Problem: Currently the reset scaling hotkey is inconsistent between SDL
and GTK graphics modes.
Solution: Fix SDL to use MOD+0 instead of MOD+u which is in line with
GTK and generally more consistent with other apps.
This is also related to my previously sent patch fixing the docs.
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250910114929.GA1783677@lichtman.org>
When using sdl display backend, if the window is scaled, incorrect mouse
positions will be reported since scaling is not properly handled. Fix it
by transforming the positions from window coordinate to guest buffer
coordinate.
Signed-off-by: Weifeng Liu <weifeng.liu@intel.com>
Message-ID: <20250511073337.876650-6-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Windows only:
The libSDL2 Windows message loop needs the libSDL2 Windows low
level keyboard hook procedure to grab the left and right Windows
keys correctly. Reenable the SDL2 Windows keyboard hook procedure.
Since SDL2 2.30.4 the SDL2 keyboard hook procedure also filters
out the special left Control key event for every Alt Gr key event
on keyboards with an international layout. This means the QEMU low
level keyboard hook procedure is no longer needed. Remove the QEMU
Windows keyboard hook procedure.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2139
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2323
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Link: https://lore.kernel.org/r/20241231115950.6732-1-vr_qemu@t-online.de
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
macOS's Cocoa event handling must be done on the initial (main) thread
of the process. Furthermore, if library or application code uses
libdispatch, the main dispatch queue must be handling events on the main
thread as well.
So far, this has affected Qemu in both the Cocoa and SDL UIs, although
in different ways: the Cocoa UI replaces the default qemu_main function
with one that spins Qemu's internal main event loop off onto a
background thread. SDL (which uses Cocoa internally) on the other hand
uses a polling approach within Qemu's main event loop. Events are
polled during the SDL UI's dpy_refresh callback, which happens to run
on the main thread by default.
As UIs are mutually exclusive, this works OK as long as nothing else
needs platform-native event handling. In the next patch, a new device is
introduced based on the ParavirtualizedGraphics.framework in macOS.
This uses libdispatch internally, and only works when events are being
handled on the main runloop. With the current system, it works when
using either the Cocoa or the SDL UI. However, it does not when running
headless. Moreover, any attempt to install a similar scheme to the
Cocoa UI's main thread replacement fails when combined with the SDL
UI.
This change tidies up main thread management to be more flexible.
* The qemu_main global function pointer is a custom function for the
main thread, and it may now be NULL. When it is, the main thread
runs the main Qemu loop. This represents the traditional setup.
* When non-null, spawning the main Qemu event loop on a separate
thread is now done centrally rather than inside the Cocoa UI code.
* For most platforms, qemu_main is indeed NULL by default, but on
Darwin, it defaults to a function that runs the CFRunLoop.
* The Cocoa UI sets qemu_main to a function which runs the
NSApplication event handling runloop, as is usual for a Cocoa app.
* The SDL UI overrides the qemu_main function to NULL, thus
specifying that Qemu's main loop must run on the main
thread.
* The GTK UI also overrides the qemu_main function to NULL.
* For other UIs, or in the absence of UIs, the platform's default
behaviour is followed.
This means that on macOS, the platform's runloop events are always
handled, regardless of chosen UI. The new PV graphics device will
thus work in all configurations. There is no functional change on other
operating systems.
Implementing this via a global function pointer variable is a bit
ugly, but it's probably worth investigating the existing UI thread rule
violations in the SDL (e.g. #2537) and GTK+ back-ends. Fixing those
issues might precipitate requirements similar but not identical to those
of the Cocoa UI; hopefully we'll see some kind of pattern emerge, which
can then be used as a basis for an overhaul. (In fact, it may turn
out to be simplest to split the UI/native platform event thread from the
QEMU main event loop on all platforms, with any UI or even none at all.)
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-2-phil@philjordan.eu>
[PMD: Declare 'qemu_main' symbol in tests/qtest/fuzz/fuzz.c,
add missing g_assert_not_reached() call in main()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Before 176e3783f2 (ui/sdl2: OpenGL window context)
SDL_CreateRenderer was called unconditionally setting
the swap interval to 0. Since SDL_CreateRenderer is now no
longer called when OpenGL is enabled, the swap interval is
no longer set explicitly and vsync handling depends on
the environment settings which may lead to a performance
regression with virgl as reported in
https://gitlab.com/qemu-project/qemu/-/issues/2565
Restore the old vsync handling by explicitly calling
SDL_GL_SetSwapInterval if OpenGL is enabled.
Fixes: 176e3783f2 (ui/sdl2: OpenGL window context)
Closes: https://gitlab.com/qemu-project/qemu/-/issues/2565
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <01020191e05ce6df-84da6386-62c2-4ce8-840e-ad216ac253dd-000000@eu-west-1.amazonses.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Ignore GUI keys for SDL_TEXTINPUT events, just like GUI keys are
ignored for SDL_KEYDOWN events. This prevents unintended text input
in a text console when hiding the text console with the GUI keys.
The SDL_TEXTINPUT event always comes after the SDL_KEYDOWN event.
See https://github.com/libsdl-org/SDL/issues/1659.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240909061552.6122-3-vr_qemu@t-online.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Each virtual console in the SDL2 frontend has a key state map.
When switching windows with GUI keys we have to release all
pressed modifier keys in the currently active window, because
after the switch the now inactive window no longer receives the
key release events.
To reproduce the issue open a text editor in the SDL UI and then
press Ctrl-Alt-2 to open a Compat Monitor Console. Close the
console with the mouse. Try to enter text in the text editor and
notice that the modifier keys Ctrl and Alt are stuck and need to
be pressed once to be released.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240909061552.6122-2-vr_qemu@t-online.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This improves DisplayGLMode's generated enumeration
constant prefix from DISPLAYGL_MODE to DISPLAY_GL_MODE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240904111836.3273842-9-armbru@redhat.com>
By default, SDL disables the screen saver which prevents the host from powering
down the screen even if the screen is locked. This results in draining the
battery needlessly when the host isn't connected to a wall charger. Fix that by
enabling the screen saver.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240512095945.1879-1-shentey@gmail.com>
Previously, when using the SDL2 UI on MacOS, the title bar uses incorrect
key names (such as Ctrl and Alt instead of the standard MacOS key symbols
like ⌃ and ⌥). This commit changes sdl_update_caption in ui/sdl2.c to
use the correct symbols when compiling for MacOS (CONFIG_DARWIN is
defined).
Unfortunately, standard Mac keyboards do not include a "Right-Ctrl" key,
so in the case that the SDL grab mode is set to HOT_KEY_MOD_RCTRL, the
default text is still used.
Signed-off-by: Adrian Wowk <dev@adrianwowk.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231030024119.28342-1-dev@adrianwowk.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Although an input is routed depending on the console,
qemu_input_is_absolute() had no mechanism to specify the console.
Accept QemuConsole as an argument for qemu_input_is_absolute, and let
the display know the absolute/relative state for a particular console.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230921082936.28100-1-akihiko.odaki@daynix.com>
They are QemuTextConsole functions, let's make it clear.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Those functions are specifc to text/vc console, make that explicit from
the argument type.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230830093843.3531473-45-marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230823065335.1919380-2-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When OpenGL is enabled, create only the OpenGL context, ignoring the SDL
renderer as it is unused anyway.
Signed-off-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230612091959.2983-1-quic_acaggian@quicinc.com>
Windows sends an extra left control key up/down input event for
every right alt key up/down input event for keyboards with
international layout. Since commit 830473455f ("ui/sdl2: fix
handling of AltGr key on Windows") QEMU uses a Windows low level
keyboard hook procedure to reliably filter out the special left
control key and to grab the keyboard on Windows.
The SDL2 version 2.0.16 introduced its own Windows low level
keyboard hook procedure to grab the keyboard. Windows calls this
callback before the QEMU keyboard hook procedure. This disables
the special left control key filter when the keyboard is grabbed.
To fix the problem, disable the SDL2 Windows low level keyboard
hook procedure.
Reported-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230418062823.5683-1-vr_qemu@t-online.de>
SDL doesn't grab Alt+F4 under Windows by default. Pressing Alt+F4 thus closes
the VM immediately without confirmation, possibly leading to data loss. Fix
this by always grabbing Alt+F4 on Windows hosts, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417192139.43263-3-shentey@gmail.com>
By default, SDL grabs Alt+Tab only in non-fullscreen mode. This causes Alt+Tab
to switch tasks on the host rather than in the VM in fullscreen mode while it
switches tasks in non-fullscreen mode in the VM. Fix this confusing behavior
by grabbing Alt+Tab in fullscreen mode, always causing tasks to be switched in
the VM.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417192139.43263-2-shentey@gmail.com>
This workaround was put in place in the original implementation almost
10 years ago, considering a very old SDL2 version. Currently it prevents
users to run in a wayland-only environment without manually forcing the
backend.
The SDL2 wayland backend has been supported by distributions for a very
long time (e.g. in Fedora, first available 8 years ago), and is now
considered stable and becoming the default for new SDL2 releases.
Instead of requiring the x11 backend to exist by default, let new qemu
releases run with the default chosen by the installed SDL2 version.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230301141205.514338-1-ernunes@redhat.com>
-display sdl,gl=es didn't actually use OpenGL ES.
Using OpenGL ES allows to use ANGLE, which works generally better than
Windows/OEM OpenGL driver.
(note: users can still bypass the QEMU choice with SDL_RENDER_DRIVER
environment variable)
(note: for some reason, specifying a driver disables batching and
breaks rendering, so enable it explicitly)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Enable SDL logging when QEMU_ENABLE_SDL_LOGGING variable is set, as
suggested by Sam Lantinga, upstream SDL maintainer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no guarantee to have a current GL context here. The current
code seems to rely on the renderer using a GL backend, and to set a
current GL context. But this is not always the case, for example if the
renderer backend is DirectX.
This change is enough to fix using virgl with sdl2 on win32, on my setup.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The "-display sdl" option still uses a hand-crafted parser for its
parameters since we didn't want to drag an interface we considered
somewhat flawed into the QAPI schema. Since the flaws are gone now,
it's time to QAPIfy.
This introduces the new "DisplaySDL" QAPI struct that is used to hold
the parameters that are unique to the SDL display. The only specific
parameter is currently "grab-mod" that is used to specify the required
modifier keys to escape from the mouse grabbing mode.
Message-Id: <20220519155625.1414365-3-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As expected from the "compatible_dcl" comment, a simple comparison of
ops isn't enough. The following patch will fix a regression introduced
by this limited check by extending the compatibility callback for
egl-headless.
For now, this patch simply replaces the the "compatible_dcl" ops pointer
with a "dpy_gl_ctx_is_compatible_ctx" callback.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This will allow to have one GL context but a variable number of
listeners.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Consoles can have an associated GL context, without listeners (they may
be added or removed later on).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
A remote client, such as Spice, will already avoid flooding the stream
by delaying the resize requests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Setting environment variables can fail; check the return value
from g_setenv() and bail out if we couldn't set SDL_VIDEODRIVER.
Fixes: Coverity 1458798
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210809161424.32355-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-12-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are no users left.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210204105232.834642-7-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a QMP command to allow for the behaviors specified by the
-no-reboot and -no-shutdown command line option to be set at runtime.
The new command is named set-action and takes optional arguments, named
after an event, that provide a corresponding action to take.
Example:
-> { "execute": "set-action",
"arguments": {
"reboot": "none",
"shutdown": "poweroff",
"watchdog": "debug" } }
<- { "return": {} }
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com>
[Split the series differently, with -action based on the QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to specify SDL_WINDOW_OPENGL if we want to create an OpenGL context on it, i.e. when using '-device virtio-gpu-pci,virgl=on'
Signed-off-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de>
Message-id: b2ba98b3-2975-0d4d-1c56-f659923c714d@rwth-aachen.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU with SDL 1.2 display used to enable keyboard and mouse grab-
bing when started in full screen. The SDL 2.0 code tries to do
the same but fails to enable grabbing because sdl_grab_start(0)
returns early. To do it's work the sdl_grab_start() function
needs a pointer to a sdl2_console structure.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-7-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Wire up the keyboard hooking code on Windows to fix the AltGr
key and improve keyboard grabbing.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-6-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I found SDL_GetWindowFromID() sometimes return NULL when I start qemu via
ssh forwarding even the window has been crated already. I am not sure
whether this is a bug of SDL, but we'd better check it carefully.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Message-id: 20200427132412.17909-1-changbin.du@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use DisplayOpts settings instead of cursor_hide global variable.
Also make "-display sdl,show-cursor=on" work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have a setenv() wrapper in os-win32.c that no one is actually using.
Drop it and change to g_setenv() uniformly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576074210-52834-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
Use the new keyboard state tracked for sdl2. We can drop the modifier
state tracking from sdl2. Also keyup code is simpler, the state tracker
will take care to not send suspious keyup events to the guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-4-kraxel@redhat.com
Modern desktop environments can render icons at very large sizes,
especially with high DPI screens. Providing a 32x32 pixel bitmap is
nowhere near sufficient anymore.
When displayed in GNOME shell the QEMU icon looks awful, having been
scaled up to at least x4 its base size. This is compounded by the fact
that the BMP file doesn't do transparency, so while we've removed white
pixels, we still have anti-aliased nearly-white pixels which make the
logo look appalling on black backgrounds.
Loading a high resolution PNG icon addresses both problems, but requires
use of the extra SDL2_image library.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU currently installs logos to $prefix/share/qemu/ which means no GUI
toolkit or applications can find them by default.
The accepted standards for desktop applications declare that application
logos / icons should be installed under $prefix/share/icons, so use this
directory location.
Pre-rendered icons are provided at the standard sizes expected for GUI
applications, along with the scalable SVG, to ensure maximum portability.
The PNGs are rendered from the SVG using inkscape, however, this is not
wired up into the default make rules to avoid requiring inkscape as a
mandatory tool in build systems / developer workstations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without that, window effects in KWin get suspended as soon as any
qemu-sdl window becomes visible. While the SDL default makes sense
for games, it's not really suitable for QEMU.
Signed-off-by: Sebastian Krzyszkowiak <dos@dosowisko.net>
Message-id: 20181024143748.4425-1-dos@dosowisko.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Otherwise sdl2 will show no window in case no graphical
display device is present.
Reproducer: qemu -nodefaults -display sdl -serial vc
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180912114300.6976-1-kraxel@redhat.com
We've got to set the gui_fullscreen variable before creating the
SDL2 window, otherwise the initial window will not be created in
fullscreen mode.
Buglink: https://bugs.launchpad.net/bugs/1780812
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531161850-6860-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Nir Lichtman
Weifeng Liu
Volker Rümelin
Phil Dennis-Jordan
Philippe Mathieu-Daudé
Gert Wollny
Markus Armbruster
Akihiko Odaki
Bernhard Beschow
Adrian Wowk
Marc-André Lureau
Michael Tokarev
Antonio Caggiano
Erico Nunes
Thomas Huth
Dmitry Petrov
Peter Maydell
Gerd Hoffmann
Alejandro Jimenez
Darrell Walisser
Jan Henrik Weinstock
Paolo Bonzini
Changbin Du
Daniel P. Berrangé
Sebastian Krzyszkowiak