this makes the code slightly smaller and eliminates these functions
from relevance to possible future changes to multithreaded fork.
the barrier of a_store isn't technically needed here, but a_store is
used anyway for internal consistency of the memory model.
if the multithreaded parent forked while another thread was calling
sigaction for SIGABRT or calling abort, the child could inherit a lock
state in which future calls to abort will deadlock, or in which the
disposition for SIGABRT has already been reset to SIG_DFL. this is
nonconforming since abort is AS-safe and permitted to be called
concurrently with fork or in the MT-forked child.
the dummy definition of __abort_lock in sigaction.c was performing
exactly the same role that putting the lock in its own source file
could and should have been used to achieve.
while we're moving it, give it a proper declaration.
previously, if a file descriptor had aio operations pending in the
parent before fork, attempting to close it in the child would attempt
to cancel a thread belonging to the parent. this could deadlock, fail,
or crash the whole process of the cancellation signal handler was not
yet installed in the parent. in addition, further use of aio from the
child could malfunction or deadlock.
POSIX specifies that async io operations are not inherited by the
child on fork, so clear the entire aio fd map in the child, and take
the aio map lock (with signals blocked) across the fork so that the
lock is kept in a consistent state.
taking the deprecated/dropped vfork spec strictly, doing pretty much
anything but execve in the child is wrong and undefined. however,
these are commonly needed operations to setup the child state before
exec, and historical implementations tolerated them.
for single-threaded parents, these operations already worked as
expected in the vforked child. however, due to the need for __synccall
to synchronize id/resource limit changes among all threads, calling
these functions in the vforked child of a multithreaded parent caused
a misdirected broadcast signaling of all threads in the parent. these
signals could kill the parent entirely if the synccall signal handler
had never been installed in the parent, or could be ignored if it had,
or could signal/kill one or more utterly wrong processes if the parent
already terminated (due to vfork semantics, only possible via fatal
signal) and the parent tids were recycled. in any case, the expected
number of semaphore posts would never happen, so the child would
permanently hang (with all signals blocked) waiting for them.
to mitigate this, and also make the normal usage case work as
intended, treat the condition where the caller's actual tid does not
match the tid in its thread structure as single-threaded, and bypass
the entire synccall broadcast operation.
commit 0a05eace16 implemented AT_EACCESS
for faccessat with a horrible hack, creating a child process to change
switch uid/gid and perform the access probe without making potentially
irreversible changes to the caller's credentials. this was due to the
syscall lacking a flags argument.
linux 5.8 introduced a new syscall, SYS_faccessat2, fixing this
deficiency. use it if any flags are passed, and fallback to the old
strategy on ENOSYS. continue using the old syscall when there are no
flags.
Ethernet protocol number for media redundancy protocol, see
linux commit 4714d13791f831d253852c8b5d657270becb8b2a
bridge: uapi: mrp: Add mrp attributes.
the linux faccessat syscall lacks a flag argument that is necessary
to implement the posix api, see
linux commit c8ffd8bcdd28296a198f237cc595148a8d4adfbe
vfs: add faccessat2 syscall
add TCP_NLA_BYTES_NOTSENT and new tcp_zerocopy_receive fields, see
linux commit c8856c051454909e5059df4e81c77b9c366c5515
tcp-zerocopy: Return inq along with tcp receive zerocopy.
linux commit 33946518d493cdf10aedb4a483f1aa41948a3dab
tcp-zerocopy: Return sk_err (if set) along with tcp receive zerocopy.
linux commit e08ab0b377a1489760533424437c5f4be7f484a4
tcp: add bytes not sent to SCM_TIMESTAMPING_OPT_STATS
it remaps anon mappings without unmapping the original. chromeos plans
to use it with userfaultfd, see:
linux commit e346b3813067d4b17383f975f197a9aa28a3b077
mm/mremap: add MREMAP_DONTUNMAP to mremap()
see
linux commit 9e2ba2c34f1922ca1e0c7d31b30ace5842c2e7d1
fanotify: send FAN_DIR_MODIFY event flavor with dir inode and name
linux commit 44d705b0370b1d581f46ff23e5d33e8b5ff8ec58
fanotify: report name info for FAN_DIR_MODIFY event
added in
linux commit 1a50ec0b3b2e9a83f1b1245ea37a853aac2f741c
arm64: Implement archrandom.h for ARMv8.5-RNG
linux commit d4209d8b717311d114b5d47ba7f8249fd44e97c2
arm64: cpufeature: Export matrix and other features to userspace
these were missed before, added in
linux commit 1201937491822b61641c1878ebcd16a93aed4540
arm64: Expose ARMv8.5 CondM capability to userspace
linux commit ca9503fc9e9812aa6258e55d44edb03eb30fc46f
arm64: Expose FRINT capabilities to userspace
reuses a bit from CSIGNAL so it can only be used with unshare
and clone3, added in
linux commit 769071ac9f20b6a447410c7eaa55d1a5233ef40c
ns: Introduce Time Namespace
needed for storage drivers with userspace component that may
run in the IO path, see
linux commit 8d19f1c8e1937baf74e1962aae9f90fa3aeab463
prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaim
The use of TCP_ in udp.h is not known, fortunately udp.h is not
specified by posix so there are no strict namespace rules, added in
linux commit e27cca96cd68fa2c6814c90f9a1cfd36bb68c593
xfrm: add espintcp (RFC 8229)
TCP_NLA_TIMEOUT_REHASH queries timeout-triggered rehash attempts,
tcpm_ifindex limits the scope of TCP_MD5SIG* sockopt to a device.
see
linux commit 32efcc06d2a15fa87585614d12d6c2308cc2d3f3
tcp: export count for rehash attempts
linux commit 6b102db50cdde3ba2f78631ed21222edf3a5fb51
net: Add device index to tcp_md5sig
add IPPROTO_ETHERNET and IPPROTO_MPTCP, see
linux commit 2677625387056136e256c743e3285b4fe3da87bb
seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
linux commit faf391c3826cd29feae02078ca2022d2f912f7cc
tcp: Define IPPROTO_MPTCP
also added clone3 on sh and m68k, on sh it's still missing (not
yet wired up), but reserved so safe to add.
see
linux commit fddb5d430ad9fa91b49b1d34d0202ffe2fa0e179
open: introduce openat2(2) syscall
linux commit 9a2cef09c801de54feecd912303ace5c27237f12
arch: wire up pidfd_getfd syscall
linux commit 8649c322f75c96e7ced2fec201e123b2b073bf09
pid: Implement pidfd_getfd syscall
linux commit e8bb2a2a1d51511e6b3f7e08125d52ec73c11139
m68k: Wire up clone3() syscall
the fcntl file locking command macro values in the existing generic
bits/fcntl.h were the "64" variants, requiring 64-bit archs that use
the "plain" variants to have their own bits/fcntl.h, even if they
otherwise use the common definitions for everything.
since commit 7cc79d10af exposed
__LONG_MAX to all bits headers, we can now make the generic one common
between 32- and 64-bit archs.
prior to commit 685e40bb09, x86_64 was
correctly passing O_LARGEFILE to SYS_open; it was removed (defined to
0 in the public header, and changed to use the public definition) as
part of that change, probably out of a mistaken belief that it's not
needed.
however, on a mixed system with 32-bit and 64-bit binaries, it's
important that all files be opened with O_LARGEFILE, even if the
opening process is 64-bit, in case a descriptor is passed to a 32-bit
process. otherwise, attempts to access past 2GB in the 32-bit process
could produce EOVERFLOW.
most 64-bit archs added later got this right alread, except for
mips64. x32 was also affected. there are now fixed.
this code is only needed for pre-2.6 kernels, which are not actually
supported anyway, and was never tested. the fallback path using
SYS_modify_ldt failed to clear the upper bits of %eax (all ones due to
SYS_set_thread_area's return value being an error) before modifying
%al to attempt a new syscall.
prior to commit e68c51ac46, h_errno was
actually an external data object not a macro. bring back the symbol,
and use it as the storage for the main thread's h_errno.
technically this still doesn't provide full compatibility if the
application was multithreaded, but at the time there were no res_*
functions (and they did not set h_errno anyway), so any use of h_errno
would have been via thread-unsafe functions. thus a solution that just
fixes single-threaded applications seems acceptable.
putting the (simple) definition in alltypes.h seems like the best
solution here. making sys/ioctl.h implicitly include termios.h is
probably excess namespace pollution.
now that -Wall is not used and we control which warnings are enabled,
it makes sense to have the wanted ones on by default. hopefully this
will also discourage manually adding -Wall to CFLAGS and making
incorrect changes or bug reports based on the compiler's output.
-Wall varies too much by compiler and version. rather than trying to
track all the unwanted style warnings that need to be subtracted, just
enable wanted warnings.
also, move -Wno-pointer-to-int-cast outside --enable-warnings
conditional so that it always applies, since it's turning off a
nuisance warning that's on-by-default with most compilers.
these four warning options were overlooked previously, likely because
they're not part of GCC's -Wall. they all detect constraint violations
(invalid C at the source level) and should always be on in -Werror
form.
dtv_copy, canary2, and canary_at_end existed solely to match multiple
ABI and asm-accessed layouts simultaneously. now that pthread_arch.h
can be included before struct __pthread is defined, the struct layout
can depend on macros defined by pthread_arch.h.
the adjustment made is entirely a function of TLS_ABOVE_TP and
TP_OFFSET. aside from avoiding repetition of the TP_OFFSET value and
arithmetic, this change makes pthread_arch.h independent of the
definition of struct __pthread from pthread_impl.h. this in turn will
allow inclusion of pthread_arch.h to be moved to the top of
pthread_impl.h so that it can influence the definition of the
structure.
previously, arch files were very inconsistent about the type used for
the thread pointer. this change unifies the new __get_tp interface to
always use uintptr_t, which is the most correct when performing
arithmetic that may involve addresses outside the actual pointed-to
object (due to TP_OFFSET).
while it's not clearly documented anywhere, this is the historical
behavior which some applications expect. applications which need to
see the response packet in these cases, for example to distinguish
between nonexistence in a secure vs insecure zone, must already use
res_mkquery with res_send in order to be portable, since most if not
all other implementations of res_query don't provide it.
the framework to do this always existed but it was deemed unnecessary
because the only [ex-]standard functions using h_errno were not
thread-safe anyway. however, some of the nonstandard res_* functions
are also supposed to set h_errno to indicate the cause of error, and
were unable to do so because it was not thread-safe. this change is a
prerequisite for fixing them.
these have been adopted for future issue of POSIX as the outcome of
Austin Group issue 1151, and are simply functions performing the roles
of the historical ioctls. since struct winsize is being standardized
along with them, its definition is moved to the appropriate header.
there is some chance this will break source files that expect struct
winsize to be defined by sys/ioctl.h without including termios.h. if
this happens, further changes will be needed to have sys/ioctl.h
expose it too.
this is a prerequisite for addition of other interfaces that use
kernel tids, including futex and SIGEV_THREAD_ID.
there is some ambiguity as to whether the semantic return type should
be int or pid_t. either way, futex API imposes a contract that the
values fit in int (excluding some upper reserved bits). glibc used
pid_t, so in the interest of not having gratuitous mismatch (the
underlying types are the same anyway), pid_t is used here as well.
while conceptually this is a syscall, the copy stored in the thread
structure is always valid in all contexts where it's valid to call
libc functions, so it's used to avoid the syscall.
longjmp should set the return value of setjmp, but 64bit
registers were used for the 0 check while the type is int.
use the code that gcc generates for return val ? val : 1;
longjmp 'val' argument is an int, but the assembly is referencing 64-bit
registers as if the argument was a long, or the caller was responsible
for extending the argument. Though the psABI is not clear on this, the
interpretation in GCC is that high bits may be arbitrary and the callee
is responsible for sign/zero-extending the value as needed (likewise for
return values: callers must anticipate that high bits may be garbage).
Therefore testing %rax is a functional bug: setjmp would wrongly return
zero if longjmp was called with val==0, but high bits of %rsi happened
to be non-zero.
Rewrite the prologue to refer to 32-bit registers. In passing, change
'test' to use %rsi, as there's no advantage to using %rax and the new
form is cheaper on processors that do not perform move elimination.
a number of users performing seccomp filtering have requested use of
the new individual syscall numbers for socket syscalls, rather than
the legacy multiplexed socketcall, since the latter has the arguments
all in memory where they can't participate in filter decisions.
previously, some archs used the multiplexed socketcall if it was
historically all that was available, while other archs used the
separate syscalls. the intent was that the latter set only include
archs that have "always" had separate socket syscalls, at least going
back to linux 2.6.0. however, at least powerpc, powerpc64, and sh were
wrongly included in this set, and thus socket operations completely
failed on old kernels for these archs.
with the changes made here, the separate syscalls are always
preferred, but fallback code is compiled for archs that also define
SYS_socketcall. two such archs, mips (plain o32) and microblaze,
define SYS_socketcall despite never having needed it, so it's now
undefined by their versions of syscall_arch.h to prevent inclusion of
useless fallback code.
some archs, where the separate syscalls were only added after the
addition of SYS_accept4, lack SYS_accept. because socket calls are
always made with zeros in the unused argument positions, it suffices
to just use SYS_accept4 to provide a definition of SYS_accept, and
this is done to make happy the macro machinery that concatenates the
socket call name onto __SC_ and SYS_.
same approach as in sqrt.
sqrtl was broken on aarch64, riscv64 and s390x targets because
of missing quad precision support and on m68k-sf because of
missing ld80 sqrtl.
this implementation is written for quad precision and then
edited to make it work for both m68k and x86 style ld80 formats
too, but it is not expected to be optimal for them.
note: using fp instructions for the initial estimate when such
instructions are available (e.g. double prec sqrt or rsqrt) is
avoided because of fenv correctness.
same method as in sqrt, this was tested on all inputs against
an sqrtf instruction. (the only difference found was that x86
sqrtf does not signal the x86 specific input-denormal exception
on negative subnormal inputs while the software sqrtf does,
this is fine as it was designed for ieee754 exceptions only.)
there is known faster method:
"Computing Floating-Point Square Roots via Bivariate Polynomial Evaluation"
that computes sqrtf directly via pipelined polynomial evaluation
which allows more parallelism, but the design does not generalize
easily to higher precisions.
Rich Felker
Szabolcs Nagy
Alexander Monakov