Legacy cpu hotplug has been removed totally and machines start with
modern cpu hotplug interface directly.
Therefore, update the documentation to describe current QEMU cpu hotplug
logic.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20260108033051.777361-7-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The company 'Arm' went through a rebranding many years back
involving a recapitalization from 'ARM' to 'Arm'. As a result
our documentation is a bit inconsistent between the two forms.
It's not worth trying to update everywhere in QEMU, but it's
easy enough to make docs/ consistent.
We last did this in commit 6fe6d6c9a in 2020, but a few new
uses of the wrong capitalization have crept back in since.
As before, "ARMv8" and similar architecture names, and
older CPU names like "ARM926" still retain all-caps.
In a few places we make minor grammar fixups as we touch
the sentences we're fixing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260115150545.669444-1-peter.maydell@linaro.org
Add a minimal PCI test device designed to exercise IOMMU translation
(such as ARM SMMUv3) without requiring guest firmware or OS. The device
provides MMIO registers to configure and trigger DMA operations with
controllable attributes (security state, address space), enabling
deterministic IOMMU testing.
Key features:
- Bare-metal IOMMU testing via simple MMIO interface
- Configurable DMA attributes for security states and address spaces
- Write-then-read verification pattern with automatic result checking
The device performs a deterministic DMA test pattern: write a known
value (0x12345678) to a configured GVA, read it back, and verify data
integrity. Results are reported through a dedicated result register,
eliminating the need for complex interrupt handling or driver
infrastructure in tests.
This is purely a test device and not intended for production use or
machine realism. It complements existing test infrastructure like
pci-testdev but focuses specifically on IOMMU translation path
validation.
Signed-off-by: Tao Tang <tangtao1634@phytium.com.cn>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20260119161112.3841386-4-tangtao1634@phytium.com.cn>
[PMD: Add SPDX-License-Identifier: GPL-2.0-or-later tag]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a small section talking about the 'riscv-aia' KVM setting we
implement and how it affects the provisioning of the IMSIC s-mode
in-kernel controller.
While we're at it, fix the formatting of the AIA bullet list.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20251028084622.1177574-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The GIC interrupts 128 - 136 were only used by the AST2700 A0 SoC.
Since the AST2700 A0 has been deprecated, these interrupt
definitions are no longer needed. This commit removes them to
clean up the codebase.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250901040808.1454742-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This patch extends the existing support we have for NVMe with only DoE
to also add support to SPDM over the NVMe Security Send/Recv commands.
With the new definition of the `spdm-trans` argument, users can specify
`spdm_trans=nvme` or `spdm_trans=doe`. This allows us to select the SPDM
transport respectively. SPDM over the NVMe Security Send/Recv commands
are defined in the DMTF DSP0286.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[k.jensen: fix declaration in case statement; fix quotes in docs]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
While the HEST layout didn't change, there are some internal
changes related to how offsets are calculated and how memory error
events are triggered.
Update specs to reflect such changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <e3e8bd92ce40d997c67ac1d4d973c0041b8f59fc.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spdm.rst docs call the 64-bit x86 architecture "x64-64".
This is a typo; correct it to our canonical name for the
architecture, "x86_64".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The iommu Linux kernel support is now upstream. VFIO is still
downstream at this stage.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250814001452.504510-1-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"Interrupt Pending Buffer" IPB, which got written as IBP due to typo.
The "IPB" register is also mentioned in same doc multiple times.
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The links to riscv iommu specification document are incorrect. This patch
updates all the said link to point to correct location.
Cc: qemu-stable@nongnu.org
Cc: qemu-riscv@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2808
Signed-off-by: hemanshu.khilari.foss <hemanshu.khilari.foss@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250323063404.13206-1-hemanshu.khilari.foss@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250224190826.1858473-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While the spec defines a CPER size of 4KiB for each record,
currently it is set to 1KiB. Fix the documentation and add
a pointer to the macro name there, as this may help to keep
it updated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <f7e94433bec19a9d6b23ecccc24b5fe3a6f7f52b.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Also add a new page, docs/specs/riscv-aia.rst, where we're documenting
the state of AIA support in QEMU w.r.t the controllers being emulated or
not depending on the AIA and accelerator settings.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a simple guideline to use the existing RISC-V IOMMU support we just
added.
This doc will be updated once we add the riscv-iommu-sys device.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V IOMMU PCI device we're going to add next is a reference
implementation of the riscv-iommu spec [1], which predicts that the
IOMMU can be implemented as a PCIe device.
However, RISC-V International (RVI), the entity that ratified the
riscv-iommu spec, didn't bother assigning a PCI ID for this IOMMU PCIe
implementation that the spec predicts. This puts us in an uncommon
situation because we want to add the reference IOMMU PCIe implementation
but we don't have a PCI ID for it.
Given that RVI doesn't provide a PCI ID for it we reached out to Red Hat
and Gerd Hoffman, and they were kind enough to give us a PCI ID for the
RISC-V IOMMU PCI reference device.
Thanks Red Hat and Gerd for this RISC-V IOMMU PCIe device ID.
[1] https://github.com/riscv-non-isa/riscv-iommu/releases/tag/v1.0.0
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20241016204038.649340-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Unfortunately, the definition of the footnote syntax requires
the author to use the awkward escaped space "\ " in the really common
case of "footnote marker at end of word or sentence"; and in fact the rST
documentation's examples of footnote syntax contain only artificial
examples that do *not* use the syntax. This resulted in ugly rendering
of footnotes throughout QEMU's documentation. Ensure the space is escaped
whenever the footnote must attach to the preceding word, and also use
a named reference for clarity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the footnotes with inline links whenever the footnote text
consists of nothing but the URL. While at it, make the link texts
consistent in the surrounding areas, for example avoiding usage of
"here" for the link's text.
In the case of acpi-bits.rst this fixes a build failure with Sphinx
8.1.0, because the FOSDEM link was duplicated in the paragraph and the
new version is a lot stricter about unreferenced footnotes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the rocker.txt specification document to rST format. We make
extensive use of the :: marker to introduce a literal block for all
the tables and ASCII art, rather than trying to convert the tables to
rST table syntax. This produces a valid rST document without needing
a huge diff.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240801170131.3977807-2-peter.maydell@linaro.org
This fixes the markup of the PCI and PCIe Expander Bridge entries to be
consistent with the rest of the file.
Signed-off-by: George Matsumura <gorg@gorgnet.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240805031012.16547-4-gorg@gorgnet.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Setup Data Object Exchange (DOE) as an extended capability for the NVME
controller and connect SPDM to it (CMA) to it.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20240703092027.644758-4-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI GED (as described in the ACPI 6.4 spec) uses an interrupt listed in the
_CRS object of GED to intimate OSPM about an event. Later then demultiplexes the
notified event by evaluating ACPI _EVT method to know the type of event. Use
ACPI GED to also notify the guest kernel about any CPU hot(un)plug events.
Note, GED interface is used by many hotplug events like memory hotplug, NVDIMM
hotplug and non-hotplug events like system power down event. Each of these can
be selected using a bit in the 32 bit GED IO interface. A bit has been reserved
for the CPU hotplug event.
ACPI CPU hotplug related initialization should only happen if ACPI_CPU_HOTPLUG
support has been enabled for particular architecture. Add cpu_hotplug_hw_init()
stub to avoid compilation break.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240716111502.202344-4-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Starting with the "Sandy Bridge" generation, Intel CPUs provide a RAPL
interface (Running Average Power Limit) for advertising the accumulated
energy consumption of various power domains (e.g. CPU packages, DRAM,
etc.).
The consumption is reported via MSRs (model specific registers) like
MSR_PKG_ENERGY_STATUS for the CPU package power domain. These MSRs are
64 bits registers that represent the accumulated energy consumption in
micro Joules. They are updated by microcode every ~1ms.
For now, KVM always returns 0 when the guest requests the value of
these MSRs. Use the KVM MSR filtering mechanism to allow QEMU handle
these MSRs dynamically in userspace.
To limit the amount of system calls for every MSR call, create a new
thread in QEMU that updates the "virtual" MSR values asynchronously.
Each vCPU has its own vMSR to reflect the independence of vCPUs. The
thread updates the vMSR values with the ratio of energy consumed of
the whole physical CPU package the vCPU thread runs on and the
thread's utime and stime values.
All other non-vCPU threads are also taken into account. Their energy
consumption is evenly distributed among all vCPUs threads running on
the same physical CPU package.
To overcome the problem that reading the RAPL MSR requires priviliged
access, a socket communication between QEMU and the qemu-vmsr-helper is
mandatory. You can specified the socket path in the parameter.
This feature is activated with -accel kvm,rapl=true,path=/path/sock.sock
Actual limitation:
- Works only on Intel host CPU because AMD CPUs are using different MSR
adresses.
- Only the Package Power-Plane (MSR_PKG_ENERGY_STATUS) is reported at
the moment.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-4-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The missing functionality has been implemented now.
This reverts commit e739d1935c.
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-8-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mention the fact that this event is not yet implemented
to avoid confusion.
As requested by Michael.
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240313-pvpanic-note-v1-1-7f2571cdaedc@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Shutdown requests are normally hardware dependent.
By extending pvpanic to also handle shutdown requests, guests can
submit such requests with an easily implementable and cross-platform
mechanism.
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240310-pvpanic-shutdown-spec-v1-1-b258e182ce55@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's been marked as deprecated since QEMU 8.0, so it should be fine
to remove this now.
Message-ID: <20240118103759.130748-3-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I noticed the code blocks where not rendering properly so thought I'd
better fix things up. So:
- Use better title for the machine type
- Explain why Xen is a little different
- Add a proper anchor to the tpm-device link
- add newline so code block properly renders
- add some indentation to make continuation clearer
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231207130623.360473-1-alex.bennee@linaro.org>
Convert docs/specs/vmgenid.txt to rST format.
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-9-peter.maydell@linaro.org
Convert docs/specs/virt-ctlr.txt to rST format.
I added the name of the device to give readers a bit more idea
of which device we're actually documenting here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-7-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert docs/specs/standard-vga.txt to rST format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-6-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert docs/specs/pvpanic.txt to rST format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-5-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert docs/specs/ivshmem-spec.txt to rST format.
In converting, I have dropped the sections on the device's command
line interface and usage, as they are already covered by the
user-facing docs in system/devices/ivshmem.rst.
I have also removed the reference to Memnic, because the URL is dead
and a web search suggests that whatever this was it's pretty much
sunk without trace.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-4-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert docs/specs/edu.txt to rST format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230927151205.70930-3-peter.maydell@linaro.org
Convert the docs/specs/vmw_pvscsi-spec.txt file to rST format.
This conversion includes some minor wordsmithing of the text
to fix some grammar nits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230927151205.70930-2-peter.maydell@linaro.org
Universal Flash Storage (UFS) is a high-performance mass storage device
with a serial interface. It is primarily used as a high-performance
data storage device for embedded applications.
This commit contains code for UFS device to be recognized
as a UFS PCI device.
Patches to handle UFS logical unit and Transfer Request will follow.
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 10232660d462ee5cd10cf673f1a9a1205fc8276c.1693980783.git.jeuk20.kim@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert pci-testdev.txt to reStructuredText. Includes
some minor wordsmithing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230420160334.1048224-4-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert pci-serial.txt to reStructuredText. This includes
some wordsmithing, and the correction of the docs to note
that the Windows inf file includes 2x and 4x support
(as it has done since commit dc9528fdf9 in 2014).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230420160334.1048224-3-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the pci-ids document from plain text to reStructuredText.
I opted to use definition-lists here because rST tables are
super-clunky, and actually formatting these as tables didn't
seem necessary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230420160334.1048224-2-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a documentation change for I2C TPM device support.
Qemu already supports devices attached to ISA and sysbus.
This drop adds support for the I2C bus attached TPM devices.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-2-ninadpalsule@us.ibm.com
Drop the list of modern virtio devices and explain how they
are calculated instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-5-kraxel@redhat.com>
Update the TPM documentation for usage of a TPM 2 rather than a TPM 1.2.
Adjust the command lines and expected outputs inside the VM accordingly.
Update the command line to start a TPM 2 with swtpm.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220927122146.2787854-1-stefanb@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-id: 20220812075642.1200578-1-sw@weilnetz.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Zhao Liu
Peter Maydell
Tao Tang
Daniel Henrique Barboza
Jamin Lin
Wilfred Mallawa
Mauro Carvalho Chehab
Joel Stanley
Aditya Gupta
hemanshu.khilari.foss
Philippe Mathieu-Daudé
Paolo Bonzini
George Matsumura
Salil Mehta
Anthony Harivel
Thomas Weißschuh
Ninad Palsule
Thomas Huth
Alex Bennée
Jeuk Kim
Gerd Hoffmann
Stefan Berger
Stefan Weil