hw/timer/bcm2835: Add the BCM2835 SYS_timer

Add the 64-bit free running timer. Do not model the COMPARE register (no IRQ generated). This timer is used by Linux kernel and recently U-Boot: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/bcm2835_timer.c?h=v3.7 https://github.com/u-boot/u-boot/blob/v2019.07/include/configs/rpi.h#L19 Datasheet used: https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-4-f4bug@amsat.org [PMM: squashed in switch to using memset in reset] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7 years ago · d05be883fc
4 changed files with 202 additions and 0 deletions
--- a/hw/timer/Makefile.objs
+++ b/hw/timer/Makefile.objs
@ -47,3 +47,4 @@ common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o
 common-obj-$(CONFIG_CMSDK_APB_TIMER) += cmsdk-apb-timer.o
 common-obj-$(CONFIG_CMSDK_APB_DUALTIMER) += cmsdk-apb-dualtimer.o
 common-obj-$(CONFIG_MSF2) += mss-timer.o
+common-obj-$(CONFIG_RASPI) += bcm2835_systmr.o
--- a/hw/timer/bcm2835_systmr.c
+++ b/hw/timer/bcm2835_systmr.c
@ -0,0 +1,163 @@
+/*
+ * BCM2835 SYS timer emulation
+ *
+ * Copyright (C) 2019 Philippe Mathieu-Daudé <f4bug@amsat.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Datasheet: BCM2835 ARM Peripherals (C6357-M-1398)
+ * https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
+ *
+ * Only the free running 64-bit counter is implemented.
+ * The 4 COMPARE registers and the interruption are not implemented.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/timer.h"
+#include "hw/timer/bcm2835_systmr.h"
+#include "hw/registerfields.h"
+#include "migration/vmstate.h"
+#include "trace.h"
+
+REG32(CTRL_STATUS,  0x00)
+REG32(COUNTER_LOW,  0x04)
+REG32(COUNTER_HIGH, 0x08)
+REG32(COMPARE0,     0x0c)
+REG32(COMPARE1,     0x10)
+REG32(COMPARE2,     0x14)
+REG32(COMPARE3,     0x18)
+
+static void bcm2835_systmr_update_irq(BCM2835SystemTimerState *s)
+{
+    bool enable = !!s->reg.status;
+
+    trace_bcm2835_systmr_irq(enable);
+    qemu_set_irq(s->irq, enable);
+}
+
+static void bcm2835_systmr_update_compare(BCM2835SystemTimerState *s,
+                                          unsigned timer_index)
+{
+    /* TODO fow now, since neither Linux nor U-boot use these timers. */
+    qemu_log_mask(LOG_UNIMP, "COMPARE register %u not implemented\n",
+                  timer_index);
+}
+
+static uint64_t bcm2835_systmr_read(void *opaque, hwaddr offset,
+                                    unsigned size)
+{
+    BCM2835SystemTimerState *s = BCM2835_SYSTIMER(opaque);
+    uint64_t r = 0;
+
+    switch (offset) {
+    case A_CTRL_STATUS:
+        r = s->reg.status;
+        break;
+    case A_COMPARE0 ... A_COMPARE3:
+        r = s->reg.compare[(offset - A_COMPARE0) >> 2];
+        break;
+    case A_COUNTER_LOW:
+    case A_COUNTER_HIGH:
+        /* Free running counter at 1MHz */
+        r = qemu_clock_get_us(QEMU_CLOCK_VIRTUAL);
+        r >>= 8 * (offset - A_COUNTER_LOW);
+        r &= UINT32_MAX;
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: bad offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+    trace_bcm2835_systmr_read(offset, r);
+
+    return r;
+}
+
+static void bcm2835_systmr_write(void *opaque, hwaddr offset,
+                                 uint64_t value, unsigned size)
+{
+    BCM2835SystemTimerState *s = BCM2835_SYSTIMER(opaque);
+
+    trace_bcm2835_systmr_write(offset, value);
+    switch (offset) {
+    case A_CTRL_STATUS:
+        s->reg.status &= ~value; /* Ack */
+        bcm2835_systmr_update_irq(s);
+        break;
+    case A_COMPARE0 ... A_COMPARE3:
+        s->reg.compare[(offset - A_COMPARE0) >> 2] = value;
+        bcm2835_systmr_update_compare(s, (offset - A_COMPARE0) >> 2);
+        break;
+    case A_COUNTER_LOW:
+    case A_COUNTER_HIGH:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: read-only ofs 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: bad offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+}
+
+static const MemoryRegionOps bcm2835_systmr_ops = {
+    .read = bcm2835_systmr_read,
+    .write = bcm2835_systmr_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};
+
+static void bcm2835_systmr_reset(DeviceState *dev)
+{
+    BCM2835SystemTimerState *s = BCM2835_SYSTIMER(dev);
+
+    memset(&s->reg, 0, sizeof(s->reg));
+}
+
+static void bcm2835_systmr_realize(DeviceState *dev, Error **errp)
+{
+    BCM2835SystemTimerState *s = BCM2835_SYSTIMER(dev);
+
+    memory_region_init_io(&s->iomem, OBJECT(dev), &bcm2835_systmr_ops,
+                          s, "bcm2835-sys-timer", 0x20);
+    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
+    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+}
+
+static const VMStateDescription bcm2835_systmr_vmstate = {
+    .name = "bcm2835_sys_timer",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(reg.status, BCM2835SystemTimerState),
+        VMSTATE_UINT32_ARRAY(reg.compare, BCM2835SystemTimerState, 4),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void bcm2835_systmr_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = bcm2835_systmr_realize;
+    dc->reset = bcm2835_systmr_reset;
+    dc->vmsd = &bcm2835_systmr_vmstate;
+}
+
+static const TypeInfo bcm2835_systmr_info = {
+    .name = TYPE_BCM2835_SYSTIMER,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(BCM2835SystemTimerState),
+    .class_init = bcm2835_systmr_class_init,
+};
+
+static void bcm2835_systmr_register_types(void)
+{
+    type_register_static(&bcm2835_systmr_info);
+}
+
+type_init(bcm2835_systmr_register_types);
--- a/hw/timer/trace-events
+++ b/hw/timer/trace-events
@ -87,3 +87,8 @@ pl031_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 pl031_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 pl031_alarm_raised(void) "alarm raised"
 pl031_set_alarm(uint32_t ticks) "alarm set for %u ticks"
+
+# bcm2835_systmr.c
+bcm2835_systmr_irq(bool enable) "timer irq state %u"
+bcm2835_systmr_read(uint64_t offset, uint64_t data) "timer read: offset 0x%" PRIx64 " data 0x%" PRIx64
+bcm2835_systmr_write(uint64_t offset, uint64_t data) "timer write: offset 0x%" PRIx64 " data 0x%" PRIx64
--- a/include/hw/timer/bcm2835_systmr.h
+++ b/include/hw/timer/bcm2835_systmr.h
@ -0,0 +1,33 @@
+/*
+ * BCM2835 SYS timer emulation
+ *
+ * Copyright (c) 2019 Philippe Mathieu-Daudé <f4bug@amsat.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef BCM2835_SYSTIMER_H
+#define BCM2835_SYSTIMER_H
+
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+
+#define TYPE_BCM2835_SYSTIMER "bcm2835-sys-timer"
+#define BCM2835_SYSTIMER(obj) \
+    OBJECT_CHECK(BCM2835SystemTimerState, (obj), TYPE_BCM2835_SYSTIMER)
+
+typedef struct {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion iomem;
+    qemu_irq irq;
+
+    struct {
+        uint32_t status;
+        uint32_t compare[4];
+    } reg;
+} BCM2835SystemTimerState;
+
+#endif