
tests/.gitignore: don't ignore docker tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The combination of being rather esoteric and needing to support mmap @
0 means this only ever worked under translation. It has now regressed
even further and is no longer useful. Kill it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Setting up binfmt_misc is outside of the scope of the docker.py script
but we can at least validate it with any given executable so we have a
more useful error message than the sed line of deboostrap failing
cryptically.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
We do a minimum version check for the debootstrap but if the distro
has added their own minor version tick it would fail and fall-back to
the SCM version. This is sub-optimal as the latest/greatest version
may be broken at any one particular time. We fix that with a little
sed magic on the version string before passing to our ugly shell
versioning check.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is just a note that later versions of debootstrap don't
technically need this hack.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When a check fails we currently just report why we failed. This is not
totally helpful to people who want to boot-strap a new image. Report a
hint as to why it failed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Fam Zheng <famz@redhat.com>
The addition of QEMU_TARGET was intended to ensure we fall back to
checking for the existence of an image if the build system was not
currently configured to build it. However this breaks the direct use
of the rule for building custom binfmt_misc images. We already check
for EXECUTABLE so let us just use that as a proxy for deciding if we
are just going to check the image exits.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows us to run a particular test on all docker images. For
example:
make docker-test-unit
Will run the unit tests on every supported image. At the same time
rename docker-test to docker-all-tests to be clearer.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This test doesn't even build QEMU, it just builds and runs all the
unit tests. Intended to make checking unit tests on all docker images
easier.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Rename DOCKER_INTERMEDIATE_IMAGES to DOCKER_PARTIAL_IMAGES and add the
incomplete cross compiler images that can build tests but can't build
QEMU itself. We also add debian, debian-bootstrap and the tricode
images to the list.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Not all our images are able to run the tests. Rather than use features
we can just check for the existence and run-ability of gtester. If the
image has been setup for binfmt_misc it will be able to run anyway.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Not all docker images can run the check step. Let's move everything
into a common helper so we don't need to replicate checks in the
future.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows some tests that just want to configure QEMU's source tree
to do so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As this is called directly from the Makefile while determining
dependencies and it is possible the user was configured in one window
but not have credentials in the other. Let's catch the Exceptions and
deal with it quietly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This image isn't going to build anything significant as it is just
intended for building test cases. In case it does end up getting
inadvertently included in a build lets aim for the minimal possible
product.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We need both git and a working compiler to build the tools. Although
the qemu:debian9 image also has a bunch of extra dependencies it would
be fairly unusual for a user not to already have this layer available
for one of our many other docker images so lets not complicate things.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The .gitignore was being a little over enthusiastic hiding files.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When we escalate a v8M exception to HardFault, if AIRCR.BFHFNMINNS is
set then we need to decide whether it should become a secure HardFault
or a nonsecure HardFault. We should always escalate to the same
target security state as the original exception. The current code
tries to test this using the 'secure' bool, which is not right because
that flag indicates whether the target security state only for
banked exceptions; the effect was that we were incorrectly escalating
always-secure exceptions like SecureFault to a nonsecure HardFault.
Fix this by defining, logging and using a new 'targets_secure' bool
which tracks the condition we actually want.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180723123457.2038-1-peter.maydell@linaro.org
In icc_dir_write() we were incorrectly checking HCR_EL2.FMO
when determining whether IRQ should be routed to EL2; this should
be HCR_EL2.IMO (compare the GICv3 pseudocode ICC_DIR_EL1[]).
Use the correct mask.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180723180337.17378-1-peter.maydell@linaro.org
When the user pushes Command-F in QEMU while the mouse is ungrabbed, QEMU
goes into full screen mode. When the user finally releases the command key,
it is sent to the guest as an event. The makes the guest operating system
think the command key is down when it is really up. To prevent this situation
from happening, we simply drop the first command key event after the user has
gone into full screen mode using Command-F.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20180703020017.1032-1-programmingkidx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
json_parser_parse_err() may return something else than a QDict, in
which case we loose the object. Let's keep track of the original
object to avoid leaks.
When an error occurs, "qdict" contains the response, but we still
check the "execute" key there. Untangle a bit this code, by having a
clear error path.
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The defrag.exe tool which is used for executing the fstrim command
on Windows doesn't support retrim for OSes lower than Win8. This
commit handles this case and returns a suitable error.
Output of fstrim before this commit:
{"execute":"guest-fstrim"}
{"return": {"paths": [{"path": "C:\\", "error": "An invalid command line option
was specified. (0x89000008)"}, {"path": "F:\\", "error": "An invalid command
line option was specified. (0x89000008)"}, {"path": "S:\\", "error": "An
invalid command line option was specified. (0x89000008)"}]}}
Reported on:
https://bugzilla.redhat.com/show_bug.cgi?id=1594113
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
* use alternative version query code proposed by Sameeh
* fix up version check logic
* avoid CamelCase variable names when possible
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When host vector registers and operations were introduced, I failed
to mark the registers call clobbered as required by the ABI.
Fixes: 770c2fc7bb
Cc: qemu-stable@nongnu.org
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename DCACHE to DATA_CACHE and ICACHE to INSTRUCTION_CACHE.
This avoids conflict with Linux asm/cachectl.h macros and fixes
build failure on mips hosts.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180717194010.30096-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's annoying to see this debug message every time you use vvfat.
Disable it with the DLOG() macro by default, as it is done with the
other debug messages in this file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster
liujunjie
Peter Maydell
Daniel P. Berrangé
Lidong Chen
Peter Xu
Dr. David Alan Gilbert
Nishanth Aravamudan
Alex Bennée
Philippe Mathieu-Daudé
John Arbuckle
Marc-André Lureau
Sameeh Jubran
Richard Henderson
Eduardo Habkost
Thomas Huth