Since Linux doesn't have a user API to issue zone append operations to
zoned devices from user space, the file-posix driver is modified to add
zone append emulation using regular writes. To do this, the file-posix
driver tracks the wp location of all zones of the device. It uses an
array of uint64_t. The most significant bit of each wp location indicates
if the zone type is conventional zones.
The zones wp can be changed due to the following operations issued:
- zone reset: change the wp to the start offset of that zone
- zone finish: change to the end location of that zone
- write to a zone
- zone append
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051510.177850-2-faithilikerun@gmail.com
[Fix errno propagation from handle_aiocb_zone_mgmt()
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the documentation about the zoned device support to virtio-blk
emulation.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-9-faithilikerun@gmail.com
Message-id: 20230324090605.28361-9-faithilikerun@gmail.com
[Add index-api.rst to fix "zoned-storage.rst:document isn't included in
any toctree" error and fix pre-formatted code syntax.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-8-faithilikerun@gmail.com
Message-id: 20230324090605.28361-8-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new block layer APIs of zoned block devices can be tested by:
$ tests/qemu-iotests/check zoned
Run each zone operation on a newly created null_blk device
and see whether it outputs the same zone information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-7-faithilikerun@gmail.com
Message-id: 20230324090605.28361-7-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Putting zoned/non-zoned BlockDrivers on top of each other is not
allowed.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-6-faithilikerun@gmail.com
Message-id: 20230324090605.28361-6-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and clarify that the check is about zoned
BlockDrivers.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
raw-format driver usually sits on top of file-posix driver. It needs to
pass through requests of zone commands.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-5-faithilikerun@gmail.com
Message-id: 20230324090605.28361-5-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add zoned device option to host_device BlockDriver. It will be presented only
for zoned host block devices. By adding zone management operations to the
host_block_device BlockDriver, users can use the new block layer APIs
including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).
Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).
For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-4-faithilikerun@gmail.com
Message-id: 20230324090605.28361-4-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and remove spurious ret = -errno in
raw_co_zone_mgmt().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use get_sysfs_str_val() to get the string value of device
zoned model. Then get_sysfs_zoned_model() can convert it to
BlockZoneModel type of QEMU.
Use get_sysfs_long_val() to get the long value of zoned device
information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-3-faithilikerun@gmail.com
Message-id: 20230324090605.28361-3-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-2-faithilikerun@gmail.com
Message-id: 20230324090605.28361-2-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A few fixes and updates to bring OpenRISC inline with the latest
architecture spec updates:
- Allow FPCSR to be accessed in user mode
- Select tininess detection before rounding
- Fix FPE Exception PC value
-----BEGIN PGP SIGNATURE-----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=zqbX
-----END PGP SIGNATURE-----
Merge tag 'or1k-pull-request-20230513' of https://github.com/stffrdhrn/qemu into staging
OpenRISC FPU Updates for 8.1
A few fixes and updates to bring OpenRISC inline with the latest
architecture spec updates:
- Allow FPCSR to be accessed in user mode
- Select tininess detection before rounding
- Fix FPE Exception PC value
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmRfPIEACgkQw7McLV5m
# J+RFuhAAt4xxci52fxvPpgUu/mjKU6mbYNjBEPEh+OAcb+m/BrvKhazZDACkyLMe
# ehavWtI856jfy6DsIA5wj5+zhgV8W5DR6a1mHIhmSAoVq7e+NnC5y0GJC9B0Xd/2
# FNOq/LZPtv/w7u+D1pFJaTb07hAaFVIC05Arn4dXa1k3yBuyjqIJnlrXa3Jt0pLW
# To/z1zch1rUp6RhFmGxU+8/qvTbzqkm/F3kbe8l2z34371lTd6KhPwvKaImMpTYQ
# dvULTMXjZ6Dp8BmUrDcnLMTL3NbYcPrI+qOHX1X+dwzNFyui2I8Ci7IfEKJ460ja
# Fe2Ku/aDfHSZYYayWaYSlrrZ1AH0fLLwIkHSs95+xUMsl81mtS6lIysj7fAFRnM5
# 7tU4ov1T/leupvvUCUX5N4Yje/yvbuoAqGyhjDHzJ98vIe6fDhutU4Bm8/30q6Dy
# nKnfSgRHrrTrH042xW32DJnzaN2pEWrNtOMaegLMaqZ60app2YDaKJvtHLua1VjD
# b+g+X/+xBNb34k5e/f4z+GeGPoqE2wvwMcSkD+NBE8je3idPdMS/u5lQrvqvcbI/
# DJBRoPifNME/oYoTxPVKRnrCQIWQ6YkeLWVmqMfCVpjCF97gexo+UBUawJimTXFr
# gmcIYxv87oKF4KbCn7LsLlXGSpWSihKSBTHDxFPaKiRbnYZ5ais=
# =zqbX
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 13 May 2023 08:30:09 AM BST
# gpg: using RSA key D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* tag 'or1k-pull-request-20230513' of https://github.com/stffrdhrn/qemu:
target/openrisc: Setup FPU for detecting tininess before rounding
target/openrisc: Set PC to cpu state on FPU exception
target/openrisc: Allow fpcsr access in user mode
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In check_s2_mmu_setup() we have a check that is attempting to
implement the part of AArch64.S2MinTxSZ that is specific to when EL1
is AArch32:
if !s1aarch64 then
// EL1 is AArch32
min_txsz = Min(min_txsz, 24);
Unfortunately we got this wrong in two ways:
(1) The minimum txsz corresponds to a maximum inputsize, but we got
the sense of the comparison wrong and were faulting for all
inputsizes less than 40 bits
(2) We try to implement this as an extra check that happens after
we've done the same txsz checks we would do for an AArch64 EL1, but
in fact the pseudocode is *loosening* the requirements, so that txsz
values that would fault for an AArch64 EL1 do not fault for AArch32
EL1, because it does Min(old_min, 24), not Max(old_min, 24).
You can see this also in the text of the Arm ARM in table D8-8, which
shows that where the implemented PA size is less than 40 bits an
AArch32 EL1 is still OK with a configured stage2 T0SZ for a 40 bit
IPA, whereas if EL1 is AArch64 then the T0SZ must be big enough to
constrain the IPA to the implemented PA size.
Because of part (2), we can't do this as a separate check, but
have to integrate it into aa64_va_parameters(). Add a new argument
to that function to indicate that EL1 is 32-bit. All the existing
callsites except the one in get_phys_addr_lpae() can pass 'false',
because they are either doing a lookup for a stage 1 regime or
else they don't care about the tsz/tsz_oob fields.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1627
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230509092059.3176487-1-peter.maydell@linaro.org
On a build configured with: --disable-tcg --enable-xen it is possible
to produce a QEMU binary with no TCG nor KVM support. Skip the cdrom
boot tests if that's the case.
Fixes: 0c1ae3ff9d ("tests/qtest: Fix tests when no KVM or TCG are present")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230508181611.2621-4-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We cannot allow this config to be disabled at the moment as not all of
the relevant code is protected by it.
Commit 29d9efca16 ("arm/Kconfig: Do not build TCG-only boards on a
KVM-only build") moved the CONFIGs of several boards to Kconfig, so it
is now possible that nothing selects ARM_V7M (e.g. when doing a
--without-default-devices build).
Return the CONFIG_ARM_V7M entry to a state where it is always selected
whenever TCG is available.
Fixes: 29d9efca16 ("arm/Kconfig: Do not build TCG-only boards on a KVM-only build")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230508181611.2621-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Semihosting has been made a 'default y' entry in Kconfig, which does
not work because when building --without-default-devices, the
semihosting code would not be available.
Make semihosting unconditional when TCG is present.
Fixes: 29d9efca16 ("arm/Kconfig: Do not build TCG-only boards on a KVM-only build")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230508181611.2621-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity points out (in CID 1508390) that write_bootloader has
some dead code, where we assign to 'p' and then in the following
line assign to it again. This happened as a result of the
refactoring in commit cd5066f861.
Fix the dead code by removing the 'void *v' variable entirely and
instead adding a cast when calling bl_setup_gt64120_jump_kernel(), as
we do at its other callsite in write_bootloader_nanomips().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In the doc sources, we have a few cross-reference targets with odd
names "pcsys_005fxyz". These are the legacy of the semi-automated
conversion of the old info docs to rST (the '005f' is because ASCII
0x5f is '_' and the old info link names had underscores in them).
Remove the targets which nothing links to, and rename the two targets
which are used to something a bit more descriptive.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230421163642.1151904-1-peter.maydell@linaro.org
Reviewed-by: Markus Armbruster <armbru@redhat.com>
When we take a PNG screenshot the ordering of the colour channels in
the data is not correct, resulting in the image having weird
colouring compared to the actual display. (Specifically, on a
little-endian host the blue and red channels are swapped; on
big-endian everything is wrong.)
This happens because the pixman idea of the pixel data and the libpng
idea differ. PIXMAN_a8r8g8b8 defines that pixels are 32-bit values,
with A in bits 24-31, R in bits 16-23, G in bits 8-15 and B in bits
0-7. This means that on little-endian systems the bytes in memory
are
B G R A
and on big-endian systems they are
A R G B
libpng, on the other hand, thinks of pixels as being a series of
values for each channel, so its format PNG_COLOR_TYPE_RGB_ALPHA
always wants bytes in the order
R G B A
This isn't the same as the pixman order for either big or little
endian hosts.
The alpha channel is also unnecessary bulk in the output PNG file,
because there is no alpha information in a screenshot.
To handle the endianness issue, we already define in ui/qemu-pixman.h
various PIXMAN_BE_* and PIXMAN_LE_* values that give consistent
byte-order pixel channel formats. So we can use PIXMAN_BE_r8g8b8 and
PNG_COLOR_TYPE_RGB, which both have an in-memory byte order of
R G B
and 3 bytes per pixel.
(PPM format screenshots get this right; they already use the
PIXMAN_BE_r8g8b8 format.)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1622
Fixes: 9a0a119a38 ("Added parameter to take screenshot with screendump as PNG")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230502135548.2451309-1-peter.maydell@linaro.org
I am now employed by Daynix. Although my role as a reviewer of
macOS-related change is not very relevant to the employment, I decided
to use the company email address to avoid confusions from different
addresses.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20230506072333.32510-1-akihiko.odaki@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently don't correctly handle the VSTCR_EL2.SW and VTCR_EL2.NSW
configuration bits. These allow configuration of whether the stage 2
page table walks for Secure IPA and NonSecure IPA should do their
descriptor reads from Secure or NonSecure physical addresses. (This
is separate from how the translation table base address and other
parameters are set: an NS IPA always uses VTTBR_EL2 and VTCR_EL2
for its base address and walk parameters, regardless of the NSW bit,
and similarly for Secure.)
Provide a new function ptw_idx_for_stage_2() which returns the
MMU index to use for descriptor reads, and use it to set up
the .in_ptw_idx wherever we call get_phys_addr_lpae().
For a stage 2 walk, wherever we call get_phys_addr_lpae():
* .in_ptw_idx should be ptw_idx_for_stage_2() of the .in_mmu_idx
* .in_secure should be true if .in_mmu_idx is Stage2_S
This allows us to correct S1_ptw_translate() so that it consistently
always sets its (out_secure, out_phys) to the result it gets from the
S2 walk (either by calling get_phys_addr_lpae() or by TLB lookup).
This makes better conceptual sense because the S2 walk should return
us an (address space, address) tuple, not an address that we then
randomly assign to S or NS.
Our previous handling of SW and NSW was broken, so guest code
trying to use these bits to put the s2 page tables in the "other"
address space wouldn't work correctly.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1600
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230504135425.2748672-3-peter.maydell@linaro.org
Bit 63 in a Table descriptor is only the NSTable bit for stage 1
translations; in stage 2 it is RES0. We were incorrectly looking at
it all the time.
This causes problems if:
* the stage 2 table descriptor was incorrectly setting the RES0 bit
* we are doing a stage 2 translation in Secure address space for
a NonSecure stage 1 regime -- in this case we would incorrectly
do an immediate downgrade to NonSecure
A bug elsewhere in the code currently prevents us from getting
to the second situation, but when we fix that it will be possible.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230504135425.2748672-2-peter.maydell@linaro.org
While we cannot move the main "helper.h" out of target/arm/,
due to usage by generic code, we can move the sub-includes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230504110412.1892411-3-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These files got missed when populating tcg/.
Because they are included with "", no change to the users required.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230504110412.1892411-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OpenRISC defines tininess to be detected before rounding. Setup qemu to
obey this.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Store the PC to ensure the correct value can be read in the exception
handler.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
As per OpenRISC spec 1.4 FPCSR can be read and written in user mode.
Update mtspr and mfspr helpers to support this by moving the is_user
check into the helper.
Link: https://raw.githubusercontent.com/openrisc/doc/master/openrisc-arch-1.4-rev0.pdf
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This header is supposed to be private to tcg and in fact
does not need to be included here at all.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, use
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, pull out
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of playing with offsetof in various places, use
MMUAccessType to index an array. This is easily defined
instead of the previous dummy padding array in the union.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Like cpu_in_exclusive_context, but also true if
there is no other cpu against which we could race.
Use it in tb_flush as a direct replacement.
Use it in cpu_loop_exit_atomic to ensure that there
is no loop against cpu_exec_step_atomic.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses have now been expunged.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mark all memory operations that are not already marked with UNALIGN.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In gen_ldx/gen_stx, the only two locations for memory operations,
mark the operation as either aligned (softmmu) or unaligned
(user-only, as if emulated by the kernel).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The opposite of MO_UNALN is MO_ALIGN.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Memory operations that are not already aligned, or otherwise
marked up, require addition of ctx->default_tcg_memop_mask.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adjust the softmmu tlb to use R0+R1, not any of the normally available
registers. Since we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than zero-extend the guest address into a register,
use an add instruction which zero-extends the second input.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_TMP[0-2], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Never used since its introduction.
Fixes: 3d582c6179 ("tcg-ppc64: Rearrange integer constant constraints")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These constraints have not been used for quite some time.
Fixes: 77b73de676 ("Use rem/div[u]_i32 drop div[u]2_i32")
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_{TMP1,TMP2,R0}, not any of the normally
available registers. Now that we handle overlap betwen inputs and
helper arguments, we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allocate TCG_REG_TMP2. Use R0, TMP1, TMP2 instead of any of
the normally allocated registers for the tlb load.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_TMP[0-3], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
and have eliminated use of A0, we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compare the address vs the tlb entry with sign-extended values.
This simplifies the page+alignment mask constant, and the
generation of the last byte address for the misaligned test.
Move the tlb addend load up, and the zero-extension down.
This frees up a register, which allows us use TMP3 as the returned base
address register instead of A0, which we were using as a 5th temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While performing the load in the delay slot of the call to the common
bswap helper function is cute, it is not worth the added complexity.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Sam Li
Richard Henderson
Peter Maydell
Fabiano Rosas
Akihiko Odaki
Stafford Horne