riscv/qemu - qemu - Gitea: Git with a cup of tea

Commit Graph

Author	SHA1	Message	Date
Peter Maydell	ee86981bda	migration: Revert postcopy-blocktime commit set This reverts commits `ca6011c` migration: add postcopy total blocktime into query-migrate `5f32dc8` migration: add blocktime calculation into migration-test `2f7dae9` migration: postcopy_blocktime documentation `3be98be` migration: calculate vCPU blocktime on dst side `01a87f0` migration: add postcopy blocktime ctx into MigrationIncomingState `31bf06a` migration: introduce postcopy-blocktime capability as they don't build on ppc32 due to trying to do atomic accesses on types that are larger than the host pointer type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	8 years ago
Alexey Perevalov	ca6011c232	migration: add postcopy total blocktime into query-migrate Postcopy total blocktime is available on destination side only. But query-migrate was possible only for source. This patch adds ability to call query-migrate on destination. To be able to see postcopy blocktime, need to request postcopy-blocktime capability. The query-migrate command will show following sample result: {"return": "postcopy-vcpu-blocktime": [115, 100], "status": "completed", "postcopy-blocktime": 100 }} postcopy_vcpu_blocktime contains list, where the first item is the first vCPU in QEMU. This patch has a drawback, it combines states of incoming and outgoing migration. Ongoing migration state will overwrite incoming state. Looks like better to separate query-migrate for incoming and outgoing migration or add parameter to indicate type of migration. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>	9 years ago
Alexey Perevalov	31bf06a9d6	migration: introduce postcopy-blocktime capability Right now it could be used on destination side to enable vCPU blocktime calculation for postcopy live migration. vCPU blocktime - it's time since vCPU thread was put into interruptible sleep, till memory page was copied and thread awake. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>	9 years ago
Juan Quintela	741d4086c8	migration: Use proper types in json We use int for everything (int64_t), and then we check that value is between 0 and 255. Change it to the valid types. This change only happens for HMP. QMP always use bytes and similar. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>	9 years ago
Anthony PERARD	5d6c599fe1	migration, xen: Fix block image lock issue on live migration When doing a live migration of a Xen guest with libxl, the images for block devices are locked by the original QEMU process, and this prevent the QEMU at the destination to take the lock and the migration fail. >From QEMU point of view, once the RAM of a domain is migrated, there is two QMP commands, "stop" then "xen-save-devices-state", at which point a new QEMU is spawned at the destination. Release locks in "xen-save-devices-state" so the destination can takes them, if it's a live migration. This patch add the "live" parameter to "xen-save-devices-state" which default to true so older version of libxenlight can work with newer version of QEMU. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>	9 years ago
Juan Quintela	73af8dd8d7	migration: Make xbzrle_cache_size a migration parameter Right now it is a variable in MigrationState instead of a MigrationParameter. The change allows to set it as the rest of the Migration parameters, from the command line, with query_migration_paramters, set_migrate_parameters, etc. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>	9 years ago
Juan Quintela	40a5532f82	qapi: Fix grammar in x-multifd-page-count descriptions Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>	9 years ago
Dr. David Alan Gilbert	89cfc02cb6	migration: migrate-continue A new qmp command allows the caller to continue from a given paused state. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>	9 years ago
Dr. David Alan Gilbert	31e060774c	migration: Add 'pre-switchover' and 'device' statuses Add two statuses for use when the 'pause-before-switchover' capability is enabled. 'pre-switchover' is the state that we wait in for management to allow us to continue. 'device' is the state we enter while serialising the devices after management gives us the OK. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>	9 years ago
Dr. David Alan Gilbert	93fbd0314e	migration: Add 'pause-before-switchover' capability When 'pause-before-switchover' is enabled, the outgoing migration will pause before invalidating the block devices and serializing the device state. At this point the management layer gets the chance to clean up any device jobs or other device users before the migration completes. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>	9 years ago
Juan Quintela	0fb86605ea	migration: Create x-multifd-page-count parameter Indicates how many pages we are going to send in each batch to a multifd thread. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Be consistent with defaults and documentation Use new DEFINE_PROP_* Rename x-multifd-group to x-multifd-page-count	9 years ago
Juan Quintela	4075fb1ca4	migration: Create x-multifd-channels parameter Indicates the number of channels that we will create. By default we create 2 channels. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Catch inconsistent defaults (eric). Improve comment stating that number of threads is the same than number of sockets Use new DEFIN_PROP_* Rename x-multifd-threads to x-multifd-threads	10 years ago
Juan Quintela	30126bbf1f	migration: Add multifd capability Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> -- Use new DEFINE_PROP	10 years ago
Markus Armbruster	48685a8e2c	qapi-schema: Collect migration stuff in qapi/migration.json Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-10-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>	9 years ago

14 Commits (82fcf66e052d6dae834255a814969c67e13b6791)