these differ from generic only in using endian-matched padding with a
short __ipc_perm_seq field in place of the int field in generic. this
is not a documented public interface anyway, and the original intent
was to use int here. some ports just inadvertently slipped in the
kernel short+padding form.
previously these differed from generic because they needed their own
definitions of IPC_64. now that it's no longer in public header,
they're identical.
the definition of the IPC_64 macro controls the interface between libc
and the kernel through syscalls; it's not a public API. the meaning is
rather obscure. long ago, Linux's sysvipc *id_ds structures used
16-bit uids/gids and wrong types for a few other fields. this was in
the libc5 era, before glibc. the IPC_64 flag (64 is a misnomer; it's
more like 32) tells the kernel to use the modern[-ish] versions of the
structures.
the definition of IPC_64 has nothing to do with whether the arch is
32- or 64-bit. rather, due to either historical accident or
intentional obnoxiousness, the kernel only accepts and masks off the
0x100 IPC_64 flag conditional on CONFIG_ARCH_WANT_IPC_PARSE_VERSION,
i.e. for archs that want to provide, or that accidentally provided,
both. for archs which don't define this option, no masking is
performed and commands with the 0x100 bit set will fail as invalid. so
ultimately, the definition is just a matter of matching an arbitrary
switch defined per-arch in the kernel.
this layout is more common already than the old generic, and should
become even more common in the future with new archs added and with
64-bit time_t on 32-bit archs.
some of these were not exact duplicates, but had gratuitously
different naming for padding, or omitted the endian checks because the
arch is fixed-endian.
this layout is slightly less common than the old generic one, but only
because x86_64 and x32 wrongly (according to comments in the kernel
headers) copied the i386 padding. for future archs, and with 64-bit
time_t on 32-bit archs, the new layout here will become the most
common, and it makes sense to treat it as the generic.
various padding fields in the generic bits/sem.h were defined in terms
of time_t as a cheap hack standing in for "kernel long", to allow x32
to use the generic version of the file. this was a really bad idea, as
it ended up getting copied into lots of arch-specific versions of the
bits file, and is a blocker to changing time_t to 64-bit on 32-bit
archs.
this commit adds an x32-specific version of the header, and changes
padding type back from time_t to long (currently the same type on all
archs but x32) in the generic header and all the others the hack got
copied into.
this layout is more common already than the old generic, and should
become even more common in the future with new archs added and with
64-bit time_t on 32-bit archs.
the duplicate arch-specific copies are not removed yet in this commit,
so as to assist git tooling in copy/rename tracking.
there are more archs sharing the generic 64-bit version of the struct,
which is uniform and much more reasonable, than sharing the current
"generic" one, and depending on how time64 sysvipc is done for 32-bit
archs, even more may be sharing the "64-bit version" in the future.
so, duplicate the current generic to all archs using it (arm, i386,
m68k, microblaze, or1k) so that the generic can be changed freely.
this is recorded as its own commit mainly as a hint to git tooling, to
assist in copy/move tracking.
the x32 syscall interfaces treat timespec's tv_nsec member as 64-bit
despite the API type being long and long being 32-bit in the ABI. this
is no problem for syscalls that store timespecs to userspace as
results, but caused uninitialized padding to be misinterpreted as the
high bits in syscalls that take timespecs as input.
since the beginning of the port, we've dealt with this situation with
hacks in syscall_arch.h, and injected between __syscall_cp_c and
__syscall_cp_asm, to special-case the syscall numbers that involve
timespecs as inputs and copy them to a form suitable to pass to the
kernel.
commit 40aa18d55a set the stage for
removal of these hacks by letting us treat the "normal" x32 syscalls
dealing with timespec as if they're x32's "time64" syscalls,
effectively making x32 ax "time64-only 32-bit arch" like riscv32 will
be when it's added. since then, all users of syscalls that x32's
syscall_arch.h had hacks for have been updated to use time64 syscalls,
so the hacks can be removed.
there are still at least a few other timespec-related syscalls broken
on x32, which were overlooked when the x32 hacks were done or added
later. these include at least recvmmsg, adjtimex/clock_adjtime, and
timerfd_settime, and they will be fixed independently later on.
x32 is odd in that it's the only ILP32 arch/ABI we have where time_t
is 64-bit rather than (32-bit) long, and this has always been
problematic in that it results in struct timespec having unused
padding space, since tv_nsec has type long, which the kernel insists
be zero- or sign-extended (due to negative tv_nsec being invalid, it
doesn't matter which) to match the x86_64 type.
up til now, we've had really ugly hacks in x32/syscall_arch.h to patch
up the timespecs passed to the kernel. but the same requirement to
zero- or sign-extend tv_nsec also applies to all the new time64
syscalls on true 32-bit archs. so let's take advantage of this to
clean things up.
this patch defines all of the time64 syscalls for x32 as aliases for
the existing syscalls by the same name. this establishes the following
invariants:
- if the time64 form is defined, it takes time arguments as 64-bit
objects, and tv_nsec inputs must be zero-/sign-extended to 64-bit.
- if the time64 form is not defined, or if the time64 form is defined
and is not equal to the "plain" form, the plain form takes time
arguments as longs.
this will avoid the need for protocols for archs to define appropriate
types for each family of syscalls, and for the reader of the code to
have to be aware of such type definitions.
in some sense it might be simpler if the plain syscall form were
undefined for x32, so that it would always take longs if defined.
however, a number of these syscalls are used in contexts with a null
time argument, or (e.g. futex) for commands that don't involve time at
all, and having to introduce time64-specific logic to all those call
points does not make sense. thus, while the "plain" forms are kept now
just because they're needed until the affected code is converted over,
they'll also almost surely be kept in the future as well.
kernel support for x32 was added long after the utimensat syscall was
already available, so having a fallback is just wasted code size.
also, for changes related to time64 support on 32-bit archs, I want to
be able to assume the old futimesat syscall always works with longs,
which is true except for x32. by ensuring that it's not used on x32,
the needed invariant is established.
now that we have a kstat structure decoupled from the public struct
stat, we can just use the broken kernel structures directly and let
the code in fstatat do the translation.
presently, all archs/ABIs have struct stat matching the kernel
stat[64] type, except mips/mipsn32/mips64 which do conversion hacks in
syscall_arch.h to work around bugs in the kernel type. this patch
completely decouples them and adds a translation step to the success
path of fstatat. at present, this is just a gratuitous copying, but it
opens up multiple possibilities for future support for 64-bit time_t
on 32-bit archs and for cleaned-up/unified ABIs.
for clarity, the mips hacks are not yet removed in this commit, so the
mips kstat structs still correspond to the output of the hacks in
their syscall_arch.h files, not the raw kernel type. a subsequent
commit will fix this.
these were overlooked during review. bits headers are not allowed to
pull in additional headers (note: that rule is currently broken in
other places but just for endian.h). string.h has no place here
anyway, and including bits/alltypes.h without defining macros to
request types from it is a nop.
the "A" constraint is simply for an address expression that's a single
register, but it's not yet supported by clang, and has no advantage
here over just using a register operand for the address. the latter is
actually preferable in the a_cas_p case because it avoids aliasing an
lvalue onto the memory.
most egregious problem was the lack of memory clobber and lack of
volatile asm; this made the atomics memory barriers but not compiler
barriers. use of "+r" rather than "=r" for a clobbered temp was also
wrong, since the initial value is indeterminate.
having "+r"(a0) is redundant with "0"(a0) in syscalls with at least 1
arg, which is arguably a constraint violation (clang treats it as
such), and an invalid input with indeterminate value in the 0-arg
case. use the "=r"(a0) form instead.
ever since inline syscalls were added for (o32) mips in commit
328810d325, the asm has nonsensically
loaded the syscall number, rather than taking $2 as an input
constraint to let the compiler load it. commit
cfc09b1ecf improved on this somewhat by
allowing a constant syscall number to propagate into an immediate, but
missed that the whole operation made no sense.
now, only $4, $5, $6, $8, and $9 are potential input-only registers.
$2 is always input and output, and $7 is both when it's an argument,
otherwise output-only. previously, $7 was treated as an input (with a
"1" constraint matching its output position) even when it was not an
input, which was arguably undefined behavior (asm input from
indeterminate value). this is corrected.
this patch is not purely non-functional changes, since before, $8 and
$9 were wrongly in the clobberlist for syscalls with fewer than 5 or 6
arguments. of course it's impossible for syscalls to have different
clobbers depending on their number of arguments. the clobberlist for
the recently-added 5- and 6-argument forms was correct, and for the 0-
to 4-argument forms was erroneously copied from the mips o32 ABI where
the additional arguments had to be passed on the stack.
in making this change, I reviewed the kernel sources, and $8 and $9
are always saved for 64-bit kernels since they're part of the syscall
argument list for n32 and n64 ABIs.
a fully thumb1 build is not supported because some asm files are
incompatible with thumb1, but apparently it works to compile the C
code as thumb1
commit 06fbefd100 caused this regression
but introducing use of the clz instruction, which is not supported in
arm mode prior to v5, and not supported in thumb prior to thumb2
(v6t2). commit 1b9406b03c fixed the
issue only for arm mode pre-v5 but left thumb1 broken.
Commit 3517d74a5e changed the token in
sys/ioctl.h from 0x01 to 1, so bits/termios.h no longer matches. Revert
the bits/termios.h change to keep the headers in sync.
This reverts commit 9eda4dc69c.
this was apparently copied from x86_64; it's not part of the kernel
API for riscv64. this change eliminates the need for a
riscv64-specific bits header and lets it use the generic one.
syscall numbers are now synced up across targets (starting from 403 the
numbers are the same on all targets other than an arch specific offset)
IPC syscalls sem*, shm*, msg* got added where they were missing (except
for semop: only semtimedop got added), the new semctl, shmctl, msgctl
imply IPC_64, see
linux commit 0d6040d4681735dfc47565de288525de405a5c99
arch: add split IPC system calls where needed
new 64bit time_t syscall variants got added on 32bit targets, see
linux commit 48166e6ea47d23984f0b481ca199250e1ce0730a
y2038: add 64-bit time_t syscalls to all 32-bit architectures
new async io syscalls got added, see
linux commit 2b188cc1bb857a9d4701ae59aa7768b5124e262e
Add io_uring IO interface
linux commit edafccee56ff31678a091ddb7219aba9b28bc3cb
io_uring: add support for pre-mapped user IO buffers
a new syscall got added that uses the fd of /proc/<pid> as a stable
handle for processes: allows sending signals without pid reuse issues,
intended to eventually replace rt_sigqueueinfo, kill, tgkill and
rt_tgsigqueueinfo, see
linux commit 3eb39f47934f9d5a3027fe00d906a45fe3a15fad
signal: add pidfd_send_signal() syscall
on some targets (arm, m68k, s390x, sh) some previously missing syscall
numbers got added as well.
Author: Alex Suykov <alex.suykov@gmail.com>
Author: Aric Belsito <lluixhi@gmail.com>
Author: Drew DeVault <sir@cmpwn.com>
Author: Michael Clark <mjc@sifive.com>
Author: Michael Forney <mforney@mforney.org>
Author: Stefan O'Rear <sorear2@gmail.com>
This port has involved the work of many people over several years. I
have tried to ensure that everyone with substantial contributions has
been credited above; if any omissions are found they will be noted
later in an update to the authors/contributors list in the COPYRIGHT
file.
The version committed here comes from the riscv/riscv-musl repo's
commit 3fe7e2c75df78eef42dcdc352a55757729f451e2, with minor changes by
me for issues found during final review:
- a_ll/a_sc atomics are removed (according to the ISA spec, lr/sc
are not safe to use in separate inline asm fragments)
- a_cas[_p] is fixed to be a memory barrier
- the call from the _start assembly into the C part of crt1/ldso is
changed to allow for the possibility that the linker does not place
them nearby each other.
- DTP_OFFSET is defined correctly so that local-dynamic TLS works
- reloc.h LDSO_ARCH logic is simplified and made explicit.
- unused, non-functional crti/n asm files are removed.
- an empty .sdata section is added to crt1 so that the
__global_pointer reference is resolvable.
- indentation style errors in some asm files are fixed.
between v2 and v3 of the powerpc64 port patch, the change was made
from a 32x4 array of 32-bit unsigned ints for vrregs[] to a 32-element
array of __int128. this mismatches the API applications working with
mcontext_t expect from glibc, and seems to have been motivated by a
misinterpretation of a comment on how aarch64 did things as a
suggestion to do the same on powerpc64.
the mistaken layout seems to have been adapted from 32-bit powerpc,
where vscr and vrsave are packed into the same 128-bit slot in a way
that looks like it relies on non-overlapping-ness of the value bits in
big endian.
the powerpc64 port accounted for the fact that the 64-bit ABI puts
each in its own 128-bit slot, but ordered them incorrectly (matching
the bit order used on the 32-bit ABI), and failed to account for vscr
being padded according to endianness so that it can be accessed via
vector moves.
in addition to ABI layout, our definition used different logical
member layout/naming from glibc, where vscr is a structure to
facilitate access as a 32-bit word or a 128-bit vector. the
inconsistency here was unintentional, so fix it.
we have to avoid using ebx unconditionally in asm constraints for
i386, because gcc 3 and 4 and possibly other simplistic compilers
(pcc?) implement PIC via making ebx a fixed-use register, and disallow
its use for anything else. rather than hard-coding knowledge of which
compilers work (at least gcc 5+ and clang), perform a configure test;
this should give us the good codegen on any new compilers we don't yet
know about.
swapping ebx and edx is kept for 1- and 2-arg syscalls because it
avoids having any spills/stack-frame at all in small functions. for
6-arg, if ebx is directly usable, the complex shuffling introduced in
commit c8798ef974 can be avoided, and
ebp can be loaded the same way ebx is in 5-arg syscalls for compilers
that don't support direct use of ebx.
commit 22e5bbd0de inlined the i386
syscall mechanism, but wrongly assumed memory operands to the 5- and
6-argument syscall asm would be esp-based. however, nothing in the
constraints prevented them from being ebx- or ebp-based, and in those
cases, ebx and ebp could be clobbered before use of the memory operand
was complete. in the 6-argument case, this prevented restoration of
the original register values before the end of the asm block, breaking
the asm contract since ebx and ebp are not marked as clobbered. (they
can't be, because lots of compilers don't accept these registers in
constraints or clobbers if PIC or frame pointer is enabled).
doing this right is complicated by the fact that, after a single push,
no operands which might be memory operands are usable. if they are
esp-based, the value of esp has changed, rendering them invalid.
introduce some new dances to load the registers. for the 5-arg case,
push the operand that may be a memory operand first, and after that,
it doesn't matter if the operand is invalid, since we'll just use the
newly pushed value. for the 6-arg case, we need to put both operands
in memory to begin with, like the old non-inline code prior to commit
22e5bbd0de accepted, so that there's
only one potentially memory-based operand to the asm. this can then be
saved with a single push, and after that the values can be read off
into the registers they're needed in.
there's some size overhead, but still a lot less execution overhead
than the old out-of-line code. doing it better depends on a modern
compiler that lets you use ebx and ebp in asm constraints without
restriction. the failure modes on compilers where this doesn't work
are inconsistent and dangerous (on at least some gcc versions 4.x and
earlier, wrong codegen!), so this is a delicate matter. it can be
addressed later if needed.
commit 788d5e24ca exposed the breakage
at build time by removing support for 7-argument syscalls; however,
the external __syscall function provided for mips before did not pass
a 7th argument from the stack, so the behavior was just silently
broken.
this has been wrong since the beginning of the microblaze port: the
syscall ABI for microblaze does not align 64-bit arguments on even
register boundaries. commit 788d5e24ca
exposed the problem by introducing references to a nonexistent
__syscall7. the ABI is not documented well anywhere, but I was able to
confirm against both strace source and glibc source that microblaze is
not using the alignment.
per the syscall(2) man page, posix_fadvise, ftruncate, pread, pwrite,
readahead, sync_file_range, and truncate were all affected and either
did not work at all, or only worked by chance, e.g. when the affected
argument slots were all zero.
analogous to commit efda534b21 for
powerpc. commit 587f5a53bc moved the
definition of SO_PEERSEC to bits/socket.h for archs where the SO_*
macros differ.
C99 has ways to support fenv access, but compilers don't implement it
and assume nearest rounding mode and no fp status flag access. (gcc has
-frounding-math and then it does not assume nearest rounding mode, but
it still assumes the compiled code itself does not change the mode.
Even if the C99 mechanism was implemented it is not ideal: it requires
all code in the library to be compiled with FENV_ACCESS "on" to make it
usable in non-nearest rounding mode, but that limits optimizations more
than necessary.)
The math functions should give reasonable results in all rounding modes
(but the quality may be degraded in non-nearest rounding modes) and the
fp status flag settings should follow the spec, so fenv side-effects are
important and code transformations that break them should be prevented.
Unfortunately compilers don't give any help with this, the best we can
do is to add fp barriers to the code using volatile local variables
(they create a stack frame and undesirable memory accesses to it) or
inline asm (gcc specific, requires target specific fp reg constraints,
often creates unnecessary reg moves and multiple barriers are needed to
express that an operation has side-effects) or extern call (only useful
in tail-call position to avoid stack-frame creation and does not work
with lto).
We assume that in a math function if an operation depends on the input
and the output depends on it, then the operation will be evaluated at
runtime when the function is called, producing all the expected fenv
side-effects (this is not true in case of lto and in case the operation
is evaluated with excess precision that is not rounded away). So fp
barriers are needed (1) to prevent the move of an operation within a
function (in case it may be moved from an unevaluated code path into an
evaluated one or if it may be moved across a fenv access), (2) force the
evaluation of an operation for its side-effect when it has no input
dependency (may be constant folded) or (3) when its output is unused. I
belive that fp_barrier and fp_force_eval can take care of these and they
should not be needed in hot code paths.
n32 and n64 ABIs add new argument registers vs o32, so that passing on
the stack is not necessary, so it's not clear why the 5- and
6-argument versions were special-cased to begin with; it seems to have
been pattern-copying from arch/mips (o32).
i've treated the new argument registers like the first 4 in terms of
clobber status (non-clobbered). hopefully this is correct.
the OABI passes these on the stack, using the convention that their
position on the stack is as if the first four arguments (in registers)
also had stack slots. originally this was deemed too awkward to do
inline, falling back to external __syscall, but it's not that bad and
now that external __syscall is being removed, it's necessary.
the inline syscall code is copied directly from powerpc64. the extent
of register clobber specifiers may be excessive on both; if that turns
out to be the case it can be fixed later.
it was never demonstrated to me that this workaround was needed, and
seems likely that, if there ever was any clang version for which it
was needed, it's old enough to be unusably buggy in other ways. if it
turns out some compilers actually can't do the register allocation
right, we'll need to replace this with inline shuffling code, since
the external __syscall dependency is being removed.
this is the first part of a series of patches intended to make
__syscall fully self-contained in the object file produced using
syscall.h, which will make it possible for crt1 code to perform
syscalls.
the (confusingly named) i386 __vsyscall mechanism, which this commit
removes, was introduced before the presence of a valid thread pointer
was mandatory; back then the thread pointer was setup lazily only if
threads were used. the intent was to be able to perform syscalls using
the kernel's fast entry point in the VDSO, which can use the sysenter
(Intel) or syscall (AMD) instruction instead of int $128, but without
inlining an access to the __syscall global at the point of each
syscall, which would incur a significant size cost from PIC setup
everywhere. the mechanism also shuffled registers/calling convention
around to avoid spills of call-saved registers, and to avoid
allocating ebx or ebp via asm constraints, since there are plenty of
broken-but-supported compiler versions which are incapable of
allocating ebx with -fPIC or ebp with -fno-omit-frame-pointer.
the new mechanism preserves the properties of avoiding spills and
avoiding allocation of ebx/ebp in constraints, but does it inline,
using some fairly simple register shuffling, and uses a field of the
thread structure rather than global data for the vdso-provided syscall
code address.
for now, the external __syscall function is refactored not to use the
old __vsyscall so it can be kept, but the intent is to remove it too.
HWCAP_SB - speculation barrier instruction available added in linux
commit bd4fb6d270bc423a9a4098108784f7f9254c4e6d
HWCAP_PACA, HWCAP_PACG - pointer authentication instructions available
(address and generic) added in linux commit
7503197562567b57ec14feb3a9d5400ebc56812f
Rich Felker
Samuel Holland
Szabolcs Nagy