AioContext has its own io_uring instance for file descriptor monitoring.
The disk I/O io_uring code was developed separately. Originally I
thought the characteristics of file descriptor monitoring and disk I/O
were too different, requiring separate io_uring instances.
Now it has become clear to me that it's feasible to share a single
io_uring instance for file descriptor monitoring and disk I/O. We're not
using io_uring's IOPOLL feature or anything else that would require a
separate instance.
Unify block/io_uring.c and util/fdmon-io_uring.c using the new
aio_add_sqe() API that allows user-defined io_uring sqe submission. Now
block/io_uring.c just needs to submit readv/writev/fsync and most of the
io_uring-specific logic is handled by fdmon-io_uring.c.
There are two immediate advantages:
1. Fewer system calls. There is no need to monitor the disk I/O io_uring
ring fd from the file descriptor monitoring io_uring instance. Disk
I/O completions are now picked up directly. Also, sqes are
accumulated in the sq ring until the end of the event loop iteration
and there are fewer io_uring_enter(2) syscalls.
2. Less code duplication.
Note that error_setg() messages are not supposed to end with
punctuation, so I removed a '.' for the non-io_uring build error
message.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20251104022933.618123-15-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add and wire up qigvm_x86_get_mem_map_entry function which converts the
e820 table into an igvm memory map parameter. This makes igvm files for
the native (non-confidential) platform with memory map parameter work.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20251029105555.2492276-4-kraxel@redhat.com>
When we unrealize a CPU object (which happens on vCPU hot-unplug), we
should destroy all the AddressSpace objects we created via calls to
cpu_address_space_init() when the CPU was realized.
Commit 24bec42f3d added a function to do this for a specific
AddressSpace, but did not add any places where the function was
called.
Since we always want to destroy all the AddressSpaces on unrealize,
regardless of the target architecture, we don't need to try to keep
track of how many are still undestroyed, or make the target
architecture code manually call a destroy function for each AS it
created. Instead we can adjust the function to always completely
destroy the whole cpu->ases array, and arrange for it to be called
during CPU unrealize as part of the common code.
Without this fix, AddressSanitizer will report a leak like this
from a run where we hot-plugged and then hot-unplugged an x86 KVM
vCPU:
Direct leak of 416 byte(s) in 1 object(s) allocated from:
#0 0x5b638565053d in calloc (/data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/qemu-system-x86_64+0x1ee153d) (BuildId: c1cd6022b195142106e1bffeca23498c2b752bca)
#1 0x7c28083f77b1 in g_malloc0 (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x637b1) (BuildId: 1eb6131419edb83b2178b682829a6913cf682d75)
#2 0x5b6386999c7c in cpu_address_space_init /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../system/physmem.c:797:25
#3 0x5b638727f049 in kvm_cpu_realizefn /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../target/i386/kvm/kvm-cpu.c:102:5
#4 0x5b6385745f40 in accel_cpu_common_realize /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../accel/accel-common.c:101:13
#5 0x5b638568fe3c in cpu_exec_realizefn /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../hw/core/cpu-common.c:232:10
#6 0x5b63874a2cd5 in x86_cpu_realizefn /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../target/i386/cpu.c:9321:5
#7 0x5b6387a0469a in device_set_realized /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../hw/core/qdev.c:494:13
#8 0x5b6387a27d9e in property_set_bool /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../qom/object.c:2375:5
#9 0x5b6387a2090b in object_property_set /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../qom/object.c:1450:5
#10 0x5b6387a35b05 in object_property_set_qobject /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../qom/qom-qobject.c:28:10
#11 0x5b6387a21739 in object_property_set_bool /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../qom/object.c:1520:15
#12 0x5b63879fe510 in qdev_realize /data_nvme1n1/linaro/qemu-from-laptop/qemu/build/x86-tgts-asan/../../hw/core/qdev.c:276:12
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2517
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250929144228.1994037-4-peter.maydell@linaro.org
Signed-off-by: Peter Xu <peterx@redhat.com>
This removes the TARGET_S390X and CONFIG_KVM conditions from the
CPU commands that are conceptually specific to s390x. Top level
stubs are provided to cope with non-s390x targets, or builds
without KVM.
The removal of CONFIG_KVM is justified by the fact there is no
conceptual difference between running 'qemu-system-s390x -accel tcg'
on a build with and without KVM built-in, so apps only using TCG
can't rely on the CONFIG_KVM in the schema.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-11-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_* conditions from all the CPU commands
that are conceptually target independent. Top level stubs are
provided to cope with targets which do not currently implement
all of the commands. Adjust the doc comments accordingly.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-10-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the Xen event channel
commands, moving them to the recently introduced misc-i386.json
QAPI file, given they are inherantly i386 specific commands.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-7-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the SGX confidential
virtualization commands, moving them to the recently introduced
misc-i386.json QAPI file, given they are inherantly i386 specific
commands.
Observe a pre-existing bug that the "SGXEPCSection" struct lacked
a TARGET_I386 condition, despite its only usage being behind a
TARGET_I386 condition.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-6-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_ARM condition from the query-gic-capability
command. This requires providing a QMP command stub for non-ARM targets.
This in turn requires moving the command out of misc-target.json, since
that will trigger symbol poisoning errors when built from target
independent code.
Following the earlier precedent, this creates a misc-arm.json file to
hold this ARM specific command.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-5-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the SEV confidential
virtualization commands, moving them to the recently introduced
misc-i386.json QAPI file, given they are inherantly i386 specific
commands.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-4-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the rtc-reset-reinjection
command. This requires providing a QMP command stub for non-i386 target.
This in turn requires moving the command out of misc-target.json, since
that will trigger symbol poisoning errors when built from target
independent code.
Rather than putting the command into misc.json, it is proposed to create
misc-$TARGET.json files to hold commands whose impl is conceptually
only applicable to a single target. This gives an obvious docs hint to
consumers that the command is only useful in relation a specific target,
while misc.json is for commands applicable to 2 or more targets.
The current impl of qmp_rtc_reset_reinject() is a no-op if the i386
RTC is disabled in Kconfig, or if the running machine type lack any
RTC device.
The stub impl for non-i386 targets retains this no-op behaviour.
However, it is now reporting an Error mentioning this command is not
available for current target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-2-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Both monitor-fd.c and monitor-internal.c contain a stub for
monitor_get_fd(), which causes a duplicate symbol linker error when
linking rust-qemu-api-integration. Use monitor-internal.c instead of
monitor-fd.c and remove the latter.
Reported-by: Zhao Liu <zhao1.liu@intel.com>
Suggested-by: Zhao Liu <zhao1.liu@intel.com>
Fixes: fccb744f41 ("gdbstub: Try unlinking the unix socket before binding")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250217104900.230122-1-iii@linux.ibm.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case an emulated process execve()s another emulated process, bind()
will fail, because the socket already exists. So try deleting it. Use
the existing unix_listen() function which does this. Link qemu-user
with qemu-sockets.c and add the monitor_get_fd() stub.
Note that it is not possible to handle this in do_execv(): deleting
gdbserver_user_state.socket_path before safe_execve() is not correct,
because the latter may fail, and afterwards we may lose control.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250117001542.8290-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-12-alex.bennee@linaro.org>
Configuring "--enable-user --disable-system --enable-tools" causes the
build failure with the following information:
/usr/bin/ld: libhwcore.a.p/hw_core_qdev.c.o: in function `device_finalize':
/qemu/build/../hw/core/qdev.c:688: undefined reference to `qapi_event_send_device_deleted'
collect2: error: ld returned 1 exit status
To fix the above issue, add qdev.c stub when build with `have_tools`.
With this fix, QEMU could be successfully built in the following cases:
--enable-user --disable-system --enable-tools
--enable-user --disable-system --disable-tools
--enable-user --disable-system
Cc: qemu-stable@nongnu.org
Fixes: 388b849fb6 ("stubs: avoid duplicate symbols in libqemuutil.a")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2766
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250121154318.214680-1-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qapi_event_send_device_deleted is always included (together with the
rest of QAPI) in libqemuutil.a if either system-mode emulation or tools
are being built, and in that case the stub causes a duplicate symbol
to appear in libqemuutil.a.
Add the symbol only if events are not being requested.
Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are about to remove direct calls to individual accelerators for
this information and will need a central point for plugins to hook
into time changes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240530220610.1245424-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-5-alex.bennee@linaro.org>
Compiling without system, user, tools or guest-agent fails with the
following error message:
./configure --disable-system --disable-user --disable-tools \
--disable-guest-agent
error message:
/usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function `error_printf':
/media/liuzhao/data/qemu-cook/build/../util/error-report.c:38: undefined reference to `error_vprintf'
/usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function `vreport':
/media/liuzhao/data/qemu-cook/build/../util/error-report.c:215: undefined reference to `error_vprintf'
collect2: error: ld returned 1 exit status
This is because tests/bench and tests/unit both need qemuutil, which
requires error_vprintf stub when system is disabled.
Add error_vprintf stub into stub_ss for all cases other than disabling
system.
Fixes: 3a15604900 ("stubs: include stubs only if needed")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240605152549.1795762-1-zhao1.liu@intel.com>
[Include error-printf.c unconditionally. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compilation QGA without system and user fails
./configure --disable-system --disable-user --enable-guest-agent
Link failure:
/usr/bin/ld: libqemuutil.a.p/util_main-loop.c.o: in function
`os_host_main_loop_wait':
../util/main-loop.c:303: undefined reference to `replay_mutex_unlock'
/usr/bin/ld: ../util/main-loop.c:307: undefined reference to
`replay_mutex_lock'
/usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function
`error_printf':
../util/error-report.c:38: undefined reference to `error_vprintf'
/usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function
`vreport':
../util/error-report.c:225: undefined reference to `error_vprintf'
/usr/bin/ld: libqemuutil.a.p/util_qemu-timer.c.o: in function
`timerlist_run_timers':
../util/qemu-timer.c:562: undefined reference to `replay_checkpoint'
/usr/bin/ld: ../util/qemu-timer.c:530: undefined reference to
`replay_checkpoint'
/usr/bin/ld: ../util/qemu-timer.c:525: undefined reference to
`replay_checkpoint'
ninja: build stopped: subcommand failed.
Fixes: 3a15604900 ("stubs: include stubs only if needed")
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20240426121347.18843-2-kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently it is not documented anywhere why some functions need to
be stubbed.
Group the files in stubs/meson.build according to who needs them, both
to reduce the size of the compilation and to clarify the use of stubs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
replay.c symbols are only needed by user mode emulation, with the
exception of replay_mode that is needed by both user mode emulation
(by way of qemu_guest_getrandom) and block layer tools (by way of
util/qemu-timer.c).
Since it is needed by libqemuutil rather than specific files that
are part of the tools and emulators, split the replay_mode stub
into its own file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the colo stubs are needed exactly when the build options are not
enabled, move them together with the code they stub.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the memory-device stubs are needed exactly when the Kconfig symbols are not
needed, move them to hw/mem/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-15-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the ramfb stubs are needed exactly when the Kconfig symbols are not
needed, move them to hw/display/ and compile them when ramfb.c is absent.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the semihosting stubs are needed exactly when the Kconfig symbols
are not needed, move them to semihosting/ and conditionalize them
on CONFIG_SEMIHOSTING and/or CONFIG_SYSTEM_ONLY.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the virtio memory device stubs are needed exactly when the
Kconfig symbol is not enabled, they can be placed in hw/virtio/ and
conditionalized on CONFIG_VIRTIO_MD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the USB stubs are needed exactly when the Kconfig symbols are not
enabled, they can be placed in hw/usb/ and conditionalized on CONFIG_USB.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These file define functions are are not called from common code
anymore. Delete those functions and, if applicable, the entire files.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hotplug.c, qdev-hotplug.c and reset.c are not used by user emulation
and need not be included in hwcore_ss. Move them to system_ss, where
they belong, by letting the linker pull in the stubs when needed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want to place non-qmp stubs in there, so let's rename it. While at
it, put it into the MAINTAINERS file under "Memory devices".
Message-ID: <20230926185738.277351-8-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's factor out (un)plug handling, to be reused from arm/virt code.
Provide stubs for the case that CONFIG_VIRTIO_MD is not selected because
neither virtio-mem nor virtio-pmem is enabled. While this cannot
currently happen for x86, it will be possible for arm/virt.
Message-ID: <20230711153445.514112-3-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Add option to not build filter-rewriter and colo-compare when
they are not needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230515130640.46035-2-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We don't allow to use x-colo capability when replication is not
configured. So, no reason to build COLO when replication is disabled,
it's unusable in this case.
Note also that the check in migrate_caps_check() is not the only
restriction: some functions in migration/colo.c will just abort if
called with not defined CONFIG_REPLICATION, for example:
migration_iteration_finish()
case MIGRATION_STATUS_COLO:
migrate_start_colo_process()
colo_process_checkpoint()
abort()
It could probably make sense to have possibility to enable COLO without
REPLICATION, but this requires deeper audit of colo & replication code,
which may be done later if needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230428194928.1426370-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As we are about to have a common syscalls.c for gdbstub we need to
stub out one semihosting helper function for all targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230307170405.796822-1-alex.bennee@linaro.org>
The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.
qmp_query_vm_generation_id() in stubs/vmgenid.c is the last user of
QERR_UNSUPPORTED outside qga/. Unlike the stubs we just dropped, it
is actually reachable, namely when CONFIG_ACPI_VMGENID is off. It
always fails like
(qemu) info vm-generation-id
Error: this feature or command is not currently supported
Turns out the real qmp_query_vm_generation_id() doesn't actually
depend on CONFIG_ACPI_VMGENID, and fails safely when it's off. Move
it to hw/core/machine-qmp-cmds.c, and drop the stub. The error
message becomes
Error: VM Generation ID device not found
Feels like an improvement to me.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Add/remove the AioContext in aio_context_list in graph-lock.c when it is
created/destroyed. This allows using the graph locking operations from
this AioContext.
In order to allow linking util/async.c with binaries that don't include
the block layer, introduce stubs for (un)register_aiocontext().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If configuring with "--disable-system --disable-user --enable-guest-agent"
the linking currently fails with:
qga/qemu-ga.p/commands.c.o: In function `qmp_command_info':
build/../../home/thuth/devel/qemu/qga/commands.c:70: undefined reference to `qmp_command_name'
build/../../home/thuth/devel/qemu/qga/commands.c:71: undefined reference to `qmp_command_is_enabled'
build/../../home/thuth/devel/qemu/qga/commands.c:72: undefined reference to `qmp_has_success_response'
qga/qemu-ga.p/commands.c.o: In function `qmp_guest_info':
build/../../home/thuth/devel/qemu/qga/commands.c:82: undefined reference to `qmp_for_each_command'
qga/qemu-ga.p/commands.c.o: In function `qmp_guest_exec':
build/../../home/thuth/devel/qemu/qga/commands.c:410: undefined reference to `qbase64_decode'
qga/qemu-ga.p/channel-posix.c.o: In function `ga_channel_open':
build/../../home/thuth/devel/qemu/qga/channel-posix.c:214: undefined reference to `unix_listen'
build/../../home/thuth/devel/qemu/qga/channel-posix.c:228: undefined reference to `socket_parse'
build/../../home/thuth/devel/qemu/qga/channel-posix.c:234: undefined reference to `socket_listen'
qga/qemu-ga.p/commands-posix.c.o: In function `qmp_guest_file_write':
build/../../home/thuth/devel/qemu/qga/commands-posix.c:527: undefined reference to `qbase64_decode'
Let's make sure that we also compile and link the required files if
the system emulators have not been enabled.
Message-Id: <20221110083626.31899-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The blkio block driver will need to look up the file descriptor for a
given pointer. This is possible in softmmu builds where the RAMBlock API
is available for querying guest RAM.
Add stubs so tools like qemu-img that link the block layer still build
successfully. In this case there is no guest RAM but that is fine.
Bounce buffers and their file descriptors will be allocated with
libblkio's blkio_alloc_mem_region() so we won't rely on QEMU's
qemu_ram_get_fd() in that case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-12-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Forward remote device's interrupts to the guest
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Message-id: 9523479eaafe050677f4de2af5dd0df18c27cfd9.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When invoked from the main loop, this function is the same
as qemu_mutex_iothread_locked, and returns true if the BQL is held.
When invoked from iothreads or tests, it returns true only
if the current AioContext is the Main Loop.
This essentially just extends qemu_mutex_iothread_locked to work
also in unit tests or other users like storage-daemon, that run
in the Main Loop but end up using the implementation in
stubs/iothread-lock.c.
Using qemu_mutex_iothread_locked in unit tests defaults to false
because they use the implementation in stubs/iothread-lock,
making all assertions added in next patches fail despite the
AioContext is still the main loop.
See the comment in the function header for more information.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-2-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Neither tools nor user-mode emulation require the PCI bus stub.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-4-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
fw_cfg_arch_key_name() stub is only required for sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-2-f4bug@amsat.org>
While there are a number of uses in the code-base of the exit(0)
pattern it gets in the way of clean exit which can do all of it's
house-keeping. In particular it was reported that you can crash
plugins this way because TCG can still be running on other threads
when the atexit callback is called.
Use qmp_quit() instead which takes care of some housekeeping before
triggering the shutdown.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Lukas Jünger <lukas.junger@greensocs.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20211026102234.3961636-19-alex.bennee@linaro.org>
commit c0e427d6eb ("hw/acpi/ich9: Enable ACPI PCI hot-plug") removed all
uses of find_i440fx() function. This has been replaced by the more generic call
acpi_get_i386_pci_host() which maybe able to find the root bus both for i440fx
machine type as well as for the q35 machine type. There seems to be no more any
need to maintain a i440fx specific version of the api call. Remove it.
Tested by building from a clean tree successfully.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210825031949.919376-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When using qemu configured with --enabled-modules, the
generic stubs are used instead of the module symbols:
qemu-system-x86_64: -device virtio-vga,blob=on: cannot enable blob resources without udmabuf
Restrict the stubs to Linux and only link them when
CONFIG_VIRTIO_GPU is disabled (only the modularized
version is available when it is enabled).
Reported-by: Maxim R. <mrom06@ya.ru>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/553
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210823100454.615816-2-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We added a stub for the arch_type global in commit 5964ed56d9 so
that we could compile blockdev.c into the tools. However, in commit
9db1d3a2be we removed the only use of arch_type from blockdev.c.
The stub is therefore no longer needed, and we can delete it again,
together with the QEMU_ARCH_NONE value that only the stub was using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-9-peter.maydell@linaro.org
CONFIG_LINUX_IO_URING is not included in config-host.mak and therefore is
not usable in "when" clauses. Check the availability of the library,
which matches the condition for the non-stubbed version block/io_uring.c.
At this point, the difference between libraries that have config-host.mak
entries and those that do not is quite confusing. The remaining ~dozen
should be converted in 6.2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210712151810.508249-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
If we want to wake up a coroutine from a worker thread, aio_co_wake()
currently does not work. In that scenario, aio_co_wake() calls
aio_co_enter(), but there is no current AioContext and therefore
qemu_get_current_aio_context() returns the main thread. aio_co_wake()
then attempts to call aio_context_acquire() instead of going through
aio_co_schedule().
The default case of qemu_get_current_aio_context() was added to cover
synchronous I/O started from the vCPU thread, but the main and vCPU
threads are quite different. The main thread is an I/O thread itself,
only running a more complicated event loop; the vCPU thread instead
is essentially a worker thread that occasionally calls
qemu_mutex_lock_iothread(). It is only in those critical sections
that it acts as if it were the home thread of the main AioContext.
Therefore, this patch detaches qemu_get_current_aio_context() from
iothreads, which is a useless complication. The AioContext pointer
is stored directly in the thread-local variable, including for the
main loop. Worker threads (including vCPU threads) optionally behave
as temporary home threads if they have taken the big QEMU lock,
but if that is not the case they will always schedule coroutines
on remote threads via aio_co_schedule().
With this change, the stub qemu_mutex_iothread_locked() must be changed
from true to false. The previous value of true was needed because the
main thread did not have an AioContext in the thread-local variable,
but now it does have one.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210609122234.544153-1-pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message per Vladimir's review]
Signed-off-by: Eric Blake <eblake@redhat.com>
When the management layer queries a binary built using --disable-tpm
for TPM devices, it gets confused by getting empty responses:
{ "execute": "query-tpm" }
{
"return": [
]
}
{ "execute": "query-tpm-types" }
{
"return": [
]
}
{ "execute": "query-tpm-models" }
{
"return": [
]
}
To make it clearer by returning an error:
- Make the TPM QAPI schema conditional
All of tpm.json is now 'if': 'defined(CONFIG_TPM)'.
- Adapt the HMP command
- Remove stubs which became unnecessary
The management layer now gets a 'CommandNotFound' error:
{ "execute": "query-tpm" }
{
"error": {
"class": "CommandNotFound",
"desc": "The command query-tpm has not been found"
}
}
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This is needed to ensure that virtio-gpu device works for
non-linux builds.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-5-vivek.kasireddy@intel.com>
[ kraxel: add virtio-gpu-udmabuf.c stubs only when building
system emulation ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stefan Hajnoczi
Gerd Hoffmann
Peter Maydell
Daniel P. Berrangé
Ilya Leoshkevich
Zhao Liu
Paolo Bonzini
Alex Bennée
Konstantin Kostiuk
David Hildenbrand
Vladimir Sementsov-Ogievskiy
Markus Armbruster
Emanuele Giuseppe Esposito
Thomas Huth
Jagannathan Raman
Philippe Mathieu-Daudé
Philippe Mathieu-Daudé
Ani Sinha
Vivek Kasireddy