binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Alan Modra	5c1ad6b5bb	ChangeLog rotation	9 years ago
Dimitar Dimitrov	889294f6ff	PRU BFD support include/ * elf/common.h: Add PRU ELF. * elf/pru.h: New file. * opcode/pru.h: New file. * dis-asm.h (print_insn_pru): Declare. bfd/ * archures.c: Add bfd_arch_pru. * Makefile.am: Add PRU target. * config.bfd: Ditto. * configure.ac: Ditto. * elf-bfd.h (enum elf_target_id): Add PRU_ELF_DATA. * targets.c: Add pru_elf32_vec. * reloc.c: Add PRU relocations. * cpu-pru.c: New file. * elf32-pru.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. * bfd-in2.h: Regenerate * libbfd.h: Regenerate. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>	9 years ago
Maciej W. Rozycki	5284e471d5	MIPS16: Add ASMACRO instruction support Add ASMACRO instruction support as per the MIPS16e ASE architecture specifications [1][2], completing MIPS16e instruction set support. [1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65 [2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66 include/ * opcode/mips.h: Document `0', `1', `2', `3', `4' and `s' operand codes. opcodes/ * mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3', `4' and `s' operand codes. (mips16_opcodes): Add "asmacro" entry. binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: Update for ASMACRO support. gas/ * testsuite/gas/mips/mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-asmacro.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests.	9 years ago
Maciej W. Rozycki	d8722d7641	MIPS16: Reassign `0' and `4' operand codes Replace `0' and `4' operand codes with `.' and `F' respectively to free up the `0'-`4' consecutive range. No functional change. gas/ * config/tc-mips.c (mips16_macro_build): Replace `0' and `4' operand codes with `.' and `F' respectively. (mips16_macro): Likewise. include/ * opcode/mips.h: Replace `0' and `4' operand codes with `.' and `F' respectively. opcodes/ * mips16-opc.c (decode_mips16_operand): Replace `0' and `4' operand codes with `.' and `F' respectively. (mips16_opcodes): Likewise.	9 years ago
Maciej W. Rozycki	0674ee5dad	MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.	9 years ago
Alan Modra	4e25adb395	Remove high bit set characters gas/ * doc/c-lm32.texi: Fix chars with high bit set. * testsuite/gas/bfin/vector2.s: Likewise. gold/ * arm.cc: Fix comment chars with high bit set. include/ * coff/pe.h: Fix comment chars with high bit set. * opcode/xgate.h: Likewise. ld/ * testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.	9 years ago
Maciej W. Rozycki	7fd5392005	MIPS16: Switch to 32-bit opcode table interpretation Switch to 32-bit MIPS16 opcode table entry interpretation, similar to how the microMIPS opcode table is handled, for both the `match' and `mask' fields, removing special casing for JAL and JALX instructions and their `a' and `i' operand codes throughout, while retaining automatic processing of extendable opcodes in assembly and disassembly. In assembly disallow size enforcement suffixes as appropriate: `.t' for both 32-bit instructions and macros and `.e' for macros only, making macro handling consistent with the microMIPS instruction set. In disassembly fully decode EXTEND prefixes prepended to unsupported instruction encodings (according to the ISA selection) rather than dumping them as hexadecimal data along with the following instruction, removing all special casing for the EXTEND prefix and making its handling rely on its opcode table entry, except where it is considered a part of an extendable instruction. include/ * opcode/mips.h (mips_opcode_32bit_p): New inline function. gas/ * config/tc-mips.c (micromips_insn_length): Use `mips_opcode_32bit_p'. (is_size_valid): Adjust description. (is_size_valid_16): New function. (validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16 operand decoding. (validate_mips16_insn): Remove `a' and `i' operand code special casing, use `mips_opcode_32bit_p' to determine instruction width. (append_insn): Adjust forced MIPS16 instruction size determination. (match_mips16_insn): Likewise. Don't shift the instruction's opcode with the `a' and `i' operand codes. Use `mips_opcode_32bit_p' in operand decoding. (match_mips16_insns): Check for forced instruction size's validity. (mips16_ip): Don't force instruction size in the `noautoextend' mode. * testsuite/gas/mips/mips16-jal-e.d: New test. * testsuite/gas/mips/mips16-jal-t.d: New test. * testsuite/gas/mips/mips16-macro-e.d: New test. * testsuite/gas/mips/mips16-macro-t.d: New test. * testsuite/gas/mips/mips16-jal-t.l: New stderr output. * testsuite/gas/mips/mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips16-jal-e.s: New test source. * testsuite/gas/mips/mips16-jal-t.s: New test source. * testsuite/gas/mips/mips16-macro-e.s: New test source. * testsuite/gas/mips/mips16-macro-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_mips16_insn_arg): Always handle `extend' and `insn' together, with `extend' as the high-order 16 bits. (match_kind): New enum. (print_insn_mips16): Rework for 32-bit instruction matching. Do not dump EXTEND prefixes here. * mips16-opc.c (mips16_opcodes): Move "extend" entry to the end. Recode `match' and `mask' fields as 32-bit in absolute "jal" and "jalx" entries. binutils/ * testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust test for separate EXTEND prefix disassembly.	9 years ago
Andrew Waterman	2922d21da1	Re-work RISC-V gas flags: now we just support -mabi and -march We've decided to standardize on two flags for RISC-V: "-march" sets the target architecture (which determines which instructions can be generated), and "-mabi" sets the target ABI. We needed to rework this because the old flag set didn't support soft-float or single-float ABIs, and didn't support an x32-style ABI on RISC-V. Additionally, we've changed the behavior of the -march flag: it's now a lot stricter and only parses things we can actually understand. Additionally, it's now lowercase-only: the rationale is that while the RISC-V ISA manual specifies that ISA strings are case-insensitive, in Linux-land things are usually case-sensitive. Since this flag can be used to determine library paths, we didn't want to bake some case-insensitivity in there that would case trouble later. This patch implements these two new flags and removes the old flags that could conflict with these. There wasn't a RISC-V release before, so we want to just support a clean flag set. include/ * elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define. (EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define. (EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define. (EF_RISCV_FLOAT_ABI_QUAD): Define. bfd/ * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT. binutils/ * readelf.c (get_machine_flags): Use EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of EF_RISCV_{SOFT,HARD}_FLOAT. gas/ * config/tc-riscv.h (xlen): Delete. * config/tc-riscv.c (xlen): Make static. (abi_xlen): New variable. (options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC} with OPTION_MABI. (md_longopts): Likewise. (md_parse_option): Likewise. (riscv_elf_final_processing): Likewise. * doc/as.texinfo (Target RISC-V options): Likewise. * doc/c-riscv.texi (OPTIONS): Likewise. * config/tc-riscv.c (float_mode): Removed. (float_abi): New type, specifies the floating-point ABI. (riscv_set_abi): New function. (riscv_add_subset): Only allow lower-case ISA names and require them to start with "rv". (riscv_after_parse_args): Likewise. opcodes/ * riscv-dis.c (riscv_disassemble_insn): Default to the ELF's XLEN when none is provided.	9 years ago
Andrew Waterman	45f764234a	Rework RISC-V relocations Before this commit we didn't cleanly support CFI directives because the internal offsets used to get relaxed which broke them. This patch significantly reworks how we handle linker relaxations: * DWARF is now properly supported * There is a ".option norelax" to disable relaxations, for when users write assembly that can't be relaxed (if it's to be later patched up, for example). * There is an additional _RELAX relocation that specifies when previous relocations can be relaxed. We're in the process of documenting the RISC-V ELF ABI, which will include documentation of our relocations https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md but we expect that this relocation set will remain ABI compatible in the future (ie, it's safe to release). Thanks to Kuan-Lin Chen for figuring out how to correctly relax the debug info! include/ * elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32. bfd/ * reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation. (BFD_RELOC_RISCV_TPREL_S): Likewise. (BFD_RELOC_RISCV_RELAX): Likewise. (BFD_RELOC_RISCV_CFA): Likewise. (BFD_RELOC_RISCV_SUB6): Likewise. (BFD_RELOC_RISCV_SET8): Likewise. (BFD_RELOC_RISCV_SET8): Likewise. (BFD_RELOC_RISCV_SET16): Likewise. (BFD_RELOC_RISCV_SET32): Likewise. * elfnn-riscv.c (perform_relocation): Handle the new relocations. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_section): Likewise. (howto_table): Likewise. (riscv_reloc_map): Likewise. (relax_func_t): New type. (_bfd_riscv_relax_call): Add reserve_size argument, which controls the maximal offset pessimism. Correct type of max_alignment. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_section): Compute the required reserve size when relocating and use it to when calling relax_func. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. gas/ * config/tc-riscv.c (riscv_set_options): Add relax. (riscv_opts): Likewise. (s_riscv_option): Add relax and norelax. (riscv_apply_const_reloc): New function. (append_insn): Move constant relocation handling to riscv_apply_const_reloc. (md_pcrel_from): Likewise. (parse_relocation): Skip BFD_RELOC_UNUSED. (md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6, BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA. (md_apply_fix): Likewise. (riscv_pre_output_hook): New function. * config/tc-riscv.h (md_pre_output_hook): Define. (riscv_pre_output_hook): Declare. (DWARF_CIE_DATA_ALIGNMENT): Always -4.	9 years ago
fincs	221855059a	Implement and document --gc-keep-exported include/ * bfdlink.h (struct bfd_link_info): Add gc_keep_exported. bfd/ * elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Add handling for info->gc_keep_exported. (bfd_elf_gc_sections): Likewise. ld/ * ld.texinfo: Document --gc-keep-exported. * ldlex.h (enum option_values): Add OPTION_GC_KEEP_EXPORTED. * lexsup.c (parse_args): Add handling for --gc-keep-exported.	9 years ago
Maciej W. Rozycki	5e7fc731f8	MIPS/opcodes: Also set disassembler's ASE flags from ELF structures Respect any ASE flags recorded in ELF file structures for the purpose of selecting instructions to be disassembled, preventing code from being hex-dumped even though having been clearly indicated as valid at the assembly time. Use date from the MIPS ABI flags structure if present, and otherwise there may be an MDMX ASE flag set in the ELF file header. For backwards compatibility only set extra flags and do not clear any, preserving all previously set by the architecture selected to be disassembled for. include/ * elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct typedef as `elf_internal_abiflags_v0'. bfd/ * bfd-in.h (elf_internal_abiflags_v0): New struct declaration. (bfd_mips_elf_get_abiflags): New prototype. * elfxx-mips.c (bfd_mips_elf_get_abiflags): New function. * bfd-in2.h: Regenerate. opcodes/ * mips-dis.c (mips_convert_abiflags_ases): New function. (set_default_mips_dis_options): Also infer ASE flags from ELF file structures. binutils/ * testsuite/binutils-all/mips/mips-ase-1.d: New test. * testsuite/binutils-all/mips/mips-ase-2.d: New test. * testsuite/binutils-all/mips/mips-ase-3.d: New test. * testsuite/binutils-all/mips/mips-ase-1.s: New test source. * testsuite/binutils-all/mips/mips-ase-2.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.	9 years ago
Renlin Li	a6a5175474	[Binutils][AARCH64]Remove Cn register for coprocessor CRn, CRm field The internal CN register representation for coprocessor fields used in aarch64 sys, sysl instructions are removed in this patch. After the change, those fields are represented as immediate. Related checks are added as well. opcodes/ * aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range qualifier. (operand_general_constraint_met_p): Remove case for CP_REG. (aarch64_print_operand): Print CRn, CRm operand using imm field. * aarch64-tbl.h (QL_SYS): Use CR qualifier. (QL_SYSL): Likewise. (aarch64_opcode_table): Change CRn, CRm operand class and type. * aarch64-opc-2.c : Regenerate. * aarch64-asm-2.c : Likewise. * aarch64-dis-2.c : Likewise. include/ * opcode/aarch64.h (aarch64_operand_class): Remove AARCH64_OPND_CLASS_CP_REG. (enum aarch64_opnd): Change AARCH64_OPND_Cn to AARCH64_OPND_CRn, AARCH64_OPND_Cm to AARCH64_OPND_CRm. (aarch64_opnd_qualifier): Define AARCH64_OPND_QLF_CR qualifier. gas/ * config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register. (get_reg_expected_msg): Remove CN register case. (parse_operands): rewrite parser for CRn, CRm operand. (reg_names): Remove CN register. * testsuite/gas/aarch64/diagnostic.s: Add a new test case. * testsuite/gas/aarch64/diagnostic.l: Adjust error message.	9 years ago
Maciej W. Rozycki	64c1118340	MIPS16: Remove unused `>' operand code This code has never been used throughout the repository history, and likely not before either, as due to the assymetry of MIPS16 instruction set encoding there are no 32-bit shift operations having their immediate shift count placed in the position of the usual `rx' instruction field. gas/ * config/tc-mips.c (mips16_macro_build) <'>'>: Remove case. include/ * opcode/mips.h: Remove references to `>' operand code. opcodes/ * mips16-opc.c (decode_mips16_operand) <'>'>: Remove cases.	9 years ago
Maciej W. Rozycki	4b0781150f	MIPS/include: opcode/mips.h: Correct INSN_CHIP_MASK Complement commit `e407c74b5b` ("Support for MIPS R5900 (Sony Playstation 2)"), <https://sourceware.org/ml/binutils/2012-12/msg00240.html>, and commit `2c62985659` ("MIPS: Add Octeon 3 support") and update the chip mask accordingly. include/ * opcode/mips.h (INSN_CHIP_MASK): Update according to bit use.	9 years ago
Maciej W. Rozycki	b8760d2cb5	MIPS/include: opcode/mips.h: Add a comment for ASE_DSPR3 Complement commit `8f4f9071ad` ("Add MIPS32 DSPr3 support."). include/ * opcode/mips.h (ASE_DSPR3): Add a comment.	9 years ago
Szabolcs Nagy	a12fd8e1b1	[ARM] Add ARMv8.3 command line option and feature flag ARMv8.3 is an architectural extension of ARMv8. Add the feature macro and -march=armv8.3-a gas command line option for the ARM target. https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions gas/ * config/tc-arm.c (arm_archs): Add "armv8.3-a". * doc/c-arm.texi (-march): Add "armv8.3-a". include/ * opcode/arm.h (ARM_EXT2_V8_3A, ARM_AEXT2_V8_3A): New. (ARM_ARCH_V8_3A): New.	9 years ago
Claudiu Zissulescu	abe7c33b45	[ARC] Add checking for LP_COUNT reg usage, improve error reporting. gas/ 2016-11-29 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (find_opcode_match): New function argument errmsg. (assemble_tokens): Collect and report the eventual error message found during opcode matching process. * testsuite/gas/arc/lpcount-err.s: New file. * testsuite/gas/arc/add_s-err.s: Update error message. opcode/ 2016-11-29 Claudiu Zissulescu <claziss@synopsys.com> * arc-opc.c (insert_ra_chk): New function. (insert_rb_chk): Likewise. (insert_rad): Update text error message. (insert_rcd): Likewise. (insert_rhv2): Likewise. (insert_r0): Likewise. (insert_r1): Likewise. (insert_r2): Likewise. (insert_r3): Likewise. (insert_sp): Likewise. (insert_gp): Likewise. (insert_pcl): Likewise. (insert_blink): Likewise. (insert_ilink1): Likewise. (insert_ilink2): Likewise. (insert_ras): Likewise. (insert_rbs): Likewise. (insert_rcs): Likewise. (insert_simm3s): Likewise. (insert_rrange): Likewise. (insert_fpel): Likewise. (insert_blinkel): Likewise. (insert_pcel): Likewise. (insert_nps_3bit_dst): Likewise. (insert_nps_3bit_dst_short): Likewise. (insert_nps_3bit_src2_short): Likewise. (insert_nps_bitop_size_2b): Likewise. (MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Likewise. (RA_CHK): Define. (RB): Adjust. (RB_CHK): Define. (RC): Adjust. * arc-dis.c (print_insn_arc): Add LOAD and STORE class. * arc-tbl.h (div, divu): All instructions are DIVREM class. Change first insn argument to check for LP_COUNT usage. (rem): Likewise. (ld, ldd): All instructions are LOAD class. Change first insn argument to check for LP_COUNT usage. (st, std): All instructions are STORE class. (mac, mpy, dmac, mul, dmpy): All instructions are MPY class. Change first insn argument to check for LP_COUNT usage. (mov): All instructions are MOVE class. Change first insn argument to check for LP_COUNT usage. include/ 2016-11-29 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (insn_class_t): Add DIVREM, LOAD, MOVE, MPY, STORE instruction classes.	10 years ago
Jose E. Marchesi	6884417a0f	gas,opcodes: fix hardware capabilities bumping in the sparc assembler. When the assembler finds an instruction which is part of a higher opcode architecture it bumps the current opcode architecture. For example: $ echo "mwait" \| as -bump {standard input}: Assembler messages: {standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait" However, when two instructions pertaining to the same opcode architecture but associated to different SPARC hardware capabilities are found in the input stream, and no GAS architecture is specified in the command line, the assembler bangs: $ echo "mwait; wr %g0,%g1,%mcdper" \| as -bump {standard input}: Assembler messages: {standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait" {standard input}:1: Error: Hardware capability "sparc5" not enabled for "wr". ... and it should'nt, as WRMCDPER pertains to the same architecture level than MWAIT. This patch fixes this by extending the definition of sparc opcode architectures to contain a set of hardware capabilities and making the assembler to take these capabilities into account when updating the set of allowed hwcaps when an architecture bump is triggered by some instruction. This way, hwcaps associated to architecture levels are maintained in opcodes, while the assembler keeps the flexibiity of defining GAS architectures including additional hwcaps (like -Asparcfmaf or the v8plus* variants). A test covering this failure case is included. gas/ChangeLog: 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c: Move HWS_* and HWS2_* definitions to opcodes/sparc-opc.c. (sparc_arch): Clarify the new role of the hwcap_allowed and hwcap2_allowed fields. (sparc_arch_table): Remove HWS_* and HWS2_* instances from hwcap_allowed and hwcap2_allowed respectively. (md_parse_option): Include the opcode arch hwcaps when processing -A. (sparc_ip): Use the current opcode arch hwcaps to update hwcap_allowed, as well of the hwcaps of the instruction triggering the bump. * testsuite/gas/sparc/hwcaps-bump.s: New file. * testsuite/gas/sparc/hwcaps-bump.l: Likewise. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in hwcaps-bump. include/ChangeLog: 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> * opcode/sparc.h (sparc_opcode_arch): New fields hwcaps and hwcaps2. opcodes/ChangeLog: 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (HWS_V8): Definition moved from gas/config/tc-sparc.c. (HWS_V9): Likewise. (HWS_VA): Likewise. (HWS_VB): Likewise. (HWS_VC): Likewise. (HWS_VD): Likewise. (HWS_VE): Likewise. (HWS_VV): Likewise. (HWS_VM): Likewise. (HWS2_VM): Likewise. (sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of existing entries.	10 years ago
Alan Modra	08dc996fed	PR20744, Incorrect PowerPC VLE relocs VLE 16A and 16D relocs were functionally swapped. PR 20744 include/ * opcode/ppc.h: Define VLE insns using 16A and 16D relocs. bfd/ * elf32-ppc.h (struct ppc_elf_params): Add vle_reloc_fixup field. * elf32-ppc.c: Include opcode/ppc.h. (ppc_elf_howto_raw): Correct dst_mask for R_PPC_VLE_LO16A, R_PPC_VLE_LO16D, R_PPC_VLE_HI16A, R_PPC_VLE_HI16D, R_PPC_VLE_HA16A, R_PPC_VLE_HA16D, R_PPC_VLE_SDAREL_LO16A, R_PPC_VLE_SDAREL_LO16D, R_PPC_VLE_SDAREL_HI16A, R_PPC_VLE_SDAREL_HI16D, R_PPC_VLE_SDAREL_HA16A, and R_PPC_VLE_SDAREL_HA16D relocs. (ppc_elf_link_hash_table_create): Update default_params init. (ppc_elf_vle_split16): Correct shift and mask. Add params. Report or fix insn/reloc mismatches. (ppc_elf_relocate_section): Pass input_section, offset and fixup to ppc_elf_vle_split16. binutils/ * NEWS: Mention PowerPC VLE relocation error. gas/ * config/tc-ppc.c: Delete VLE insn defines. (md_assemble): Swap use_a_reloc and use_d_reloc. * testsuite/gas/ppc/vle-reloc.d: Update. ld/ * emultempl/ppc32elf.em (params): Update initializer. Handle --vle-reloc-fixup command line arg.	10 years ago
David Tolnay	535aade664	libiberty: Add Rust symbol demangling. Adds Rust symbol demangler. Rust mangles symbols using GNU_V3 style, adding a hash and various special character subtitutions. This adds a new rust style to cplus_demangle and adds 3 helper functions rust_demangle, rust_demangle_sym and rust_is_mangled. rust-demangle.c was written by David. Mark did the code formatting to GNU style and integration into the gcc/libiberty build system and testsuite. include/ChangeLog: 2016-11-03 David Tolnay <dtolnay@gmail.com> Mark Wielaard <mark@klomp.org> * demangle.h (DMGL_RUST): New macro. (DMGL_STYLE_MASK): Add DMGL_RUST. (demangling_styles): Add dlang_rust. (RUST_DEMANGLING_STYLE_STRING): New macro. (RUST_DEMANGLING): New macro. (rust_demangle): New prototype. (rust_is_mangled): Likewise. (rust_demangle_sym): Likewise. libiberty/ChangeLog: 2016-11-03 David Tolnay <dtolnay@gmail.com> Mark Wielaard <mark@klomp.org> * Makefile.in (CFILES): Add rust-demangle.c. (REQUIRED_OFILES): Add rust-demangle.o. * cplus-dem.c (libiberty_demanglers): Add rust_demangling case. (cplus_demangle): Handle RUST_DEMANGLING. (rust_demangle): New function. * rust-demangle.c: New file. * testsuite/Makefile.in (really-check): Add check-rust-demangle. (check-rust-demangle): New rule. * testsuite/rust-demangle-expected: New file.	10 years ago
Jason Merrill	a4ddf8dc72	Implement P0012R1, Make exception specifications part of the type system. libiberty/ * cp-demangle.c (is_fnqual_component_type): New. (d_encoding, d_print_comp_inner, d_print_mod_list): Use it. (FNQUAL_COMPONENT_CASE): New. (d_make_comp, has_return_type, d_print_comp_inner) (d_print_function_type): Use it. (next_is_type_qual): New. (d_cv_qualifiers, d_print_mod): Handle noexcept and throw-spec. include/ * demangle.h (enum demangle_component_type): Add DEMANGLE_COMPONENT_NOEXCEPT, DEMANGLE_COMPONENT_THROW_SPEC.	10 years ago
Szabolcs Nagy	c2c4ff8d52	[AArch64] Add ARMv8.3 FCMLA and FCADD instructions Add support for FCMLA and FCADD complex arithmetic SIMD instructions. FCMLA has an indexed element variant where the index range has to be treated specially because a complex number takes two elements and the indexed vector size depends on the other operands. These complex number SIMD instructions are part of ARMv8.3 https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_IMM_ROT1, AARCH64_OPND_IMM_ROT2, AARCH64_OPND_IMM_ROT3. (enum aarch64_op): Add OP_FCMLA_ELEM. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define. (aarch64_feature_simd_v8_3, SIMD_V8_3): Define. (aarch64_opcode_table): Add fcmla and fcadd. (AARCH64_OPERANDS): Add IMM_ROT{1,2,3}. * aarch64-asm.h (aarch64_ins_imm_rotate): Declare. * aarch64-asm.c (aarch64_ins_imm_rotate): Define. * aarch64-dis.h (aarch64_ext_imm_rotate): Declare. * aarch64-dis.c (aarch64_ext_imm_rotate): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}. * aarch64-opc.c (fields): Add FLD_rotate{1,2,3}. (operand_general_constraint_met_p): Rotate and index range check. (aarch64_print_operand): Handle rotate operand. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT. testsuite/gas/aarch64/advsimd-armv8_3.d: New. * testsuite/gas/aarch64/advsimd-armv8_3.s: New. * testsuite/gas/aarch64/illegal-fcmla.s: New. * testsuite/gas/aarch64/illegal-fcmla.l: New. * testsuite/gas/aarch64/illegal-fcmla.d: New.	10 years ago
Szabolcs Nagy	3f06e55061	[AArch64] Add ARMv8.3 combined pointer authentication load instructions Add support for ARMv8.3 LDRAA and LDRAB combined pointer authentication and load instructions. These instructions authenticate the base register and load 8 byte from it plus a scaled 10-bit offset with optional writeback to update the base register. A new instruction class (ldst_imm10) and operand type (AARCH64_OPND_ADDR_SIMM10) were introduced to handle the special addressing form. include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM10. (enum aarch64_insn_class): Add ldst_imm10. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_X1NIL): New. (arch64_opcode_table): Add ldraa, ldrab. (AARCH64_OPERANDS): Add "ADDR_SIMM10". * aarch64-asm.h (aarch64_ins_addr_simm10): Declare. * aarch64-asm.c (aarch64_ins_addr_simm10): Define. * aarch64-dis.h (aarch64_ext_addr_simm10): Declare. * aarch64-dis.c (aarch64_ext_addr_simm10): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_S_simm10. * aarch64-opc.c (fields): Add data for FLD_S_simm10. (operand_general_constraint_met_p): Handle AARCH64_OPND_ADDR_SIMM10. (aarch64_print_operand): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_ADDR_SIMM10. (fix_insn): Likewise. (warn_unpredictable_ldst): Handle ldst_imm10. * testsuite/gas/aarch64/pac.s: Add ldraa and ldrab tests. * testsuite/gas/aarch64/pac.d: Likewise. * testsuite/gas/aarch64/illegal-ldraa.s: New. * testsuite/gas/aarch64/illegal-ldraa.l: New. * testsuite/gas/aarch64/illegal-ldraa.d: New.	10 years ago
Szabolcs Nagy	c84364ece4	[AArch64] Add ARMv8.3 PACGA instruction Add support for the ARMv8.3 PACGA instruction. include/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_Rm_SP. opcodes/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (arch64_opcode_table): Add pacga. (AARCH64_OPERANDS): Add Rm_SP. * aarch64-opc.c (aarch64_print_operand): Handle AARCH64_OPND_Rm_SP. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (process_omitted_operand): Handle AARCH64_OPND_Rm_SP. (parse_operands): Likewise. * testsuite/gas/aarch64/pac.s: Add pacga. * testsuite/gas/aarch64/pac.d: Add pacga.	10 years ago
Szabolcs Nagy	1924ff7567	[AArch64] Add ARMv8.3 command line option and feature flag ARMv8.3 can be selected with -march=armv8.3-a command line option. An overview of the ARMv8.3 architecture extension is at https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions gas/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a". * doc/c-aarch64.texi (-march): Likewise. include/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_3): Define. (AARCH64_ARCH_V8_3): Define. (AARCH64_ARCH_V8_1, AARCH64_ARCH_V8_2): Simplify.	10 years ago
Thomas Preud'homme	d46a216553	Commit missing ChangeLog entry for Cortex-M33 support 2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com> include/ * opcode/arm.h (ARM_AEXT_V8M_MAIN_DSP): Define. (ARM_AEXT2_V8M_MAIN_DSP): Likewise. (ARM_ARCH_V8M_MAIN_DSP): Likewise.	10 years ago
Graham Markall	5a736821ef	arc: Implement NPS-400 dcmac instruction gas/ChangeLog: * testsuite/gas/arc/nps-400-9.d: Added. * testsuite/gas/arc/nps-400-9.s: Added. include/ChangeLog: * opcode/arc.h: Add PROTOCOL_DECODE to insn_class_t. opcodes/ChangeLog: * arc-dis.c (arc_insn_length): Return length 8 for instructions with major opcode 0xa. * arc-nps-400-tbl.h: Add dcmac instruction. * arc-opc.c (arc_operands): Added operands for dcmac instruction. (insert_nps_rbdouble_64): Added. (extract_nps_rbdouble_64): Added. (insert_nps_proto_size): Added. (extract_nps_proto_size): Added.	10 years ago
Andrew Burgess	bdfe53e3cf	arc: Change max instruction length to 64-bits The current handling for arc instructions longer than 32-bits is all handled as a special case in both the assembler and disassembler. The problem with this approach is that it leads to code duplication, selecting a long instruction is exactly the same process as selecting a short instruction, except over more bits, in both cases we select based on bit comparison, and initial operand insertion and extraction. This commit unifies both the long and short instruction worlds, converting the core opcodes library from being largely 32-bit focused, to being largely 64-bit focused. The changes are, on the whole, not too much. There's obviously a lot of type changes but otherwise the bulk of the code just works. Most of the actual functional changes are to code that previously handled the longer 48 or 64 bit instructions. The insert/extract handlers for these have now been brought into line with the short instruction insert/extract handlers. All of the special case handling code that was previously added has now been removed again. Overall, this commit reduces the amount of code in the arc assembler and disassembler. gas/ChangeLog: * config/tc-arc.c (struct arc_insn): Change type of insn field. (md_number_to_chars_midend): Support 6- and 8-byte values. (emit_insn0): Update debug output. (find_opcode_match): Likewise. (build_fake_opcode_hash_entry): Delete. (find_special_case_long_opcode): Delete. (find_special_case): Remove long format special case handling. (insert_operand): Change instruction type and update debug print format. (assemble_insn): Change instruction type, update debug print formats, and remove unneeded assert. include/ChangeLog: * opcode/arc.h (struct arc_opcode): Change type of opcode and mask fields. (struct arc_long_opcode): Delete. (struct arc_operand): Change types for insert and extract handlers. opcodes/ChangeLog: * arc-dis.c (struct arc_operand_iterator): Remove all fields relating to long instruction processing, add new limm field. (OPCODE): Rename to... (OPCODE_32BIT_INSN): ...this. (OPCODE_AC): Delete. (skip_this_opcode): Handle different instruction lengths, update macro name. (special_flag_p): Update parameter type. (find_format_from_table): Update for more instruction lengths. (find_format_long_instructions): Delete. (find_format): Update for more instruction lengths. (arc_insn_length): Likewise. (extract_operand_value): Update for more instruction lengths. (operand_iterator_next): Remove code relating to long instructions. (arc_opcode_to_insn_type): New function. (print_insn_arc):Update for more instructions lengths. * arc-ext.c (extInstruction_t): Change argument type. * arc-ext.h (extInstruction_t): Change argument type. * arc-fxi.h: Change type unsigned to unsigned long long extensively throughout. * arc-nps400-tbl.h: Add long instructions taken from arc_long_opcodes table in arc-opc.c. * arc-opc.c: Update parameter types on insert/extract handlers. (arc_long_opcodes): Delete. (arc_num_long_opcodes): Delete. (arc_opcode_len): Update for more instruction lengths.	10 years ago
Graham Markall	2e27220211	opcodes/arc: Make some macros 64-bit safe In preparation to moving to a world where arc instructions can be 2, 4, 6, or 8 bytes long, make some macros 64-bit safe. There should be no functional change after this commit. include/ChangeLog: * opcode/arc.h: Make macros 64-bit safe.	10 years ago
Graham Markall	06fe285fd2	arc: Replace ARC_SHORT macro with arc_opcode_len function In preparation for moving to a world where arc instructions can be 2, 4, 6, or 8 bytes in length, replace the ARC_SHORT macro (which is either true of false) with an arc_opcode_len function that returns a length in bytes. There should be no functional change after this commit. gas/ChangeLog: * config/tc-arc.c (assemble_insn): Replace use of ARC_SHORT with arc_opcode_len. include/ChangeLog: * opcode/arc.h (arc_opcode_len): Declare. (ARC_SHORT): Delete. opcodes/ChangeLog: * arc-dis.c (find_format_from_table): Replace use of ARC_SHORT with arc_opcode_len. (find_format_long_instructions): Likewise. * arc-opc.c (arc_opcode_len): New function.	10 years ago
Nick Clifton	e23eba971d	Add support for RISC-V architecture. bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file.	10 years ago
Nick Clifton	6d91379408	Update list of ELF machine numbers. include * elf/common.h (DT_SYMTAB_SHNDX): Define. (EM_CLOUDSHIELD, EM_COREA_1ST, EM_COREA_2ND, EM_OPEN8): Define. (EM_VIDEOCORE5, EM_56800EX, EM_BA1, EM_BA2, EM_XCORE): Define. (EM_MCHP_PIC, EM_KM32, EM_KMX32, EM_KMX16, EM_KMX8): Define. (EM_KVARC, EM_CDP, EM_COGE, EM_COOL, EM_NORC): Define. (EM_CSR_KALIMBA, EM_Z80, EM_AMDGPU, EM_RISCV): Define. (ELFOSABI_OPENVOS): Define. (GRP_MASKOS, GRP_MASKPROC): Define. binutils * readelf.c (get_dynamic_type): Add DT_SYMTAB_SHNDX. (get_machine_type): Add EM_CLOUDSHIELD, EM_COREA_1ST, EM_COREA_2ND, EM_OPEN8, EM_VIDEOCORE5, EM_56800EX, EM_BA1, EM_BA2, EM_XCORE, EM_MCHP_PIC, EM_KM32, EM_KMX32, EM_KMX16, EM_KMX8, EM_KVARC, EM_CDP, EM_COGE, EM_COOL, EM_NORC, EM_CSR_KALIMBA, EM_Z80, EM_AMDGPU, EM_RISCV. (get_osabi_name): Add ELFOSABI_CLOUDABI and ELFOSABI_OPENVS. (get_group_flags): Update to handle flags in the GRP_MASKOS and GRP_MASKPROC ranges.	10 years ago
Pedro Alves	b4f6af8ee2	FINAL/OVERRIDE: Define to empty on g++ < 4.7 final/override were only implemented in g++ 4.7. include/ChangeLog 2016-10-14 Pedro Alves <palves@redhat.com> * ansidecl.h [__cplusplus >= 201103 && GCC_VERSION < 4007] (FINAL, OVERRIDE): Define as empty. [__cplusplus < 201103 && GCC_VERSION < 4007] (FINAL): Define as __final. [__cplusplus < 201103 && GCC_VERSION >= 4007] (OVERRIDE): Define as empty.	10 years ago
Pedro Alves	d118ee3761	Move OVERRIDE/FINAL from gcc/coretypes.h to include/ansidecl.h So that GDB and other projects that share the top level can use them. Bootstrapped with all default languages + jit on x86-64 Fedora 23. gcc/ChangeLog: 2016-10-14 Pedro Alves <palves@redhat.com> * coretypes.h (OVERRIDE, FINAL): Delete, moved to include/ansidecl.h. include/ChangeLog: 2016-10-14 Pedro Alves <palves@redhat.com> * ansidecl.h (GCC_FINAL): Delete. (OVERRIDE, FINAL): New, moved from gcc/coretypes.h.	10 years ago
Claudiu Zissulescu	e5b06ef06b	[ARC] Disassembler: fix LIMM detection for short instructions. The ARC (short) instructions are using a special register number to indicate is the instruction uses a long immediate (LIMM). In the case of short instruction, this LIMM indicator depends on the ISA version used. Thus, for ARCv1 processors, the LIMM indicator is 0x3E, the same value used in "long" instructions. However, for the ARCv2 processors, this LIMM indicator is 0x1E. This patch fixes the LIMM detection for ARCv1 ISA and adds two tests. gas/ 2016-10-13 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/shortlimm_a7.d: New file. * testsuite/gas/arc/shortlimm_a7.s: Likewise. * testsuite/gas/arc/shortlimm_hs.d: Likewise. * testsuite/gas/arc/shortlimm_hs.s: Likewise. include/ 2016-10-13 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (ARC_OPCODE_ARCV2): New define. opcodes/ 2016-10-13 Claudiu Zissulescu <claziss@synopsys.com> * arc-dis.c (find_format_from_table): Discriminate LIMM indicator usage on ISA basis.	10 years ago
Alan Modra	a5721ba270	Disallow 3-operand cmp[l][i] for ppc64 cmp[l][o] get an optional L field only when generating 32-bit code. dcbf, tlbie and tlbiel keep their optional L field, ditto for R field of tbegin. cmprb, tsr., wlcr[all] and mtsle all change to a compulsory L field. L field of dcbf and wclr is 2 bits. PR 20641 include/ * opcode/ppc.h (PPC_OPERAND_OPTIONAL32): Define. opcodes/ * ppc-opc.c (L): Make compulsory. (LOPT): New, optional form of L. (HTM_R): Define as LOPT. (L0, L1): Delete. (L32OPT): New, optional for 32-bit L. (L2OPT): New, 2-bit L for dcbf. (SVC_LEC): Update. (L2): Define. (insert_l0, extract_l0, insert_l1, extract_l2): Delete. (powerpc_opcodes <cmpli, cmpi, cmpl, cmp>): Use L32OPT. <dcbf>: Use L2OPT. <tlbiel, tlbie>: Use LOPT. <wclr, wclrall>: Use L2. gas/ * config/tc-ppc.c (md_assemble): Handle PPC_OPERAND_OPTIONAL32. * testsuite/gas/ppc/power8.s: Provide tbegin. operand. * testsuite/gas/ppc/power9.d: Update cmprb disassembly.	10 years ago
Claudiu Zissulescu	2b848ebdbb	[ARC] ISA alignment. include/ 2016-09-26 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (insn_class_t): Add two new classes. opcodes/ 2016-09-26 Claudiu Zissulescu <claziss@synopsys.com> * arc-ext-tbl.h (EXTINSN2OPF): Define. (EXTINSN2OP): Use EXTINSN2OPF. (bspeekm, bspop, modapp): New extension instructions. * arc-opc.c (F_DNZ_ND): Define. (F_DNZ_D): Likewise. (F_SIZEB1): Changed. (C_DNZ_D): Define. (C_HARD): Changed. * arc-tbl.h (dbnz): New instruction. (prealloc): Allow it for ARC EM. (xbfu): Likewise.	10 years ago
Alan Modra	005d79fd61	PowerPC .gnu.attributes This patch extends Tag_GNU_Power_ABI_FP to cover long double ABIs, makes the assembler warn about undefined tag values, and removes similar warnings from the linker. I think it is better to not warn in the linker about undefined tag values as future extensions to the tags then won't result in likely bogus warnings. This is consistent with the fact that an older linker won't warn on an entirely new tag. include/ * elf/ppc.h (Tag_GNU_Power_ABI_FP): Comment. bfd/ * elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Declare. * elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): New function. (ppc_elf_merge_obj_attributes): Use it. Don't copy first file attributes, merge them. Don't warn about undefined tag bits, or copy unknown values to output. * elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Call _bfd_elf_ppc_merge_fp_attributes. binutils/ * readelf.c (display_power_gnu_attribute): Catch truncated section for all powerpc attributes. Display long double ABI. Don't capitalize words, except for names. Show known bits of tag values when some unknown bits are present. Whitespace fixes. gas/ * config/tc-ppc.c (ppc_elf_gnu_attribute): New function. (md_pseudo_table <ELF>): Handle "gnu_attribute". ld/ * testsuite/ld-powerpc/attr-gnu-4-4.s: Delete. * testsuite/ld-powerpc/attr-gnu-4-14.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-24.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-34.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-41.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning. * testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output. * testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise. * testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise. * testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests.	10 years ago
Richard Sandiford	bb7eff5206	[AArch64] Add SVE condition codes SVE defines new names for existing NZCV conditions, to reflect the result of instructions like PTEST. This patch adds support for these names. The patch also adds comments to the disassembly output to show the alternative names of a condition code. For example: cinv x0, x1, cc becomes: cinv x0, x1, cc // cc = lo, ul, last and: b.cc f0 <...> becomes: b.cc f0 <...> // b.lo, b.ul, b.last Doing this for the SVE names follows the practice recommended by the SVE specification and is definitely useful when reading SVE code. If the feeling is that it's too distracting elsewhere, we could add an option to turn it off. include/ * opcode/aarch64.h (aarch64_cond): Bump array size to 4. opcodes/ * aarch64-dis.c (remove_dot_suffix): New function, split out from... (print_mnemonic_name): ...here. (print_comment): New function. (print_aarch64_insn): Call it. * aarch64-opc.c (aarch64_conds): Add SVE names. (aarch64_print_operand): Print alternative condition names in a comment. gas/ * config/tc-aarch64.c (opcode_lookup): Search for the end of a condition name, rather than assuming that it will have exactly 2 characters. (parse_operands): Likewise. * testsuite/gas/aarch64/alias.d: Add new condition-code comments to the expected output. * testsuite/gas/aarch64/beq_1.d: Likewise. * testsuite/gas/aarch64/float-fp16.d: Likewise. * testsuite/gas/aarch64/int-insns.d: Likewise. * testsuite/gas/aarch64/no-aliases.d: Likewise. * testsuite/gas/aarch64/programmer-friendly.d: Likewise. * testsuite/gas/aarch64/reloc-insn.d: Likewise. * testsuite/gas/aarch64/b_c_1.d, testsuite/gas/aarch64/b_c_1.s: New test. ld/ * testsuite/ld-aarch64/emit-relocs-280.d: Match branch comments. * testsuite/ld-aarch64/weak-undefined.d: Likewise.	10 years ago
Richard Sandiford	c0890d2628	[AArch64][SVE 31/32] Add SVE instructions This patch adds the SVE instruction definitions and associated OP_* enum values. include/ * opcode/aarch64.h (AARCH64_FEATURE_SVE): New macro. (OP_MOV_P_P, OP_MOV_Z_P_Z, OP_MOV_Z_V, OP_MOV_Z_Z, OP_MOV_Z_Zi) (OP_MOVM_P_P_P, OP_MOVS_P_P, OP_MOVZS_P_P_P, OP_MOVZ_P_P_P) (OP_NOTS_P_P_P_Z, OP_NOT_P_P_P_Z): New aarch64_ops. opcodes/ * aarch64-tbl.h (OP_SVE_B, OP_SVE_BB, OP_SVE_BBBU, OP_SVE_BMB) (OP_SVE_BPB, OP_SVE_BUB, OP_SVE_BUBB, OP_SVE_BUU, OP_SVE_BZ) (OP_SVE_BZB, OP_SVE_BZBB, OP_SVE_BZU, OP_SVE_DD, OP_SVE_DDD) (OP_SVE_DMD, OP_SVE_DMH, OP_SVE_DMS, OP_SVE_DU, OP_SVE_DUD, OP_SVE_DUU) (OP_SVE_DUV_BHS, OP_SVE_DUV_BHSD, OP_SVE_DZD, OP_SVE_DZU, OP_SVE_HB) (OP_SVE_HMD, OP_SVE_HMS, OP_SVE_HU, OP_SVE_HUU, OP_SVE_HZU, OP_SVE_RR) (OP_SVE_RURV_BHSD, OP_SVE_RUV_BHSD, OP_SVE_SMD, OP_SVE_SMH, OP_SVE_SMS) (OP_SVE_SU, OP_SVE_SUS, OP_SVE_SUU, OP_SVE_SZS, OP_SVE_SZU, OP_SVE_UB) (OP_SVE_UUD, OP_SVE_UUS, OP_SVE_VMR_BHSD, OP_SVE_VMU_SD) (OP_SVE_VMVD_BHS, OP_SVE_VMVU_BHSD, OP_SVE_VMVU_SD, OP_SVE_VMVV_BHSD) (OP_SVE_VMVV_SD, OP_SVE_VMV_BHSD, OP_SVE_VMV_HSD, OP_SVE_VMV_SD) (OP_SVE_VM_SD, OP_SVE_VPU_BHSD, OP_SVE_VPV_BHSD, OP_SVE_VRR_BHSD) (OP_SVE_VRU_BHSD, OP_SVE_VR_BHSD, OP_SVE_VUR_BHSD, OP_SVE_VUU_BHSD) (OP_SVE_VUVV_BHSD, OP_SVE_VUVV_SD, OP_SVE_VUV_BHSD, OP_SVE_VUV_SD) (OP_SVE_VU_BHSD, OP_SVE_VU_HSD, OP_SVE_VU_SD, OP_SVE_VVD_BHS) (OP_SVE_VVU_BHSD, OP_SVE_VVVU_SD, OP_SVE_VVV_BHSD, OP_SVE_VVV_SD) (OP_SVE_VV_BHSD, OP_SVE_VV_HSD_BHS, OP_SVE_VV_SD, OP_SVE_VWW_BHSD) (OP_SVE_VXX_BHSD, OP_SVE_VZVD_BHS, OP_SVE_VZVU_BHSD, OP_SVE_VZVV_BHSD) (OP_SVE_VZVV_SD, OP_SVE_VZV_SD, OP_SVE_V_SD, OP_SVE_WU, OP_SVE_WV_BHSD) (OP_SVE_XU, OP_SVE_XUV_BHSD, OP_SVE_XVW_BHSD, OP_SVE_XV_BHSD) (OP_SVE_XWU, OP_SVE_XXU): New macros. (aarch64_feature_sve): New variable. (SVE): New macro. (_SVE_INSN): Likewise. (aarch64_opcode_table): Add SVE instructions. * aarch64-opc.h (extract_fields): Declare. * aarch64-opc-2.c: Regenerate. * aarch64-asm.c (do_misc_encoding): Handle the new SVE aarch64_ops. * aarch64-asm-2.c: Regenerate. * aarch64-dis.c (extract_fields): Make global. (do_misc_decoding): Handle the new SVE aarch64_ops. * aarch64-dis-2.c: Regenerate. gas/ * doc/c-aarch64.texi: Document the "sve" feature. * config/tc-aarch64.c (REG_TYPE_R_Z_BHSDQ_VZP): New register type. (get_reg_expected_msg): Handle it. (parse_operands): When parsing operands of an SVE instruction, disallow immediates that match REG_TYPE_R_Z_BHSDQ_VZP. (aarch64_features): Add an entry for SVE.	10 years ago
Richard Sandiford	116b601937	[AArch64][SVE 30/32] Add SVE instruction classes The main purpose of the SVE aarch64_insn_classes is to describe how an index into an aarch64_opnd_qualifier_seq_t is represented in the instruction encoding. Other instructions usually use flags for this information, but (a) we're running out of those and (b) the iclass would otherwise be unused for SVE. include/ * opcode/aarch64.h (sve_cpy, sve_index, sve_limm, sve_misc) (sve_movprfx, sve_pred_zm, sve_shift_pred, sve_shift_unpred) (sve_size_bhs, sve_size_bhsd, sve_size_hsd, sve_size_sd): New aarch64_insn_classes. opcodes/ * aarch64-opc.h (FLD_SVE_M_4, FLD_SVE_M_14, FLD_SVE_M_16) (FLD_SVE_sz, FLD_SVE_tsz, FLD_SVE_tszl_8, FLD_SVE_tszl_19): New aarch64_field_kinds. * aarch64-opc.c (fields): Add corresponding entries. * aarch64-asm.c (aarch64_get_variant): New function. (aarch64_encode_variant_using_iclass): Likewise. (aarch64_opcode_encode): Call it. * aarch64-dis.c (aarch64_decode_variant_using_iclass): New function. (aarch64_opcode_decode): Call it.	10 years ago
Richard Sandiford	047cd301d4	[AArch64][SVE 29/32] Add new SVE core & FP register operands SVE uses some new fields to store W, X and scalar FP registers. This patch adds corresponding operands. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_Rm): New aarch64_opnd. (AARCH64_OPND_SVE_Rn_SP, AARCH64_OPND_SVE_VZn, AARCH64_OPND_SVE_Vd) (AARCH64_OPND_SVE_Vm, AARCH64_OPND_SVE_Vn): Likewise. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE core and FP register operands. * aarch64-opc.h (FLD_SVE_Rm, FLD_SVE_Rn, FLD_SVE_Vd, FLD_SVE_Vm) (FLD_SVE_Vn): New aarch64_field_kinds. * aarch64-opc.c (fields): Add corresponding entries. (aarch64_print_operand): Handle the new SVE core and FP register operands. * aarch64-opc-2.c: Regenerate. * aarch64-asm-2.c: Likewise. * aarch64-dis-2.c: Likewise. gas/ * config/tc-aarch64.c (parse_operands): Handle the new SVE core and FP register operands.	10 years ago
Richard Sandiford	165d495085	[AArch64][SVE 28/32] Add SVE FP immediate operands This patch adds support for the new SVE floating-point immediate operands. One operand uses the same 8-bit encoding as base AArch64, but in a different position. The others use a single bit to select between two values. One of the single-bit operands is a choice between 0 and 1, where 0 is not a valid 8-bit encoding. I think the cleanest way of handling these single-bit immediates is therefore to use the IEEE float encoding itself as the immediate value and select between the two possible values when encoding and decoding. As described in the covering note for the patch that added F_STRICT, we get better error messages by accepting unsuffixed vector registers and leaving the qualifier matching code to report an error. This means that we carry on parsing the other operands, and so can try to parse FP immediates for invalid instructions like: fcpy z0, #2.5 In this case there is no suffix to tell us whether the immediate should be treated as single or double precision. Again, we get better error messages by picking one (arbitrary) immediate size and reporting an error for the missing suffix later. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_FPIMM8): New aarch64_opnd. (AARCH64_OPND_SVE_I1_HALF_ONE, AARCH64_OPND_SVE_I1_HALF_TWO) (AARCH64_OPND_SVE_I1_ZERO_ONE): Likewise. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE FP immediate operands. * aarch64-opc.h (FLD_SVE_i1): New aarch64_field_kind. * aarch64-opc.c (fields): Add corresponding entry. (operand_general_constraint_met_p): Handle the new SVE FP immediate operands. (aarch64_print_operand): Likewise. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_float_half_one, ins_sve_float_half_two) (ins_sve_float_zero_one): New inserters. * aarch64-asm.c (aarch64_ins_sve_float_half_one): New function. (aarch64_ins_sve_float_half_two): Likewise. (aarch64_ins_sve_float_zero_one): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_float_half_one, ext_sve_float_half_two) (ext_sve_float_zero_one): New extractors. * aarch64-dis.c (aarch64_ext_sve_float_half_one): New function. (aarch64_ext_sve_float_half_two): Likewise. (aarch64_ext_sve_float_zero_one): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (double_precision_operand_p): New function. (parse_operands): Use it to calculate the dp_p input to parse_aarch64_imm_float. Handle the new SVE FP immediate operands.	10 years ago
Richard Sandiford	e950b34539	[AArch64][SVE 27/32] Add SVE integer immediate operands This patch adds the new SVE integer immediate operands. There are three kinds: - simple signed and unsigned ranges, but with new widths and positions. - 13-bit logical immediates. These have the same form as in base AArch64, but at a different bit position. In the case of the "MOV Zn.<T>, #<limm>" alias of DUPM, the logical immediate <limm> is not allowed to be a valid DUP immediate, since DUP is preferred over DUPM for constants that both instructions can handle. - a new 9-bit arithmetic immediate, of the form "<imm8>{, LSL #8}". In some contexts the operand is signed and in others it's unsigned. As an extension, we allow shifted immediates to be written as a single integer, e.g. "#256" is equivalent to "#1, LSL #8". We also use the shiftless form as the preferred disassembly, except for the special case of "#0, LSL #8" (a redundant encoding of 0). include/ * opcode/aarch64.h (AARCH64_OPND_SIMM5): New aarch64_opnd. (AARCH64_OPND_SVE_AIMM, AARCH64_OPND_SVE_ASIMM) (AARCH64_OPND_SVE_INV_LIMM, AARCH64_OPND_SVE_LIMM) (AARCH64_OPND_SVE_LIMM_MOV, AARCH64_OPND_SVE_SHLIMM_PRED) (AARCH64_OPND_SVE_SHLIMM_UNPRED, AARCH64_OPND_SVE_SHRIMM_PRED) (AARCH64_OPND_SVE_SHRIMM_UNPRED, AARCH64_OPND_SVE_SIMM5) (AARCH64_OPND_SVE_SIMM5B, AARCH64_OPND_SVE_SIMM6) (AARCH64_OPND_SVE_SIMM8, AARCH64_OPND_SVE_UIMM3) (AARCH64_OPND_SVE_UIMM7, AARCH64_OPND_SVE_UIMM8) (AARCH64_OPND_SVE_UIMM8_53): Likewise. (aarch64_sve_dupm_mov_immediate_p): Declare. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE integer immediate operands. * aarch64-opc.h (FLD_SVE_immN, FLD_SVE_imm3, FLD_SVE_imm5) (FLD_SVE_imm5b, FLD_SVE_imm7, FLD_SVE_imm8, FLD_SVE_imm9) (FLD_SVE_immr, FLD_SVE_imms, FLD_SVE_tszh): New aarch64_field_kinds. * aarch64-opc.c (fields): Add corresponding entries. (operand_general_constraint_met_p): Handle the new SVE integer immediate operands. (aarch64_print_operand): Likewise. (aarch64_sve_dupm_mov_immediate_p): New function. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_inv_limm, ins_sve_aimm, ins_sve_asimm) (ins_sve_limm_mov, ins_sve_shlimm, ins_sve_shrimm): New inserters. * aarch64-asm.c (aarch64_ins_limm_1): New function, split out from... (aarch64_ins_limm): ...here. (aarch64_ins_inv_limm): New function. (aarch64_ins_sve_aimm): Likewise. (aarch64_ins_sve_asimm): Likewise. (aarch64_ins_sve_limm_mov): Likewise. (aarch64_ins_sve_shlimm): Likewise. (aarch64_ins_sve_shrimm): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_inv_limm, ext_sve_aimm, ext_sve_asimm) (ext_sve_limm_mov, ext_sve_shlimm, ext_sve_shrimm): New extractors. * aarch64-dis.c (decode_limm): New function, split out from... (aarch64_ext_limm): ...here. (aarch64_ext_inv_limm): New function. (decode_sve_aimm): Likewise. (aarch64_ext_sve_aimm): Likewise. (aarch64_ext_sve_asimm): Likewise. (aarch64_ext_sve_limm_mov): Likewise. (aarch64_top_bit): Likewise. (aarch64_ext_sve_shlimm): Likewise. (aarch64_ext_sve_shrimm): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (parse_operands): Handle the new SVE integer immediate operands.	10 years ago
Richard Sandiford	98907a7049	[AArch64][SVE 26/32] Add SVE MUL VL addressing modes This patch adds support for addresses of the form: [<base>, #<offset>, MUL VL] This involves adding a new AARCH64_MOD_MUL_VL modifier, which is why I split it out from the other addressing modes. For LD2, LD3 and LD4, the offset must be a multiple of the structure size, so for LD3 the possible values are 0, 3, 6, .... The patch therefore extends value_aligned_p to handle non-power-of-2 alignments. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4xVL): New aarch64_opnd. (AARCH64_OPND_SVE_ADDR_RI_S4x2xVL, AARCH64_OPND_SVE_ADDR_RI_S4x3xVL) (AARCH64_OPND_SVE_ADDR_RI_S4x4xVL, AARCH64_OPND_SVE_ADDR_RI_S6xVL) (AARCH64_OPND_SVE_ADDR_RI_S9xVL): Likewise. (AARCH64_MOD_MUL_VL): New aarch64_modifier_kind. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new MUL VL operands. * aarch64-opc.c (aarch64_operand_modifiers): Initialize the AARCH64_MOD_MUL_VL entry. (value_aligned_p): Cope with non-power-of-two alignments. (operand_general_constraint_met_p): Handle the new MUL VL addresses. (print_immediate_offset_address): Likewise. (aarch64_print_operand): Likewise. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_addr_ri_s4xvl, ins_sve_addr_ri_s6xvl) (ins_sve_addr_ri_s9xvl): New inserters. * aarch64-asm.c (aarch64_ins_sve_addr_ri_s4xvl): New function. (aarch64_ins_sve_addr_ri_s6xvl): Likewise. (aarch64_ins_sve_addr_ri_s9xvl): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_addr_ri_s4xvl, ext_sve_addr_ri_s6xvl) (ext_sve_addr_ri_s9xvl): New extractors. * aarch64-dis.c (aarch64_ext_sve_addr_reg_mul_vl): New function. (aarch64_ext_sve_addr_ri_s4xvl): Likewise. (aarch64_ext_sve_addr_ri_s6xvl): Likewise. (aarch64_ext_sve_addr_ri_s9xvl): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (SHIFTED_NONE, SHIFTED_MUL_VL): New parse_shift_modes. (parse_shift): Handle SHIFTED_MUL_VL. (parse_address_main): Add an imm_shift_mode parameter. (parse_address, parse_sve_address): Update accordingly. (parse_operands): Handle MUL VL addressing modes.	10 years ago
Richard Sandiford	4df068de52	[AArch64][SVE 25/32] Add support for SVE addressing modes This patch adds most of the new SVE addressing modes and associated operands. A follow-on patch adds MUL VL, since handling it separately makes the changes easier to read. The patch also introduces a new "operand-dependent data" field to the operand flags, based closely on the existing one for opcode flags. For SVE this new field needs only 2 bits, but it could be widened in future if necessary. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_U6): New aarch64_opnd. (AARCH64_OPND_SVE_ADDR_RI_U6x2, AARCH64_OPND_SVE_ADDR_RI_U6x4) (AARCH64_OPND_SVE_ADDR_RI_U6x8, AARCH64_OPND_SVE_ADDR_RR) (AARCH64_OPND_SVE_ADDR_RR_LSL1, AARCH64_OPND_SVE_ADDR_RR_LSL2) (AARCH64_OPND_SVE_ADDR_RR_LSL3, AARCH64_OPND_SVE_ADDR_RX) (AARCH64_OPND_SVE_ADDR_RX_LSL1, AARCH64_OPND_SVE_ADDR_RX_LSL2) (AARCH64_OPND_SVE_ADDR_RX_LSL3, AARCH64_OPND_SVE_ADDR_RZ) (AARCH64_OPND_SVE_ADDR_RZ_LSL1, AARCH64_OPND_SVE_ADDR_RZ_LSL2) (AARCH64_OPND_SVE_ADDR_RZ_LSL3, AARCH64_OPND_SVE_ADDR_RZ_XTW_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW_22, AARCH64_OPND_SVE_ADDR_RZ_XTW1_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW1_22, AARCH64_OPND_SVE_ADDR_RZ_XTW2_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW2_22, AARCH64_OPND_SVE_ADDR_RZ_XTW3_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW3_22, AARCH64_OPND_SVE_ADDR_ZI_U5) (AARCH64_OPND_SVE_ADDR_ZI_U5x2, AARCH64_OPND_SVE_ADDR_ZI_U5x4) (AARCH64_OPND_SVE_ADDR_ZI_U5x8, AARCH64_OPND_SVE_ADDR_ZZ_LSL) (AARCH64_OPND_SVE_ADDR_ZZ_SXTW, AARCH64_OPND_SVE_ADDR_ZZ_UXTW): Likewise. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE address operands. * aarch64-opc.h (FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14) (FLD_SVE_xs_22): New aarch64_field_kinds. (OPD_F_OD_MASK, OPD_F_OD_LSB, OPD_F_NO_ZR): New flags. (get_operand_specific_data): New function. * aarch64-opc.c (fields): Add entries for FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14 and FLD_SVE_xs_22. (operand_general_constraint_met_p): Handle the new SVE address operands. (sve_reg): New array. (get_addr_sve_reg_name): New function. (aarch64_print_operand): Handle the new SVE address operands. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_addr_ri_u6, ins_sve_addr_rr_lsl) (ins_sve_addr_rz_xtw, ins_sve_addr_zi_u5, ins_sve_addr_zz_lsl) (ins_sve_addr_zz_sxtw, ins_sve_addr_zz_uxtw): New inserters. * aarch64-asm.c (aarch64_ins_sve_addr_ri_u6): New function. (aarch64_ins_sve_addr_rr_lsl): Likewise. (aarch64_ins_sve_addr_rz_xtw): Likewise. (aarch64_ins_sve_addr_zi_u5): Likewise. (aarch64_ins_sve_addr_zz): Likewise. (aarch64_ins_sve_addr_zz_lsl): Likewise. (aarch64_ins_sve_addr_zz_sxtw): Likewise. (aarch64_ins_sve_addr_zz_uxtw): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_addr_ri_u6, ext_sve_addr_rr_lsl) (ext_sve_addr_rz_xtw, ext_sve_addr_zi_u5, ext_sve_addr_zz_lsl) (ext_sve_addr_zz_sxtw, ext_sve_addr_zz_uxtw): New extractors. * aarch64-dis.c (aarch64_ext_sve_add_reg_imm): New function. (aarch64_ext_sve_addr_ri_u6): Likewise. (aarch64_ext_sve_addr_rr_lsl): Likewise. (aarch64_ext_sve_addr_rz_xtw): Likewise. (aarch64_ext_sve_addr_zi_u5): Likewise. (aarch64_ext_sve_addr_zz): Likewise. (aarch64_ext_sve_addr_zz_lsl): Likewise. (aarch64_ext_sve_addr_zz_sxtw): Likewise. (aarch64_ext_sve_addr_zz_uxtw): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (REG_TYPE_SVE_BASE, REG_TYPE_SVE_OFFSET): New register types. (get_reg_expected_msg): Handle them. (aarch64_addr_reg_parse): New function, split out from aarch64_reg_parse_32_64. Handle Z registers too. (aarch64_reg_parse_32_64): Call it. (parse_address_main): Add base_qualifier, offset_qualifier, base_type and offset_type parameters. Handle SVE base and offset registers. (parse_address): Update call to parse_address_main. (parse_sve_address): New function. (parse_operands): Parse the new SVE address operands.	10 years ago
Richard Sandiford	2442d8466e	[AArch64][SVE 24/32] Add AARCH64_OPND_SVE_PATTERN_SCALED Some SVE instructions count the number of elements in a given vector pattern and allow a scale factor of [1, 16] to be applied to the result. This scale factor is written ", MUL #n", where "MUL" is a new operator. E.g.: UQINCD X0, POW2, MUL #2 This patch adds support for this kind of operand. All existing operators were shifts of some kind, so there was a natural range of [0, 63] regardless of context. This was then narrowered further by later checks (e.g. to [0, 31] when used for 32-bit values). In contrast, MUL doesn't really have a natural context-independent range. Rather than pick one arbitrarily, it seemed better to make the "shift" amount a full 64-bit value and leave the range test to the usual operand-checking code. I've rearranged the fields of aarch64_opnd_info so that this doesn't increase the size of the structure (although I don't think its size is critical anyway). include/ * opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN_SCALED): New aarch64_opnd. (AARCH64_MOD_MUL): New aarch64_modifier_kind. (aarch64_opnd_info): Make shifter.amount an int64_t and rearrange the fields. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add an entry for AARCH64_OPND_SVE_PATTERN_SCALED. * aarch64-opc.h (FLD_SVE_imm4): New aarch64_field_kind. * aarch64-opc.c (fields): Add a corresponding entry. (set_multiplier_out_of_range_error): New function. (aarch64_operand_modifiers): Add entry for AARCH64_MOD_MUL. (operand_general_constraint_met_p): Handle AARCH64_OPND_SVE_PATTERN_SCALED. (print_register_offset_address): Use PRIi64 to print the shift amount. (aarch64_print_operand): Likewise. Handle AARCH64_OPND_SVE_PATTERN_SCALED. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_scale): New inserter. * aarch64-asm.c (aarch64_ins_sve_scale): New function. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_scale): New inserter. * aarch64-dis.c (aarch64_ext_sve_scale): New function. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (SHIFTED_MUL): New parse_shift_mode. (parse_shift): Handle it. Reject AARCH64_MOD_MUL for all other shift modes. Skip range tests for AARCH64_MOD_MUL. (process_omitted_operand): Handle AARCH64_OPND_SVE_PATTERN_SCALED. (parse_operands): Likewise.	10 years ago
Richard Sandiford	245d2e3fe8	[AArch64][SVE 23/32] Add SVE pattern and prfop operands The SVE instructions have two enumerated operands: one to select a vector pattern and another to select a prefetch operation. The latter is a cut-down version of the base AArch64 prefetch operation. Both types of operand can also be specified as raw enum values such as #31. Reserved values can only be specified this way. If it hadn't been for the pattern operand, I would have been tempted to use the existing parsing for prefetch operations and add extra checks for SVE. However, since the patterns needed new enum parsing code anyway, it seeemed cleaner to reuse it for the prefetches too. Because of the small number of enum values, I don't think we'd gain anything by using hash tables. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN): New aarch64_opnd. (AARCH64_OPND_SVE_PRFOP): Likewise. (aarch64_sve_pattern_array): Declare. (aarch64_sve_prfop_array): Likewise. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP. * aarch64-opc.h (FLD_SVE_pattern): New aarch64_field_kind. (FLD_SVE_prfop): Likewise. * aarch64-opc.c: Include libiberty.h. (aarch64_sve_pattern_array): New variable. (aarch64_sve_prfop_array): Likewise. (fields): Add entries for FLD_SVE_pattern and FLD_SVE_prfop. (aarch64_print_operand): Handle AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ * config/tc-aarch64.c (parse_enum_string): New function. (po_enum_or_fail): New macro. (parse_operands): Handle AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP.	10 years ago
Richard Sandiford	d50c751e00	[AArch64][SVE 22/32] Add qualifiers for merging and zeroing predication This patch adds qualifiers to represent /z and /m suffixes on predicate registers. include/ * opcode/aarch64.h (AARCH64_OPND_QLF_P_Z): New aarch64_opnd_qualifier. (AARCH64_OPND_QLF_P_M): Likewise. opcodes/ * aarch64-opc.c (aarch64_opnd_qualifiers): Add entries for AARCH64_OPND_QLF_P_[ZM]. (aarch64_print_operand): Print /z and /m where appropriate. gas/ * config/tc-aarch64.c (vector_el_type): Add NT_zero and NT_merge. (parse_vector_type_for_operand): Assert that the skipped character is a '.'. (parse_predication_for_operand): New function. (parse_typed_reg): Parse /z and /m suffixes for predicate registers. (vectype_to_qualifier): Handle NT_zero and NT_merge.	10 years ago
Richard Sandiford	f11ad6bc0f	[AArch64][SVE 21/32] Add Zn and Pn registers This patch adds the Zn and Pn registers, and associated fields and operands. include/ * opcode/aarch64.h (AARCH64_OPND_CLASS_SVE_REG): New aarch64_operand_class. (AARCH64_OPND_CLASS_PRED_REG): Likewise. (AARCH64_OPND_SVE_Pd, AARCH64_OPND_SVE_Pg3, AARCH64_OPND_SVE_Pg4_5) (AARCH64_OPND_SVE_Pg4_10, AARCH64_OPND_SVE_Pg4_16) (AARCH64_OPND_SVE_Pm, AARCH64_OPND_SVE_Pn, AARCH64_OPND_SVE_Pt) (AARCH64_OPND_SVE_Za_5, AARCH64_OPND_SVE_Za_16, AARCH64_OPND_SVE_Zd) (AARCH64_OPND_SVE_Zm_5, AARCH64_OPND_SVE_Zm_16, AARCH64_OPND_SVE_Zn) (AARCH64_OPND_SVE_Zn_INDEX, AARCH64_OPND_SVE_ZnxN) (AARCH64_OPND_SVE_Zt, AARCH64_OPND_SVE_ZtxN): New aarch64_opnds. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new SVE operands. * aarch64-opc.h (FLD_SVE_Pd, FLD_SVE_Pg3, FLD_SVE_Pg4_5) (FLD_SVE_Pg4_10, FLD_SVE_Pg4_16, FLD_SVE_Pm, FLD_SVE_Pn, FLD_SVE_Pt) (FLD_SVE_Za_5, FLD_SVE_Za_16, FLD_SVE_Zd, FLD_SVE_Zm_5, FLD_SVE_Zm_16) (FLD_SVE_Zn, FLD_SVE_Zt, FLD_SVE_tzsh): New aarch64_field_kinds. * aarch64-opc.c (fields): Add corresponding entries here. (operand_general_constraint_met_p): Check that SVE register lists have the correct length. Check the ranges of SVE index registers. Check for cases where p8-p15 are used in 3-bit predicate fields. (aarch64_print_operand): Handle the new SVE operands. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_index, ins_sve_reglist): New inserters. * aarch64-asm.c (aarch64_ins_sve_index): New function. (aarch64_ins_sve_reglist): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_index, ext_sve_reglist): New extractors. * aarch64-dis.c (aarch64_ext_sve_index): New function. (aarch64_ext_sve_reglist): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (NTA_HASVARWIDTH): New macro. (AARCH64_REG_TYPES): Add ZN and PN. (get_reg_expected_msg): Handle them. (parse_vector_type_for_operand): Add a reg_type parameter. Skip the width for Zn and Pn registers. (parse_typed_reg): Extend vector handling to Zn and Pn. Update the call to parse_vector_type_for_operand. Set HASVARTYPE for Zn and Pn, expecting the width to be 0. (parse_vector_reg_list): Restrict error about [BHSD]nn operands to REG_TYPE_VN. (vectype_to_qualifier): Use S_[BHSD] qualifiers for NTA_HASVARWIDTH. (parse_operands): Handle the new Zn and Pn operands. (REGSET16): New macro, split out from... (REGSET31): ...here. (reg_names): Add Zn and Pn entries.	10 years ago

1 Commits (ff7e39b613503fa5d7417e284ee2549117efdb91)