When the guest writes to the RTC, the write is intercepted and emulated
by Xen and the time difference is broadcasted as a TIMEOFFSET ioreq.
Emit an RTC_CHANGE QMP event when this happens rather than ignoring it
so that something can make use of the information (e.g. the toolstack
can persist it between VM starts).
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Message-ID: <20260108135406.1879210-1-ross.lagerwall@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
When the '--enable-trace-backends=syslog' build option is configured,
the following compilation error is encountered.
In file included from /usr/include/sys/syslog.h:207,
from /usr/include/syslog.h:1,
from ./trace/trace-hw_xen.h:224,
from ../hw/xen/trace.h:1,
from ../hw/xen/xen-bus-helper.c:13:
In function ‘syslog’,
inlined from ‘_nocheck__trace_xs_node_read’ at ../hw/xen/trace-events:41:9,
inlined from ‘trace_xs_node_read’ at trace/trace-hw_xen.h:903:9,
inlined from ‘xs_node_read’ at ../hw/xen/xen-bus-helper.c:154:5:
/usr/include/bits/syslog.h:45:3: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
45 | __syslog_chk (__pri, __USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add a check that 'value' is not null before passing it to trace_xs_node_read().
Fixes: e6cdeee959 ("hw/xen: Add xs_node_read() helper function")
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Message-ID: <20250523160134.218997-1-liam.merwick@oracle.com>
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Add a machine property to enable/disable the mapcache.
Default it to enabled for backwards compatibility.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a mapcache argument to xen_register_ioreq() allowing
the caller to optionally disable the mapcache.
All callers still call it with mapcache = true so there's no
functional change yet.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add function to check if the mapcache is enabled.
No functional change.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Assert that the mapcache was created prior to being used.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This touches code in xen_enable_tpm() that is obviously wrong. Since
I don't know how to fix it properly, I'm adding a FIXME there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20251119130855.105479-6-armbru@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Move RAMBlock functions out of ram_addr.h and cpu-common.h;
move memory API headers out of include/exec and into include/system.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now than hw/xen/ files don't use any target-specific code,
we can build all file units once, removing the need for the
xen_specific_ss[] source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20251022140114.72372-4-philmd@linaro.org>
Both are equivalent:
target_long_bits()
sizeof(target_u?long) * BITS_PER_BYTE
Prefer the former which is target-agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20251022140114.72372-3-philmd@linaro.org>
Replace magic 8 by BITS_PER_BYTE, use MAKE_64BIT_MASK()
instead of open coding it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20251022140114.72372-2-philmd@linaro.org>
It's currently impossible for passthrough devices on segment different
than 0 to work correctly, as the PCI domain is not provided to
xc_physdev_map_pirq_msi(), and hence it's unconditionally assumed that
all devices are on segment 0.
Adjust the call to xc_physdev_map_pirq_msi() to pass the PCI domain in
the high 16bits of the bus parameter. On versions of Xen where this
is not supported the passed segment will be ignored and assume to be 0,
no worse than the current state.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Frediano Ziglio <freddy77@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20251017155136.16540-1-roger.pau@citrix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
cpu_physical_memory_rw() is legacy, replace by address_space_rw().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251002084203.63899-13-philmd@linaro.org>
Children are automatically unparented so manually unparenting is
unnecessary.
Worse, automatic unparenting happens before the instance_finalize()
callback of the parent gets called, so object_unparent() calls in
the callback will refer to objects that are already unparented, which
is semantically incorrect.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20250924-use-v4-7-07c6c598f53d@rsg.ci.i.u-tokyo.ac.jp
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit cfcacbab38 ("xen/passthrough: use gsi to map pirq when
dom0 is PVH") an `error_report` was added to this file, but the
corresponding include of `qemu/error-report.h` was missed. This
only becomes apparent when building against Xen 4.20+ with trace
backend log disabled.
Fixes: cfcacbab38 (xen/passthrough: use gsi to map pirq when dom0 is PVH)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250717220207.171040-1-awilliam@redhat.com>
[PMD: Improved commit description, added Fixes: tag]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Today, we don't track write-abiliy in the cache, if a user
requests a readable mapping followed by a writeable mapping
on the same page, the second lookup will incorrectly hit
the readable entry.
Split mapcache_grants by ro and rw access. Grants will now
have separate ways in the cache depending on writeability.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
If we have request without lock and hit unlocked or invalid
entry during the search, we remap it immediately,
even if we have matching entry in next entries in bucket.
This leads to duplication of mappings of the same size,
and to possibility of selecting the wrong element
during invalidation and underflow it's entry->lock counter
Signed-off-by: Aleksandr Partanen <alex.pentagrid@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Those symbols are used by system/physmem.c, and are called only if
xen_enabled() (which happens only if CONFIG_XEN is set and xen is
available).
So we can crash the stubs in case those are called, as they are linked
only when CONFIG_XEN is not set.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250317183417.285700-13-pierrick.bouvier@linaro.org>
xen_bus_realize() reports a failure to set up a watch as error, but it
doesn't treat it as one: it simply continues. Report a warning
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250314143500.2449658-3-armbru@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
xen_bus_realize() is wrong that way: it passes &local_err to
xs_node_watch() in a loop. If this fails in more than one iteration,
it can trip error_setv()'s assertion.
Fix by clearing @local_err.
Fixes: c4583c8c39 (xen-bus: reduce scope of backend watch)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250314143500.2449658-2-armbru@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
On IOREQ_TYPE_INVALIDATE we need to invalidate the mapcache for regular
mappings. Since recently we started reusing the mapcache also to keep
track of grants mappings. However, there is no need to remove grant
mappings on IOREQ_TYPE_INVALIDATE requests, we shouldn't do that. So
remove the function call.
Fixes: 9ecdd4bf08 (xen: mapcache: Add support for grant mappings)
Cc: qemu-stable@nongnu.org
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Message-Id: <20250206194915.3357743-2-edgar.iglesias@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
In PVH dom0, when passthrough a device to domU, QEMU code
xen_pt_realize->xc_physdev_map_pirq wants to use gsi, but in current codes
the gsi number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different spaces, so
pirq mapping fails.
To solve above problem, use new interface of Xen, xc_pcidev_get_gsi to get
gsi and use xc_physdev_map_pirq_gsi to map pirq when dom0 is PVH.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Acked-by: Anthony PERARD <anthony@xenproject.org>
Reviewed-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Message-Id: <20241106061418.3655304-1-Jiqian.Chen@amd.com>
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Have "hw/xen/xen-hvm-common.h" include the bare minimal set
of headers. Adapt sources to avoid errors when refactoring
unrelated headers such:
include/hw/xen/xen-hvm-common.h:71:5: error: unknown type name ‘xenevtchn_handle’
71 | xenevtchn_handle *xce_handle;
| ^~~~~~~~~~~~~~~~
hw/xen/xen-hvm-common.c: In function ‘cpu_get_ioreq’:
hw/xen/xen-hvm-common.c:227:13: error: implicit declaration of function ‘hw_error’
227 | hw_error("Fatal error while trying to get io event!\n");
| ^~~~~~~~
| herror
hw/xen/xen-hvm-common.c: In function ‘handle_ioreq’:
hw/xen/xen-hvm-common.c:446:34: error: ‘target_ulong’ undeclared (first use in this function)
446 | (req->size < sizeof (target_ulong))) {
| ^~~~~~~~~~~~
hw/i386/xen/xen-hvm.c: In function ‘xen_add_to_physmap’:
hw/i386/xen/xen-hvm.c:298:22: error: implicit declaration of function ‘xen_replace_cache_entry’
298 | uint8_t *p = xen_replace_cache_entry(phys_offset, start_addr, size);
| ^~~~~~~~~~~~~~~~~~~~~~~
hw/i386/xen/xen-hvm.c:314:9: error: implicit declaration of function 'error_report' is invalid in C99
314 | error_report("relocate_memory %lu pages from GFN %"HWADDR_PRIx
^~~~~~~~~~~~
hw/i386/xen/xen-hvm.c: In function ‘xen_log_global_start’:
hw/i386/xen/xen-hvm.c:465:9: error: implicit declaration of function ‘xen_enabled’
465 | if (xen_enabled()) {
| ^~~~~~~~~~~
hw/i386/xen/xen-hvm.c: In function ‘regs_to_cpu’:
hw/i386/xen/xen-hvm.c:487:5: error: unknown type name ‘X86CPU’
487 | X86CPU *cpu;
| ^~~~~~
hw/i386/xen/xen-hvm.c:492:15: error: ‘R_EAX’ undeclared (first use in this function)
492 | env->regs[R_EAX] = req->data;
| ^~~~~
| REG_RAX
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Message-Id: <20250218162618.46167-6-philmd@linaro.org>
Have "hw/xen/xen-pvh-common.h" include the bare minimal set
of headers. Adapt sources to avoid errors when refactoring
unrelated headers such:
hw/i386/xen/xen-pvh.c: In function ‘xen_pvh_machine_class_init’:
hw/i386/xen/xen-pvh.c:84:28: error: ‘TARGET_DEFAULT_CPU_TYPE’ undeclared (first use in this function)
84 | mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
| ^~~~~~~~~~~~~~~~~~~~~~~
hw/xen/xen-pvh-common.c: In function ‘xen_pvh_init’:
hw/xen/xen-pvh-common.c:217:43: error: ‘MiB’ undeclared (first use in this function)
217 | if (s->cfg.pci_ecam.size != 256 * MiB) {
| ^~~
hw/xen/xen-hvm-common.c:18:6: error: no previous prototype for ‘xen_mr_is_memory’ [-Werror=missing-prototypes]
18 | bool xen_mr_is_memory(MemoryRegion *mr)
| ^~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20250218162618.46167-5-philmd@linaro.org>
A number of machines create an if=sd drive by default even though
they lack an SD bus, and therefore cannot use the drive.
This drive is created when the machine sets flag
@auto_create_sdcard.
See for example running HMP "info block" on the HPPA C3700 machine:
$ qemu-system-hppa -M C3700 -monitor stdio -S
(qemu) info block
floppy0: [not inserted]
Removable device: not locked, tray closed
sd0: [not inserted]
Removable device: not locked, tray closed
$ qemu-system-hppa -M C3700 -sd /bin/sh
qemu-system-hppa: -sd /bin/sh: machine type does not support if=sd,bus=0,unit=0
Delete that from machines that lack an SD bus.
Note, only the ARM and RISCV targets use such feature:
$ git grep -wl IF_SD hw | cut -d/ -f-2 | sort -u
hw/arm
hw/riscv
$
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-5-philmd@linaro.org>
Invert the 'no_sdcard' logic, renaming it as the more explicit
"auto_create_sdcard". Machines are supposed to create a SD Card
drive when this flag is set. In many cases it doesn't make much
sense (as boards don't expose SD Card host controller), but this
is patch only aims to expose that nonsense; so no logical change
intended (mechanical patch using gsed).
Most of the changes are:
- mc->no_sdcard = ON_OFF_AUTO_OFF;
+ mc->auto_create_sdcard = true;
Except in
. hw/core/null-machine.c
. hw/arm/xilinx_zynq.c
. hw/s390x/s390-virtio-ccw.c
where the disabled option is manually removed (since default):
- mc->no_sdcard = ON_OFF_AUTO_ON;
+ mc->auto_create_sdcard = false;
- mc->auto_create_sdcard = false;
and in system/vl.c we change the 'default_sdcard' type to boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-4-philmd@linaro.org>
Update MachineClass::no_sdcard default implicit AUTO
initialization to explicit OFF. This flag is consumed
in system/vl.c::qemu_disable_default_devices(). Use
this place to assert we don't have anymore AUTO state.
In hw/ppc/e500.c we add the ppce500_machine_class_init()
method to initialize once all the inherited classes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-3-philmd@linaro.org>
Because the legacy Xen backend devices can optionally be plugged on the
TYPE_PLATFORM_BUS_DEVICE, have it inherit TYPE_DYNAMIC_SYS_BUS_DEVICE.
Remove the implicit TYPE_XENSYSDEV instance_size.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20250125181343.59151-10-philmd@linaro.org>
Makes the code less sensitive regarding changes in the class hierarchy which
will be performed in the next patch.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250127094129.15941-1-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Reduce some duplication.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
The 'm' parameter used to request auto-allocation of the destination variable
is not supported on FreeBSD, and as such leads to failures to parse.
What's more, the current usage of '%ms' with xs_node_scanf() is pointless, as
it just leads to a double allocation of the same string. Instead use
xs_node_read() to read the whole xenstore node.
Fixes: a783f8ad4e ('xen: add a mechanism to automatically create XenDevice-s...')
Fixes: 9b77374690 ('hw/xen: update Xen console to XenDevice model')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
This returns the full contents of the node, having created the node path
from the printf-style format string provided in its arguments.
This will save various callers from having to do so for themselves (and
from using xs_node_scanf() with the non-portable %ms format string.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
[remove double newline and constify trace parameters]
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Some boards such as vmapple don't do real legacy PCI IRQ swizzling.
Instead, they just keep allocating more board IRQ lines for each new
legacy IRQ. Let's support that mode by giving instantiators a new
"nr_irqs" property they can use to support more than 4 legacy IRQ lines.
In this mode, GPEX will export more IRQ lines, one for each device.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241223221645.29911-9-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Now that all of the Property arrays are counted, we can remove
the terminator object from each array. Update the assertions
in device_class_set_props to match.
With struct Property being 88 bytes, this was a rather large
form of terminator. Saves 30k from qemu-system-aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no point in registering no properties.
Remove xen_sysdev_class_init entirely, as it did nothing else.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-10-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ross Lagerwall
Liam Merwick
Edgar E. Iglesias
Markus Armbruster
Paolo Bonzini
Philippe Mathieu-Daudé
Roger Pau Monne
Akihiko Odaki
Adam Williamson
Michael Tokarev
Aleksandr Partanen
Pierrick Bouvier
Stefano Stabellini
Jiqian Chen
Bernhard Beschow
Daniel P. Berrangé
David Woodhouse
Alexander Graf
Richard Henderson