riscv/qemu - qemu - Gitea: Git with a cup of tea

Commit Graph

Author	SHA1	Message	Date
Eric Blake	3b1f244c59	nbd: Allow export of multiple bitmaps for one device With this, 'qemu-nbd -B b0 -B b1 -f qcow2 img.qcow2' can let you sniff out multiple bitmaps from one server. qemu-img as client can still only read one bitmap per client connection, but other NBD clients (hello libnbd) can now read multiple bitmaps in a single pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201027050556.269064-8-eblake@redhat.com>	6 years ago
Eric Blake	47ec485e8d	nbd: Refactor counting of metadata contexts Rather than open-code the count of negotiated contexts at several sites, embed it directly into the struct. This will make it easier for upcoming commits to support even more simultaneous contexts. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>	6 years ago
Eric Blake	02e87e3b1c	nbd: Simplify qemu bitmap context name Each dirty bitmap already knows its name; by reducing the scope of the places where we construct "qemu:dirty-bitmap:NAME" strings, tracking the name is more localized, and there are fewer per-export fields to worry about. This in turn will make it easier for an upcoming patch to export more than one bitmap at once. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201027050556.269064-6-eblake@redhat.com>	6 years ago
Eric Blake	cbad81cef8	nbd: Update qapi to support exporting multiple bitmaps Since 'block-export-add' is new to 5.2, we can still tweak the interface; there, allowing 'bitmaps':['str'] is nicer than 'bitmap':'str'. This wires up the qapi and qemu-nbd changes to permit passing multiple bitmaps as distinct metadata contexts that the NBD client may request, but the actual support for more than one will require a further patch to the server. Note that there are no changes made to the existing deprecated 'nbd-server-add' command; this required splitting the QAPI type BlockExportOptionsNbd, which fortunately does not affect QMP introspection. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-5-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>	6 years ago
Eric Blake	8675cbd68b	nbd: Utilize QAPI_CLONE for type conversion Rather than open-coding the translation from the deprecated NbdServerAddOptions type to the preferred BlockExportOptionsNbd, it's better to utilize QAPI_CLONE_MEMBERS. This solves a couple of issues: first, if we do any more refactoring of the base type (which an upcoming patch plans to do), we don't have to revisit the open-coding. Second, our assignment to arg->name is fishy: the generated QAPI code for qapi_free_NbdServerAddOptions does not visit arg->name if arg->has_name is false, but if it DID visit it, we would have introduced a double-free situation when arg is finally freed. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201027050556.269064-4-eblake@redhat.com>	6 years ago
Eric Blake	9812e7125b	qapi: Add QAPI_LIST_PREPEND() macro block.c has a useful macro QAPI_LIST_ADD() for inserting at the front of any QAPI-generated list; move it from block.c to qapi/util.h so more places can use it, including one earlier place in block.c, and rename it to something more obvious (since we also have a lot of places that append, rather than prepend, to a list). There are many more places in the codebase that can benefit from using the macro, but converting them will be left to later patches. In theory, all QAPI list types are child classes of GenericList; but in practice, that relationship is not explicitly spelled out in the C type declarations (rather, it is something that happens implicitly due to C compatible layouts), and the macro does not actually depend on the GenericList type. We considered moving GenericList from visitor.h into util.h to group related code; however, such a move would be awkward if we do not also move GenericAlternate. Unfortunately, moving GenericAlternate would introduce its own problems of declaration circularity (qapi-builtin-types.h needs a complete definition of QEnumLookup from util.h, but GenericAlternate needs a complete definition of QType from qapi-builtin-types.h). Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201027050556.269064-3-eblake@redhat.com> [eblake: s/ADD/PREPEND/ per suggestion by Markus]	6 years ago
Eric Blake	159f844238	block: Simplify QAPI_LIST_ADD There is no need to rely on the verbosity of the gcc/clang compiler extension of g_new(typeof(X), 1) when we can instead use the standard g_malloc(sizeof(X)). In general, we like g_new over g_malloc for returning type X rather than void* to let the compiler catch more potential typing mistakes, but in this particular macro, our other use of typeof on the same line already ensures we are getting correct results. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>	6 years ago
Max Reitz	cb7223ac33	iotests/291: Stop NBD server nbd_server_start_unix_socket() includes an implicit nbd_server_stop(), but we still need an explicit one at the end of the test (where there follows no next nbd_server_start_unix_socket()), or qemu-nbd will linger until the test exits. This will become important when enabling this test to run on FUSE exports, because then the export (which is the image used by qemu-nbd) will go away before qemu-nbd exits, which will lead to qemu-nbd complaining that it cannot flush the bitmaps in the image. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027164416.144115-3-mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>	6 years ago
Max Reitz	b4af1df08f	iotests/291: Filter irrelevant parts of img-info We need to let _img_info emit the format-specific information so we get the list of bitmaps we want, but we do not need anything but the bitmaps. So filter out everything that is irrelevant to us. (Ideally, this would be a generalized function in common.filters that takes a list of things to keep, but that would require implementing an anti-bitmap filter, which would be hard, and which we do not need here. So that is why this function is just a local hack.) This lets 291 pass with qcow2 options like refcount_bits or data_file again. Fixes: `14f16bf947` ("qemu-img: Support bitmap --merge into backing image") Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027164416.144115-2-mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>	6 years ago
Peter Maydell	9a2ea4f4a7	Pull request trivial branch 20201027 -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl+YSvsSHGxhdXJlbnRA dml2aWVyLmV1AAoJEPMMOL0/L748yAYP/ivoDVUTf42I0kEg+JfM3RcM6YfXuckD xTYk1v4YBzYJRo/zSEdaBnZsVpN/ntxqfQmTvvb4TXYUZxxpZJeFmxeoAYM/JmlO KYk+jrJNRmohtY8SytW79F2rwfnR4MUYB6vEeqsRoBsPBcPhBEA9kIihiGje7lfW o8wDHb1rwUB2h+yo2FSy+2K2SIdBcWkczIto3dNANGTUJykbmxZ0xKW7wXhvGfTw oBrY0EFeVxZv76EEf743qKSXps4pzR4KrV+faeKGTKWftz/1SliVRARNpCB2oLur buU2dvD7mKDB2JnygNuSXRelnCzObbfGZa51aUpQPE6XJ3G4kZ4mGW8WouPwmlyO OKJ0xQwoq4QXfZEoOBPC1i5zaBhYWQ5gzjgobnQbXSY+NvOxFOntXkS79dm0K5Jn DQyvRgmkFsx2m6AHDXLDtVlK40xid4te8WpJMDvE7FBE9XRLEbqOdTUTLXe/R1k8 VEoi+rotZLT7JypQHMhtJ54Q8EyI5UZbQTIJHrK2+y0P+a8Mw0A6uScKT5tAvU2j NQbIfziUKtCzA0MYdn5MBFwx/qxjyl5PHxGCmVRiu+SeK1nAq62NiYg6RLszT4pc 6PmnyC7QY2cDyFb5BShNu0vn3KBTmNWqBtvj9BsCsxzTp5XPoiS+A8YMpT/Qz/6a Z9qOi7FKMDZ6 =lZON -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Pull request trivial branch 20201027 # gpg: Signature made Tue 27 Oct 2020 16:29:47 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: CHANGELOG: remove disused file qdev: Fix two typos scripts/qmp: delete 'qmp' script cryptodev: Fix Lesser GPL version number io: Fix Lesser GPL version number cpus: Drop declaration of cpu_remove() Makefile: Add *.[ch].inc files to cscope/ctags/TAGS elf2dmp: Fix memory leak on main() error paths Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	5 years ago
Peter Maydell	c99fa56b95	Block layer patches: - qcow2: Skip copy-on-write when allocating a zero cluster - qemu-img: add support for rate limit in qemu-img convert/commit - Fix deadlock when deleting a block node during drain_all -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAl+YOT8RHGt3b2xmQHJl ZGhhdC5jb20ACgkQfwmycsiPL9YBPw//eAhI/entLtuhhGNgOq4ULmRgL5qrA/jU Cuel9/xoMsNSmh7hCa5ZSR39Wy4ZbqrTwnJZBSVGetg+v/6R1bvsDKpCKvAgFi14 bsZikgCHILB8oMWue80pTD+FF3SOoyv2C7uPjGM84EZNHRK5herW5qI2XXQWlV+G PMW9ZgWyYLNoD+D23DZfTusmLVC1PkuVlDahhYj1mNHpLbEqYd9RQBkt+ONhbm1X Ra6xcbRdL5jzLsb6DNRWUglO+mteNET58VVGdsB2Z4Qu0n+QQtnRl4SaatN0WsSY 5IEbHSOWC40NJQIhluxfcYHnSdPoNfTEyOC6wIb+BaFkZXV99sCYzZh1Gt+jRVM3 WEO47C1HCQ65c3aJcoVw0XC3Bm8MpfNU0DYa7O7hVEcmIA8de3N3yHDusHy552Pm FMFThGjkuKaRnA59BLCkNBXBgsqXbAzP6TxroBFVcKCEmM89On8ejAJOP0uig6Fq REqVnCny+0ESRPgw936IGwFHiL2MeRsbqam1TaHcvtgmUX3eMAOIW3xo85F1vziw d8XxC7vVcDwL2xn6sCD/E2UVhFHQQnZAEs4OTsW0R9FkM2u0PAR4jiiPsKpm+VQb /wJatDmAAQfVD8SJbsNDJEercWsUdtSEYrPq/rD0e2KaiEUQg6teyJxeVr2r1rq2 d5n4cwXpkYQ= =ON5g -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging Block layer patches: - qcow2: Skip copy-on-write when allocating a zero cluster - qemu-img: add support for rate limit in qemu-img convert/commit - Fix deadlock when deleting a block node during drain_all # gpg: Signature made Tue 27 Oct 2020 15:14:07 GMT # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: block: End quiescent sections when a BDS is deleted qcow2: Skip copy-on-write when allocating a zero cluster qcow2: Report BDRV_BLOCK_ZERO more accurately in bdrv_co_block_status() qemu-img: add support for rate limit in qemu-img convert qemu-img: add support for rate limit in qemu-img commit Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	5 years ago
Peter Maydell	d03e884e4e	IDE Pull request -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+ber27ys35W+dsvQfe+BBqr8OQ4FAl+YMbcACgkQfe+BBqr8 OQ5drg//aYgqbOhJ5GPKkz/0PDGZXXnUO9ytU7agkMjJBjfYAWSmZ3pQkQvRdRTD KZJiF+noCvsRJFhAHTbujTTvbsVp7RnC1pMMO34EAgmZZYisXxgotw4hjxw+UXQx nXCrTNOElUZjGrdcs1nksUfGX9CIi+QW9JxyiDg9jxUrvqPkPdxm2WFSRL6wtgHQ +OsD1HLQ2PnkAlsEkp+1EPio/SZ25fIVLamg7ujrdufNYT4bJJEOOQZX9B4ifAOf GjRiAF0GjiLRWXu/YUgbz5tnfQUrTTsmhWkEsnM+t6FFSk4nQEQ/8T3fi7Kw26VB JZGzKlMqLkpFOZ2akLNqZ/bjSnhjEVQyeSqG0b6EM1y8HO7V5F4GUvA1hnJeD50s 5MPbtZqqN8ZkkQBaX251MxtKBccdZzdt+ePuxb0/LhgKwqqKVlTegro5mJ3YDLkY EoMQe/KOLA8WiKcmPkJ9NO0yycalm5dQWGxamx0ZskUksnCGSaLnyrhB5z/BMrQw +EcGzLo2WbJYa6pHfZer0sXy5MNWLwWo10KMzQsvlb/vFtcyET8oeAWQmnzX69go QsAalo2tKVRNdztpkrvPWaz1opo4rxca+5KKAyGE37HOa3FCqyGHGuIRCkzRthZF 4/eqgSFjfyJuh/HkUIUcW9pBBjza8dgfyOjt9Z1+edOlG4CG+ck= =9TNX -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/ide-pull-request' into staging IDE Pull request # gpg: Signature made Tue 27 Oct 2020 14:41:59 GMT # gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full] # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jsnow-gitlab/tags/ide-pull-request: ide: clear SRST after SRST finishes ide: perform SRST as early as possible ide: run diagnostic after SRST Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	5 years ago
Peter Maydell	a19d4bc452	ppc patch queue 2020-10-28 Here's the next pull request for ppc and spapr related patches, which should be the last things for soft freeze. Includes: * Numerous error handling cleanups from Greg Kurz * Cleanups to cpu realization and hotplug handling from Greg Kurz * A handful of other small fixes and cleanups This does include a change to pc_dimm_plug() that isn't in my normal areas of concern. That's there as a a prerequisite for ppc specific changes, and has an ack from Igor. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl+YKwEACgkQbDjKyiDZ s5LNmg/+J/nKfe494WPSDhOgpQNz4NJD1GZUOsADwuvDPQWmMdl4dY3MKd+ipN1X HYmor7t+A5cvtm5zS0sHEZR/lg9qz3Oqc1nWpR+IJ7JmZMlmPbCKc6Iah4R1rQgA N17C2LSdBXGN84cmi3B0IbMPxpogFM7SqiSG7T4QIy7nZ/gm/aYwejVs+lLA7vjl hZmRnX76GE8fU0SzzmvIKTYwIqPbaZELP4LDmzKczdsWKvwOfeyUEp2loZ+xtyzc s1ecJTaTRcgaiB5Ylu10Bv5/L07P4YxV2lMhd8WJqq6Ki/fdUIeVyP6lnZyTQVkj YxtfrFsObVjNkHl8JtXG07QoQkGvkJLXGNyoPoCQy8ZEahYjjwP88UltAhENCllY uDtR6fLj0YnpHu9gW1onGpkxjI93QaiWA0ePoF/z1gQ8E6G3vwSmI4h5FC4UHNv5 NNtHIJNgFj1icf8C8lyh5DBNqYNt8FFTS2iAmtl7eDbWcaDj1+fZWXQHqJS1CUI1 P8d2TNJXEyJ7fxfzk56LovdwvLs4/fLb4Lu5loi5CC4JPaYiwC7dEbhRPsxq8F++ l9gwfnnKo1WYkx8Y3PZEpXcoypCOGQToVAi519lx8YfRYeFTIXrR8vqOAfpeQpXY 9tktUFMgFZDoJl/Jc81enMjWy+mnmcIPfFR12vZ2LIR3X0tHE/g= =igPS -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20201028' into staging ppc patch queue 2020-10-28 Here's the next pull request for ppc and spapr related patches, which should be the last things for soft freeze. Includes: * Numerous error handling cleanups from Greg Kurz * Cleanups to cpu realization and hotplug handling from Greg Kurz * A handful of other small fixes and cleanups This does include a change to pc_dimm_plug() that isn't in my normal areas of concern. That's there as a a prerequisite for ppc specific changes, and has an ack from Igor. # gpg: Signature made Tue 27 Oct 2020 14:13:21 GMT # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-5.2-20201028: ppc/: fix some comment spelling errors spapr: Improve spapr_reallocate_hpt() error reporting target/ppc: Fix kvmppc_load_htab_chunk() error reporting spapr: Use error_append_hint() in spapr_reallocate_hpt() spapr: Simplify error handling in spapr_memory_plug() spapr: Pass &error_abort when getting some PC DIMM properties spapr: Use appropriate getter for PC_DIMM_SLOT_PROP spapr: Use appropriate getter for PC_DIMM_ADDR_PROP pc-dimm: Drop @errp argument of pc_dimm_plug() spapr: Simplify spapr_cpu_core_realize() and spapr_cpu_core_unrealize() spapr: Make spapr_cpu_core_unrealize() idempotent spapr: Drop spapr_delete_vcpu() unused argument spapr: Unrealize vCPUs with qdev_unrealize() spapr: Fix leak of CPU machine specific data spapr: Move spapr_create_nvdimm_dr_connectors() to core machine code hw/net: move allocation to the heap due to very large stack frame ppc/spapr: re-assert IRQs during event-scan if there are pending spapr: Clarify why DR connectors aren't user creatable Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	5 years ago
Peter Maydell	802427bcda	target-arm queue: * raspi: add model of cprman clock manager * sbsa-ref: add an SBSA generic watchdog device * arm/trace: Fix hex printing * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+ * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support * hw/arm: fix min_cpus for xlnx-versal-virt platform * hw/arm/highbank: Silence warnings about missing fallthrough statements * linux-user: Support Aarch64 BTI * Armv7M systick: fix corner case bugs by rewriting to use ptimer -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl+YBA4ZHHBldGVyLm1h eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rWRD/9hqjzL4d7xKcFQdQdRXsxv 7zX82arHdxg9pNvusie/tuhX0PLswQ8TPEHEBVQvngxF7y/HqLBFuZAQvFf4ou6R 9+myTXE2RuWHOYKlrr/M6p4csABXNMm7PiA3VMeKcTEh4DoamLyBz6j1X4obPiA+ tLaRw4azzYAZnHoCaF6BX+4uf4bQZoqAtAS4IodJAAbDXJStl0VUFoS34MPhgW6/ dwGF8DbQJVYRqa7xEXck4Yx7dkx13I66+iYUf9kCyoCkdyz1sIq58fbKhXQP4lqN I3e5XGBVJfeku7w/TGOpsw8OCyTng0z636iglfLVOrsj5N03fT8j72ehY7jJsN9f CgHvQ1JAX1DvA/v23oxs3WccwAOfJJsOERtf9QxyMbTR1czCeIY1LYMnkOFtyL87 6IQpwM0WF1z4lja0dmrvhKJWjqn+kVI2cDtxrprsulCHi+pcIdJMq8vJDfxjpqqe SnDXVSAn8KjBrClaJRqHfbi+5ggsTwsLpBtEToQ4AOR342XVRfEY8IfTLb1D2+6q z99BFiyJtZ6iiJq5jgGMhppN6tEuHFK7Vr6IwhGDgFTchWb6by+K3i8/VzrbWVk9 O+KEeO92dg6jVd+6FyXOPnJ3DcUXEp6EVUVrKBBUC+LTU8Lf1MCgeprjSi87UHIX xQg635uOQU3gxkqxCaE0XA== =OFlu -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging target-arm queue: * raspi: add model of cprman clock manager * sbsa-ref: add an SBSA generic watchdog device * arm/trace: Fix hex printing * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+ * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support * hw/arm: fix min_cpus for xlnx-versal-virt platform * hw/arm/highbank: Silence warnings about missing fallthrough statements * linux-user: Support Aarch64 BTI * Armv7M systick: fix corner case bugs by rewriting to use ptimer # gpg: Signature made Tue 27 Oct 2020 11:27:10 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20201027-1: (48 commits) hw/timer/armv7m_systick: Rewrite to use ptimers hw/core/ptimer: Support ptimer being disabled by timer callback hw/arm/sbsa-ref: add SBSA watchdog device hw/watchdog: Implement SBSA watchdog device hw/arm/bcm2835_peripherals: connect the UART clock hw/char/pl011: add a clock input hw/misc/bcm2835_cprman: add sane reset values to the registers hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer hw/misc/bcm2835_cprman: implement clock mux behaviour hw/misc/bcm2835_cprman: add a clock mux skeleton implementation hw/misc/bcm2835_cprman: implement PLL channels behaviour hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation hw/misc/bcm2835_cprman: implement PLLs behaviour hw/misc/bcm2835_cprman: add a PLL skeleton implementation hw/arm/raspi: add a skeleton implementation of the CPRMAN hw/arm/raspi: fix CPRMAN base address hw/core/clock: trace clock values in Hz instead of ns hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro arm/trace: Fix hex printing hw/arm/raspi: Add the Raspberry Pi 3 model A+ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	5 years ago
Peter Maydell	c044400914	QMP patches patches for 2020-10-27 -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl+X8qwSHGFybWJydUBy ZWRoYXQuY29tAAoJEDhwtADrkYZT8k0P/0AXcoP/clFP0x+TBlcPpk2YPFSS6BnA yIngvKMIKoIxekHtW3ukNANKIynWy2d3u7aD/c8aCLJtioWIZqzmBCW5zC/oYFyO DvOCnXzAK1T/9wy4sswaOjSVeqfI5dsMJKNvYVouXGs0+kYy74k7vtWx5OdjrV4D w4KVyGc5tos9RAafcYl7jYKFDfkYy2+5rZWorIuEG1P6GAjdXMl4r6ako+pbpzW2 g1gbG/Kau9L4MfZR2wvtzblm5Ve+Mf/XivxKdUiHG/MdI9NWrRA033xCQWmrEoQw teeBzVlHHvw9xF5vaqFlYySs+WK9Ou6Q4h0Nc4WNYw6eWPMNog8T/vi2y9Ra+at/ 3gAR0GRrfpd/RXqhFh9xwbEe9n0KzodAA+eGAnT/f2+9CoQHLm436cgzk+Vtasn1 6yFmBwxFnBQeaApAb3oARmXAQrI2hdQBNmxLB1BZuUDKNHrpyZp3Xeh/uTW6PthH 3COdYpzNBeBYaLfcF46wvIIfbQJTrI9WrSuJBN/1oLsm0oxtDnBmgIv0Vij4QLl6 uymPd+RXK3GCj51+6DnccUW6+5YManwdSHMcepOtlXsnXdVVt1t2VkhfyiECOWpA Gd2wBRLCiq810Laf2ywx8OKt7/6ujAE8ksUpAE8fY1MsUBQlzNA/Z/HKsTpXa6ZW nkwPtrz9YHu3 =yTrz -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/armbru/tags/pull-qmp-2020-10-27' into staging QMP patches patches for 2020-10-27 # gpg: Signature made Tue 27 Oct 2020 10:13:00 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qmp-2020-10-27: scripts/qmp: delete 'qmp' script qmp-shell: Sort by key when pretty-printing Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	5 years ago
Peter Maydell	a5e7fb4d20	Testing and gitdm updates - add some more individual contributors - include SDL2 in centos images - skip checkpatch check when no commits found - use random port for gdb reverse debugging - make gitlab use it's own mirrors to clone - fix detection of make -nqp -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl+X7qsACgkQ+9DbCVqe KkSpmAf/To0P/c/B6qMEvNfCiWtn/Nuypau8W60q/ZvE/J4IzFarwa5uc7COmyNR xjvxdoeKp17ykFdwBzGhiKeO83SO8DUH1JmzA6STs4RH5VSFGYycuE0cQ9KugrpE 4yOruOdEgAn2+35oYalE9u6/EugdIVBZsjMS/ofsgR9ysYPuju4Q9by6DEK6ArW0 AmdwJzKAYw75v+D2wKNq9coSWvbqWClsV6j0gaKgn+OQYqWo25T/DzWdr1okCRET TvB0HZLCDQHz9Friq5PtBtVsmNbZaL+CM9RRekFBGUFEvZE8i4VEDHFfzXsN3U0w VA5yhlBJzl1/prBQe1qRbrZQL4x58w== =Bnt1 -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-271020-1' into staging Testing and gitdm updates - add some more individual contributors - include SDL2 in centos images - skip checkpatch check when no commits found - use random port for gdb reverse debugging - make gitlab use it's own mirrors to clone - fix detection of make -nqp # gpg: Signature made Tue 27 Oct 2020 09:55:55 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-and-misc-271020-1: makefile: handle -n / -k / -q correctly gitlab-ci: Clone from GitLab itself tests/acceptance: pick a random gdb port for reverse debugging scripts: fix error from checkpatch.pl when no commits are found gitlab: skip checkpatch.pl checks if no commit delta on branch tests/docker/dockerfiles/centos: Use SDL2 instead of SDL1 contrib/gitdm: Add more individual contributors Adding ani's email as an individual contributor Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	5 years ago
Peter Maydell	bbc48d2bcb	Renesas patches (SH4 and RX) - Fix few warnings (Thomas Huth) - Fix typos (Lichang Zhao, Chetan Pant) CI jobs results: . https://cirrus-ci.com/build/6368903343374336 . https://gitlab.com/philmd/qemu/-/pipelines/207919103 . https://travis-ci.org/github/philmd/qemu/builds/739133105 -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAl+XW2sACgkQ4+MsLN6t wN5Z+RAAtkD1zbjh3w0zC4kM6npJYpyvIruhQRqpHnHrgTqN6nzmxYquMprRHliI kgiSO6W2nNCqFWnFXBuve82NeWQhhyMZGA4iggCy45a6W/j5t8bfPRdWeFHQjd0O kfakFlB+IFU5lQ2BroRe44IcmGkCMMtuRYK/HCvHZz1a058AOfBpr0egi6cZOXas DEMJNw+FFhcWb6DUaDl0iPKKawzH7GhMkrpVLzWbUd4rrIwzYjDU5w7yp5f1GXG0 63vCO/3vUAmi8cKzTluKBN4pQhzC+lWNCm9MGUVbunHfPWZImfkdnrwJPE95hwuT Dx9WVEsX6P6y3/pN5q7a9J0IdP6BUqIem+yhT4QOWvfoBl/MqqtgwfJh/AcYrrdz LHmQpHyw1aDxWGP4CODdeuTaIA216I6YJosFYb/JHoh2Gw3CUunMsQPZCXz+srQG p+1MZMHPF4A1cElSvX9dtxWxXrHcqZoKOKK6bu9Q6tHSXJ26DMkY35neS7+hBe9B QRdT58DgnR0dBjaF+SGXe/EWqIq0xBNsvwuxZ+gD0sefh+nDyAVnBpYdOERNFY0O 10FWY9yuEYjDAQK0mmjkMbp9xfgQ3YtRCoVAt/YOWBl4nWDlNagX4iSwBvR0i8Xg DtOX7haw3XCQvP2j1pbhbjYXosab/sjxcWo7SrPdNGd7cU74jzY= =dMmS -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/philmd-gitlab/tags/renesas-20201027' into staging Renesas patches (SH4 and RX) - Fix few warnings (Thomas Huth) - Fix typos (Lichang Zhao, Chetan Pant) CI jobs results: . https://cirrus-ci.com/build/6368903343374336 . https://gitlab.com/philmd/qemu/-/pipelines/207919103 . https://travis-ci.org/github/philmd/qemu/builds/739133105 # gpg: Signature made Mon 26 Oct 2020 23:27:39 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/renesas-20201027: target/rx: Fix Lesser GPL version number target/rx: Fix some comment spelling errors target/sh4: fix some comment spelling errors target/sh4: Update coding style to make checkpatch.pl happy hw/timer/sh_timer: Remove superfluous "break" statements hw/timer/sh_timer: Silence warnings about missing fallthrough statements hw/timer/sh_timer: Coding style clean-up elf: Add EM_RX definition Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	6 years ago
Peter Maydell	5c27a85518	Update syscall numbers to 5.9-rc7 Fixes for prctl(), accept4() and xtensa -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl+XR5ASHGxhdXJlbnRA dml2aWVyLmV1AAoJEPMMOL0/L748liYP/j5YV8smHIK9gO3Vnn9tHAE82cgakyt+ /GZUUUA8N5b3NQdNtHIiT3BMQFCESUiF3JPfcD+95CE4/yl9LW5fGFMygxb8e6U1 BVei0Ggb69E5/+r+zWd1leGXa0t7ZHzLlOEwAjAwW4MQR3SXOYdM/q87HAbI6p/b wLOcJih5ZD3eCvC3XR99xfcWn0rIjDTuYgH9dXbEJxAHpaa/rH2auPU6i9DWxprn lgz8RsSFEfG9CJg/BLK+w3CtL9ndeSykFf/HO7GokHVzDM0mEKBpFWFx4y6Nkiq6 Qaq0qj8jgZeQjWXog3YLrUna6EzkuHxmtbyOsfi9tdaqZay6xedDuREPfZ9GHHLT gdyX6tXVt3Qiot3P3P6RQwCU+iOMHpwRsaBnXJQnDkck7piNwUfWX5j6t8lqbWLB kKyTYRBLrhmxC9Tjq8dZZrQGXOrG38fkL+yg4S+xr7+ju9CKEtHk7Y4/knwkevIi gE1cuj9C0uhqGLoHZPYsawhFy6OMzuZQ5LaAEV7TH6cumSgLXbqWsw/xPoHtb3/1 mE/vnOD1ArDAiInIVXImPUNF3I6pzSJR8IcKVW9BEMNjMZApMWVis65Owmyy0dic RSBF8WGUy4Xp9YLTXW1jQJWx9wHbqqN4cbQjzFLv+4ZDdjXHLYyjGGefhchUOJ+N Zvedbmlv0ROZ =7TIT -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.2-pull-request' into staging Update syscall numbers to 5.9-rc7 Fixes for prctl(), accept4() and xtensa # gpg: Signature made Mon 26 Oct 2020 22:02:56 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-5.2-pull-request: target/xtensa: enable all coprocessors for linux-user linux-user: correct errno returned from accept4() syscall linux-user: remove _sysctl linux-user: update syscall.tbl to Linux 5.9-rc7 linux-user: update mips/syscall-args-o32.c.inc to Linux 5.9-rc7 linux-user: update syscall_nr.h to Linux 5.9-rc7 linux-user: Support f_flags in statfs64 when available. Fix stack smashing when handling PR_GET_PDEATHSIG Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	6 years ago
Alex Williamson	33dc9914ea	Revert series: virtiofsd: Announce submounts to the guest This reverts the following commits due to their basis on a bogus linux kernel header update: `c93a656f7b` ("tests/acceptance: Add virtiofs_submounts.py") `45ced7ca2f` ("tests/acceptance/boot_linux: Accept SSH pubkey") `08dce386e7` ("virtiofsd: Announce sub-mount points") `eba8b096c1` ("virtiofsd: Store every lo_inode's parent_dev") `ede24b6be7` ("virtiofsd: Add fuse_reply_attr_with_flags()") `e2577435d3` ("virtiofsd: Add attr_flags to fuse_entry_param") `2f10415abf` ("virtiofsd: Announce FUSE_ATTR_FLAGS") `97d741cc96` ("linux/fuse.h: Pull in from Linux") Cc: Max Reitz <mreitz@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 160385090886.20017.13382256442750027666.stgit@gimli.home Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	6 years ago
Peter Maydell	cddfbe0774	API to model LED. CI jobs results: . https://cirrus-ci.com/build/4879251751043072 . https://gitlab.com/philmd/qemu/-/pipelines/207661784 . https://travis-ci.org/github/philmd/qemu/builds/738958191 . https://app.shippable.com/github/philmd/qemu/runs/891/summary/console -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAl+XR88ACgkQ4+MsLN6t wN4Org//UPv8cTDvJwsS2vaw0CRHQmU7/t2hI6xN1mDMFaUDwj6AjtdO6W3FUOcV KQbwFP16Po684h4xhDayUs15RcPz/mCSaiiz4WkS3sA5M0y0SWQE+1HgvGZwrEXn o5j8Lilh8m4/WE97Q7hVPD2cesMv9W3EziWBMEqukaXCSnTfAURiUUWmXpu7jyQ8 tc439KhFXnLx6Gx/XyPoN2CLfC5q1OReGTGvAP2GqFDPxPnIAGyqHLaVOZBXlX3a PsRl9HKvuPL86zrSXLRqsnUiiQ5vHg0Quw4jntd+ZF+V97Qlg01x0BuxI2+9GqO4 b/RVBbvrLdWEpmKffr6EsmNNLaREeTfjQWVowD2uy3IK6JxkG7oiljAj7sDySSzs WYo8PCE/xpTtrtbLZNtRkkz3Ui/h0Qjdvi8oS/8k84/0/+fDufWekXz1pX6YZ4jI 2GK+aa/OrTZQh5uUYdzQPxf0ieviOVCSf0IgKvHkOlAqnZIQRkFmtIOdPyNlctQx cGNMT9pgz+n4g1ge9LaBlyAMwxCGkU5nygbbPyYHGZyN8xiDNUKOAMRhXgLiKpXb tbseixu4TDGr2iuc291G9dkeKbPkxeIE3NIbFwcB4UtTftxLko7pTZ5l3G0jvUt1 VCfK1ot6DKO8B+TzXyIgAWiZmWSV8KhHA4EkX4BihqLL3hIvlNk= =inaF -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/philmd-gitlab/tags/led-api-20201026' into staging API to model LED. CI jobs results: . https://cirrus-ci.com/build/4879251751043072 . https://gitlab.com/philmd/qemu/-/pipelines/207661784 . https://travis-ci.org/github/philmd/qemu/builds/738958191 . https://app.shippable.com/github/philmd/qemu/runs/891/summary/console # gpg: Signature made Mon 26 Oct 2020 22:03:59 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/led-api-20201026: hw/arm/tosa: Replace fprintf() calls by LED devices hw/misc/mps2-scc: Use the LED device hw/misc/mps2-fpgaio: Use the LED device hw/arm/aspeed: Add the 3 front LEDs drived by the PCA9552 #1 hw/misc/led: Emit a trace event when LED intensity has changed hw/misc/led: Allow connecting from GPIO output hw/misc/led: Add a LED device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	6 years ago
Peter Maydell	cfc1105649	Acceptance testing patches - More ARM tests - Documentation update CI jobs results: . https://cirrus-ci.com/build/5754555684093952 . https://gitlab.com/philmd/qemu/-/pipelines/207807648 -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAl+XHkwACgkQ4+MsLN6t wN4WJBAAxfsfZV3DjoKP/mAjVKJCHkA82MzzoN+YH5WQs4QG1Hytod7OyWC101xj wPuL85NR+bo+he12Uylmbm35TCyKxH3kOk2GAqiHvS16mxNZtAssehVt5a1hoUlw N9R37dtccGbURX3WzEgJralaZaST96ZbP+y76A95ygriXLnZRisVJG0t/FKBb22m 8B8+lgHpb11hFop/COY93Aa/BPx9S7cPpBQX4p8e/gXhdJTtqzbhWYSkLO60FqJh l1D8KAB7dUtVPoW1ZPSL0YsSGVlxKslOQ8T2Ikrhu8whDZNpYWaoXP0nK3aFK5Th jSYObXj/fXtj+APJZILoYAzEtlFsX0FFPfPZy2ffvX6+P1S4COsU2mkN9jJSu42C i8Ii5r1WAN6OPFbgPVQ2tQP9jq+scwBUT50GIzgLvja2dWPBM7drxB/hAByItgRt ARaDupnC6ShXPLMPm14fSfThyQQw+wiTHo9sZaks5NuoOz9WAh6XUK3JLR5S5zEG OxYunho2zSoqYAmnYtymNQ3L0ABW679EbbB2uZJX9m4iFGSxnNJoFFZyAXsZm/tM sRQBfTdBH1OCsVdy9/uYrNdZmj0QMBU5mJmv8Qsv722PLV8GuBF8O64C4F4Y42BP ApADllyRIONxXm95iBXISuZAF7qAMfGcvI9ldpUyetUT59oz4YI= =5Xi7 -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/philmd-gitlab/tags/acceptance-testing-20201026' into staging Acceptance testing patches - More ARM tests - Documentation update CI jobs results: . https://cirrus-ci.com/build/5754555684093952 . https://gitlab.com/philmd/qemu/-/pipelines/207807648 # gpg: Signature made Mon 26 Oct 2020 19:06:52 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/acceptance-testing-20201026: docs/devel/testing.rst: Update outdated Avocado URLs tests/acceptance: Allow running Orange Pi test using cached artifacts tests/acceptance: Add a 'virt_kvm' test using the GICv3 tests/boot_linux_console: Boot Trusted Firmware-A on the Raspberry Pi 3 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	6 years ago
John Snow	e83029fa60	CHANGELOG: remove disused file There's no reason to keep this here; the versions described are ancient. Everything here is still mirrored on https://wiki.qemu.org/ChangeLog/old if anyone is curious; otherwise, use the git history. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20201026195131.13848-1-jsnow@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>	6 years ago
Maxim Levitsky	5dae6fad94	qdev: Fix two typos Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201019163702.471239-2-mlevitsk@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>	6 years ago
John Snow	5057bf9581	scripts/qmp: delete 'qmp' script This script has not seen a patch that was specifically for this script since it was moved to this location in 2013, and I doubt it is used. It uses "man qmp" for its help message, which does not exist. It also presumes there is a manual page for qmp-XXX, for each defined qmp command XXX. I don't think that's true. The format it expects arguments in is something like: block-dirty-bitmap-add --node=foo --name=bar and has no capacity to support nested JSON arguments, either. Most developers use either qmp-shell or socat (or pasting JSON directly into qmp stdio), so this duplication and additional alternate syntax is not helpful. Remove it. Leave a breadcrumb script just in case, to be removed next release cycle. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201019210430.1063390-1-jsnow@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>	6 years ago
Chetan Pant	0dda001b3a	cryptodev: Fix Lesser GPL version number There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201014133722.14041-1-chetan4windows@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>	6 years ago
Chetan Pant	c8198bd5f9	io: Fix Lesser GPL version number There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20201014134033.14095-1-chetan4windows@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>	6 years ago
Greg Kurz	c5af3c0d85	cpus: Drop declaration of cpu_remove() cpu_remove() got superseded by cpu_remove_sync() in commit `dbadee4ff4`, but its prototype wasn't removed. We could possibly keep the shorter cpu_remove() naming but it seems better to highligth that this blocks until the CPU thread is joined. Fixes: `dbadee4ff4` ("cpus: join thread when removing a vCPU") Cc: pbonzini@redhat.com Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <160268285707.1107461.15035929822602623985.stgit@bahia.lan> Signed-off-by: Laurent Vivier <laurent@vivier.eu>	6 years ago
Greg Kurz	018da27970	Makefile: Add .[ch].inc files to cscope/ctags/TAGS The code base has some C source and header files that don't get indexed because their name ends with .inc: $ git ls-files ".[ch].inc" \| wc -l 66 Add them to the list. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160258069310.900922.1495166540282536628.stgit@bahia.lan> Signed-off-by: Laurent Vivier <laurent@vivier.eu>	6 years ago
AlexChen	885538fdc9	elf2dmp: Fix memory leak on main() error paths The 'kdgb' is allocating memory in get_kdbg(), but it is not freed in both fill_header() and fill_context() failed branches, fix it. Signed-off-by: AlexChen <alex.chen@huawei.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <5F463659.8080101@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>	6 years ago
John Snow	1a9925e339	ide: clear SRST after SRST finishes The SRST protocol states that after diagnostics are complete and the status is posted, we should clear the SRST bit if it should so happen to be set. The reset method itself should handle this, but just in case -- make our intention explicit here. Signed-off-by: John Snow <jsnow@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20201020200242.1497705-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	6 years ago
John Snow	b45bcd81e0	ide: perform SRST as early as possible We don't need to wait for the falling edge. We can set BSY as soon as possible and begin immediately resetting the drive. Devices don't appear to need to take any specific action on the falling edge. Signed-off-by: John Snow <jsnow@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20201020200242.1497705-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>	6 years ago
John Snow	4ac4e7281a	ide: run diagnostic after SRST Software reset (SRST) should cause the diagnostic command to be run. Make an explicit call to that routine. Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20201020200242.1497705-2-jsnow@redhat.com Fixes: `55adb3c456` Fixes: https://bugs.launchpad.net/bugs/1900155 Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: John Snow <jsnow@redhat.com>	6 years ago
Peter Maydell	725ca3313a	virtiofsd pull 2020-10-26 Misono Set default log level to info Explicit build option for virtiofsd Me xattr name mapping Stefan Alternative chroot sandbox method Max Submount mechanism Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAl+XGGAACgkQBRYzHrxb /efeDw/8Dz+yKjdV0mqzdOJ/2lg4etlDRqG7P65W9G79ZIthAOZVIH5p3yv+qzdN a+QTGWquCA/gCCfl29QHU2zC78PcBjP/ugm6icqW126MmJmHR/rOZx+RYC+0W4+0 2YA2HzwtKpolrMuzKoddHwsYoIF2Uw6l1oZK1QOl1hjqL2q47VRDvCs6H7vpvGn1 dGd+xkXMSYCVL4Lq+zAaIg6ZfTtCIlwJ+LMCoT/Wy7eZeB338T9Bz5iLl7BTqF2x GBv2eDw0xibYw+3d8zX9k76irKdLYPgJiaskjsGNWxLgtSYEOmCrDPzIMDbe34lS u4JlqRdmc62YoE5X1oI6tF8XSaD+O/PS1CT9O9IttDuHNVctg0zCqjTxONJn9IQk CmszvoGScnaH4PqWueR47wDjKdFq8p5nryODtmuYILjvAXPYJp0Vt6JDJ6ZZcS+t YwRYltCK7ToKiteTuosusQ/Vzk2kq4U6znWZsZH1LcyNEVaJNUIoIjYZrxKugG/F yuAeWinoG37N6gwx5GfUoIO/eRd8UyBmKEaeY7RpJfo+UnFpErg4+uEfZ5gbD1/0 YtQmBXHrXnsZB//wTw0gUob0sDKoII21H5EcA4QiDpgci9Q5saL/XG55TDLNZ62d uUH7PbIna8KpoKRBjEzz5e71FBTF0sKshzrZFHjfmhZ9HiM6XeE= =dTCm -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20201026' into staging virtiofsd pull 2020-10-26 Misono Set default log level to info Explicit build option for virtiofsd Me xattr name mapping Stefan Alternative chroot sandbox method Max Submount mechanism Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # gpg: Signature made Mon 26 Oct 2020 18:41:36 GMT # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert-gitlab/tags/pull-virtiofs-20201026: tests/acceptance: Add virtiofs_submounts.py tests/acceptance/boot_linux: Accept SSH pubkey virtiofsd: Announce sub-mount points virtiofsd: Store every lo_inode's parent_dev virtiofsd: Add fuse_reply_attr_with_flags() virtiofsd: Add attr_flags to fuse_entry_param virtiofsd: Announce FUSE_ATTR_FLAGS linux/fuse.h: Pull in from Linux tools/virtiofsd: xattr name mappings: Simple 'map' tools/virtiofsd: xattr name mapping examples tools/virtiofsd: xattr name mappings: Map server xattr names tools/virtiofsd: xattr name mappings: Map client xattr names tools/virtiofsd: xattr name mappings: Add option virtiofsd: add container-friendly -o sandbox=chroot option virtiofsd: passthrough_ll: set FUSE_LOG_INFO as default log_level configure: add option for virtiofsd Signed-off-by: Peter Maydell <peter.maydell@linaro.org>	6 years ago
Greg Kurz	1a6d3bd229	block: End quiescent sections when a BDS is deleted If a BDS gets deleted during blk_drain_all(), it might miss a call to bdrv_do_drained_end(). This means missing a call to aio_enable_external() and the AIO context remains disabled for ever. This can cause a device to become irresponsive and to disrupt the guest execution, ie. hang, loop forever or worse. This scenario is quite easy to encounter with virtio-scsi on POWER when punching multiple blockdev-create QMP commands while the guest is booting and it is still running the SLOF firmware. This happens because SLOF disables/re-enables PCI devices multiple times via IO/MEM/MASTER bits of PCI_COMMAND register after the initial probe/feature negotiation, as it tends to work with a single device at a time at various stages like probing and running block/network bootloaders without doing a full reset in-between. This naturally generates many dataplane stops and starts, and thus many drain sections that can race with blockdev_create_run(). In the end, SLOF bails out. It is somehow reproducible on x86 but it requires to generate articial dataplane start/stop activity with stop/cont QMP commands. In this case, seabios ends up looping for ever, waiting for the virtio-scsi device to send a response to a command it never received. Add a helper that pairs all previously called bdrv_do_drained_begin() with a bdrv_do_drained_end() and call it from bdrv_close(). While at it, update the "/bdrv-drain/graph-change/drain_all" test in test-bdrv-drain so that it can catch the issue. BugId: https://bugzilla.redhat.com/show_bug.cgi?id=1874441 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160346526998.272601.9045392804399803158.stgit@bahia.lan> Signed-off-by: Kevin Wolf <kwolf@redhat.com>	6 years ago
Alberto Garcia	46cd1e8a47	qcow2: Skip copy-on-write when allocating a zero cluster Since commit `c8bb23cbdb` when a write request results in a new allocation QEMU first tries to see if the rest of the cluster outside the written area contains only zeroes. In that case, instead of doing a normal copy-on-write operation and writing explicit zero buffers to disk, the code zeroes the whole cluster efficiently using pwrite_zeroes() with BDRV_REQ_NO_FALLBACK. This improves performance very significantly but it only happens when we are writing to an area that was completely unallocated before. Zero clusters (QCOW2_CLUSTER_ZERO_*) are treated like normal clusters and are therefore slower to allocate. This happens because the code uses bdrv_is_allocated_above() rather bdrv_block_status_above(). The former is not as accurate for this purpose but it is faster. However in the case of qcow2 the underlying call does already report zero clusters just fine so there is no reason why we cannot use that information. After testing 4KB writes on an image that only contains zero clusters this patch results in almost five times more IOPS. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <6d77cab968c501c44d6e1089b9bc91b04170b49e.1603731354.git.berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>	6 years ago
Alberto Garcia	d40f4a565a	qcow2: Report BDRV_BLOCK_ZERO more accurately in bdrv_co_block_status() If a BlockDriverState supports backing files but has none then any unallocated area reads back as zeroes. bdrv_co_block_status() is only reporting this is if want_zero is true, but this is an inexpensive test and there is no reason not to do it in all cases. Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <66fa0914a0e2b727ab6d1b63ca773d7cd29a9a9e.1603731354.git.berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>	6 years ago
Zhengui	0c8c4895a6	qemu-img: add support for rate limit in qemu-img convert add support for rate limit in qemu-img convert. Signed-off-by: Zhengui <lizhengui@huawei.com> Message-Id: <1603205264-17424-3-git-send-email-lizhengui@huawei.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>	6 years ago
Zhengui	a0441b66e8	qemu-img: add support for rate limit in qemu-img commit add support for rate limit in qemu-img commit. Signed-off-by: Zhengui <lizhengui@huawei.com> Message-Id: <1603205264-17424-2-git-send-email-lizhengui@huawei.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>	6 years ago
zhaolichang	136fbf654d	ppc/: fix some comment spelling errors I found that there are many spelling errors in the comments of qemu/target/ppc. I used spellcheck to check the spelling errors and found some errors in the folder. Signed-off-by: zhaolichang <zhaolichang@huawei.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20201009064449.2336-3-zhaolichang@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	a4e3a7c02b	spapr: Improve spapr_reallocate_hpt() error reporting spapr_reallocate_hpt() has three users, two of which pass &error_fatal and the third one, htab_load(), passes &local_err, uses it to detect failures and simply propagates -EINVAL up to vmstate_load(), which will cause QEMU to exit. It is thus confusing that spapr_reallocate_hpt() doesn't return right away when an error is detected in some cases. Also, the comment suggesting that the caller is welcome to try to carry on seems like a remnant in this respect. This can be improved: - change spapr_reallocate_hpt() to always report a negative errno on failure, either as reported by KVM or -ENOSPC if the HPT is smaller than what was asked, - use that to detect failures in htab_load() which is preferred over checking &local_err, - propagate this negative errno to vmstate_load() because it is more accurate than propagating -EINVAL for all possible errors. [dwg: Fix compile error due to omitted prelim patch] Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160371605460.305923.5890143959901241157.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	0a06e4d626	target/ppc: Fix kvmppc_load_htab_chunk() error reporting If kvmppc_load_htab_chunk() fails, its return value is propagated up to vmstate_load(). It should thus be a negative errno, not -1 (which maps to EPERM and would lure the user into thinking that the problem is necessarily related to a lack of privilege). Return the error reported by KVM or ENOSPC in case of short write. While here, propagate the error message through an @errp argument and have the caller to print it with error_report_err() instead of relying on fprintf(). Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160371604713.305923.5264900354159029580.stgit@bahia.lan> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	c3e051ed6d	spapr: Use error_append_hint() in spapr_reallocate_hpt() Hints should be added with the dedicated error_append_hint() API because we don't want to print them when using QMP. This requires to insert ERRP_GUARD as explained in "qapi/error.h". Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160371604030.305923.17464161378167312662.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	6e837f98ba	spapr: Simplify error handling in spapr_memory_plug() As recommended in "qapi/error.h", add a bool return value to spapr_add_lmbs() and spapr_add_nvdimm(), and use them instead of local_err in spapr_memory_plug(). This allows to get rid of the error propagation overhead. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160309734178.2739814.3488437759887793902.stgit@bahia.lan> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	271ced1d62	spapr: Pass &error_abort when getting some PC DIMM properties Both PC_DIMM_SLOT_PROP and PC_DIMM_ADDR_PROP are defined in the default property list of the PC DIMM device class: DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0), DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot, PC_DIMM_UNASSIGNED_SLOT), They should thus be always gettable for both PC DIMMs and NVDIMMs. An error in getting them can only be the result of a programming error. It doesn't make much sense to propagate the error in this case. Abort instead. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160309732180.2739814.7243774674998010907.stgit@bahia.lan> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	581778dd47	spapr: Use appropriate getter for PC_DIMM_SLOT_PROP The PC_DIMM_SLOT_PROP property is defined as: DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot, PC_DIMM_UNASSIGNED_SLOT), Use object_property_get_int() instead of object_property_get_uint(). Since spapr_memory_plug() only gets called if pc_dimm_pre_plug() succeeded, we expect to have a valid >= 0 slot number, either because the user passed a valid slot number or because pc_dimm_get_free_slot() picked one up for us. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160309730758.2739814.15821922745424652642.stgit@bahia.lan> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	65226afd90	spapr: Use appropriate getter for PC_DIMM_ADDR_PROP The PC_DIMM_ADDR_PROP property is defined as: DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0), Use object_property_get_uint() instead of object_property_get_int(). Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160309729609.2739814.4996614957953215591.stgit@bahia.lan> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	84fd549619	pc-dimm: Drop @errp argument of pc_dimm_plug() pc_dimm_plug() doesn't use it. It only aborts on error. Drop @errp and adapt the callers accordingly. [dwg: Removed unused label to fix compile] Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160309728447.2739814.12831204841251148202.stgit@bahia.lan> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	3cff86f036	spapr: Simplify spapr_cpu_core_realize() and spapr_cpu_core_unrealize() Now that the error path of spapr_cpu_core_realize() is just to call idempotent spapr_cpu_core_unrealize() for rollback, no need to create and realize the vCPUs in two separate loops. Merge them and do them same in spapr_cpu_core_unrealize() for symmetry. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160279673321.1808373.2248221100790367912.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	9370c28f12	spapr: Make spapr_cpu_core_unrealize() idempotent spapr_cpu_core_realize() has a rollback path which partially duplicates the code of spapr_cpu_core_unrealize(). Let's make spapr_cpu_core_unrealize() idempotent and call it instead. This requires to: - move the registration and unregistration of the reset handler around but it is harmless, - allocate the array of vCPUs with g_new0() to be able to filter out unused slots, - make sure to only unrealize vCPUs that have been already realized. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160279672626.1808373.14142129300586424514.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago
Greg Kurz	96598cdb14	spapr: Drop spapr_delete_vcpu() unused argument The 'sc' argument is unused. Drop it. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160279671929.1808373.10333672533575251075.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>	6 years ago

1 2 3 4 5 ...

81978 Commits (3b1f244c59b7045680e615d50dc444a316abd891) All Branches Search

81978 Commits (3b1f244c59b7045680e615d50dc444a316abd891)

All Branches