hw/arm/aspeed: Invert sdhci write protected pin for AST2600 EVB

The Write Protect pin of SDHCI model is default active low to match the SDHCI
spec. So, write enable the bit 19 should be 1 and write protected the bit 19
should be 0 at the Present State Register (0x24).

According to the design of AST2600 EVB, the Write Protected pin is active
high by default. To support it, introduces a new "sdhci_wp_inverted"
property in ASPEED MACHINE State and set it true for AST2600 EVB
and set "wp_inverted" property true of sdhci-generic model.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241114094839.4128404-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>

hw/arm/aspeed.c

@@ -409,6 +409,12 @@ static void aspeed_machine_init(MachineState *machine)
                              OBJECT(get_system_memory()), &error_abort);
     object_property_set_link(OBJECT(bmc->soc), "dram",
                              OBJECT(machine->ram), &error_abort);
+    if (amc->sdhci_wp_inverted) {
+        for (i = 0; i < bmc->soc->sdhci.num_slots; i++) {
+            object_property_set_bool(OBJECT(&bmc->soc->sdhci.slots[i]),
+                                     "wp-inverted", true, &error_abort);
+        }
+    }
     if (machine->kernel_filename) {
         /*
          * When booting with a -kernel command line there is no u-boot
@@ -1415,6 +1421,7 @@ static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data)
     amc->num_cs    = 1;
     amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON | ASPEED_MAC2_ON |
                      ASPEED_MAC3_ON;
+    amc->sdhci_wp_inverted = true;
     amc->i2c_init  = ast2600_evb_i2c_init;
     mc->default_ram_size = 1 * GiB;
     aspeed_machine_class_init_cpus_defaults(mc);

include/hw/arm/aspeed.h

@@ -39,6 +39,7 @@ struct AspeedMachineClass {
     uint32_t macs_mask;
     void (*i2c_init)(AspeedMachineState *bmc);
     uint32_t uart_default;
+    bool sdhci_wp_inverted;
 };