Create a QMP command to be used for generic ACPI APEI hardware error
injection (HEST) via GHESv2, and add support for it for ARM guests.
Error injection uses ACPI_HEST_SRC_ID_QMP source ID to be platform
independent. This is mapped at arch virt bindings, depending on the
types supported by QEMU and by the BIOS. So, on ARM, this is supported
via ACPI_GHES_NOTIFY_GPIO notification type.
This patch was co-authored:
- original ghes logic to inject a simple ARM record by Shiju Jose;
- generic logic to handle block addresses by Jonathan Cameron;
- generic GHESv2 error inject by Mauro Carvalho Chehab;
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-authored-by: Shiju Jose <shiju.jose@huawei.com>
Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <81e2118b3c8b7e5da341817f277d61251655e0db.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Monolithic files (qapi_nonmodule_outputs) can now be compiled just
once, so we can remove qapi_util_outputs logic.
This removes the need for any specific_ss file.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-13-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
There is no more QAPI files that need to be compiled per target, so we
can remove this. qapi_specific_outputs is now empty, so we can remove
the associated logic in meson.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-12-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_S390X and CONFIG_KVM conditions from the
CPU commands that are conceptually specific to s390x. Top level
stubs are provided to cope with non-s390x targets, or builds
without KVM.
The removal of CONFIG_KVM is justified by the fact there is no
conceptual difference between running 'qemu-system-s390x -accel tcg'
on a build with and without KVM built-in, so apps only using TCG
can't rely on the CONFIG_KVM in the schema.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-11-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This file is now empty and can thus be removed.
Observe the pre-existing bug with s390-skeys.c and target/i386/monitor.c
both including qapi-commands-misc-target.h despite not requiring it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-8-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_ARM condition from the query-gic-capability
command. This requires providing a QMP command stub for non-ARM targets.
This in turn requires moving the command out of misc-target.json, since
that will trigger symbol poisoning errors when built from target
independent code.
Following the earlier precedent, this creates a misc-arm.json file to
hold this ARM specific command.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-5-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the rtc-reset-reinjection
command. This requires providing a QMP command stub for non-i386 target.
This in turn requires moving the command out of misc-target.json, since
that will trigger symbol poisoning errors when built from target
independent code.
Rather than putting the command into misc.json, it is proposed to create
misc-$TARGET.json files to hold commands whose impl is conceptually
only applicable to a single target. This gives an obvious docs hint to
consumers that the command is only useful in relation a specific target,
while misc.json is for commands applicable to 2 or more targets.
The current impl of qmp_rtc_reset_reinject() is a no-op if the i386
RTC is disabled in Kconfig, or if the running machine type lack any
RTC device.
The stub impl for non-i386 targets retains this no-op behaviour.
However, it is now reporting an Error mentioning this command is not
available for current target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-2-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Define qapi schema for the uefi variable store state.
Use it and the generated visitor helper functions to store persistent
(EFI_VARIABLE_NON_VOLATILE) variables in JSON format on disk.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20250225163031.1409078-15-kraxel@redhat.com>
[ incremental fix squashed in ]
Message-ID: <pji24p6oag7cn2rovus7rquo7q2c6tokuquobfro2sqorky7vu@tk7cxud6jw7f>
Add a new QAPI event for VFIO migration. This event will be emitted when
a VFIO device changes its migration state, for example, during migration
or when stopping/starting the guest.
This event can be used by management applications to get updates on the
current state of the VFIO device for their own purposes.
Note that this new event is introduced since VFIO devices have a unique
set of migration states which cannot be described as accurately by other
existing events such as run state or migration status.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The whole RDMA subsystem was deprecated in commit e9a54265f5
("hw/rdma: Deprecate the pvrdma device and the rdma subsystem")
released in v8.2.
Remove:
- PVRDMA device
- generated vmw_pvrdma/ directory from linux-headers
- rdmacm-mux tool from contrib/
Cc: Yuval Shaia <yuval.shaia.ml@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240328130255.52257-2-philmd@linaro.org>
Now, the binary objects may be retrieved by id.
It would require for future qmp commands that may require specific
eBPF blob.
Added command "request-ebpf". This command returns
eBPF program encoded base64. The program taken from the
skeleton and essentially is an ELF object that can be
loaded in the future with libbpf.
The reason to use the command to provide the eBPF object
instead of a separate artifact was to avoid issues related
to finding the eBPF itself. eBPF object is an ELF binary
that contains the eBPF program and eBPF map description(BTF).
Overall, eBPF object should contain the program and enough
metadata to create/load eBPF with libbpf. As the eBPF
maps/program should correspond to QEMU, the eBPF can't
be used from different QEMU build.
The first solution was a helper that comes with QEMU
and loads appropriate eBPF objects. And the issue is
to find a proper helper if the system has several
different QEMUs installed and/or built from the source,
which helpers may not be compatible.
Another issue is QEMU updating while there is a running
QEMU instance. With an updated helper, it may not be
possible to hotplug virtio-net device to the already
running QEMU. Overall, requesting the eBPF object from
QEMU itself solves possible failures with acceptable effort.
Links:
[PATCH 3/5] qmp: Added the helper stamp check.
https://lore.kernel.org/all/20230219162100.174318-4-andrew@daynix.com/
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
S390 adds two new SMP levels, drawers and books to the CPU
topology.
S390 CPUs have specific topology features like dedication and
entitlement. These indicate to the guest information on host
vCPU scheduling and help the guest make better scheduling decisions.
Add the new levels to the relevant QAPI structs.
Add all the supported topology levels, dedication and entitlement
as properties to S390 CPUs.
Create machine-common.json so we can later include it in
machine-target.json also.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-3-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CXL uses PCI AER Internal errors to signal to the host that an error has
occurred. The host can then read more detailed status from the CXL RAS
capability.
For uncorrectable errors: support multiple injection in one operation
as this is needed to reliably test multiple header logging support in an
OS. The equivalent feature doesn't exist for correctable errors, so only
one error need be injected at a time.
Note:
- Header content needs to be manually specified in a fashion that
matches the specification for what can be in the header for each
error type.
Injection via QMP:
{ "execute": "qmp_capabilities" }
...
{ "execute": "cxl-inject-uncorrectable-errors",
"arguments": {
"path": "/machine/peripheral/cxl-pmem0",
"errors": [
{
"type": "cache-address-parity",
"header": [ 3, 4]
},
{
"type": "cache-data-parity",
"header": [0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31]
},
{
"type": "internal",
"header": [ 1, 2, 4]
}
]
}}
...
{ "execute": "cxl-inject-correctable-error",
"arguments": {
"path": "/machine/peripheral/cxl-pmem0",
"type": "physical"
} }
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230302133709.30373-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce QCryptodevBackendType in cryptodev.json, also apply this to
related codes. Then we can drop 'enum CryptoDevBackendOptionsType'.
Note that `CRYPTODEV_BACKEND_TYPE_NONE` is *NOT* used by anywhere, so
drop it(no 'none' enum in QCryptodevBackendType).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If configuring with "--disable-system --disable-user --enable-guest-agent"
the linking currently fails with:
qga/qemu-ga.p/commands.c.o: In function `qmp_command_info':
build/../../home/thuth/devel/qemu/qga/commands.c:70: undefined reference to `qmp_command_name'
build/../../home/thuth/devel/qemu/qga/commands.c:71: undefined reference to `qmp_command_is_enabled'
build/../../home/thuth/devel/qemu/qga/commands.c:72: undefined reference to `qmp_has_success_response'
qga/qemu-ga.p/commands.c.o: In function `qmp_guest_info':
build/../../home/thuth/devel/qemu/qga/commands.c:82: undefined reference to `qmp_for_each_command'
qga/qemu-ga.p/commands.c.o: In function `qmp_guest_exec':
build/../../home/thuth/devel/qemu/qga/commands.c:410: undefined reference to `qbase64_decode'
qga/qemu-ga.p/channel-posix.c.o: In function `ga_channel_open':
build/../../home/thuth/devel/qemu/qga/channel-posix.c:214: undefined reference to `unix_listen'
build/../../home/thuth/devel/qemu/qga/channel-posix.c:228: undefined reference to `socket_parse'
build/../../home/thuth/devel/qemu/qga/channel-posix.c:234: undefined reference to `socket_listen'
qga/qemu-ga.p/commands-posix.c.o: In function `qmp_guest_file_write':
build/../../home/thuth/devel/qemu/qga/commands-posix.c:527: undefined reference to `qbase64_decode'
Let's make sure that we also compile and link the required files if
the system emulators have not been enabled.
Message-Id: <20221110083626.31899-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This new command lists all the instances of VirtIODevices with
their canonical QOM path and name.
[Jonah: @virtio_list duplicates information that already exists in
the QOM composition tree. However, extracting necessary information
from this tree seems to be a bit convoluted.
Instead, we still create our own list of realized virtio devices
but use @qmp_qom_get with the device's canonical QOM path to confirm
that the device exists and is realized. If the device exists but
is actually not realized, then we remove it from our list (for
synchronicity to the QOM composition tree).
Also, the QMP command @x-query-virtio is redundant as @qom-list
and @qom-get are sufficient to search '/machine/' for realized
virtio devices. However, @x-query-virtio is much more convenient
in listing realized virtio devices.]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gathering statistics is important for development, for monitoring and
for performance measurement. There are tools such as kvm_stat that do
this and they rely on the _user_ knowing the interesting data points
rather than the tool (which can treat them as opaque).
The commands introduced in this commit introduce QMP support for
querying stats; the goal is to take the capabilities of these tools
and making them available throughout the whole virtualization stack,
so that one can observe, monitor and measure virtual machines without
having shell access + root on the host that runs them.
query-stats returns a list of all stats per target type (only VM
and vCPU to start); future commits add extra options for specifying
stat names, vCPU qom paths, and providers. All these are used by the
HMP command "info stats". Because of the development usecases around
statistics, a good HMP interface is important.
query-stats-schemas returns a list of stats included in each target
type, with an option for specifying the provider. The concepts in the
schema are based on the KVM binary stats' own introspection data, just
translated to QAPI.
There are two reasons to have a separate schema that is not tied to
the QAPI schema. The first is the contents of the schemas: the new
introspection data provides different information than the QAPI data,
namely unit of measurement, how the numbers are gathered and change
(peak/instant/cumulative/histogram), and histogram bucket sizes.
There's really no reason to have this kind of metadata in the QAPI
introspection schema (except possibly for the unit of measure, but
there's a very weak justification).
Another reason is the dynamicity of the schema. The QAPI introspection
data is very much static; and while QOM is somewhat more dynamic,
generally we consider that to be a bug rather than a feature these days.
On the other hand, the statistics that are exposed by QEMU might be
passed through from another source, such as KVM, and the disadvantages of
manually updating the QAPI schema for outweight the benefits from vetting
the statistics and filtering out anything that seems "too unstable".
Running old QEMU with new kernel is a supported usecase; if old QEMU
cannot expose statistics from a new kernel, or if a kernel developer
needs to change QEMU before gathering new info from the new kernel,
then that is a poor user interface.
The framework provides a method to register callbacks for these QMP
commands. Most of the work in fact is done by the callbacks, and a
large majority of this patch is new QAPI structs and commands.
Examples (with KVM stats):
- Query all VM stats:
{ "execute": "query-stats", "arguments" : { "target": "vm" } }
{ "return": [
{ "provider": "kvm",
"stats": [
{ "name": "max_mmu_page_hash_collisions", "value": 0 },
{ "name": "max_mmu_rmap_size", "value": 0 },
{ "name": "nx_lpage_splits", "value": 148 },
... ] },
{ "provider": "xyz",
"stats": [ ... ] }
] }
- Query all vCPU stats:
{ "execute": "query-stats", "arguments" : { "target": "vcpu" } }
{ "return": [
{ "provider": "kvm",
"qom_path": "/machine/unattached/device[0]"
"stats": [
{ "name": "guest_mode", "value": 0 },
{ "name": "directed_yield_successful", "value": 0 },
{ "name": "directed_yield_attempted", "value": 106 },
... ] },
{ "provider": "kvm",
"qom_path": "/machine/unattached/device[1]"
"stats": [
{ "name": "guest_mode", "value": 0 },
{ "name": "directed_yield_successful", "value": 0 },
{ "name": "directed_yield_attempted", "value": 106 },
... ] },
] }
- Retrieve the schemas:
{ "execute": "query-stats-schemas" }
{ "return": [
{ "provider": "kvm",
"target": "vcpu",
"stats": [
{ "name": "guest_mode",
"unit": "none",
"base": 10,
"exponent": 0,
"type": "instant" },
{ "name": "directed_yield_successful",
"unit": "none",
"base": 10,
"exponent": 0,
"type": "cumulative" },
... ]
},
{ "provider": "kvm",
"target": "vm",
"stats": [
{ "name": "max_mmu_page_hash_collisions",
"unit": "none",
"base": 10,
"exponent": 0,
"type": "peak" },
... ]
},
{ "provider": "xyz",
"target": "vm",
"stats": [ ... ]
}
] }
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't generate trace events for tests/ and qga/ because that it is
not simple and not necessary. We have corresponding comments in both
tests/meson.build and qga/meson.build.
Still to not miss possible future qapi code generation call, and not to
forget to enable trace events generation, let's enable it by default.
So, turn option --gen-trace into opposite --no-trace-events and use new
option only in tests/ and qga/ where we already have good comments why
we don't generate trace events code.
Note that this commit enables trace-events generation for qapi-gen.py
call from tests/qapi-schema/meson.build and storage-daemon/meson.build.
Still, both are kind of noop: tests/qapi-schema/ doesn't seem to
generate any QMP command code and no .trace-events files anyway,
storage-daemon/ uses common QMP command implementations and just
generate empty .trace-events
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-8-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
1. Use --gen-trace when generate qmp commands
2. Add corresponding .trace-events files as outputs in qapi_files
custom target
3. Define global qapi_trace_events list of .trace-events file targets,
to fill in trace/qapi.build and to use in trace/meson.build
4. In trace/meson.build use the new array as an additional source of
.trace_events files to be processed
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-5-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This provides a foundation on which to convert simple HMP commands to
use QMP. The QMP implementation will generate formatted text targeted
for human consumption, returning it in the HumanReadableText data type.
The HMP command handler will simply print out the formatted string
within the HumanReadableText data type. Since this will be an entirely
formulaic action in the case of HMP commands taking no arguments, a
custom command handler is provided.
Thus instead of registering a 'cmd' callback for the HMP command, a
'cmd_info_hrt' callback is provided, which will simply be a pointer
to the QMP implementation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This new adaptor visitor takes a single field of the adaptee, and exposes it
with a different name.
This will be used for QOM alias properties. Alias targets can of course
have a different name than the alias property itself (e.g. a machine's
pflash0 might be an alias of a property named 'drive'). When the target's
getter or setter invokes the visitor, it will use a different name than
what the caller expects, and the visitor will not be able to find it
(or will consume erroneously).
The solution is for alias getters and setters to wrap the incoming
visitor, and forward the sole field that the target is expecting while
renaming it appropriately.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several issues has been reported for query-netdev info
series. Consider it's late in the rc, this reverts commit
a0724776c5.
Signed-off-by: Jason Wang <jasowang@redhat.com>
New option -compat lets you configure what to do when deprecated
interfaces get used. This is intended for testing users of the
management interfaces. It is experimental.
-compat deprecated-input=<input-policy> configures what to do when
deprecated input is received. Input policy can be "accept" (accept
silently), or "reject" (reject the request with an error).
-compat deprecated-output=<out-policy> configures what to do when
deprecated output is sent. Output policy can be "accept" (pass on
unchanged), or "hide" (filter out the deprecated parts).
Default is "accept". Policies other than "accept" are implemented
later in this series.
For now, -compat covers only syntactic aspects of QMP, i.e. stuff
tagged with feature 'deprecated'. We may want to extend it to cover
semantic aspects, CLI, and experimental features.
Note that there is no good way for management application to detect
presence of -compat: it's not visible output of query-qmp-schema or
query-command-line-options. Tolerable, because it's meant for
testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
Replace usage of legacy field info_str of NetClientState for backend
network devices with QAPI NetdevInfo stored_config that already used
in QMP query-netdev.
This change increases the detail of the "info network" output and takes
a more general approach to composing the output.
NIC and hubports still use legacy info_str field.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We removed the QMP loop in user-mode builds in commit 1935e0e4e0
("qapi/meson: Remove QMP from user-mode emulation"), now commands
and events code is unreachable.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210224171642.3242293-1-philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-13-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-12-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-11-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Beside a CPU device, user-mode emulation doesn't access
anything else from qdev subsystem.
Tools don't need anything from qdev.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The yank feature allows to recover from hanging qemu by "yanking"
at various parts. Other qemu systems can register themselves and
multiple yank functions. Then all yank functions for selected
instances can be called by the 'yank' out-of-band qmp command.
Available instances can be queried by a 'query-yank' oob command.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <69934ceacfd33a7dfe53db145ecc630ad39ee47c.1609167865.git.lukasstraub2@web.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch adds replay.json file. It will be
used for adding record/replay-related data structures and commands.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <160174519444.12451.3472949430004845434.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move all block export related types and commands from block-core to the
new QAPI module block-export.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-3-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert qemu-qmp-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.
The qemu-qmp-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.
Again, we drop the direct link from index.html.in now that
the QMP ref is part of the interop manual.
This commit removes the code from the root meson.build file that
handled the various Texinfo-based outputs, because we no longer
generate any documentation except for the Sphinx HTML manuals and the
manpages, and the code can't handle having an empty list of files
to process.. We'll do further cleanup of the remainders of
Texinfo support in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-10-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added, "make html" fixed,
storage-daemon/qapi/meson.build updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Extracting the PCI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-9-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Extracting the ACPI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-8-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mauro Carvalho Chehab
Philippe Mathieu-Daudé
Pierrick Bouvier
Daniel P. Berrangé
Gerd Hoffmann
Avihai Horon
Andrew Melnychenko
Pierre Morel
Jonathan Cameron
zhenwei pi
Thomas Huth
Laurent Vivier
Paolo Bonzini
Mark Kanda
Vladimir Sementsov-Ogievskiy
Jason Wang
Markus Armbruster
Alexey Kirillov
Philippe Mathieu-Daudé
Lukas Straub
Pavel Dovgalyuk
Kevin Wolf
Peter Maydell
Marc-André Lureau