Introduced "test_sha384_ast2600" to validate SHA-384 hashing.
Added "test_sha384_sg_ast2600" for scatter-gather SHA-384 verification.
Implemented "test_sha384_accum_ast2600" to test SHA-384 accumulation.
Registered new test cases in "main" to ensure execution.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-23-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduced SHA-384 test functions to verify hashing operations.
Extended support for scatter-gather ("_sg") and accumulation ("_accum") tests.
Updated test result vectors for SHA-384 validation.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-22-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The digest_addr is set to "src_addr + 0x1000000", where src_addr is the DRAM
base address. However, the value 0x1000000 (16MB) is too large because the
AST1030 does not support DRAM, and its SRAM size is only 768KB.
A range size of 0x10000 (64KB) is sufficient for HACE test cases, as the test
vector size does not exceed 64KB.
Updates:
1. Direct Access Mode
Update digest_addr to "src_addr + 0x10000" in the following functions:
aspeed_test_md5
aspeed_test_sha256
aspeed_test_sha512
2. Scatter-Gather (SG) Mode
Update source address for different SG buffer addresses in the following
functions:
src_addr1 = src_addr + 0x10000
src_addr2 = src_addr + 0x20000
src_addr3 = src_addr + 0x30000
digest_addr = src_addr + 0x40000
aspeed_test_sha256_sg
aspeed_test_sha512_sg
3. ACC Mode Update
Update the SG List start address: src_addr + 0x10000
Update the SG List buffer size to 0x30000 (192KB).
buffer_addr = src_addr + 0x10000
digest_addr = src_addr + 0x40000
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-21-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
To enhance code readability and prevent potential buffer overflows or unintended
size assumptions, this commit updates all fixed-size array declarations to use
explicit array sizes.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-20-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The test cases for the ASPEED HACE model were originally placed in
aspeed_hace-test.c. However, this test file only supports ARM32. To enable
compatibility with all ASPEED SoCs, including the AST2700, which uses the
AArch64 architecture, this update introduces a new source file,
aspeed-hace-utils.c.
All common APIs and test cases have been moved from aspeed_hace-test.c to
aspeed-hace-utils.c to facilitate reuse across different ASPEED SoCs.
As a result, these test cases can now be reused for AST2700 and future ASPEED
SoC testing.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-19-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reordered the aspeed test list to keep the alphabetical order.
No functional changes in test behavior.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-18-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
ASAN spotted a leak of the memory used to hold the tmp_path:
Direct leak of 35 byte(s) in 1 object(s) allocated from:
#0 0x55e29aa96da9 in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:69:3
#1 0x7fe0cfb26518 in g_malloc ../glib/gmem.c:106
#2 0x7fe0cfb4146e in g_strconcat ../glib/gstrfuncs.c:629
#3 0x7fe0cfb0a78f in g_get_tmp_name ../glib/gfileutils.c:1742
#4 0x7fe0cfb0b00b in g_file_open_tmp ../glib/gfileutils.c:1802
#5 0x55e29ab53961 in test_ast2700_evb ../tests/qtest/ast2700-smc-test.c:20:10
#6 0x55e29ab53803 in main ../tests/qtest/ast2700-smc-test.c:65:5
#7 0x7fe0cf7bd24c in __libc_start_main ../csu/libc-start.c:308
#8 0x55e29a9f7759 in _start ../sysdeps/x86_64/start.S:120
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Message-ID: <20250509175047.26066-1-farosas@suse.de>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add new qtests to run postcopy migration with multifd
channels enabled.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/r/20250512125124.147064-4-ppandit@redhat.com
[peterx: rename all new tests to be under /migration/multifd+postcopy/]
Signed-off-by: Peter Xu <peterx@redhat.com>
Ensure successful migration over RDMA by verifying that RLIMIT_MEMLOCK is
set to at least 128MB. This allocation is necessary due to the requirement
to pin significant portions of guest memory, typically exceeding 100MB
in this test, while the remainder is transmitted as compressed zero pages.
Otherwise, it will fail with:
stderr:
qemu-system-x86_64: cannot get rkey
qemu-system-x86_64: error while loading state section id 2(ram)
qemu-system-x86_64: load of migration failed: Operation not permitted
qemu-system-x86_64: rdma migration: recv polling control error!
qemu-system-x86_64: RDMA is in an error state waiting migration to abort!
qemu-system-x86_64: failed to save SaveStateEntry with id(name): 2(ram): -1
qemu-system-x86_64: Channel error: Operation not permitted
Reported-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20250509014211.1272640-1-lizhijian@fujitsu.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add cpu hotplug testcase support for LoongArch system, it passes to
run with command "make check-qtest-loongarch64" as following:
qemu:qtest+qtest-loongarch64 / qtest-loongarch64/cpu-plug-test OK 0.38s 1 subtests passed
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250314085130.4184272-1-maobibo@loongson.cn>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The logic in the qvirtio_read/write function is rather a headache,
involving byte-swapping when the target is big endian, just to
maybe involve another byte-swapping in the qtest_read/write
function immediately afterwards (on the QEMU side). Let's do it in
a more obvious way here: For virtio 1.0, we know that the values have
to be little endian, so let's read/write the bytes in that well known
order here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20250430132817.610903-1-thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Merge qtest_init_with_env_and_capabilities() and qtest_init_with_env()
into one qtest_init_ext().
Reasons:
1. qtest_init_with_env() is just wrong: it gets do_connect parameter
but always pass true to qtest_init_with_env_and_capabilities().
Happily, all qtest_init_with_env() callers pass true as well.
2. qtest_init_with_env() is not used outside of libqtest.c, so no
reason to keep it as public function
3. and in libqtest.c it's used not often, so no problem to use
more generic function instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20250410162250.329941-1-vsementsov@yandex-team.ru>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
With the release of QEMU 10.1, the pc-q35-4.1 machine will be older
than 6 years and thus will get disabled automatically by the
MACHINE_VER_DELETION() macro. Remove the related test to avoid
that the q35-test is failing when the machine is not available anymore.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Enhance the `use-after-unlink` test with a new check for the
case where the client wants to alter the size of an unlinked
file for which it still has an active fid.
Suggested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20250312152933.383967-7-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Add and implement functions to 9pfs test client for sending a 9p2000.L
'Tsetattr' request and receiving its 'Rsetattr' response counterpart.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20250312152933.383967-6-groug@kaod.org>
Migration capabilities are set in multiple '.start_hook'
functions for various tests. Instead, consolidate setting
capabilities in 'migrate_start_set_capabilities()' function
which is called from the 'migrate_start()' function.
While simplifying the capabilities setting, it helps
to declutter the qtest sources.
Suggested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20250411114534.3370816-7-ppandit@redhat.com>
[fix open brace]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
This qtest requires there is a RDMA(RoCE) link in the host.
In order to make the test work smoothly, introduce a
scripts/rdma-migration-helper.sh to detect existing RoCE link before
running the test.
Test will be skipped if there is no available RoCE link.
# Start of rdma tests
# Running /x86_64/migration/precopy/rdma/plain
ok 1 /x86_64/migration/precopy/rdma/plain # SKIP No rdma link available
# To enable the test:
# Run 'scripts/rdma-migration-helper.sh setup' with root to setup a new rdma/rxe link and rerun the test
# Optional: run 'scripts/rdma-migration-helper.sh clean' to revert the 'setup'
# End of rdma tests
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Message-ID: <20250311024221.363421-1-lizhijian@fujitsu.com>
[add 'head -1' to script, reformat test message]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
A few functions now end with a label. The next commit will clean them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-3-armbru@redhat.com>
[Straightforward conflict with commit 988ad4cceb (hw/loongarch/virt:
Fix cpuslot::cpu set at last in virt_cpu_plug()) resolved]
Coccinelle's indentation of virt_create_plic() results in a long line.
Avoid that by mimicking the old indentation manually.
Don't touch tests/tcg/mips/user/. I'm not sure these files are ours
to make style cleanups on. They might be imported third-party code,
which we should leave as is to not complicate future updates.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
First, the VMapple machine only works with the ARM 'host' CPU
type, which isn't accepted for QTest:
$ qemu-system-aarch64 -M vmapple -accel qtest
qemu-system-aarch64: The 'host' CPU type can only be used with KVM or HVF
Second, the QTest framework expects machines to be createable
without specifying optional arguments, however the VMapple
machine requires few of them:
$ qemu-system-aarch64 -M vmapple -accel qtest
qemu-system-aarch64: No firmware specified
$ qemu-system-aarch64 -M vmapple -accel qtest -bios /dev/null
qemu-system-aarch64: No AUX device. Please specify one as pflash drive.
Restrict this machine with QTest so we can at least run check-qtest,
otherwise we get:
$ make check-qtest-aarch64
qemu-system-aarch64: The 'host' CPU type can only be used with KVM or HVF
Broken pipe
../tests/qtest/libqtest.c:199: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
...
7/26 qemu:qtest+qtest-aarch64 / qtest-aarch64/test-hmp ERROR 24.71s killed by signal 6 SIGABRT
2/26 qemu:qtest+qtest-aarch64 / qtest-aarch64/qom-test ERROR 71.23s killed by signal 6 SIGABRT
Suggested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250403203241.46692-5-philmd@linaro.org>
Currently we require everywhere that wants to know if there
is an HPET device to check for "CONFIG_HPET || CONFIG_X_HPET_RUST".
Factor out whether the HPET device is Rust or C into a separate
Kconfig stanza, so that CONFIG_HPET means "there is an HPET",
and whether this has pulled in CONFIG_X_HPET_RUST or CONFIG_HPET_C
is something the rest of QEMU can ignore.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Link: https://lore.kernel.org/r/20250319193110.1565578-3-peter.maydell@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation just allows Linux to determine date and time.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20250223114708.1780-19-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Create a spi buses with distinct names on each socket so that responders
are attached to correct SPI controllers.
Change the bus name to chipX.spi.<busnum> where X = 0..<num_sockets>
QOM tree on a 2 socket machine:
(qemu) info qom-tree
/machine (powernv10-machine)
/chip[0] (power10_v2.0-pnv-chip)
/pib_spic[0] (pnv-spi)
/chip0.spi.0 (SSI)
/xscom-spi[0] (memory-region)
/chip[1] (power10_v2.0-pnv-chip)
/pib_spic[0] (pnv-spi)
/chip1.spi.0 (SSI)
/xscom-spi[0] (memory-region)
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Message-ID: <20250303141328.23991-4-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Added new test for pool interrupts. Removed all printfs from pnv-xive2-* qtests.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Change all printf() in pnv-xive2-* qtests to g_test_message()
[npiggin: split from pool qtest]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for the NVPG and NVC BARs. Access to the BAR pages will
cause backlog counter operations to either increment or decriment
the counter.
Also added qtests for the same.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add XIVE2 tests for group interrupts and group interrupts that have
been backlogged.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since we are about to remove all support for PPC 405, start by
removing the tests referring to the ref405ep machine.
Link: https://lore.kernel.org/qemu-devel/20250110141800.1587589-2-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250204080649.836155-2-clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This commit adds tests to verify the correctness of query attribute
results related to the temperature feature. It ensures that querying
temperature attributes returns expected values.
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-ID: <20250225064243epcms2p8b7b59e7bf381bd68d30a6f59b40dea9f@epcms2p8>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There were recently some crashes that occurred when trying to
retrieve the properties of machines. Let's add a test to avoid
regression here.
Message-ID: <20250123204956.1561463-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All other vhost-user tests here use modern virtio, too, so let's
adjust the vhost-user-net test accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250203124346.169607-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The PCI Local Bus Specification says the result of writes to MSI-X
PBA memory is undefined. QEMU implements them as no-ops, so remove
the pointless write from qpci_msix_pending().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20250117172244.406206-2-npiggin@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch tests whether MCQ initialization and basic read-write
operations work correctly when the MCQ parameter of hw/ufs is enabled.
Acked-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
In legacy doorbell mode, the command descriptor slot matched
the UTRD slot. To maintain consistency in MCQ mode, command descriptor
slot allocation and deallocation now use a bitmap-based approach.
Acked-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Removed dead code related to the unimplemented task
management request.
Acked-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
The qmp_migrate_cancel() command is poorly tested and code inspection
reveals that there might be concurrency issues with its usage. Add a
test that runs a migration and calls qmp_migrate_cancel() at specific
moments.
In order to make the test more deterministic, instead of calling
qmp_migrate_cancel() at random moments during migration, do it after
the migration status change events are seen.
The expected result is that qmp_migrate_cancel() on the source ends
migration on the source with the "cancelled" state and ends migration
on the destination with the "failed" state. The only exception is that
a failed migration should continue in the failed state.
Cancelling is not allowed during postcopy (no test is added for this
because it's a trivial check in the code).
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20250213175927.19642-9-farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Introduce a new migration_test_add_suffix to allow programmatic
creation of tests based on a suffix. Pass the test name into the test
so it can know which variant to run.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20250213175927.19642-8-farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
Choose a few tests per group and move them from the full set to the
smoke set.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20250130184012.5711-3-farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-10-alex.bennee@linaro.org>
Add a new command line option to allow selecting between running the
full set of tests or a smaller set of tests. The default will be to
run the small set (i.e. no comand line option provided) so we can
reduce the amount of tests run by default. Only hosts which support
KVM for the target architecture being tested will run the complete set
of tests.
Adjust the meson.build file to pass in the --full option when
appropriate.
(for now, set the option unconditionally until the next patch actually
creates the small set)
Use cases:
configure --target-list=aarch64-softmmu,ppc64-softmmu,s390x-softmmu,x86_64-softmmu
| before - 615s/244 tests | after - 244s/100 tests
------------------------+--------------------------+-----------------------------
make check | full set for all archs | full set for the KVM arch,
make check-qtest | | small set for the rest
| |
qemu-system-$ARCH | full set for $ARCH | small set for $ARCH, KVM or
./migration-test | | TCG automatically chosen
| |
qemu-system-$ARCH | N/A | full set for $ARCH, KVM or
./migration-test --full | | TCG automatically chosen
| |
migration-compat-x86_64 | full set for x86_64 | small set for x86_64
CI job | |
------------------------+--------------------------+-----------------------------
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20250130184012.5711-2-farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-9-alex.bennee@linaro.org>
Until there are timers enabled the semantics of clock_step_next() will
fail. Since d524441a36 (system/qtest: properly feedback results of
clock_[step|set]) we will signal a FAIL if time doesn't advance.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-4-alex.bennee@linaro.org>
This replicates the changes from 92cb8f8bf6 (tests/qtest: remove
clock_steps from virtio tests) as there are no timers in the virtio
code. We still busy wait and timeout though.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-3-alex.bennee@linaro.org>
All other vhost-user tests here use modern virtio, too, so let's
adjust the vhost-user-net test accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250203124346.169607-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Since commit b14a0b7469 ("accel: Use QOM classes for accel types")
accelerators are registered as QOM objects. Use QOM as a generic
API to query for available accelerators. This is in particular
useful to query hardware accelerators such HFV, Xen or WHPX which
otherwise have their definitions poisoned in "exec/poison.h".
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250130103728.536-3-philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Jamin Lin
Fabiano Rosas
Prasad Pandit
Li Zhijian
Bibo Mao
Thomas Huth
Vladimir Sementsov-Ogievskiy
Greg Kurz
Christian Schoenebeck
Markus Armbruster
Richard Henderson
Philippe Mathieu-Daudé
Peter Maydell
Bernhard Beschow
Chalapathi V
Glenn Miles
Frederic Barrat
Cédric Le Goater
Keoseong Park
Nicholas Piggin
Jeuk Kim
Zhao Liu
Daniel P. Berrangé
Alex Bennée