riscv/qemu - qemu - Gitea: Git with a cup of tea

Commit Graph

Author	SHA1	Message	Date
John Snow	6832189fd7	python: drop pipenv The pipenv tool was nice in theory, but in practice it's just too hard to update selectively, and it makes using it a pain. The qemu.qmp repo dropped pipenv support a while back and it's been functioning just fine, so I'm backporting that change here to qemu.git. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20230210003147.1309376-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	3 years ago
John Snow	37094b6dd5	python: rename qemu.aqmp to qemu.qmp Now that we are fully switched over to the new QMP library, move it back over the old namespace. This is being done primarily so that we may upload this package simply as "qemu.qmp" without introducing confusion over whether or not "aqmp" is a new protocol or not. The trade-off is increased confusion inside the QEMU developer tree. Sorry! Note: the 'private' member "_aqmp" in legacy.py also changes to "_qmp"; not out of necessity, but just to remove any traces of the "aqmp" name. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Beraldo Leal <bleal@redhat.com> Acked-by: Hanna Reitz <hreitz@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org> Message-id: 20220330172812.3427355-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	4 years ago
John Snow	adaca6e085	python: remove the old QMP package Thank you for your service! Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Beraldo Leal <bleal@redhat.com> Message-id: 20220330172812.3427355-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	4 years ago
John Snow	fd9c3a6219	python: move qmp-shell under the AQMP package Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Beraldo Leal <bleal@redhat.com>	4 years ago
John Snow	6f84d726f3	python: rename 'venv-check' target to 'check-pipenv' Well, Cleber was right, this is a better name. In preparation for adding a different kind of virtual environment check (One that simply uses whichever version of Python you happen to have), rename this test 'check-pipenv' so that it matches the CI job 'check-python-pipenv'. Remove the "If you don't know which test to run" hint, because it's not actually likely you have Python 3.6 installed to be able to run the test. It's still the test I'd most prefer you to run, but it's not the test you are most likely to be able to run. Rename the 'venv' target to 'pipenv' as well, and move the more pertinent help text under the 'check-pipenv' target. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	5 years ago
John Snow	d2ae942984	python: Add no-install usage instructions It's not encouraged, but it's legitimate to want to know how to do. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-7-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	5 years ago
John Snow	4176dbd8b5	python: README.rst touchups Clarifying a few points; removing the reference to 'setuptools' because it isn't referenced anywhere else in this document and doesn't really provide any useful information to a Python newcomer. Adjusting the language elsewhere to be less ambiguous and have fewer run-on sentences. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	5 years ago
John Snow	6560379fac	python: add Makefile for some common tasks Add "make venv" to create the pipenv-managed virtual environment that contains our explicitly pinned dependencies. Add "make check" to run the python linters [in the host execution environment]. Add "make venv-check" which combines the above two: create/update the venv, then run the linters in that explicitly managed environment. Add "make develop" which canonizes the runes needed to get both the linting pre-requisites (the "[devel]" part), and the editable live-install (the "-e" part) of these python libraries. make clean: delete miscellaneous python packaging output possibly created by pipenv, pip, or other python packaging utilities make distclean: delete the above, the .venv, and the editable "qemu" package forwarder (qemu.egg-info) if there is one. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-29-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	5 years ago
John Snow	31622b2a8a	python: add avocado-framework and tests Try using avocado to manage our various tests; even though right now they're only invoking shell scripts and not really running any python-native code. Create tests/, and add shell scripts which call out to mypy, flake8, pylint and isort to enforce the standards in this directory. Add avocado-framework to the setup.cfg development dependencies, and add avocado.cfg to store some preferences for how we'd like the test output to look. Finally, add avocado-framework to the Pipfile environment and lock the new dependencies. We are using avocado >= 87.0 here to take advantage of some features that Cleber has helpfully added to make the test output here very friendly and easy to read for developers that might chance upon the output in Gitlab CI. [Note: ALL of the dependencies get updated to the most modern versions that exist at the time of this writing. No way around it that I have seen. Not ideal, but so it goes.] Provided you have the right development dependencies (mypy, flake8, isort, pylint, and now avocado-framework) You should be able to run "avocado --config avocado.cfg run tests/" from the python folder to run all of these linters with the correct arguments. (A forthcoming commit adds the much easier 'make check'.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-28-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	5 years ago
John Snow	dbe75f5566	python: add devel package requirements to setuptools setuptools doesn't have a formal understanding of development requires, but it has an optional feataures section. Fine; add a "devel" feature and add the requirements to it. To avoid duplication, we can modify pipenv to install qemu[devel] instead. This enables us to run invocations like "pip install -e .[devel]" and test the package on bleeding-edge packages beyond those specified in Pipfile.lock. Importantly, this also allows us to install the qemu development packages in a non-networked mode: `pip3 install --no-index -e .[devel]` will now fail if the proper development dependencies are not already met. This can be useful for automated build scripts where fetching network packages may be undesirable. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-27-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	5 years ago
John Snow	41c1d81cf2	python: Add pipenv support pipenv is a tool used for managing virtual environments with pinned, explicit dependencies. It is used for precisely recreating python virtual environments. pipenv uses two files to do this: (1) Pipfile, which is similar in purpose and scope to what setup.cfg lists. It specifies the requisite minimum to get a functional environment for using this package. (2) Pipfile.lock, which is similar in purpose to `pip freeze > requirements.txt`. It specifies a canonical virtual environment used for deployment or testing. This ensures that all users have repeatable results. The primary benefit of using this tool is to ensure rock solid repeatable CI results with a known set of packages. Although I endeavor to support as many versions as I can, the fluid nature of the Python toolchain often means tailoring code for fairly specific versions. Note that pipenv is not required to install or use this module; this is purely for the sake of repeatable testing by CI or developers. Here, a "blank" pipfile is added with no dependencies, but specifies Python 3.6 for the virtual environment. Pipfile will specify our version minimums, while Pipfile.lock specifies an exact loadout of packages that were known to operate correctly. This latter file provides the real value for easy setup of container images and CI environments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-15-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	5 years ago
John Snow	eae4e442ca	python: add MANIFEST.in When creating a source or binary distribution via 'python3 setup.py <sdist\|bdist>', the VERSION and PACKAGE.rst files aren't bundled by default. Create a MANIFEST.in file that instructs the build tools to include these so that installation from these files won't fail. This is required by 'tox', as well as by the tooling needed to upload packages to PyPI. Exclude the 'README.rst' file -- that's intended as a guidebook to our source tree, not a file that needs to be distributed. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-14-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	5 years ago
John Snow	93128815af	python: add directory structure README.rst files Add short readmes to python/, python/qemu/, python/qemu/machine, python/qemu/qmp, and python/qemu/utils that explain the directory hierarchy. These readmes are visible when browsing the source on e.g. gitlab/github and are designed to help new developers/users quickly make sense of the source tree. They are not designed for inclusion in a published manual. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-13-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	5 years ago

13 Commits (9269b9d1888c2b17d2e9948abf9f6310b3afbac3)