qapi: Correct spelling of QEMU in doc comments

Improve awkward phrasing in migrate-incoming While there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250527073916.1243024-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qapi/audio.json

@@ -309,9 +309,9 @@
 #
 # @name: name of the sink/source to use
 #
-# @stream-name: name of the PulseAudio stream created by qemu.  Can be
+# @stream-name: name of the PulseAudio stream created by QEMU.  Can be
 #     used to identify the stream in PulseAudio when you create
-#     multiple PulseAudio devices or run multiple qemu instances
+#     multiple PulseAudio devices or run multiple QEMU instances
 #     (default: audiodev's id, since 4.2)
 #
 # @latency: latency you want PulseAudio to achieve in microseconds
@@ -353,9 +353,9 @@
 #
 # @name: name of the sink/source to use
 #
-# @stream-name: name of the PipeWire stream created by qemu.  Can be
+# @stream-name: name of the PipeWire stream created by QEMU.  Can be
 #     used to identify the stream in PipeWire when you create multiple
-#     PipeWire devices or run multiple qemu instances (default:
+#     PipeWire devices or run multiple QEMU instances (default:
 #     audiodev's id)
 #
 # @latency: latency you want PipeWire to achieve in microseconds

qapi/block-core.json

@@ -2030,7 +2030,7 @@
 #
 # @id: Block graph node identifier.  This @id is generated only for
 #     x-debug-query-block-graph and does not relate to any other
-#     identifiers in Qemu.
+#     identifiers in QEMU.
 #
 # @type: Type of graph node.  Can be one of block-backend, block-job
 #     or block-driver-state.
@@ -2794,7 +2794,7 @@
 # The node that receives the data is called the top image, can be
 # located in any part of the chain (but always above the base image;
 # see below) and can be specified using its device or node name.
-# Earlier qemu versions only allowed 'device' to name the top level
+# Earlier QEMU versions only allowed 'device' to name the top level
 # node; presence of the 'base-node' parameter during introspection can
 # be used as a witness of the enhanced semantics of 'device'.
 #
@@ -3196,7 +3196,7 @@
 #
 # Selects the AIO backend to handle I/O requests
 #
-# @threads: Use qemu's thread pool
+# @threads: Use QEMU's thread pool
 #
 # @native: Use native AIO backend (only Linux and Windows)
 #
@@ -5157,10 +5157,10 @@
 ##
 # @BlockdevQcow2Version:
 #
-# @v2: The original QCOW2 format as introduced in qemu 0.10 (version
+# @v2: The original QCOW2 format as introduced in QEMU 0.10 (version
 #     2)
 #
-# @v3: The extended QCOW2 format as introduced in qemu 1.1 (version 3)
+# @v3: The extended QCOW2 format as introduced in QEMU 1.1 (version 3)
 #
 # Since: 2.12
 ##

qapi/block-export.json

@@ -169,7 +169,7 @@
 # @growable: Whether writes beyond the EOF should grow the block node
 #     accordingly.  (default: false)
 #
-# @allow-other: If this is off, only qemu's user is allowed access to
+# @allow-other: If this is off, only QEMU's user is allowed access to
 #     this export.  That cannot be changed even with chmod or chown.
 #     Enabling this option will allow other users access to the export
 #     with the FUSE mount option "allow_other".  Note that using

qapi/char.json

@@ -351,7 +351,7 @@
 # Configuration info for stdio chardevs.
 #
 # @signal: Allow signals (such as SIGINT triggered by ^C) be delivered
-#     to qemu.  Default: true.
+#     to QEMU.  Default: true.
 #
 # Since: 1.5
 ##
@@ -443,7 +443,7 @@
 ##
 # @ChardevQemuVDAgent:
 #
-# Configuration info for qemu vdagent implementation.
+# Configuration info for QEMU vdagent implementation.
 #
 # @mouse: enable/disable mouse, default is enabled.
 #
@@ -656,7 +656,7 @@
 ##
 # @ChardevQemuVDAgentWrapper:
 #
-# @data: Configuration info for qemu vdagent implementation
+# @data: Configuration info for QEMU vdagent implementation
 #
 # Since: 6.1
 ##

qapi/introspect.json

@@ -26,9 +26,9 @@
 # the QAPI schema.
 #
 # Furthermore, while we strive to keep the QMP wire format
-# backwards-compatible across qemu versions, the introspection output
+# backwards-compatible across QEMU versions, the introspection output
 # is not guaranteed to have the same stability.  For example, one
-# version of qemu may list an object member as an optional
+# version of QEMU may list an object member as an optional
 # non-variant, while another lists the same member only through the
 # object's variants; or the type of a member may change from a generic
 # string into a specific enum or from one specific type into an

qapi/migration.json

@@ -415,7 +415,7 @@
 #     on secondary side, this process is called COarse-Grain LOck
 #     Stepping (COLO) for Non-stop Service.  (since 2.8)
 #
-# @release-ram: if enabled, qemu will free the migrated ram pages on
+# @release-ram: if enabled, QEMU will free the migrated ram pages on
 #     the source during postcopy-ram migration.  (since 2.9)
 #
 # @return-path: If enabled, migration will use the return path even
@@ -1500,7 +1500,7 @@
 ##
 # @x-colo-lost-heartbeat:
 #
-# Tell qemu that heartbeat is lost, request it to do takeover
+# Tell QEMU that heartbeat is lost, request it to do takeover
 # procedures.  If this command is sent to the PVM, the Primary side
 # will exit COLO mode.  If sent to the Secondary, the Secondary side
 # will run failover work, then takes over server operation to become
@@ -1729,8 +1729,8 @@
 ##
 # @migrate-incoming:
 #
-# Start an incoming migration, the qemu must have been started with
-# -incoming defer
+# Start an incoming migration.  QEMU must have been started with
+# -incoming defer.
 #
 # @uri: The Uniform Resource Identifier identifying the source or
 #     address to listen on

qapi/run-state.json

@@ -135,19 +135,19 @@
 ##
 # @SHUTDOWN:
 #
-# Emitted when the virtual machine has shut down, indicating that qemu
+# Emitted when the virtual machine has shut down, indicating that QEMU
 # is about to exit.
 #
 # @guest: If true, the shutdown was triggered by a guest request (such
 #     as a guest-initiated ACPI shutdown request or other
 #     hardware-specific action) rather than a host request (such as
-#     sending qemu a SIGINT).  (since 2.10)
+#     sending QEMU a SIGINT).  (since 2.10)
 #
 # @reason: The @ShutdownCause which resulted in the SHUTDOWN.
 #     (since 4.0)
 #
 # .. note:: If the command-line option ``-no-shutdown`` has been
-#    specified, qemu will not exit, and a STOP event will eventually
+#    specified, QEMU will not exit, and a STOP event will eventually
 #    follow the SHUTDOWN event.
 #
 # Since: 0.12

qapi/transaction.json

@@ -223,7 +223,7 @@
 # exists, the request will be rejected.  Only some image formats
 # support it, for example, qcow2, and rbd,
 #
-# On failure, qemu will try delete the newly created internal snapshot
+# On failure, QEMU will try delete the newly created internal snapshot
 # in the transaction.  When an I/O error occurs during deletion, the
 # user needs to fix it later with qemu-img or other command.
 #

qapi/uefi.json

@@ -5,7 +5,7 @@
 ##
 # = UEFI Variable Store
 #
-# The qemu efi variable store implementation (hw/uefi/) uses this to
+# The QEMU efi variable store implementation (hw/uefi/) uses this to
 # store non-volatile variables in json format on disk.
 #
 # This is an existing format already supported by (at least) two other

qapi/ui.json

@@ -1526,12 +1526,12 @@
 #
 # Display (user interface) options.
 #
-# @type: Which DisplayType qemu should use.
+# @type: Which DisplayType QEMU should use.
 #
 # @full-screen: Start user interface in fullscreen mode
 #     (default: off).
 #
-# @window-close: Allow to quit qemu with window close button
+# @window-close: Allow to quit QEMU with window close button
 #     (default: on).
 #
 # @show-cursor: Force showing the mouse cursor (default: off).