* doc/dejagnu.texi: Replace "config file" with "configuration

file" throughout.

ChangeLog

@@ -1,3 +1,8 @@
+2019-01-23  Ben Elliston  <bje@gnu.org>
+
+	* doc/dejagnu.texi: Replace "config file" with "configuration
+	file" throughout.
+
 2019-01-23  Jacob Bachmeyer  <jcb62281@gmail.com>
 
 	* doc/dejagnu.texi (Command line option variables): Improve table

doc/dejagnu.texi

@@ -84,11 +84,11 @@ Running other DejaGnu commands
 
 Customizing DejaGnu
 
-* Global config file::
-* Local config file::
-* Board config file::
+* Global configuration file::
+* Local configuration file::
+* Board configuration file::
 * Remote host testing::
-* Config file values::
+* Configuration file values::
 
 Extending DejaGnu
 
@@ -436,7 +436,7 @@ there is existing support in the @file{Makefile} of the tool being
 tested. This usually consists of a @emph{check} target. The other way is
 to execute the @code{runtest} program directly. To run @code{runtest}
 directly from the command line requires either all of the correct
-command line options, or a @ref{Local config file} must be set up
+command line options, or a @ref{Local configuration file} must be set up
 correctly.
 
 @menu
@@ -1201,15 +1201,15 @@ of any @file{site.exp}, or by setting variables on the @code{runtest}
 command line.
 
 @menu
-* Local config file::
-* Global config file::
-* Board config file::
+* Local configuration file::
+* Global configuration file::
+* Board configuration file::
 * Remote host testing::
-* Config file values::
+* Configuration file values::
 @end menu
 
-@node Global config file, Local config file, , Customizing DejaGnu
-@section Global config file
+@node Global configuration file, Local configuration file, , Customizing DejaGnu
+@section Global configuration file
 @cindex configuration file, global
 
 The global configuration file is where all the target specific
@@ -1269,8 +1269,8 @@ initial comma so that the set of combinations includes no options at
 all. Needless to say, this last target example is mostly specific to
 compiler testing.
 
-@node Local config file, Board config file, Global config file, Customizing DejaGnu
-@section Local config file
+@node Local configuration file, Board configuration file, Global configuration file, Customizing DejaGnu
+@section Local configuration file
 @cindex configuration file, local
 
 It is usually more convenient to keep these @emph{manual overrides} in
@@ -1311,16 +1311,16 @@ to override any defaults.
 
 You can make any changes under this line. If you wish to redefine a
 variable in the top section, then just put a duplicate value in this
-second section. Usually the values defined in this config file are
-related to the configuration of the test run. This is the ideal place to
-set the variables @code{host_triplet}, @code{build_triplet},
+second section. Usually the values defined in this configuration file
+are related to the configuration of the test run. This is the ideal
+place to set the variables @code{host_triplet}, @code{build_triplet},
 @code{target_triplet}. All other variables are tool dependent, i.e., for
 testing a compiler, the value for @code{CC} might be set to a freshly
 built binary, as opposed to one in the user's path.
 
 Here's an example local site.exp file, as used for GCC/G++ testing.
 
-@strong{Local Config File}
+@strong{Local Configuration File}
 
 @example
 ## these variables are automatically generated by make ##
@@ -1339,12 +1339,12 @@ set srcdir "$@{srcdir@}/testsuite"
 ## All variables above are generated by configure. Do Not Edit ##
 @end example
 
-This file defines the required fields for a local config file, namely
-the three system triplets, and the srcdir. It also defines several other
-Tcl variables that are used exclusively by the GCC testsuite. For most
-test cases, the CXXFLAGS and LDFLAGS are supplied by DejaGnu itself for
-cross testing, but to test a compiler, GCC needs to manipulate these
-itself.
+This file defines the required fields for a local configuration file,
+namely the three system triplets, and the srcdir. It also defines
+several other Tcl variables that are used exclusively by the GCC
+testsuite. For most test cases, the CXXFLAGS and LDFLAGS are supplied by
+DejaGnu itself for cross testing, but to test a compiler, GCC needs to
+manipulate these itself.
 
 @vindex test_timeout
 The local @file{site.exp} may also set Tcl variables such as
@@ -1352,7 +1352,7 @@ The local @file{site.exp} may also set Tcl variables such as
 wait for a remote test to complete. If not specified,
 @code{test_timeout} defaults to 300 seconds.
 
-@node Board config file, Remote host testing, Local config file, Customizing DejaGnu
+@node Board configuration file, Remote host testing, Local configuration file, Customizing DejaGnu
 @section Board configuration file
 @cindex configuration file, board
 
@@ -1436,7 +1436,7 @@ library for embedded systems comprising of non-GPL'd code
 
 @end itemize
 
-@node Remote host testing, Config file values, Board config file, Customizing DejaGnu
+@node Remote host testing, Configuration file values, Board configuration file, Customizing DejaGnu
 @section Remote host testing
 @cindex testing on remote hosts
 
@@ -1545,8 +1545,8 @@ Note: if you are testing a cross-compiler, put in the correct target
 board. You'll also have to download more .exp files and modify them for
 your local configuration. The -v's are optional.
 
-@node Config file values, , Remote host testing, Customizing DejaGnu
-@section Config file values
+@node Configuration file values, , Remote host testing, Customizing DejaGnu
+@section Configuration file values
 @cindex configuration values
 
 @vindex target_info
@@ -1561,7 +1561,7 @@ part of the array.
 * User configuration file::
 @end menu
 
-@node Command line option variables, User configuration file, , Config file values
+@node Command line option variables, User configuration file, , Configuration file values
 @subsection Command line option variables
 
 In the user editable second section of the @ref{User configuration
@@ -1641,7 +1641,7 @@ Option@tab Tcl variable@tab Description
 
 @end multitable
 
-@node User configuration file, , Command line option variables, Config file values
+@node User configuration file, , Command line option variables, Configuration file values
 @subsection Per-user configuration file (.dejagnurc)
 
 The per-user configuration file is named @file{.dejagnurc} in the user's
@@ -1738,9 +1738,9 @@ target.
 
 You also need to include two targets important to DejaGnu: @emph{check},
 to run the tests, and @emph{site.exp}, to set up the Tcl copies of
-configuration-dependent values. This is called the @ref{Local config
-file} The @emph{check} target must invoke the @code{runtest} program to
-run the tests.
+configuration-dependent values. This is called the @ref{Local
+configuration file} The @emph{check} target must invoke the
+@code{runtest} program to run the tests.
 
 The @emph{site.exp} target should usually set up (among other things)
 the @emph{$tool} variable for the name of your program. If the local
@@ -1921,8 +1921,8 @@ install DejaGnu. You can test it by:
 There is a crude inheritance scheme going on with board files, so you
 can include one board file into another, The two main procedures used to
 do this are @code{load_generic_config} and
-@code{load_base_board_description}. The generic config file contains
-other procedures used for a certain class of target. The board
+@code{load_base_board_description}. The generic configuration file
+contains other procedures used for a certain class of target. The board
 description file is where the board specific settings go. Commonly there
 are similar target environments with just different processors.