riscv/qemu - qemu - Gitea: Git with a cup of tea

Commit Graph

Author	SHA1	Message	Date
Alex Bennée	e1a0e635c9	backends/vhost-user: remove the ioeventfd check While ioeventfds are needed for good performance with KVM guests it should not be a gating requirement. We can run vhost-user backends using simulated ioeventfds or inband signalling. With this change I can run: $QEMU $OPTS \ -display gtk,gl=on \ -device vhost-user-gpu-pci,chardev=vhgpu \ -chardev socket,id=vhgpu,path=vhgpu.sock with: ./contrib/vhost-user-gpu/vhost-user-gpu \ -s vhgpu.sock \ -v and at least see things start-up - although the display gets rotated by 180 degrees. Once lightdm takes over we never make it to the login prompt and just get a blank screen. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20221202132231.1048669-1-alex.bennee@linaro.org> Message-Id: <20230130124728.175610-1-alex.bennee@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>	4 years ago
Markus Armbruster	6f1e91f716	error: Drop superfluous #include "qapi/qmp/qerror.h" Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230207075115.1525-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>	4 years ago
Stefano Garzarella	4daa5054c5	vhost: enable vrings in vhost_dev_start() for vhost-user devices Commit `02b61f38d3` ("hw/virtio: incorporate backend features in features") properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user backend, but we forgot to enable vrings as specified in docs/interop/vhost-user.rst: If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the ring starts directly in the enabled state. If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is initialized in a disabled state and is enabled by ``VHOST_USER_SET_VRING_ENABLE`` with parameter 1. Some vhost-user front-ends already did this by calling vhost_ops.vhost_set_vring_enable() directly: - backends/cryptodev-vhost.c - hw/net/virtio-net.c - hw/virtio/vhost-user-gpio.c But most didn't do that, so we would leave the vrings disabled and some backends would not work. We observed this issue with the rust version of virtiofsd [1], which uses the event loop [2] provided by the vhost-user-backend crate where requests are not processed if vring is not enabled. Let's fix this issue by enabling the vrings in vhost_dev_start() for vhost-user front-ends that don't already do this directly. Same thing also in vhost_dev_stop() where we disable vrings. [1] https://gitlab.com/virtio-fs/virtiofsd [2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217 Fixes: `02b61f38d3` ("hw/virtio: incorporate backend features in features") Reported-by: German Maglione <gmaglione@redhat.com> Tested-by: German Maglione <gmaglione@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20221123131630.52020-1-sgarzare@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>	4 years ago
Markus Armbruster	ff92444884	backends: Improve error messages when property can no longer be set When you try to set virtio-rng property "filename" after the backend has been completed with user_creatable_complete(), the error message blames "insufficient permission": $ qemu-system-x86_64 -S -display none -nodefaults -monitor stdio -object rng-random,id=rng0 -device virtio-rng,id=vrng0,rng=rng0 QEMU 7.1.50 monitor - type 'help' for more information (qemu) qom-set /objects/rng0 filename /dev/random Error: Insufficient permission to perform this operation This implies it could work with "sufficient permission". It can't. Change the error message to: Error: Property 'filename' can no longer be set Same for cryptodev-vhost-user property "chardev", rng-egd property "chardev", and vhost-user-backend property "chardev". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221012153801.2604340-3-armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> [Commit message tidied up]	4 years ago
Kevin Wolf	a6945f2287	vhost: Add Error parameter to vhost_dev_init() This allows callers to return better error messages instead of making one up while the real error ends up on stderr. Most callers can immediately make use of this because they already have an Error parameter themselves. The others just keep printing the error with error_report_err(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-2-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>	5 years ago
Eduardo Habkost	abb9369805	vhost-user: Register "chardev" as class property Class properties make QOM introspection simpler and easier, as they don't require an object to be instantiated. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200921221045.699690-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>	6 years ago
Eduardo Habkost	c734cd40a1	qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPE The requirement to specify the parent class type makes the macro harder to use and easy to misuse (silent bugs can be introduced if the wrong struct type is specified). Simplify the macro by just not declaring any class struct, allowing us to remove the class_size field from the TypeInfo variables for those types. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200916182519.415636-3-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>	6 years ago
Markus Armbruster	d2623129a7	qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]	6 years ago
Raphael Norwitz	b8487a3578	backends/vhost-user.c: prevent using uninitialized vqs Similar rational to: `e6cc11d64f` For vhost scsi and vhost-user-scsi an issue was observed where, of the 3 virtqueues, seabios would only set cmd, leaving ctrl and event without a physical address. This can caused vhost_verify_ring_part_mapping to return ENOMEM, causing the following logs: qemu-system-x86_64: Unable to map available ring for ring 0 qemu-system-x86_64: Verify ring failure on region 0 The issue has already been fixed elsewhere, but it was noted that in backends/vhost-user.c, the vhost_user_backend_dev_init() function, which other vdevs use in their realize() to initialize their vqs, was not being properly zeroing out the queues. This commit ensures hardware modules using the vhost_user_backend_dev_init() API properly zero out their vqs on initialization. Suggested-by: Philippe Mathieu-Daude <philmd@redhat.com> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1566498865-55506-2-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>	7 years ago
Markus Armbruster	a27bd6c779	Include hw/qdev-properties.h less In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>	7 years ago
Marc-André Lureau	f24bb7287d	Add vhost-user-backend Create a vhost-user-backend object that holds a connection to a vhost-user backend (or "slave" process) and can be referenced from virtio devices that support it. See later patches for input & gpu usage. Note: a previous iteration of this object made it user-creatable, and allowed managed sub-process spawning, but that has been dropped for now. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190503130034.24916-4-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>	7 years ago

11 Commits (6cb2011fedf8c4e7b66b4a3abd6b42c1bae99ce6)