policy has long been that these definitions are purely a function of
whether long/pointer is 32- or 64-bit, and that they are not allowed
to vary per-arch. move the definition to the shared alltypes.h.in
fragment, using integer constant expressions in terms of sizeof to
vary the array dimensions appropriately. I'm not sure whether this is
more or less ugly than using preprocessor conditionals and two sets of
definitions here, but either way is a lot less ugly than repeating the
same thing for every arch.
LLONG_MAX is uniform for all archs we support and plenty of header and
code level logic assumes it is, so it does not make sense for limits.h
bits mechanism to pretend it's variable.
LONG_BIT can be defined in terms of LONG_MAX; there's no reason to put
it in bits.
by moving LONG_MAX definition to __LONG_MAX in alltypes.h and moving
LLONG_MAX out of bits, there are now no plain-C limits that are
defined in the bits header, so the bits header only needs to be
included in the POSIX or extended profiles. this allows the feature
test macro logic to be removed from the bits header, facilitating a
long-term goal of getting such logic out of bits.
having __LONG_MAX in alltypes.h will allow further generalization of
headers.
archs without a constant PAGESIZE no longer need bits/limits.h at all.
this change is motivated by the intersection of several factors.
presently, despite being a nonstandard header, endian.h is exposing
the unprefixed byte order macros and functions only if _BSD_SOURCE or
_GNU_SOURCE is defined. this is to accommodate use of endian.h from
other headers, including bits headers, which need to define structure
layout in terms of endianness. with time64 switch-over, even more
headers will need to do this.
at the same time, the resolution of Austin Group issue 162 makes
endian.h a standard header for POSIX-future, requiring that it expose
the unprefixed macros and the functions even in standards-conforming
profiles. changes to meet this new requirement would break existing
internal usage of endian.h by causing it to violate namespace where
it's used.
instead, have the arch's alltypes.h define __BYTE_ORDER, either as a
fixed constant or depending on the right arch-specific predefined
macros for determining endianness. explicit literals 1234 and 4321 are
used instead of __LITTLE_ENDIAN and __BIG_ENDIAN so that there's no
danger of getting the wrong result if a macro is undefined and
implicitly evaluates to 0 at the preprocessor level.
the powerpc (32-bit) bits/endian.h being removed had logic for varying
endianness, but our powerpc arch has never supported that and has
always been big-endian-only. this logic is not carried over to the new
__BYTE_ORDER definition in alltypes.h.
now that commit f7f1079796 removed the
legacy i386 conditional definition, va_list is in no way
arch-specific, and has no reason to be in the future. move it to the
shared part of alltypes.h.in
new mount api syscalls were added, same numers on all targets, see
linux commit a07b20004793d8926f78d63eb5980559f7813404
vfs: syscall: Add open_tree(2) to reference or clone a mount
linux commit 2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae
vfs: syscall: Add move_mount(2) to move mounts around
linux commit 24dcb3d90a1f67fe08c68a004af37df059d74005
vfs: syscall: Add fsopen() to prepare for superblock creation
linux commit ecdab150fddb42fe6a739335257949220033b782
vfs: syscall: Add fsconfig() for configuring and managing a context
linux commit 93766fbd2696c2c4453dd8e1070977e9cd4e6b6d
vfs: syscall: Add fsmount() to create a mount for a superblock
linux commit cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb
vfs: syscall: Add fspick() to select a superblock for reconfiguration
linux commit 9c8ad7a2ff0bfe58f019ec0abc1fb965114dde7d
uapi, x86: Fix the syscall numbering of the mount API syscalls [ver #2]
linux commit d8076bdb56af5e5918376cd1573a6b0007fc1a89
uapi: Wire up the mount API syscalls on non-x86 arches [ver #2]
historically, a number of 32-bit archs used long rather than int for
wchar_t, for no good reason. GCC still uses the historical types, but
clang replaced them all with int, and it seems PCC uses int too.
mismatching the compiler's type for wchar_t is not an option due to
wide string literals.
note that the mismatch does not affect C++ ABI since wchar_t is its
own builtin type/keyword in C++, distinct from both int and long, not
a typedef.
i386 already worked around this by honoring __WCHAR_TYPE__ if defined
by the compiler, and only using the official legacy ABI type if not.
add the same to the other affected archs.
it might make sense at some point to switch to using int as the
default if __WCHAR_TYPE__ is not defined, if the expectations is that
new compilers will treat int as the correct choice, but it's unlikely
that the case where __WCHAR_TYPE__ is undefined will ever be used
anyway. I actually wanted to move the definition of wchar_t to the
top-level shared alltypes.h.in, using __WCHAR_TYPE__ and falling back
to int if not defined, but that can't be done without assuming all
compilers define __WCHAR_TYPE__ thanks to some pathological archs
where the ABI has wchar_t as an unsigned type.
otherwise, 32-bit archs that could otherwise share the generic
bits/ipc.h would need to duplicate the struct ipc_perm definition,
obscuring the fact that it's the same. sysvipc is not widely used and
these headers are not commonly included, so there is no performance
gain to be had by limiting the number of indirectly included files
here.
files with the existing time32 definition of IPC_STAT are added to all
current 32-bit archs now, so that when it's changed the change will
show up as a change rather than addition of a new file where it's less
obvious that the value is changing vs the generic one that was used
before.
there are more archs sharing the generic 64-bit version of the struct,
which is uniform and much more reasonable, than sharing the current
"generic" one, and depending on how time64 sysvipc is done for 32-bit
archs, even more may be sharing the "64-bit version" in the future.
so, duplicate the current generic to all archs using it (arm, i386,
m68k, microblaze, or1k) so that the generic can be changed freely.
this is recorded as its own commit mainly as a hint to git tooling, to
assist in copy/move tracking.
syscall numbers are now synced up across targets (starting from 403 the
numbers are the same on all targets other than an arch specific offset)
IPC syscalls sem*, shm*, msg* got added where they were missing (except
for semop: only semtimedop got added), the new semctl, shmctl, msgctl
imply IPC_64, see
linux commit 0d6040d4681735dfc47565de288525de405a5c99
arch: add split IPC system calls where needed
new 64bit time_t syscall variants got added on 32bit targets, see
linux commit 48166e6ea47d23984f0b481ca199250e1ce0730a
y2038: add 64-bit time_t syscalls to all 32-bit architectures
new async io syscalls got added, see
linux commit 2b188cc1bb857a9d4701ae59aa7768b5124e262e
Add io_uring IO interface
linux commit edafccee56ff31678a091ddb7219aba9b28bc3cb
io_uring: add support for pre-mapped user IO buffers
a new syscall got added that uses the fd of /proc/<pid> as a stable
handle for processes: allows sending signals without pid reuse issues,
intended to eventually replace rt_sigqueueinfo, kill, tgkill and
rt_tgsigqueueinfo, see
linux commit 3eb39f47934f9d5a3027fe00d906a45fe3a15fad
signal: add pidfd_send_signal() syscall
on some targets (arm, m68k, s390x, sh) some previously missing syscall
numbers got added as well.
sys/ptrace.h is target specific, use bits/ptrace.h to add target
specific macro definitions.
these macros are kept in the generic sys/ptrace.h even though some
targets don't support them:
PTRACE_GETREGS
PTRACE_SETREGS
PTRACE_GETFPREGS
PTRACE_SETFPREGS
PTRACE_GETFPXREGS
PTRACE_SETFPXREGS
so no macro definition got removed in this patch on any target. only
s390x has a numerically conflicting macro definition (PTRACE_SINGLEBLOCK).
the PT_ aliases follow glibc headers, otherwise the definitions come
from linux uapi headers except ones that are skipped in glibc and
there is no real kernel support (s390x PTRACE_*_AREA) or need special
type definitions (mips PTRACE_*_WATCH_*) or only relevant for linux
2.4 compatibility (PTRACE_OLDSETOPTIONS).
three ABIs are supported: the default with 68881 80-bit fpu format and
results returned in floating point registers, softfloat-only with the
same format, and coldfire fpu with IEEE single/double only. only the
first is tested at all, and only under qemu which has fpu emulation
bugs.
basic functionality smoke tests have been performed for the most
common arch-specific breakage via libc-test and qemu user-level
emulation. some sysvipc failures remain, but are shared with other big
endian archs and will be fixed separately.
Rich Felker
Szabolcs Nagy