The boot ROM is a minimal implementation designed to load an AST27x0 boot image.
Its source code is available at:
https://github.com/google/vbootrom
Commit id: d6e3386709b3e49322a94ffadc2aaab9944ab77b
Build Information:
```
Build Date : Apr 29 2025 01:23:18
FW Version : git-d6e3386
```
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Nabih Estefan <nabihestefan@google.com>
Link: https://lore.kernel.org/qemu-devel/20250429062822.1184920-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
We have several device tree files already and may have more in the
future so add a new dtb subdirectory and move device tree files there
so they are not mixed with ROM binaries.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <57f179bd3904c1f2ca062ca4d4ff9592bb4f4daa.1745402140.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The default PNOR image is erased and not recognised by skiboot, so NVRAM
gets disabled. This change adds a tiny pnor file that is a proper FFS
image with a formatted NVRAM partition. This is recognised by skiboot and
will persist across machine reboots.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This adds TPM pass through API.
Also, moves SLOF from github to gitlab.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This skiboot firmware importantly contains updates for HOMER/OCC bugs.
These subsystems have bitrotted in QEMU and skiboot and this update
allows new QEMU models to be exercised.
Power11 support is also added. This model is not yet merged in QEMU,
but firmware support will make development and testing simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The bootrom is a minimal bootrom used to load an NPCM8XX image.
The source code is located in the same repo as the NPCM7XX one:
github.com/google/vbootrom/tree/master/npcm8xx.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-3-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This newer vbootrom supports NPCM8xx. Similar to the NPCM7XX one
it supports loading the UBoot from the SPI device and not more.
We updated the npcm7xx bootrom to be compiled from this version.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-2-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is SeaBIOS for the hppa architecture v18.
It allows us to emulate up to 256 GB RAM on 64-bit
guests and to boot HP-UX 64-bit one step further.
Fixes:
- Fix PDC_CACHE/PDC_CACHE_RET_SPID return value for space
register hashing on 64-bit HP-UX
- Fix IRT table entries to use slot number
- Increase PCI alignment for memory bars to 64k
New PDC functions & general enhancements:
- Allow up to 256 GB RAM on 64-bit machines
Signed-off-by: Helge Deller <deller@gmx.de>
Fix the problem with the non-quiesced virtio-net device and
make sure to abort the boot process if the user specified a wrong
loadparm parameter.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Because the loadparm specifies an exact kernel the user wants to boot, if the
loadparm is invalid it must represent a misconfiguration of the guest. Thus we
should abort the IPL immediately, without attempting to use other devices, to
avoid booting into an unintended guest image.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20250117212235.1324063-2-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code in net_init_ip() currently bails out early if "rc" is less
than 0, so the if-statements that check for negative "rc" codes to
print out some specific error messages with regards to the TFTP server
are never reached. Move them earlier to bring that dead code back to
life.
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20250116115826.192047-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we are trying to boot from virtio-net devices, the
s390-ccw bios currently leaves the virtio-net device enabled
after using it. That means that the receiving virt queues will
continue to happily write incoming network packets into memory.
This can corrupt data of the following boot process. For example,
if you set up a second guest on a virtual network and create a
lot of broadcast traffic there, e.g. with:
ping -i 0.02 -s 1400 -b 192.168.1.255
and then you try to boot a guest with two boot devices, a network
device first (which should not be bootable) and e.g. a bootable SCSI
CD second, then this guest will fail to load the kernel from the CD
image:
$ qemu-system-s390x -m 2G -nographic -device virtio-scsi-ccw \
-netdev tap,id=net0 -device virtio-net-ccw,netdev=net0,bootindex=1 \
-drive if=none,file=test.iso,format=raw,id=cd1 \
-device scsi-cd,drive=cd1,bootindex=2
LOADPARM=[ ]
Network boot device detected
Network boot starting...
Using MAC address: 52:54:00:12:34:56
Requesting information via DHCP: done
Using IPv4 address: 192.168.1.76
Using TFTP server: 192.168.1.1
Trying pxelinux.cfg files...
TFTP error: ICMP ERROR "port unreachable"
Receiving data: 0 KBytes
Repeating TFTP read request...
TFTP error: ICMP ERROR "port unreachable"
Failed to load OS from network.
Failed to IPL from this network!
LOADPARM=[ ]
Using virtio-scsi.
! virtio-scsi:setup:inquiry: response VS RESP=ff !
ERROR: No suitable device for IPL. Halting...
We really have to shut up the virtio-net devices after we're not
using it anymore. The easiest way to do this is to simply reset
the device, so let's do that now.
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20250116115826.192047-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be able to properly silence a virtio device after using it,
we need a global function to reset the device.
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20250116115826.192047-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QEMU consumes some device tree blobs, so these have been committed
to the tree in as firmware, along with the device tree source used
to generate them. We know the blobs are "good enough" to have QEMU
boot a system, so we don't really maintain and rebuild the sources.
These blobs were generated with older 'dtc' binaries. We use the
v1.6.1 version since 2021 (commit 962fde57b7 "dtc: Update to version
1.6.1").
Since commit 6e0dc9d2a8 ("meson: compile bundled device trees"),
if dtc binary is available, it is directly used to compile the
device tree sources. New versions of 'dtc' add checks which display
warnings or errors. Our sources are a bit old, so dtc v1.6.1 now
emit the following warnings on a fresh build:
[163/3414] Generating pc-bios/canyonlands.dts with a custom command
pc-bios/canyonlands.dts:47.9-50.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
pc-bios/canyonlands.dts:210.13-429.5: Warning (unit_address_vs_reg): /plb/opb: node has a reg or ranges property, but no unit name
pc-bios/canyonlands.dts:464.26-504.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie"
pc-bios/canyonlands.dts:506.26-546.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie"
pc-bios/canyonlands.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
pc-bios/canyonlands.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
pc-bios/canyonlands.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
pc-bios/canyonlands.dts:268.14-289.7: Warning (avoid_unnecessary_addr_size): /plb/opb/ebc/ndfc@3,0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
[164/3414] Generating pc-bios/petalogix-s3adsp1800.dts with a custom command
pc-bios/petalogix-s3adsp1800.dts:258.33-266.5: Warning (interrupt_provider): /plb/interrupt-controller@81800000: Missing #address-cells in interrupt provider
[165/3414] Generating pc-bios/petalogix-ml605.dts with a custom command
pc-bios/petalogix-ml605.dts:234.39-241.5: Warning (interrupt_provider): /axi/interrupt-controller@81800000: Missing #address-cells in interrupt provider
[177/3414] Generating pc-bios/bamboo.dts with a custom command
pc-bios/bamboo.dts:45.9-48.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
pc-bios/bamboo.dts:87.13-154.5: Warning (unit_address_vs_reg): /plb/opb: node has a reg or ranges property, but no unit name
pc-bios/bamboo.dts:198.3-50: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
pc-bios/bamboo.dts:87.13-154.5: Warning (interrupts_property): /plb/opb: Missing interrupt-parent
pc-bios/bamboo.dts:100.14-108.6: Warning (interrupts_property): /plb/opb/ebc: Missing interrupt-parent
From QEMU perspective, these warnings are not really useful. It is
the responsibility of developers adding DT source/blob to QEMU
repository to check the source doesn't produce warnings, but as
long as the blob is useful enough, QEMU can consume it. So these
warnings don't add any value, instead they are noisy and might
distract us to focus on important warnings. Better disable them.
'dtc' provides the '--quiet' option for that [*]:
$ dtc --help
Usage: dtc [options] <input file>
Options: -[qI:O:o:V:d:R:S:p:a:fb:i:H:sW:E:@AThv]
-q, --quiet
Quiet: -q suppress warnings, -qq errors, -qqq all
Update meson to disable these unuseful DTC warnings.
[*] https://lore.kernel.org/qemu-devel/CAFEAcA-WJ9J1YQunJ+bSG=wnpxh1By+Bf18j2CyV7G0vZ=8b7g@mail.gmail.com/
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20231006064750.33852-1-philmd@linaro.org>
I was seeing failures on vnc-display-test on FreeBSD:
make vm-build-freebsd V=1 TARGET_LIST=aarch64-softmmu BUILD_TARGET=check-qtest QEMU_LOCAL=1 DEBUG=1
Leads to:
qemu-system-aarch64: -vnc none: could not read keymap file: 'en-us'
Broken pipe
../src/tests/qtest/libqtest.c:196: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
which was as far as I could tell because we don't populate the
$BLD/pc-bios/keymaps (although scripts/symlink-install-tree.py
attempts to symlink qemu-bundle/usr/local/share/qemu/keymaps/ to that
dir).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250108121054.1126164-31-alex.bennee@linaro.org>
Without descriptor libvirt cannot discover the EDK II binaries via
the qemu:///system connection.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Message-ID: <20241212090059.94167-1-heinrich.schuchardt@canonical.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the default BIOS being compatible with amd-sev-es add the feature
to the json to indicate it's support
Signed-off-by: Pratik R. Sampat <pratikrajesh.sampat@amd.com>
Message-ID: <20241118161405.208437-1-pratikrajesh.sampat@amd.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that we can boot from multiple boot devices, we have to make sure
to reinitialize static variables like rx_last_idx to avoid that they
contain garbage data during the second boot attempt (which can lead to
crashes when the code tries to access the wrong ring data).
Message-ID: <20241111131120.317796-1-thuth@redhat.com>
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit bb185de423 ("s390x: Add individual loadparm assignment to
CCW device") allowed boot devices to be assigned a loadparm value independent
of the machine value, however, when no boot devices are defined, the machine
loadparm becomes ignored. Therefore, let's check the machine loadparm
prior to probing the devices.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241114161952.3508554-1-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clear information about cdrom type so that current IPL device isn't tainted
by stale data from previous devices.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241108194136.2833932-1-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This is SeaBIOS for the hppa architecture v17.
If comes with some important firmware and SCSI fixes and
prepares for futher development to support 64-bit HP-UX
and MPE/UX in the future.
New PDC functions & general enhancements:
- Add PDC_MODEL_GET_INSTALL_KERNEL firmware call
- Add PDC_PAT_EVENT firmware call
- Support ENTRY_IO_BOOTOUT
- Prefer memory-access over io-access of GSP serial port
- Disable LMMIO_DIRECT0 range during modification
- Small optimizations in IODC call
Fixes:
- esp-scsi: indicate acceptance of MESSAGE IN phase data
- Avoid crash when booting without SCSI controller
- Remove exec flag from hppa-firmware.img
- Fix LMMIO detection for PCI cards on Astro/Elroy
- Avoid trashing MPE IPL bootloader stack
- HP-UX 11 64-bit saves number of RAM pages in PAGE0 at 0x33c
- Fix return value of PDC_CACHE/PDC_CACHE_RET_SPID for space id hashing
- Allow PDC functions to act when called in narrow mode
- pcidevice: Use portaddr_t for io port addresses
Cleanups:
- Change default make target to "parisc"
- Clean the "out-64" directory on "make clean"
Signed-off-by: Helge Deller <deller@gmx.de>
This update includes the full boot order support feature from Jared Rossi
and the TEXTREL fix from Jens Remus.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some packaging tools want to override `LDFLAGS` when building QEMU, this will
result in a build error as most likely no `-nostdlib` flag is passed. Introduce
`EXTRA_LDFLAGS` so that the packager can override `LDFLAGS` without breaking the
build.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-ID: <20241001153618.17791-4-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Drop the hunk to netbook.mak which is not necessary anymore]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 7cd50cbe4c ("pc-bios/s390-ccw: Don't use __bss_start with the
"larl" instruction") introduced the address constant bss_start_literal
for __bss_start in the .text section, which introduced a relocation in
code (i.e. TEXTREL). The dedicated constant is required, as __bss_start
may not necessarily be aligned on a 2-byte boundary (see subject commit
for details).
Move the constant to the .data section to get rid of the relocation in
the .text section. Add the linker option -z text to prevent TEXTRELs to
get introduced in the future.
Note that the R_390_RELATIVE relocations are taken care of by function
glue() in include/hw/elf_ops.h.inc introduced by commit 5dce07e1cb
("elf-loader: Provide the possibility to relocate s390 ELF files").
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-ID: <20241001153618.17791-3-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The assembler directive .align [1] has architecture-dependent behavior,
which may be ambiguous for the reader. Some architectures perform the
alignment in bytes, others in power of two. s390 does in bytes.
Use the directive .balign [2] instead, to clarify that the alignment
request is in bytes. No functional change.
[1] https://sourceware.org/binutils/docs/as/Align.html
[2] https://sourceware.org/binutils/docs/as/Balign.html
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-ID: <20241001153618.17791-2-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Allow attempts to boot from multiple IPL devices. If the first device fails to
IPL, select the pre-built IPLB for the next device in the boot order and attempt
to IPL from it. Continue this process until IPL is successful or there are no
devices left to try.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-18-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Because virtio-scsi type devices use a non-architected IPLB pbt code they cannot
be set and stored normally. Instead, the IPLB must be rebuilt during re-ipl.
As s390x does not natively support multiple boot devices, the devno field is
used to store the position in the boot order for the device.
Handling the rebuild as part of DIAG308 removes the need to check the devices
for invalid IPLBs later in the IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-17-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a loadparm property to the VirtioCcwDevice object so that different
loadparms can be defined on a per-device basis for CCW boot devices.
The machine/global loadparm is still supported. If both a global and per-device
loadparm are defined, the per-device value will override the global value for
that device, but any other devices that do not specify a per-device loadparm
will still use the global loadparm.
It is invalid to assign a loadparm to a non-boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-15-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, structures defined in both hw/s390x/ipl.h and pc-bios/s390-ccw/iplb.h
must be kept in sync, which is prone to error. Instead, create a new directory
at include/hw/s390x/ipl/ to contain the definitions that must be shared.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-14-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from IPL functions such that a return code is propagated
back to the main IPL calling function (rather than terminating immediately),
which facilitates possible error recovery in the future.
A select few panics remain, which indicate fatal non-devices errors that must
result in termination.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-13-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from Netboot specific functions so that error recovery
may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-12-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from DASD IPL specific functions so that error recovery
may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-11-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from virtio-scsi IPL specific functions so that error
recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-10-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from ECKD block device IPL specific functions so that
error recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-9-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from IPL ISO El Torito specific functions so that error
recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-8-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the netboot code has been merged into the main s390-ccw.img,
it also does not make sense to keep the build rules in a separate
file. Thus let's merge netboot.mak into the main Makefile.
Message-Id: <20240621082422.136217-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the netboot code has now been merged into the main s390-ccw.img
binary, we don't need the separate s390-netboot.img anymore. Remove
it and the code that was responsible for loading it.
Message-Id: <20240621082422.136217-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We originally built a separate binary for the netboot code since it
was considered as experimental and we could not be sure that the
necessary SLOF module had been checked out. Time passed, the code
proved its usefulness, and the build system nowadays makes sure that
the SLOF module is checked out if you have a s390x compiler available
for building the s390-ccw bios. So there is no real compelling reason
anymore to keep the netboot code in a separate binary. Linking the
code together with the main s390-ccw.img will make future enhancements
much easier, like supporting more than one boot device.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-4-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are already using the libc from SLOF for the s390-netboot.img, and
this libc implementation is way more complete and accurate than the
simple implementation that we currently use for the s390-ccw.img binary.
Since we are now always assuming that the SLOF submodule is available
when building the s390-ccw bios (see commit bf6903f694), we can drop
the simple implementation and use the SLOF libc for the s390-ccw.img
binary, too.
Additionally replace sclp_print calls with puts/printf now that it is
available.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-3-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Added loongarch UEFI BIOS support to compiled scripts.
UEFI code images require 16M alignment, flash images require
16M alignment, under the loongarch architecture.This is agreed
upon when the firmware is loaded in QEMU under Loongarch.
The naming of UEFI under loongarch refers to the x86 and arm naming methods,
and the UEFI image names in x86 and arm are:
edk2-i386-code.fd
edk2-i386-vars.fd
edk2-arm-code.fd
edk2-arm-vars.fd
So on loongarch, we named it:
edk2-loongarch64-code.fd
edk2-loongarch64-vars.fd
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Message-ID: <20240724022245.1317884-1-lixianglai@loongson.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A new minor version of OpenSBI was just released after our bump to
OpenSBI 1.5. It contains significant bug fixes that it's worth doing
a new update for QEMU 9.1.
Submodule roms/opensbi 455de672dd..43cace6c36:
> lib: sbi: check result of pmp_get() in is_pmp_entry_mapped()
> lib: sbi: fwft: fix incorrect size passed to sbi_zalloc()
> lib: sbi: dbtr: fix potential NULL pointer dereferences
> include: Adjust Sscofpmf mhpmevent mask for upper 8 bits
> lib: sbi_hsm: Save/restore menvcfg only when it exists
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240805120259.1705016-2-dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update list of images supported in unpack_edk2_blobs to enable RISC-V
ACPI table testing.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-13-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The -Wl,-pie and -nostdlib flags are added to LDFLAGS twice. Merge
the two lines to get rid of the duplicates.
Message-ID: <20240621082422.136217-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Jamin Lin
BALATON Zoltan
Nicholas Piggin
Alexey Kardashevskiy
Hao Wu
Helge Deller
Thomas Huth
Jared Rossi
Philippe Mathieu-Daudé
Alex Bennée
Heinrich Schuchardt
Pratik R. Sampat
Marc Hartmayer
Jens Remus
Mark Cave-Ayland
Gerd Hoffmann
Xianglai Li
Daniel Henrique Barboza
Sunil V L