Some small bugfixes for the 715/64 machine:
- fix CPU detection of 715 in HP-UX and NetBSD
- minor cleanups regarding LASI_SCSI for 715
Signed-off-by: Helge Deller <deller@gmx.de>
This is SeaBIOS for the hppa architecture v20
and it contains mostly bugfixes for issues which
were introduced by adding the 715/64 machine.
Fixes include:
- Fix inventory for 715 Snake machine
- Detect if LASI LAN and SCSI exists at startup
- Allow LASI LAN on B160L if created by qemu
- Enhance error messages
Signed-off-by: Helge Deller <deller@gmx.de>
Update the sam460ex firmware to match 2015.c version from the machine
vendor which fixes USB devices and some other bugs. Also cherry pick
some commits from upstream U-Boot that moves licenses in a subdir and
allows gitlab to correctly detect and show license information. Drop
version number from the binary name to avoid needing to change it in
case of future updates.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20251028151923.10DBB5972E5@zero.eik.bme.hu>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
- Fix some measurements in the TPM code
- Fix for compiling with GCC in C23 mode
- Silence some initializer-string warnings with recent GCC
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20251027074404.25758-1-thuth@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
This is SeaBIOS for the hppa architecture v19.
It's required to support the new 715 machine,
which uses a LASI NCR710 SCSI controller.
New:
- Added new 715 machine (Snake machine, no PCI bus)
- Added driver for NCR710 SCSI on LASI (Soumyajyotii Ssarkar)
Fixes & cleanups:
- Fix memory size detection on NetBSD
- Snake machines do not support the PDC_SYSTEM_MAP call
- Always return the HPA in pdc_mem_map() PDC call
- Add LMMIO range for internal artist graphic card
- various coding style cleanups
Signed-off-by: Helge Deller <deller@gmx.de>
Update OpenSBI and the pre-built opensbi32 and opensbi64 images to
version 1.7.
It has been almost an year since we last updated OpenSBI (at the time,
up to v1.5.1) and we're missing a lot of good stuff from both v1.6 and
v1.7, including SBI 3.0 and RPMI 1.0.
The changelog is too large and tedious to post in the commit msg so I
encourage refering to [1] and [2] to see the new features we're adding
into the QEMU roms.
[1] https://github.com/riscv-software-src/opensbi/releases/tag/v1.6
[2] https://github.com/riscv-software-src/opensbi/releases/tag/v1.7
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Changes:
7b1eb5f ast27x0: Fix Makefile to unconditionally set CC to support correct cross-compilation
601d410 ast27x0: Fix missing SCU module reset for SSP and TSP initialization
80768e4 ast27x0: Initialize and enable SSP/TSP using SCU with reserved-memory from DTB
f8ab635 ast27x0: Show build date and git version
53294f5 Add initial support for AST27x0
b1c2803 Dynamically detects NPCM8XX UBOOT destination and size.
4f54dfc Automatically search for UBOOT location for NPCM8xx images.
The actual bootroms are not updated yet.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Link: https://lore.kernel.org/qemu-devel/2a89ad4c8f5665d07952a4f1749caa6ec0cd3d9c.1753654515.git.mjt@tls.msk.ru
[ clg: Update to latest vbootrom ]
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Since commit 70ce076fa6, the actual rom source dirs
are subdirs of vbootrom/ submodule, not in top-level of it.
Fixes: 70ce076fa6 "roms: Update vbootrom to 1287b6e"
Fixes: 269b7effd9 ("pc-bios: Add NPCM8XX vBootrom")
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250727215511.807880-1-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
git shortlog rel-1.16.3..rel-1.17.0
-----------------------------------
Andrej Kruták (1):
Add AHCI Power ON + ICC_ACTIVE into port setup code
Daniel Khodabakhsh (2):
boot: Force display of the boot menu when boot-menu-wait is a negative number
usb-hid: Support multiple USB HID devices by storing them in a linked list
Daniel Verkamp (3):
vbe: Add VBE 2.0+ OemData field to struct vbe_info
vgasrc: round up save/restore size
vbe: implement function 09h (get/set palette data)
Daniil Tatianin (1):
pciinit: don't misalign large BARs
Gerd Hoffmann (6):
limit address space used for pci devices, part two
drop obsolete acpi table code
drop acpi tables and hex includes
add romfile_loadbool()
update pci_pad_mem64 handling
ahci: add controller reset
Igor Mammedov (1):
fix smbios blob length overflow
Jiaxun Yang (1):
ahci: Fix hangs due to controller reset
Kevin O'Connor (14):
vgasrc: Use curmode_g instead of vmode_g when mode is the current video mode
vgasrc: Rename vgahw_get_linesize() to vgahw_minimum_linelength()
stdvgamodes: No need to store pelmask in vga_modes[]
stdvgamodes: Improve naming of dac palette tables
stdvga: Rename CGA palette functions
stdvga: Add comments to interface functions in stdvga.c
stdvga: Rename stdvga_toggle_intensity() to stdvga_set_palette_blinking()
stdvga: Rework stdvga palette index paging interface functions
stdvga: Rename stdvga_set_text_block_specifier() to stdvga_set_font_location()
stdvga: Rename stdvga_set_scan_lines() to stdvga_set_character_height()
stdvga: Rename stdvga_get_vde() to stdvga_get_vertical_size()
stdvga: Add stdvga_set_vertical_size() helper function
stdvgaio: Only read/write one color palette entry at a time
docs: Note v1.17.0 release
Mark Cave-Ayland (2):
esp-scsi: terminate DMA transfer when ESP data transfer completes
esp-scsi: indicate acceptance of MESSAGE IN phase data
Max Tottenham (1):
Add LBA 64bit support for reads beyond 2TB.
Steven Price (1):
vgabios: Fix generating modes list for static_functionality
nikolar via SeaBIOS (1):
kconfig: fix the check-lxdialog.sh to work with gcc 14+
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The HOMER is a region of memory used by host and firmware and
microconrollers. It has very little logic by itself, just some BAR
registers. Users of this memory should operate on it rather than
have HOMER implement them with MMIO registers, which is not the
right model.
This change switches the implementation of HOMER from MMIO to RAM,
and moves the OCC register implementation to in-memory structure
accesses performed by the OCC model.
This has the downside that access to unimplemented regions of HOMER
are no longer flagged. Perhaps that could be done by adding a memory
region for HOMER, and ram subregions under that for each implemented
part. But for now this takes the simpler approach.
Note: This brings some data structure definitions from skiboot, which
does not match QEMU coding style but is not changed to make comparisons
and updates simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This adds TPM pass through API.
Also, moves SLOF from github to gitlab.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This skiboot firmware importantly contains updates for HOMER/OCC bugs.
These subsystems have bitrotted in QEMU and skiboot and this update
allows new QEMU models to be exercised.
Power11 support is also added. This model is not yet merged in QEMU,
but firmware support will make development and testing simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The bootrom is a minimal bootrom used to load an NPCM8XX image.
The source code is located in the same repo as the NPCM7XX one:
github.com/google/vbootrom/tree/master/npcm8xx.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-3-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This newer vbootrom supports NPCM8xx. Similar to the NPCM7XX one
it supports loading the UBoot from the SPI device and not more.
We updated the npcm7xx bootrom to be compiled from this version.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-2-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is SeaBIOS for the hppa architecture v18.
It allows us to emulate up to 256 GB RAM on 64-bit
guests and to boot HP-UX 64-bit one step further.
Fixes:
- Fix PDC_CACHE/PDC_CACHE_RET_SPID return value for space
register hashing on 64-bit HP-UX
- Fix IRT table entries to use slot number
- Increase PCI alignment for memory bars to 64k
New PDC functions & general enhancements:
- Allow up to 256 GB RAM on 64-bit machines
Signed-off-by: Helge Deller <deller@gmx.de>
Updates the subhook submodule to point to a edk2 mirror repo.
Fixes recursive cloning of the edk2 submodule.
Cc: Peter Maydell <peter.maydell@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2660
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20241111100701.2620020-1-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is SeaBIOS for the hppa architecture v17.
If comes with some important firmware and SCSI fixes and
prepares for futher development to support 64-bit HP-UX
and MPE/UX in the future.
New PDC functions & general enhancements:
- Add PDC_MODEL_GET_INSTALL_KERNEL firmware call
- Add PDC_PAT_EVENT firmware call
- Support ENTRY_IO_BOOTOUT
- Prefer memory-access over io-access of GSP serial port
- Disable LMMIO_DIRECT0 range during modification
- Small optimizations in IODC call
Fixes:
- esp-scsi: indicate acceptance of MESSAGE IN phase data
- Avoid crash when booting without SCSI controller
- Remove exec flag from hppa-firmware.img
- Fix LMMIO detection for PCI cards on Astro/Elroy
- Avoid trashing MPE IPL bootloader stack
- HP-UX 11 64-bit saves number of RAM pages in PAGE0 at 0x33c
- Fix return value of PDC_CACHE/PDC_CACHE_RET_SPID for space id hashing
- Allow PDC functions to act when called in narrow mode
- pcidevice: Use portaddr_t for io port addresses
Cleanups:
- Change default make target to "parisc"
- Clean the "out-64" directory on "make clean"
Signed-off-by: Helge Deller <deller@gmx.de>
Added loongarch UEFI BIOS support to compiled scripts.
UEFI code images require 16M alignment, flash images require
16M alignment, under the loongarch architecture.This is agreed
upon when the firmware is loaded in QEMU under Loongarch.
The naming of UEFI under loongarch refers to the x86 and arm naming methods,
and the UEFI image names in x86 and arm are:
edk2-i386-code.fd
edk2-i386-vars.fd
edk2-arm-code.fd
edk2-arm-vars.fd
So on loongarch, we named it:
edk2-loongarch64-code.fd
edk2-loongarch64-vars.fd
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Message-ID: <20240724022245.1317884-1-lixianglai@loongson.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A new minor version of OpenSBI was just released after our bump to
OpenSBI 1.5. It contains significant bug fixes that it's worth doing
a new update for QEMU 9.1.
Submodule roms/opensbi 455de672dd..43cace6c36:
> lib: sbi: check result of pmp_get() in is_pmp_entry_mapped()
> lib: sbi: fwft: fix incorrect size passed to sbi_zalloc()
> lib: sbi: dbtr: fix potential NULL pointer dereferences
> include: Adjust Sscofpmf mhpmevent mask for upper 8 bits
> lib: sbi_hsm: Save/restore menvcfg only when it exists
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240805120259.1705016-2-dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bring a bit more consistency into the naming.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240327102448.61877-4-kraxel@redhat.com>
Turned out hard-coding version and date in the Makefile wasn't a bright
idea. Updating it on edk2 updates is easily forgotten. Fetch the info
from git instead. Store in edk2-version, so this can be committed to
the repo and is present in tarballs too.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240327102448.61877-2-kraxel@redhat.com>
pseries machines before version 2.11 have undergone many changes to
correct issues, mostly regarding migration compatibility. This is
obfuscating the code uselessly and makes maintenance more difficult.
Remove them and only keep the last version of the 2.x series, 2.12,
still in use by old distros.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This includes a number of improvements and fixes. Importantly there
is a change for QEMU platforms to permit the ChipTOD to be initialised
if it is present in the device tree. This will facilitate ChipTOD
enablement in pnv.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SeaBIOS-hppa version 16 news & enhancements:
- Initial 64-bit firmware release
- Added fault handler to catch and report firmware bugs
- Use Qemu's builtin_console_out() via diag 0x101
- parisc-qemu-install Makefile target to install firmware in qemu
- Added -fw_cfg opt/OS64,string=3 option
Fixes:
- Avoid crash when booting without SCSI controller
- Avoid possible crashes while detecting LASI LAN & graphics
- Don't check layers in PDC_MEM_MAP_HPA, fixes NetBSD
- Ensure cache definition does not trigger endless loops
- Mark B160L as 32-bit machine in inventory
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Fix the address translation for PDC space on PA2.0 if PSW.W=0.
Basically, for any address in the 32-bit PDC range from 0xf0000000 to
0xf1000000 keep the lower 32-bits and just set the upper 32-bits to
0xfffffff0.
This mapping fixes the emulated power button in PDC space for 32- and
64-bit machines and is how the physical C3700 machine seems to map
PDC.
Figures H-10 and H-11 in the parisc2.0 spec [1] show that the 32-bit
region will be mapped somewhere into a higher and bigger 64-bit PDC
space. The start and end of this 64-bit space is defined by the
physical address bits. But the figures don't specifiy where exactly the
mapping will start inside that region. Tests on a real HP C3700
regarding the address of the power button indicate, that the lower
32-bits will stay the same though.
[1] https://parisc.wiki.kernel.org/images-parisc/7/73/Parisc2.0.pdf
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It's been a while. This fixes compile warning, typos and
a bug with virtio-serial being used after it was shutdown
at "quiesce".
The full changelog is here:
Alexey Kardashevskiy (2):
Remove ?PICK
version: update to 20230918
Jordan Niethe (1):
virtio-serial: Do not close stdout on quiesce
Kautuk Consul (1):
virtio-serial: Make read and write methods report failure
Thomas Huth (10):
lib/libnet/ipv6: Silence compiler warning from Clang
Fix typos in the board-qemu folder
Fix typos in the lib/libnet folder
Fix typos in the remaining lib folders
Fix typos in the slof folder
Fix typos in the board-js2x folder
Fix typos in the llfw folder
Fix typos in the board-js2x folder
Fix typos in the clients folder
Fix remaining typos in various folders
Compiled with gcc-12.1.0-nolibc
Tested with (sorry, no KVM):
/home/aik/b/q-slof/qemu-system-ppc64 \
-nodefaults \
-chardev stdio,id=STDIO0,signal=off,mux=on \
-device spapr-vty,id=svty0,reg=0x71000110,chardev=STDIO0 \
-mon id=MON0,chardev=STDIO0,mode=readline \
-nographic \
-vga none \
-m 2G \
-kernel /home/aik/t/vml4150le \
-initrd /home/aik/t/le.cpio \
-machine pseries,cap-cfpc=broken,cap-sbbc=broken,cap-ibs=broken,cap-ccf-assist=off \
-bios pc-bios/slof.bin \
-trace events=/home/aik/qemu_trace_events \
-d guest_errors \
-chardev socket,id=SOCKET0,server=on,wait=off,path=qemu.mon.604650 \
-mon chardev=SOCKET0,mode=control \
-name 604650,debug-threads=on
[ npiggin: Also tested with KVM, including with virtio-console. ]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SEABIOS_HPPA_VERSION 12 contains those fixes and enhancements:
- Reduce debug level
- Update README file for PA-RISC
- Fix debug name of CPU_HPA_xx if xx >= 10
- Disable device indexing
SEABIOS_HPPA_VERSION 11 contains those fixes and enhancements
(mostly to enable support for 64-bit Linux kernel):
- Fixed 64-bit CPU detection via "mfctl,w" instruction
- Implement PDC_PSW for 64-bit CPUs
- Added PAT PDC functions:
- PDC_PAT_CELL
- PDC_PAT_CHASSIS_LOG
- PDC_PAT_PD_GET_ADDR_MAP
- PDC_PAT_CPU
- Fix return value of PDC_CACHE_RET_SPID space-id bits
- Introduce new default software IDs for the machines
- Fix CPU and FPU model numbers
- Fix 64-bit SMP rendezvous
- Fix Linux 64-bit kernel crash in STI due to usage of unsigned
32-bit "next_font" pointer in sti header files
- Fix graphics output to LASI artist card on PA2.0 machines
- More USB OHCI endianess fixes
- Fixes which make ODE run on B160L
- Fixes which make ODE detect Astro Runway port and CPUs
- Implement "firmware unlocking" via PDC_MODEL/PDC_MODEL_CAPABILITIES call
- Add subfunction 2 for PDC_MODEL_VERSIONS
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Enhancements:
- Initial support for 64-bit CPUs with Astro/Elroy (e.g. C3700
workstation)
- USB support (OHCI)
- better PCI support
- esp-scsi fixes from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Helge Deller <deller@gmx.de>
python3 may not be the expected python version.
Use PYTHON to invoke python.
Fixes: 22e11539e1 ("edk2: replace build scripts")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
git shortlog
------------
Gerd Hoffmann (7):
disable array bounds warning
better kvm detection
detect physical address space size
move 64bit pci window to end of address space
be less conservative with the 64bit pci io window
qemu: log reservations in fw_cfg e820 table
check for e820 conflict
José Martínez (1):
Fix high memory zone initialization in CSM mode
Lukas Stockner via SeaBIOS (1):
virtio-blk: Fix integer overflow for large max IO sizes
Mark Cave-Ayland (3):
esp-scsi: flush FIFO before sending SCSI command
esp-scsi: check for INTR_BS/INTR_FC instead of STAT_TC for command completion
esp-scsi: handle non-DMA SCSI commands with no data phase
Niklas Cassel via SeaBIOS (1):
ahci: handle TFES irq correctly
Tony Titus via SeaBIOS (1):
Increase BUILD_MAX_E820 to 128
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
bios.bin is now used only by ISA PC, so PCI drivers are not necessary.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Helge Deller
BALATON Zoltan
Thomas Huth
Daniel Henrique Barboza
Michael Tokarev
Gerd Hoffmann
Nicholas Piggin
Alexey Kardashevskiy
Hao Wu
Mark Cave-Ayland
Xianglai Li
Cédric Le Goater
Bin Meng
Olaf Hering
Paolo Bonzini