riscv/qemu - qemu - Gitea: Git with a cup of tea

105361 Commits

68 Branches

448 Tags

581 MiB

Tree: 6f34807116

Commit Graph

Author	SHA1	Message	Date
Markus Armbruster	f01338cce6	qapi: Speed up frontend tests "make check-qapi-schema" takes around 10s user + system time for me. With -j, it takes a bit over 3s real time. We have worse tests. It's still annoying when you work on the QAPI generator. Some 1.4s user + system time is consumed by make figuring out what to do, measured by making a target that does nothing. There's nothing I can do about that right now. But let's see what we can do about the other 8s. Almost 7s are spent running test-qapi.py for every test case, the rest normalizing and diffing test-qapi.py output. We have 190 test cases. If I downgrade to python2, it's 4.5s, but python2 is a goner. Hacking up test-qapi.py to exit(0) without doing anything makes it only marginally faster. The problem is Python startup overhead. Our configure puts -B into $(PYTHON). Running without -B is faster: 4.4s. We could improve the Makefile to run test cases only when the test case or the generator changed. But I'm after improvement in the case where the generator changed. test-qapi.py is designed to be the simplest possible building block for a shell script to do the complete job (it's actually a Makefile, not a shell script; no real difference). Python is just not meant for that. It's for bigger blocks. Move the post-processing and diffing into test-qapi.py, and make it capable of testing multiple schema files. Set executable bits while there. Running it once per test case now takes slightly longer than 8s. But running it once for all of them takes under 0.2s. Messing with the Makefile to run it only on the tests that need retesting is clearly not worth the bother. Expected error output changes because the new normalization strips off $(SRCDIR)/tests/qapi-schema/ instead of just $(SRCDIR)/. The .exit files go away, because there is no exit status to test anymore. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20191018074345.24034-5-armbru@redhat.com>	7 years ago
Markus Armbruster	2ab218aad6	qapi: Change frontend error messages to start with lower case Starting error messages with a capital letter complicates things when text can get interpolated both at the beginning and in the middle of an error message. The next patch will do that. Switch to lower case to keep it simpler. For what it's worth, the GNU Coding Standards advise the message "should not begin with a capital letter when it follows a program name and/or file name, because that isn’t the beginning of a sentence. (The sentence conceptually starts at the beginning of the line.)" While there, avoid breaking lines containing multiple arguments in the middle of an argument. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20190927134639.4284-7-armbru@redhat.com>	7 years ago
Marc-André Lureau	3313b6124b	qapi: add qapi2texi script As the name suggests, the qapi2texi script converts JSON QAPI description into a texi file suitable for different target formats (info/man/txt/pdf/html...). It parses the following kind of blocks: Free-form: ## # = Section # == Subsection # # Some text foo with emphasis # 1. with a list # 2. like that # # And some code: # \| $ echo foo # \| -> do this # \| <- get that # ## Symbol description: ## # @symbol: # # Symbol body ditto ergo sum. Foo bar # baz ding. # # @param1: the frob to frobnicate # @param2: #optional how hard to frobnicate # # Returns: the frobnicated frob. # If frob isn't frobnicatable, GenericError. # # Since: version # Notes: notes, comments can have # - itemized list # - like this # # Example: # # -> { "execute": "quit" } # <- { "return": {} } # ## That's roughly following the following EBNF grammar: api_comment = "##\n" comment "##\n" comment = freeform_comment \| symbol_comment freeform_comment = { "# " text "\n" \| "#\n" } symbol_comment = "# @" name ":\n" { member \| tag_section \| freeform_comment } member = "# @" name ':' [ text ] "\n" freeform_comment tag_section = "# " ( "Returns:", "Since:", "Note:", "Notes:", "Example:", "Examples:" ) [ text ] "\n" freeform_comment text = free text with markup Note that the grammar is ambiguous: a line "# @foo:\n" can be parsed both as freeform_comment and as symbol_comment. The actual parser recognizes symbol_comment. See docs/qapi-code-gen.txt for more details. Deficiencies and limitations: - the generated QMP documentation includes internal types - union type support is lacking - type information is lacking in generated documentation - doc comment error message positions are imprecise, they point to the beginning of the comment. - a few minor issues, all marked TODO/FIXME in the code Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170113144135.5150-16-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [test-qapi.py tweaked to avoid trailing empty lines in .out] Signed-off-by: Markus Armbruster <armbru@redhat.com>	9 years ago

Author

SHA1

Message

Date

Markus Armbruster

f01338cce6

qapi: Speed up frontend tests

"make check-qapi-schema" takes around 10s user + system time for me.
With -j, it takes a bit over 3s real time.  We have worse tests.  It's
still annoying when you work on the QAPI generator.

Some 1.4s user + system time is consumed by make figuring out what to
do, measured by making a target that does nothing.  There's nothing I
can do about that right now.  But let's see what we can do about the
other 8s.

Almost 7s are spent running test-qapi.py for every test case, the rest
normalizing and diffing test-qapi.py output.  We have 190 test cases.

If I downgrade to python2, it's 4.5s, but python2 is a goner.

Hacking up test-qapi.py to exit(0) without doing anything makes it
only marginally faster.  The problem is Python startup overhead.

Our configure puts -B into $(PYTHON).  Running without -B is faster:
4.4s.

We could improve the Makefile to run test cases only when the test
case or the generator changed.  But I'm after improvement in the case
where the generator changed.

test-qapi.py is designed to be the simplest possible building block
for a shell script to do the complete job (it's actually a Makefile,
not a shell script; no real difference).  Python is just not meant for
that.  It's for bigger blocks.

Move the post-processing and diffing into test-qapi.py, and make it
capable of testing multiple schema files.  Set executable bits while
there.

Running it once per test case now takes slightly longer than 8s.  But
running it once for all of them takes under 0.2s.

Messing with the Makefile to run it only on the tests that need
retesting is clearly not worth the bother.

Expected error output changes because the new normalization strips off
$(SRCDIR)/tests/qapi-schema/ instead of just $(SRCDIR)/.

The .exit files go away, because there is no exit status to test
anymore.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-5-armbru@redhat.com>

7 years ago

Markus Armbruster

2ab218aad6

qapi: Change frontend error messages to start with lower case

Starting error messages with a capital letter complicates things when
text can get interpolated both at the beginning and in the middle of
an error message.  The next patch will do that.  Switch to lower case
to keep it simpler.

For what it's worth, the GNU Coding Standards advise the message
"should not begin with a capital letter when it follows a program name
and/or file name, because that isn’t the beginning of a sentence. (The
sentence conceptually starts at the beginning of the line.)"

While there, avoid breaking lines containing multiple arguments in the
middle of an argument.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-7-armbru@redhat.com>

7 years ago

Marc-André Lureau

3313b6124b

qapi: add qapi2texi script

As the name suggests, the qapi2texi script converts JSON QAPI
description into a texi file suitable for different target
formats (info/man/txt/pdf/html...).

It parses the following kind of blocks:

Free-form:

  ##
  # = Section
  # == Subsection
  #
  # Some text foo with *emphasis*
  # 1. with a list
  # 2. like that
  #
  # And some code:
  # | $ echo foo
  # | -> do this
  # | <- get that
  #
  ##

Symbol description:

  ##
  # @symbol:
  #
  # Symbol body ditto ergo sum. Foo bar
  # baz ding.
  #
  # @param1: the frob to frobnicate
  # @param2: #optional how hard to frobnicate
  #
  # Returns: the frobnicated frob.
  #          If frob isn't frobnicatable, GenericError.
  #
  # Since: version
  # Notes: notes, comments can have
  #        - itemized list
  #        - like this
  #
  # Example:
  #
  # -> { "execute": "quit" }
  # <- { "return": {} }
  #
  ##

That's roughly following the following EBNF grammar:

api_comment = "##\n" comment "##\n"
comment = freeform_comment | symbol_comment
freeform_comment = { "# " text "\n" | "#\n" }
symbol_comment = "# @" name ":\n" { member | tag_section | freeform_comment }
member = "# @" name ':' [ text ] "\n" freeform_comment
tag_section = "# " ( "Returns:", "Since:", "Note:", "Notes:", "Example:", "Examples:" ) [ text ]  "\n" freeform_comment
text = free text with markup

Note that the grammar is ambiguous: a line "# @foo:\n" can be parsed
both as freeform_comment and as symbol_comment.  The actual parser
recognizes symbol_comment.

See docs/qapi-code-gen.txt for more details.

Deficiencies and limitations:
- the generated QMP documentation includes internal types
- union type support is lacking
- type information is lacking in generated documentation
- doc comment error message positions are imprecise, they point
  to the beginning of the comment.
- a few minor issues, all marked TODO/FIXME in the code

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170113144135.5150-16-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[test-qapi.py tweaked to avoid trailing empty lines in .out]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

9 years ago

3 Commits (6f34807116ffef7c449a656dbe2091d4f4da89c8)