Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1499342940-56739-11-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
frontends should avoid accessing CharDriver struct where possible
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-6-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_chr_fe_get_driver() is unsafe, frontends with hotswap support
should not access CharDriver ptr directly as CharDriver might change.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-5-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a possibility to change a char device without a frontend
removal.
Ideally, it would have to happen transparently to a frontend, i.e.
frontend would continue its regular operation.
However, backends are not stateless and are set up by the frontends
via qemu_chr_fe_<> functions, and it's not (generally) possible to replay
that setup entirely in a backend code, as different chardevs respond
to the setup calls differently, so do frontends work differently basing
on those setup responses.
Moreover, some frontend can generally get and save the backend pointer
(qemu_chr_fe_get_driver()), and it will become invalid after backend change.
So, a frontend which would like to support chardev hotswap has to register
a "backend change" handler, and redo its backend setup there.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1499342940-56739-4-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
parse function will be used by the following patch
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-Id: <1499342940-56739-2-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sending a break on a serial console can be useful for debugging the
guest. But not all chardev backends support sending breaks (only telnet
and mux do). The chardev-send-break command allows to send a break even
if using other backends.
Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170611074817.13621-1-sf@sfritsch.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use 'send a break' in all 3 pieces of text as suggested by eblake
"parport" is considered "old" since commit 88a946d32d, when "parallel"
was added. Similarly for "tty" in commit d59044ef74.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Suggested by Paolo Bonzini during series review.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This simplifies removing a backend for a frontend user (no need to
retrieve the associated driver and separate delete call etc).
NB: many frontends have questionable handling of ending a chardev. They
should probably delete the backend to prevent broken reusage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no clear reason to have those functions associated with
frontend.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
qemu_chr_fe_write() is similar to qemu_chr_write_all(): the later write
all with a chardev backend.
Make qemu_chr_write() and qemu_chr_fe_write_buffer() take an 'all'
argument. If false, handle 'partial' write the way qemu_chr_fe_write()
use to, and call qemu_chr_write() from qemu_chr_fe_write().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Only the console handle shouldn't be closed, however, the "file" handle
should.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
hcom is the name of the file handle, regardless of the actual chardev
driver (serial, file, console etc..). Rename it to be more explicit.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Those 2 functions are specific to serial chardev, make it more clear.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The "len" argument can be passed directly to win_chr_read()
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
win_chr_read_poll() is always used before win_chr_read().
We can easily fold win_chr_readfile() too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
chardev/char.c: In function 'chardev_name_foreach':
chardev/char.c:546:19: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
for (i = 0; i < ARRAY_SIZE(chardev_alias_table); i++) {
^
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170530120919.8874-1-f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Instead of flushing the buffer byte by byte, call qemu_chr_be_write()
with as much byte possible accepted by the front-end.
Factor out buffer flushing in a common function udp_chr_flush_buffer().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add a property to lookup the connection details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is mainly useful to know the actual bound port when using port 0.
For example, when starting qemu with socket on port 0, before:
QEMU waiting for connection on: disconnected:tcp:localhost:0,server
After:
QEMU waiting for connection on: disconnected:tcp:localhost:32454,server
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This helper will be used in yet another place in the following patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The list is now empty, the chardev cleanup is taken care of by the unref
of the root container.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
qemu_chardev_new() now uses object_new_with_props() with /chardevs
parent container. It will fail to insert the object if the same "id"
already exists. "chardevs" list usage has been removed in previous
commits.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Use object_resolve_path_component() and object_child_foreach() on
/chardevs container instead of iterating over chardevs list.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add a /chardevs container object to hold the list of chardevs.
(Note: QTAILQ chardevs is going away in the following commits)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
mux_chr_event() already send events to all backends, rename it,
export it, and use it from muxes_realize_done. This should help abstract
away mux implementation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The function simply alias and hides the real event function.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This introduces basic support for TN3270, which needs to negotiate
three Telnet options during handshake:
- End of Record
- Binary Transmission
- Terminal-Type
As a basic implementation, this simply ignores NOP and Interrupt
Process(IP) commands. More work should be done for them later.
For more details, please refer to RFC 854 and 1576.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Acked-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We can call qemu_chr_fe_set_handlers() to add/remove fd been watched
in 'context' which can be either default main context or other explicit
context. But the original logic is not correct, we didn't remove
the right fd because we call g_main_context_find_source_by_id(NULL, tag)
which always try to find the Gsource from default context.
Fix it by passing the right context to g_main_context_find_source_by_id().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add QEMU Wacom Penpartner serial tablet emulation.
GSoC 2016 project.
Signed-off-by: Anatoli Huseu1 <avg.tolik@gmail.com>
Various cleanups.
Add line speed tracking.
Implement ST and SP commands.
Adapted to chardev QOMification.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486391007-10116-1-git-send-email-kraxel@redhat.com
When a serial port writes data to a pty that's disconnected, drop the
data and return the length dropped. This avoids triggering pointless
retries in callers like the 16550A serial_xmit(), and causes
qemu_chr_fe_write() to write all data to the log file, rather than
logging only while a pty client like virsh console happens to be
connected.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Message-Id: <1485870329-79428-1-git-send-email-eswierk@skyportsystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Those could probably be squashed with earlier patches, however I
couldn't easily identify them, test them or check if there are still
necessary on various platforms.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Anton Nefedov
Marc-André Lureau
Stefan Fritsch
Philippe Mathieu-Daudé
Markus Armbruster
Jing Liu
zhanghailiang
Anatoli Huseu1
Ed Swierk