Switch the CMSDK APB watchdog device over to using its Clock input;
the wdogclk_frq property is now ignored.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-21-peter.maydell@linaro.org
Message-id: 20210121190622.22000-21-peter.maydell@linaro.org
Switch the CMSDK APB dualtimer device over to using its Clock input;
the pclk-frq property is now ignored.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-20-peter.maydell@linaro.org
Message-id: 20210121190622.22000-20-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Switch the CMSDK APB timer device over to using its Clock input; the
pclk-frq property is now ignored.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-19-peter.maydell@linaro.org
Message-id: 20210121190622.22000-19-peter.maydell@linaro.org
Create and connect the Clock input for the watchdog device on the
Stellaris boards. Because the Stellaris boards model the ability to
change the clock rate by programming PLL registers, we have to create
an output Clock on the ssys_state device and wire it up to the
watchdog.
Note that the old comment on ssys_calculate_system_clock() got the
units wrong -- system_clock_scale is in nanoseconds, not
milliseconds. Improve the commentary to clarify how we are
calculating the period.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-18-peter.maydell@linaro.org
Message-id: 20210121190622.22000-18-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Convert the SSYS code in the Stellaris boards (which encapsulates the
system registers) to a proper QOM device. This will provide us with
somewhere to put the output Clock whose frequency depends on the
setting of the PLL configuration registers.
This is a migration compatibility break for lm3s811evb, lm3s6965evb.
We use 3-phase reset here because the Clock will need to propagate
its value in the hold phase.
For the moment we reset the device during the board creation so that
the system_clock_scale global gets set; this will be removed in a
subsequent commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-17-peter.maydell@linaro.org
Message-id: 20210121190622.22000-17-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Create a fixed-frequency Clock object to be the SYSCLK, and wire it
up to the devices that require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-14-peter.maydell@linaro.org
Message-id: 20210121190622.22000-14-peter.maydell@linaro.org
The old-style convenience function cmsdk_apb_timer_create() for
creating CMSDK_APB_TIMER objects is used in only two places in
mps2.c. Most of the rest of the code in that file uses the new
"initialize in place" coding style.
We want to connect up a Clock object which should be done between the
object creation and realization; rather than adding a Clock* argument
to the convenience function, convert the timer creation code in
mps2.c to the same style as is used already for the watchdog,
dualtimer and other devices, and delete the now-unused convenience
function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-13-peter.maydell@linaro.org
Message-id: 20210121190622.22000-13-peter.maydell@linaro.org
Create two input clocks on the ARMSSE devices, one for the normal
MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the
appropriate devices. The old property-based clock frequency setting
will remain in place until conversion is complete.
This is a migration compatibility break for machines mps2-an505,
mps2-an521, musca-a, musca-b1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-12-peter.maydell@linaro.org
Message-id: 20210121190622.22000-12-peter.maydell@linaro.org
While we transition the ARMSSE code from integer properties
specifying clock frequencies to Clock objects, we want to have the
device provide both at once. We want the final name of the main
input Clock to be "MAINCLK", following the hardware name.
Unfortunately creating an input Clock with a name X creates an
under-the-hood QOM property X; for "MAINCLK" this clashes with the
existing UINT32 property of that name.
Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the
MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be
deleted.
Commit created with:
perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-11-peter.maydell@linaro.org
Message-id: 20210121190622.22000-11-peter.maydell@linaro.org
As the first step in converting the CMSDK_APB_TIMER device to the
Clock framework, add a Clock input. For the moment we do nothing
with this clock; we will change the behaviour from using the
wdogclk-frq property to using the Clock once all the users of this
device have been converted to wire up the Clock.
This is a migration compatibility break for machines mps2-an385,
mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a,
musca-b1, lm3s811evb, lm3s6965evb.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-10-peter.maydell@linaro.org
Message-id: 20210121190622.22000-10-peter.maydell@linaro.org
As the first step in converting the CMSDK_APB_DUALTIMER device to the
Clock framework, add a Clock input. For the moment we do nothing
with this clock; we will change the behaviour from using the pclk-frq
property to using the Clock once all the users of this device have
been converted to wire up the Clock.
We take the opportunity to correct the name of the clock input to
match the hardware -- the dual timer names the clock which drives the
timers TIMCLK. (It does also have a 'pclk' input, which is used only
for the register and APB bus logic; on the SSE-200 these clocks are
both connected together.)
This is a migration compatibility break for machines mps2-an385,
mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a,
musca-b1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-9-peter.maydell@linaro.org
Message-id: 20210121190622.22000-9-peter.maydell@linaro.org
As the first step in converting the CMSDK_APB_TIMER device to the
Clock framework, add a Clock input. For the moment we do nothing
with this clock; we will change the behaviour from using the pclk-frq
property to using the Clock once all the users of this device have
been converted to wire up the Clock.
Since the device doesn't already have a doc comment for its "QEMU
interface", we add one including the new Clock.
This is a migration compatibility break for machines mps2-an505,
mps2-an521, musca-a, musca-b1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-8-peter.maydell@linaro.org
Message-id: 20210121190622.22000-8-peter.maydell@linaro.org
The state struct for the CMSDK APB timer device doesn't follow our
usual naming convention of camelcase -- "CMSDK" and "APB" are both
acronyms, but "TIMER" is not so should not be all-uppercase.
Globally rename the struct to "CMSDKAPBTimer" (bringing it into line
with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains
as-is because "UART" is an acronym).
Commit created with:
perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-7-peter.maydell@linaro.org
Message-id: 20210121190622.22000-7-peter.maydell@linaro.org
Add a simple test of the CMSDK dual timer, since we're about to do
some refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210128114145.20536-6-peter.maydell@linaro.org
Message-id: 20210121190622.22000-6-peter.maydell@linaro.org
Add a simple test of the CMSDK watchdog, since we're about to do some
refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-5-peter.maydell@linaro.org
Message-id: 20210121190622.22000-5-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add a simple test of the CMSDK APB timer, since we're about to do
some refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-4-peter.maydell@linaro.org
Message-id: 20210121190622.22000-4-peter.maydell@linaro.org
Add a function for checking whether a clock has a source. This is
useful for devices which have input clocks that must be wired up by
the board as it allows them to fail in realize rather than ploughing
on with a zero-period clock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-3-peter.maydell@linaro.org
Message-id: 20210121190622.22000-3-peter.maydell@linaro.org
The ptimer API currently provides two methods for setting the period:
ptimer_set_period(), which takes a period in nanoseconds, and
ptimer_set_freq(), which takes a frequency in Hz. Neither of these
lines up nicely with the Clock API, because although both the Clock
and the ptimer track the frequency using a representation of whole
and fractional nanoseconds, conversion via either period-in-ns or
frequency-in-Hz will introduce a rounding error.
Add a new function ptimer_set_period_from_clock() which takes the
Clock object directly to avoid the rounding issues. This includes a
facility for the user to specify that there is a frequency divider
between the Clock proper and the timer, as some timer devices like
the CMSDK APB dualtimer need this.
To avoid having to drag in clock.h from ptimer.h we add the Clock
type to typedefs.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-2-peter.maydell@linaro.org
Message-id: 20210121190622.22000-2-peter.maydell@linaro.org
Add a test case for pvpanic-pci device. The scenario is the same as pvpanic
ISA device, but is using the PCI bus.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
[PMM: added code to free dev and pcibus, which the oss-fuzz
build otherwise complains about as a leak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add pvpanic PCI device support details in docs/specs/pvpanic.txt.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c
where the PCI specific routines reside and update the build system with the new
files and config structure.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To ease the PCI device addition in next patches, split the code as follows:
- generic code (read/write/setup) is being kept in pvpanic.c
- ISA dependent code moved to pvpanic-isa.c
Also, rename:
- ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE.
- TYPE_PVPANIC -> TYPE_PVPANIC_ISA.
- MemoryRegion io -> mr.
- pvpanic_ioport_* in pvpanic_*.
Update the build system with the new files and config structure.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In macOS 11, QEMU only gets access to Hypervisor.framework if it has the
respective entitlement. Add an entitlement template and automatically self
sign and apply the entitlement in the build.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A workaround added in early days of 64-bit OSX forced x86_64 if the
host machine had 64-bit support. This creates issues when cross-
compiling for ARM64. Additionally, the user can always use --cpu=* to
manually set the host CPU and therefore this workaround should be
removed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-12-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On iOS there is no CoreAudio, so we should not assume Darwin always
has it.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210126012457.39046-11-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-9-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add objc to the Meson cross file as well as detection of Darwin.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210126012457.39046-8-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Meson will find CoreFoundation, IOKit, and Cocoa as needed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-7-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Build without error on hosts without a working system(). If system()
is called, return -1 with ENOSYS.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-6-j@getutm.app
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The iOS toolchain does not use the host prefix naming convention. So we
need to enable cross-compile options while allowing the PREFIX to be
blank.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-3-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the preadv availability check to meson.build. This is what we
want to be doing for host-OS-feature-checks anyway, but it also fixes
a problem with building for macOS with the most recent XCode SDK on a
Catalina host.
On that configuration, 'preadv()' is provided as a weak symbol, so
that programs can be built with optional support for it and make a
runtime availability check to see whether the preadv() they have is a
working one or one which they must not call because it will
runtime-assert. QEMU's configure test passes (unless you're building
with --enable-werror) because the test program using preadv()
compiles, but then QEMU crashes at runtime when preadv() is called,
with errors like:
dyld: lazy symbol binding failed: Symbol not found: _preadv
Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication
Expected in: /usr/lib/libSystem.B.dylib
dyld: Symbol not found: _preadv
Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication
Expected in: /usr/lib/libSystem.B.dylib
Meson's own function availability check has a special case for macOS
which adds '-Wl,-no_weak_imports' to the compiler flags, which forces
the test to require the real function, not the macOS-version-too-old
stub.
So this commit fixes the bug where macOS builds on Catalina currently
require --disable-werror.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210126155846.17109-1-peter.maydell@linaro.org
Fix potential overflow problem when calculating pwm_duty.
1. Ensure p->cmr and p->cnr to be from [0,65535], according to the
hardware specification.
2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1)
can excceed UINT32_MAX, we convert them to uint64_t in computation
and converted them back to uint32_t.
(duty is guaranteed to be <= MAX_DUTY so it won't overflow.)
Fixes: CID 1442342
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Doug Evans <dje@google.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210127011142.2122790-1-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add secure pl061 for reset/power down machine from
the secure world (Arm Trusted Firmware). Connect it
with gpio-pwr driver.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
[PMM: Added mention of the new device to the documentation]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No functional change. Just refactor code to better
support secure and normal world gpios.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement gpio-pwr driver to allow reboot and poweroff machine.
This is simple driver with just 2 gpios lines. Current use case
is to reboot and poweroff virt machine in secure mode. Secure
pl066 gpio chip is needed for that.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The properties to attach a CANBUS object to the xlnx-zcu102 machine have
a period in them. We want to use periods in properties for compound QAPI types,
and besides the "xlnx-zcu102." prefix is both unnecessary and different
from any other machine property name. Remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210118162537.779542-1-pbonzini@redhat.com
Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only define the register if it exists for the cpu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210120031656.737646-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was defined at some point before ARMv8.4, and will
shortly be used by new processor descriptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
-----BEGIN PGP SIGNATURE-----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=gFsg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
# gpg: Signature made Wed 27 Jan 2021 19:56:00 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: rename and move 169 and 199 tests
iotests: rewrite check into python
iotests: add testrunner.py
iotests: add testenv.py
iotests: add findtests.py
iotests: 146: drop extra whitespaces from .out file
virtio-scsi-test: Test writing to scsi-cd device
block: Separate blk_is_writable() and blk_supports_write_perm()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Similar to the existing QAPI_LIST_PREPEND, but designed for use where
we want to preserve insertion order. Callers will be added in
upcoming patches. Note the difference in signature: PREPEND takes
List*, APPEND takes List**.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 54aa3de72e switched multiple sites to use QAPI_LIST_PREPEND
instead of open-coding, but missed a couple of spots.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210113221013.390592-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
On first glance, the loop in qmp_query_rx_filter() has early return
paths that could leak any allocation of filter_list from a previous
iteration. But on closer inspection, it is obvious that all of the
early exits are guarded by has_name, and that the bulk of the loop
body can be executed at most once if the user is filtering by name,
thus, any early exit coincides with an empty list. Add asserts to
make this obvious.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename bitmaps migration tests and move them to tests subdirectory to
demonstrate new human-friendly test naming.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell
Mihai Carabas
Alexander Graf
Joelle van Dyne
Philippe Mathieu-Daudé
Hao Wu
Maxim Uvarov
Paolo Bonzini
Richard Henderson
Eric Blake
Vladimir Sementsov-Ogievskiy