This function is not used anywhere, so remove it.
Markus Armbruster adds:
The i82078 floppy device model used to call bdrv_media_changed() to
implement its media change bit when backed by a host floppy. This
went away in 21fcf36 "fdc: simplify media change handling".
Probably broke host floppy media change. Host floppy pass-through
was dropped in commit f709623. bdrv_media_changed() has never been
used for anything else. Remove it.
(Source is Message-ID: <87y3ruaypm.fsf@dusky.pond.sub.org>)
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Maximum size calculation is trivial for the raw format: it's just the
requested image size (because there is no metadata).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-3-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The lone caller that cares about a return of BDRV_BLOCK_RAW
(namely, io.c:bdrv_co_get_block_status) completely replaces the
return value, so there is no point in passing BDRV_BLOCK_DATA.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related
functions (and some others) to 'int bytes', as they both refer to bytes.
This helps with code legibility.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add missing error messages for the block driver implementations of
.bdrv_truncate(); drop the generic one from block.c's bdrv_truncate().
Since one of these changes touches a mis-indented block in
block/file-posix.c, this patch fixes that coding style issue along the
way.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-5-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
All callers will have to request permissions for all of their child
nodes. Block drivers that act as simply filters can use the default
implementation of .bdrv_child_perm().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
The way that attaching bs->file worked was a bit unusual in that it was
the only child that would be attached to a node which is not opened yet.
Because of this, the block layer couldn't know yet which permissions the
driver would eventually need.
This patch moves the point where bs->file is attached to the beginning
of the individual .bdrv_open() implementations, so drivers already know
what they are going to do with the child. This is also more consistent
with how driver-specific children work.
For a moment, bdrv_open() gets its own BdrvChild to perform image
probing, but instead of directly assigning this BdrvChild to the BDS, it
becomes a temporary one and the node name is passed as an option to the
drivers, so that they can simply use bdrv_open_child() to create another
reference for their own use.
This duplicated child for (the not opened yet) bs is not the final
state, a follow-up patch will change the image probing code to use a
BlockBackend, which is completely independent of bs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Given that we have raw-win32.c and raw-posix.c, my initial guess at
raw_bsd.c was that it was for dealing with raw files using code
specific to the BSD operating system (beyond what raw-posix could
do). Not so - this name was chosen back in commit e1c66c6 to
distinguish that it was a BSD licensed file, in contrast to the
then-existing raw.c with an unclear and potentially unusable
license. But since it has been more than three years since the
rewrite, it's time to pick a more useful name for this file to
avoid this type of confusion to future contributors that don't know
the backstory, as none of our other files are named solely by the
license they use.
In reality, this file deals with the raw format, which is useful
with any number of protocols, while raw-{win32,posix} deal with
the file protocol (and in turn, that protocol is not limited to
use with the raw format). So rename raw_bsd to raw-format.c. We
could have also used the shorter name raw.c, except that collides
with the earlier use of that filename for a different license,
and it's better to be safe than risk license pollution.
The next patch will also rename raw-win32.c and raw-posix.c to
further distinguish the difference in roles.
It doesn't hurt that this gets rid of an underscore in the filename,
thereby making tab-completion on 'ra<TAB>' easier (now I don't have
to type the shift key, which slows things down :)
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We make sure that the size is aligned to sector length to prevent any
round ups. Otherwise we could end up reading/writing data outside the
area specified by user. This is only needed when user supplies the size
option to avoid any surprises. It is not necessary when only offset is
set.
More over, the check made it difficult to use the offset option without
size option. The check puts unneeded restriction on the offset which had
to be aligned too. Because bdrv_getlength() returns aligned value having
unaligned offset would make the check fail.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When only offset is specified but no size and the offset is greater than
the real size of the containing device an overflow occurs when parsing
the options. This overflow is harmless because we do check for this
exact situation little bit later, but it leads to an error message with
weird values. It is better to do the check is sooner and prevent the
overflow.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Added two new options 'offset' and 'size'. This makes it possible to use
only part of the file as a device. This can be used e.g. to limit the
access only to single partition in a disk image or use a disk inside a
tar archive (like OVA).
When 'size' is specified we do our best to honour it.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's the simpler interface to use for the raw format driver.
Apart from that, this removes the last user of the AIO emulation
implemented by bdrv_aio_ioctl().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since the raw format driver is just passing things through, we can
do byte-based read and write if the underlying protocol does
likewise.
There's one tricky part - if we probed the image format, we document
that we restrict operations on the initial sector. It's easiest to
keep this guarantee by enforcing read-modify-write on sub-sector
operations (yes, this partially reverts commit ad82be2f).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1468624988-423-20-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards killing off sector-based block APIs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-16-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards byte-based interfaces everywhere. Replace
the sector-based bdrv_co_discard() with a new byte-based
bdrv_co_pdiscard(), which silently ignores any unaligned head
or tail. Driver callbacks will be converted in followup patches.
By calculating the alignment outside of the loop, and clamping
the max discard to an aligned value, we can simplify the actions
done within the loop.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-2-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The raw format layer supports all flags via passthrough - but
it only makes sense to pass through flags that the lower layer
actually supports.
The next patch gives stronger reasoning for why this is correct.
At the moment, the raw format layer ignores the max_transfer
limit of its protocol layer, and an attempt to do the qemu-io
'w -f 0 40m' to an NBD server that lacks FUA will pass the entire
40m request to the NBD driver, which then fragments the request
itself into a 32m write, 8m write, and flush. But once the block
layer starts honoring limits and fragmenting packets, the raw
driver will hand the NBD driver two separate requests; if both
requests have BDRV_REQ_FUA set, then this would result in a 32m
write, flush, 8m write, and second flush. By having the raw
layer no longer advertise FUA support when the protocol layer
lacks it, we are back to a single flush at the block layer for
the overall 40m request.
Note that 'w -f -z 0 40m' does not currently exhibit the same
problem, because there, the fragmentation does not occur until
at the NBD layer (the raw layer has .bdrv_co_pwrite_zeroes, and
the NBD layer doesn't advertise max_pwrite_zeroes to constrain
things at the raw layer) - but the problem is latent and we
would again have too many flushes without this patch once the
NBD layer implements support for the new NBD_CMD_WRITE_ZEROES
command, if it sets max_pwrite_zeroes to the same 32m limit as
recommended by the NBD protocol.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468607524-19021-3-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the final patch for converting the common I/O path to take
a BdrvChild parameter instead of BlockDriverState.
The completion of this conversion means that all users that perform I/O
on an image need to actually hold a reference (in the form of BdrvChild,
possible as part of a BlockBackend) to that image. This also protects
against inconsistent use of BlockBackend vs. BlockDriverState functions
because direct use of a BlockDriverState isn't possible any more and
blk->root is private for block-backends.c.
In addition, we can now distinguish different users in the I/O path,
and the future op blockers work is going to add assertions based on
permissions stored in BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
The raw block driver was blindly copying all limits from bs->file,
even though: 1. the main bdrv_refresh_limits() already does this
for many of the limits, and 2. blindly copying from the children
can weaken any stricter limits that were already inherited from
the backing chain during the main bdrv_refresh_limits(). Also,
a future patch is about to move .request_alignment into
BlockLimits, and that is a limit that should NOT be copied from
other layers in the BDS chain.
Thus, we can completely drop raw_refresh_limits(), and rely on
the block layer setting up the proper limits.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch simplifies code that uses a local_err variable just to
immediately use it for an error_propagate() call.
Coccinelle patch used to perform the changes added to
scripts/coccinelle/remove_local_err.cocci.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-3-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Blank line in s390-virtio-ccw.c restored]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
error_propagate() already ignores local_err==NULL, so there's no
need to check it before calling.
Coccinelle patch used to perform the changes added to
scripts/coccinelle/error_propagate_null.cocci.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rename to bdrv_pwrite_zeroes() to let the compiler ensure we
cater to the updated semantics. Do the same for bdrv_co_write_zeroes().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer has a couple of cases where it can lose
Force Unit Access semantics when writing a large block of
zeroes, such that the request returns before the zeroes
have been guaranteed to land on underlying media.
SCSI does not support FUA during WRITESAME(10/16); FUA is only
supported if it falls back to WRITE(10/16). But where the
underlying device is new enough to not need a fallback, it
means that any upper layer request with FUA semantics was
silently ignoring BDRV_REQ_FUA.
Conversely, NBD has situations where it can support FUA but not
ZERO_WRITE; when that happens, the generic block layer fallback
to bdrv_driver_pwritev() (or the older bdrv_co_writev() in qemu
2.6) was losing the FUA flag.
The problem of losing flags unrelated to ZERO_WRITE has been
latent in bdrv_co_do_write_zeroes() since commit aa7bfbff, but
back then, it did not matter because there was no FUA flag. It
became observable when commit 93f5e6d8 paved the way for flags
that can impact correctness, when we should have been using
bdrv_co_writev_flags() with modified flags. Compare to commit
9eeb6dd, which got flag manipulation right in
bdrv_co_do_zero_pwritev().
Symptoms: I tested with qemu-io with default writethrough cache
(which is supposed to use FUA semantics on every write), and
targetted an NBD client connected to a server that intentionally
did not advertise NBD_FLAG_SEND_FUA. When doing 'write 0 512',
the NBD client sent two operations (NBD_CMD_WRITE then
NBD_CMD_FLUSH) to get the fallback FUA semantics; but when doing
'write -z 0 512', the NBD client sent only NBD_CMD_WRITE.
The fix is do to a cleanup bdrv_co_flush() at the end of the
operation if any step in the middle relied on a BDS that does
not natively support FUA for that step (note that we don't
need to flush after every operation, if the operation is broken
into chunks based on bounce-buffer sizing). Each BDS gains a
new flag .supported_zero_flags, which parallels the use of
.supported_write_flags but only when accessing a zero write
operation (the flags MUST be different, because of SCSI having
different semantics based on WRITE vs. WRITESAME; and also
because BDRV_REQ_MAY_UNMAP only makes sense on zero writes).
Also fix some documentation to describe -ENOTSUP semantics,
particularly since iscsi depends on those semantics.
Down the road, we may want to add a driver where its
.bdrv_co_pwritev() honors all three of BDRV_REQ_FUA,
BDRV_REQ_ZERO_WRITE, and BDRV_REQ_MAY_UNMAP, and advertise
this via bs->supported_write_flags for blocks opened by that
driver; such a driver should NOT supply .bdrv_co_write_zeroes
nor .supported_zero_flags. But none of the drivers touched
in this patch want to do that (the act of writing zeroes is
different enough from normal writes to deserve a second
callback).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pre-patch, .supported_write_flags lives at the driver level, which
means we are blindly declaring that all block devices using a
given driver will either equally support FUA, or that we need a
fallback at the block layer. But there are drivers where FUA
support is a per-block decision: the NBD block driver is dependent
on the remote server advertising NBD_FLAG_SEND_FUA (and has
fallback code to duplicate the flush that the block layer would do
if NBD had not set .supported_write_flags); and the iscsi block
driver is dependent on the mode sense bits advertised by the
underlying device (and is currently silently ignoring FUA requests
if the underlying device does not support FUA).
The fix is to make supported flags as a per-BDS option, set during
.bdrv_open(). This patch moves the variable and fixes NBD and iscsi
to set it only conditionally; later patches will then further
simplify the NBD driver to quit duplicating work done at the block
layer, as well as tackle the fact that SCSI does not support FUA
semantics on WRITESAME(10/16) but only on WRITE(10/16).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It used to be an internal helper function just for implementing
bdrv_co_do_readv/writev(), but now that it's a public interface, it
deserves a name without "do" in it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This is a function that simply calls into the block driver for doing a
write, providing the byte granularity interface we want to eventually
have everywhere, and using whatever interface that driver supports.
This one is a bit more interesting than the version for reads: It adds
support for .bdrv_co_writev_flags() everywhere, so that drivers
implementing this function can drop .bdrv_co_writev() now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Pass through the FUA flag to the lower layer so that the separate flush
can be saved in practically relevant cases where a (raw) format driver
sits on top of the protocol driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The added parameter can be used to return the BDS pointer which the
valid offset is referring to. Its value should be ignored unless
BDRV_BLOCK_OFFSET_VALID in ret is set.
Until block drivers fill in the right value, let's clear it explicitly
right before calling .bdrv_get_block_status.
The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest
case 102 passing, and will be fixed once all drivers return the right file
pointer.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now the callback is not used any more, drop the field along with all
implementations in block drivers, which are iscsi and raw.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1447064214-29930-8-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With the new automatically-recursive implementation of
bdrv_is_inserted() checking by default whether all the children of a BDS
are inserted, we can drop raw's own implementation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_is_inserted(), blk_is_inserted(), and the callback
BlockDriver.bdrv_is_inserted() return a bool.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes the temporary duplication between bs->file and
bs->file_child by converting everything to BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce driver methods of defining disk blocksizes (physical and
logical) and hard drive geometry.
Methods are only implemented for "host_device". For "raw" devices
driver calls child's method.
For now geometry detection will only work for DASD devices. To check
that a local check_for_dasd function was introduced. It calls BIODASDINFO2
ioctl and returns its rc.
Blocksizes detection function will probe sizes for DASD devices.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-4-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are some block drivers which are essential to QEMU and may not be
removed: These are raw, file and qcow2 (as the default non-raw format).
Make their BlockDriver objects public so they can be directly referenced
throughout the block layer without needing to call bdrv_find_format()
and having to deal with an error at runtime, while the real problem
occurred during linking (where raw, file or qcow2 were not linked into
qemu).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Manos Pitsidianakis
Max Reitz
Stefan Hajnoczi
Eric Blake
Kevin Wolf
Tomáš Golembiovský
Eduardo Habkost
Markus Armbruster
Fam Zheng
Peter Maydell
Ekaterina Tumanova
Chunyan Liu