Currently if the user's compiler works for creating .o files but
their linker is broken such that compiling an executable from a
C file does not work, we will report a misleading error message
about the compiler not supporting __thread (since that happens
to be the first test we run which requires a working linker).
Explicitly check that compile_prog works as well as compile_object,
so that people whose toolchain setup is broken get a more helpful
error message.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU uses threads / coroutines, therefore support for thread local storage
and thread safe libraries (-D_MT) must be enabled by using -mthreads.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Commit 7fe34ca9c2 actually disabled vhost-user-test altogether,
since CONFIG_VHOST_NET is a per-target config variable.
tests/vhost-user-test is already x86/x64 softmmu specific test, in order
to enable it correctly, kvm & vhost-net are also conditions. To check
that, set CONFIG_VHOST_NET_TEST_$target when kvm is also enabled.
Since "check-qtest-x86_64-y = $(check-qtest-i386-y)", avoid duplication
when both x86 & x64 are enabled.
Other targets than x86 aren't enabled yet, and is intentionally left as
a future improvement, since I can't easily test those.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop the libseccomp required version back to 2.1.0, restoring the ability
to build w/ --enable-seccomp on Ubuntu 14.04.
Commit 4cc47f8b3c tightened the dependency
on libseccomp from version 2.1.0 to 2.1.1. This broke building on Ubuntu
14.04, the current Ubuntu LTS release. The commit message didn't mention
any specific functional need for 2.1.1, just that it was the most recent
stable version at the time. I reviewed the changes between 2.1.0 and 2.1.1,
but it looks like that update just contained minor fixes and cleanups - no
obvious (to me) new interfaces or critical bug fixes.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
This is a revert of ae6e8ef11e, but with a bit of refactoring,
and also specifically adding arm/aarch64, rather than all
architectures. Currently, libseccomp code appears to also support
mips, ppc, and s390. We could therefore allow qemu to enable
seccomp for those platforms as well, with additional configure
patches, given they're tested and proven to work.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Due to the addition of HVMlite and the requirement to always provide a
valid xc_domain_configuration_t, xc_domain_create now always takes an arch
domain config, which can be NULL in order to mimic previous behaviour.
Add a small stub called xen_domain_create that encapsulates the correct
call to xc_domain_create depending on the libxc version detected.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
I broke this when adding checks for clang++.
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447345789-840-1-git-send-email-jsnow@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit b553a04280 inadvertently disabled optimization
for all non-fortify builds. Fix this bug so we only do an
unoptimized build if we want debug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1447082049-25099-1-git-send-email-peter.maydell@linaro.org
The '--enable-vnc-tls' option to configure was removed in
commit 3e305e4a47
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Aug 6 14:39:32 2015 +0100
ui: convert VNC server to use QCryptoTLSSession
This removes the corresponding help string.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to ./configure all options should have both --enable-foo and
--disable-foo:
# Always add --enable-foo and --disable-foo command line args.
# Distributions want to ensure that several features are compiled in, and it
# is impossible without a --enable-foo that exits if a feature is not found.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1446473183-24250-1-git-send-email-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some versions of clang may have difficulty compiling glibc headers when
-D_FORTIFY_SOURCE is used. For example, Clang++ 3.5.0-9.fc22 cannot
compile glibc's stdio headers when -D_FORTIFY_SOURCE=2 is used. This
manifests currently as build failures with clang and any arm target.
According to LLVM dev Richard Smith, clang does not target or support
FORTIFY_SOURCE + glibc, and it should not be relied on.
"It's still an unsupported combination, and while it might compile, some
of the checks are unlikely to work because they require a frontend
inliner to be useful"
See: http://lists.llvm.org/pipermail/cfe-dev/2015-November/045846.html
Conclusion: disable fortify-source if we appear to be using clang instead
of testing for compile success or failure, which may be incidental or not
indicative of proper support of the feature.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <1446583422-10153-1-git-send-email-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the user is using ccache during the configuration step,
it may interfere with some of the configuration tests,
particularly the "Is ccache interfering with macro analysis" step,
which is a bit of a poetic problem.
1) Disallow ccache from reading from the cache during configure,
but don't disable it entirely to allow us to see if it causes other
problems.
2) Force off CCACHE_CPP2 during the ccache test to get a deterministic
answer over whether or not we need to enable that feature later.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <1446055000-29150-1-git-send-email-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We now use epoxy to load opengl libraries. This means we don't need to
link opengl libraries directly if interfaces handled by epoxy. With
this, we just need epoxy headers and epoxy's *.so to build.
Tested with epoxy-1.3.1.
- sdl2/gtk/console egl stuff doesn't require other than epoxy
- milkymist-tmu2 glx stuff doesn't require other than epoxy
(lm32 test is limited, because can't find mmone-bios.bin, so just test
to load libGL with "./lm32-softmmu/qemu-system-lm32 -M milkymist,accel=qtest")
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
[ lm32 tested by kraxel ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When using ivshmem devices, notifications between guests can be sent as
interrupts using a ivshmem-server (typical use described in documentation).
The client is provided as a debug tool.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[fix a valgrind warning, option and server_close() segvs, extra server
headers includes, getopt() return type, out-of-tree build, use qemu
event_notifier instead of eventfd, fix x86/osx warnings - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The previous commit
commit 9a2fd4347c
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Apr 13 14:01:39 2015 +0100
crypto: add sanity checking of TLS x509 credentials
defined new variables $TEST_LIBS and $TEST_CFLAGS and
used them in tests/Makefile to augment $LIBS and $CFLAGS.
Unfortunately this overlooks the fact that tests/Makefile
is not executed via recursive-make, it is just pulled into
the top level Makefile via an include statement. So rather
than just augmenting the compiler/linker flags for tests
it polluted the global flags.
This is thought to be behind a reported failure when
building the pixman module as a sub-module, since global
$CFLAGS are passed down to configure in pixman.
This change removes the $TEST_LIBS and $TEST_CFLAGS
replacing them with $TASN1_LIBS and $TASN1_CFLAGS,
setting only against specific objects/executables
that need them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the choice of whether to use nettle or gcrypt is
made based on what gnutls is linked to. There are times
when it is desirable to be able to force build against a
specific library. For example, if testing changes to QEMU's
crypto code all 3 possible backends need to be checked
regardless of what the local gnutls uses.
It is also desirable to be able to enable nettle/gcrypt
for cipher/hash algorithms, without enabling gnutls
for TLS support.
This gives two new configure flags, which allow the
following possibilities
Automatically determine nettle vs gcrypt from what
gnutls links to (recommended to minimize number of
crypto libraries linked to)
./configure
Automatically determine nettle vs gcrypt based on
which is installed
./configure --disable-gnutls
Force use of nettle
./configure --enable-nettle
Force use of gcrypt
./configure --enable-gcrypt
Force use of built-in AES & crippled-DES
./configure --disable-nettle --disable-gcrypt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Check if memfd_create() is part of system libc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
Currently POSIX builds rely on 'qemu-ga' target to do qga-only
distributable build. On w32, as with most standalone binary targets,
we rely on 'qemu-ga.exe' target.
Unlike with POSIX, qemu-ga for w32 has a number of related targets
such as VSS DLL and MSI package. We can do the full distributable
qga-only build on w32 with:
make qemu-ga.exe
or:
make msi
To make that work, we tie VSS dependencies onto qemu-ga.exe.
However, in reality the DLL isn't part of the binary, so we use a
filter to pull them out of the LINK recipe, which attempts to link
against prereqs for binary targets. Additionally, it could be argued
that VSS is a separate distributable, and shouldn't be implied by
qemu-ga.exe binary target.
To avoid this, we can tie the VSS dependencies only to the 'msi'
target, but that would make it impossible to do a qga-only build of
the w32 distributable without building the 'msi' package, which was
supported in the past.
An alternative approach is to add a new target to build the whole
distributable. w32 allows us to use the same build target we use
on POSIX, 'qemu-ga', since the current binary-only target on w32
is 'qemu-ga.exe'.
To further simplify the build, we also make 'qemu-ga' build the MSI
package if the appropriate ./configure options are set, making the
full qga-only build the same on both POSIX and w32: `make qemu-ga`
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
RHEL-6 and SLES-11 provide Python 2.6. It'll also work on OS X back
to 10.6.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441396383-17304-1-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows virtio-gpu to render in 3d mode.
Uses native opengl support which is present
in gtk versions 3.16 and newer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add virglrenderer library detection. Add 3d mode to virtio-gpu,
wire up virglrenderer library. When in 3d mode render using the
new context management and texture scanout callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Let's expose some virtual/fake registers as virtualization specific
registers.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The oslib-win32 file currently provides a localtime_r and
gmtime_r replacement unconditionally. Some versions of
Mingw-w64 would provide crude macros for localtime_r/gmtime_r
which QEMU takes care to disable. Latest versions of Mingw-w64
now provide actual functions for localtime_r/gmtime_r, but
with a twist that you have to include unistd.h or pthread.h
before including time.h. By luck some files in QEMU have
such an include order, resulting in compile errors:
CC util/osdep.o
In file included from include/qemu-common.h:48:0,
from util/osdep.c:48:
include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
struct tm *gmtime_r(const time_t *timep, struct tm *result);
^
In file included from include/qemu-common.h:35:0,
from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here
In file included from include/qemu-common.h:48:0,
from util/osdep.c:48:
include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
struct tm *localtime_r(const time_t *timep, struct tm *result);
^
In file included from include/qemu-common.h:35:0,
from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here
This change adds a configure test to see if localtime_r
exits, and only enables the QEMU impl if missing. We also
re-arrange qemu-common.h try attempt to guarantee that all
source files get unistd.h before time.h and thus see the
localtime_r/gmtime_r defs.
[sw: Use "official" spellings for Mingw-w64, MinGW in comments.]
[sw: Terminate sentences with a dot in comments.]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
libcacard is now a standalone project hosted with the Spice project (see
the 2.5.0 release announcement), remove it from qemu tree.
Use the library if found during configure or if --enable-smartcard.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Add related configuration and make files for tilegx.
The target can now build, though not run anything.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP1588E5A03AD5E94B07E988B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Switch VNC server over to using the QCryptoTLSSession object
for the TLS session. This removes the direct use of gnutls
from the VNC server code. It also removes most knowledge
about TLS certificate handling from the VNC server code.
This has the nice effect that all the CONFIG_VNC_TLS
conditionals go away and the user gets an actual error
message when requesting TLS instead of it being silently
ignored.
With this change, the existing configuration options for
enabling TLS with -vnc are deprecated.
Old syntax for anon-DH credentials:
-vnc hostname:0,tls
New syntax:
-object tls-creds-anon,id=tls0,endpoint=server \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, no client certs:
-vnc hostname:0,tls,x509=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, requiring client certs:
-vnc hostname:0,tls,x509verify=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \
-vnc hostname:0,tls-creds=tls0
This aligns VNC with the way TLS credentials are to be
configured in the future for chardev, nbd and migration
backends. It also has the benefit that the same TLS
credentials can be shared across multiple VNC server
instances, if desired.
If someone uses the deprecated syntax, it will internally
result in the creation of a 'tls-creds' object with an ID
based on the VNC server ID. This allows backwards compat
with the CLI syntax, while still deleting all the original
TLS code from the VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.
This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.
It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.
Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In Xen 4.6 commit cd2f100f0f61b3f333d52d1737dd73f02daee592
"libxc: Fix do_memory_op to return negative value on errors"
made the libxc API less odd-ball: On errors, return value is
-1 and error code is in errno. On success the return value
is either 0 or an positive value.
Since we could be running with an old toolstack in which the
Exx value is in rc or the newer, we add an wrapper around
the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap)
which will always return the EXX.
Xen 4.6 did not change the libxc functions mentioned (same parameters)
so we piggyback on the fact that Xen 4.6 has a new function:
commit 504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose
new hypercall xc_reserved_device_memory_map" and check for that.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. The hypervisor side gets I/O req server creation
extended so we can indicate that we're using suitable atomic accesses
where needed, allowing it to atomically canonicalize both pointers when
both have gone through at least one cycle.
The Xen side counterpart (which is not a functional prereq to this
change, albeit a build one) went in already (commit b7007bc6f9).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking
to jemalloc memory allocator.
We have already tcmalloc support,
but it seem to not working well with a lot of iothreads/disks.
The main problem is that tcmalloc use a shared thread cache of 16MB
by default.
With more threads, this cache is shared, and some bad garbage collections
can occur if the cache is too low.
It's possible to tcmalloc cache increase it with a env var:
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB
With default 16MB, performances are really bad with more than 2 disks.
Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads.
Jemalloc don't have performance problem with default configuration.
Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32,
with rbd block backend (librbd is doing a lot of memory allocation),
1 iothread by disk
glibc malloc
------------
1 disk 29052
2 disks 55878
4 disks 127899
8 disks 240566
15 disks 269976
jemalloc
--------
1 disk 41278
2 disks 75781
4 disks 195351
8 disks 294241
15 disks 298199
tcmalloc 2.2.1 default 16M cache
--------------------------------
1 disk 37911
2 disks 67698
4 disks 41076
8 disks 43312
15 disks 37569
tcmalloc : 256M cache
---------------------------
1 disk 33914
2 disks 58839
4 disks 148205
8 disks 213298
15 disks 218383
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Every arch adds its disas configury to both its own config as well
config_disas_all. Make a small function do to both at once.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <1440844439-19391-1-git-send-email-crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's support reading and writing of control registers for kvm and tcg.
We have to take care of flushing the tlb (tcg) and pushing the changed
registers into kvm.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently VSS dll/tlb files for use in w32 builds are only built as a
result of having been added to the general 'tools' target alongside
qemu-ga. This is fine for default make target, but if we build
qemu-ga directly via `make qemu-ga.exe`, the VSS files are not
created.
Fix this by moving the VSS dependencies to qemu-ga.exe directly.
With this move we can move the VSS files back out of 'tools',
and drop the extra handling from MSI target in Makefile.
Now we can build qemu-ga MSI package with:
./configure ...
make qemu-ga.exe
make msi
or simply:
./configure ...
make msi
and no longer need to do a full build beforehand.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently, if we don't explicitly disable support for MSI installer
via --disable-guest-agent-msi, the configure variable that tracks
the flag, 'guest_agent_msi', never gets set unless one of the probes
fails. Subsequent code then treats this unset value the same as if it
were a "yes" value (via != "no" style checks).
Instead, set the default "yes" value explicitly after the probes, then
make subsequent code expect the values to be set.
This makes it easier to report on whether or not MSI support was
enabled via probe by looking at the ./configure summary.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
MSI probe assumes that qemu-ga support has been probed already, but in
cases where --enable-guest-agent/--disable-guest-agent have not been
passed to configure, qemu-ga support may end up getting enabled later,
as is the case with w32 builds. This leads to MSI probe prematurely
reporting error due to lack of qemu-ga support.
Fix this by moving MSI installer probe after the final qga probes.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Use NetUserSetInfo() to set the user password.
This function is notoriously known to be problematic for users with EFS
encrypted files. But the alternative, NetUserChangePassword() requires
the old password. Nevertheless, The EFS file should be recovered by
changing back to the old password.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently we need to examine config-host.mak to determine whether
options/probes for MSI package generation had desired result. Report
this more prominently in ./configure summary as we do with other
guest agent configure options.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.
Anyway, guest base use can be disabled lively by setting guest
base to 0.
CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The cocoa GUI frontend assumes it is the only GUI (it redefines
main() so it always gets control before the rest of QEMU), so
it does not play well with other UIs like SDL or GTK. (Mostly
people building QEMU on OSX don't have the necessary dependencies
available for configure to build those other front ends, so
mostly this problem goes unnoticed.)
Make configure automatically disable the SDL and GTK front ends
if the cocoa front end is enabled. (We were sort of attempting
to do this for SDL before, but not in a way that worked very well.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 1439565052-3457-1-git-send-email-peter.maydell@linaro.org
For unknown reasons (probably a git rebase merge mistake)
commit 2da776db48
Author: Michael R. Hines <mrhines@us.ibm.com>
Date: Mon Jul 22 10:01:54 2013 -0400
rdma: core logic
Adds CONFIG_RDMA to config-host.h twice, as can be seen
in the generated file:
$ grep CONFIG_RDMA config-host.h
#define CONFIG_RDMA 1
#define CONFIG_RDMA 1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1438345403-32467-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 8e9b0d2 (ui: convert VNC websockets to use crypto APIs) dropped
the --enable-vnc-ws option but forgot to update the help text. Fix this.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1437749257-3313-1-git-send-email-afaerber@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unfortunately Ubuntu's pkg-config information for gnutls is broken
for the static linking case, and outputs --libs options which the
compiler does not recognize. Work around this problem by testing
that the --cflags/--libs output will at least allow compilation
before enabling gnutls support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1437758888-22486-1-git-send-email-peter.maydell@linaro.org
In nettle 3, cbc_encrypt() accepts 'nettle_cipher_func' instead of
'nettle_crypt_func' and these two differ in 'const' qualifier of the
first argument. The build fails with:
In file included from crypto/cipher.c:71:0:
./crypto/cipher-nettle.c: In function ‘qcrypto_cipher_encrypt’:
./crypto/cipher-nettle.c:154:38: error: passing argument 2 of
‘nettle_cbc_encrypt’ from incompatible pointer type
cbc_encrypt(ctx->ctx_encrypt, ctx->alg_encrypt,
^
In file included from ./crypto/cipher-nettle.c:24:0,
from crypto/cipher.c:71:
/usr/include/nettle/cbc.h:48:1: note: expected
‘void (*)(const void *, size_t, uint8_t *, const uint8_t *)
but argument is of type
‘void (*)( void *, size_t, uint8_t *, const uint8_t *)
To allow both versions, we switch to the new definition and #if typedef
it for old versions.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1436548682-9315-2-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the direct use of gnutls for hash processing in the
websockets code, in favour of using the crypto APIs. This
allows the websockets code to be built unconditionally
removing countless conditional checks from the VNC code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-9-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Get rid of direct use of gnutls APIs in quorum blockdrv in
favour of using the crypto APIs. This avoids the need to
do conditional compilation of the quorum driver. It can
simply report an error at file open file instead if the
required hash algorithm isn't supported by QEMU.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-8-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we are linking to gnutls already and gnutls is built against
nettle, then we should use nettle as a cipher backend in
preference to our built-in backend.
This will be used when linking against some GNUTLS 2.x versions
and all GNUTLS 3.x versions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-7-git-send-email-berrange@redhat.com>
[Change "#elif" to "#elif defined". - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we are linking to gnutls already and gnutls is built against
gcrypt, then we should use gcrypt as a cipher backend in
preference to our built-in backend.
This will be used when linking against GNUTLS 1.x and many
GNUTLS 2.x versions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-6-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PCIAddress inforfation is obtained via SetupApi, which provides the
information about address, bus, etc. We look throught entire device tree
in the system and try to find device object for given volume. For this PDO
SetupDiGetDeviceRegistryProperty is called, which reads PCI configuration
for a given devicei if it is possible.
This is the most convinient way for a userspace service. The lookup is
performed for every volume available. However, this information is
not mandatory for vss-provider.
In order to use SetupApi we need to notify linker about it. We do not need
to install additional libs, so we do not make separate configuration
option to use libsetupapi.su
SetupApi gives as the same information as kernel driver
with IRP_MN_QUERY_INTERFACE.
https://support.microsoft.com/en-us/kb/253232
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* stub out get_pci_info if !CONFIG_QGA_NTDDSCSI
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This header file provides w32 ioctl definitions for working with disk
devices. Older versions of mingw do not expose this in a useable way,
so add a configure check and report it via CONFIG_QGA_NTDDSCSI.
Subsequent patches will use this macro to stub out functionality that
relies on this in cases where it's not available.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add the iphlpapi library to use APIs such as GetAdaptersInfo and
GetAdaptersAddresses.
Signed-off-by: Kirk Allan <kallan@suse.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Maydell
Stefan Weil
Marc-André Lureau
dann frazier
Andrew Jones
Roger Pau Monne
John Snow
Daniel P. Berrange
Stefan Hajnoczi
OGAWA Hirofumi
David Marchand
Michael Roth
Markus Armbruster
Gerd Hoffmann
David Hildenbrand
Chen Gang
Konrad Rzeszutek Wilk
Jan Beulich
Alexandre Derumier
Peter Crosthwaite
Marc-André Lureau
Laurent Vivier
Andreas Färber
Radim Krčmář
Kirk Allan