binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Andrew Cagney	0f7d239c5a	* frame.h (select_frame): Delete level parameter. * stack.c (select_frame): Update. Use frame_relative_level to obtain the frame's level. (select_and_print_frame): Update call. (select_frame_command): Ditto. (up_silently_base): Ditto. (down_silently_base): Ditto. * ocd.c (ocd_start_remote): Ditto. * remote-rdp.c (remote_rdp_open): Ditto. * remote-mips.c (mips_initialize): Ditto. (common_open): Ditto. * remote-e7000.c (e7000_start_remote): Ditto. * m3-nat.c (select_thread): Ditto. * hppa-tdep.c (child_get_current_exception_event): Ditto. (child_get_current_exception_event): Ditto. * varobj.c (varobj_create): Ditto. (varobj_update): Ditto. (c_value_of_root): Ditto. * tracepoint.c (finish_tfind_command): Ditto. * corelow.c (core_open): Ditto. * arch-utils.c (generic_prepare_to_proceed): Ditto. * thread.c (info_threads_command): Ditto. (switch_to_thread): Ditto. * infrun.c (normal_stop): Ditto. (restore_selected_frame): Ditto. (restore_inferior_status): Ditto. * breakpoint.c (insert_breakpoints): Ditto. (watchpoint_check): Ditto. (bpstat_stop_status): Ditto. (do_enable_breakpoint): Ditto. * blockframe.c (flush_cached_frames): Ditto. (reinit_frame_cache): Ditto.	24 years ago
Elena Zannoni	7aa83cacfa	2002-04-07 Elena Zannoni <ezannoni@redhat.com> * remote-e7000.c (write_small, e7000_read_inferior_memory, e7000_read_inferior_memory_large, e7000_insert_breakpoint, e7000_remove_breakpoint): Use paddr_nz() to print addresses.	24 years ago
Andrew Cagney	0a65a603d3	Remove ATTRIBUTE_UNUSED. Update (C).	25 years ago
Andrew Cagney	2cd58942b9	* serial.h (SERIAL_ASYNC): Delete. (DEPRECATED_SERIAL_FD): Delete. (SERIAL_DEBUG): Delete. (SERIAL_DEBUG_P): Delete. (SERIAL_DRAIN_OUTPUT): Delete. (SERIAL_FLUSH_OUTPUT): Delete. (SERIAL_FLUSH_INPUT): Delete. (SERIAL_SEND_BREAK): Delete. (SERIAL_RAW): Delete. (SERIAL_GET_TTY_STATE): Delete. (SERIAL_SET_TTY_STATE): Delete. (SERIAL_PRINT_TTY_STATE): Delete. (SERIAL_NOFLUSH_SET_TTY_STATE): Delete. (SERIAL_SETBAUDRATE): Delete. (SERIAL_SETSTOPBITS): Delete. (SERIAL_CAN_ASYNC_P): Delete. (SERIAL_IS_ASYNC_P): Delete. (SERIAL_UN_FDOPEN): Delete. (SERIAL_READCHAR): Delete. (SERIAL_CLOSE): Delete. (SERIAL_FDOPEN): Delete. (SERIAL_OPEN): Delete.	25 years ago
Elena Zannoni	4902674b93	2001-07-13 Elena Zannoni <ezannoni@redhat.com> * remote-e7000.c (fetch_regs_from_dump): If register set is null, generate an internal error. (e7000_fetch_registers): Initialize variable 'wanted'. (e7000_wait): Initialize variable 'wanted_nopc'. (e7000_store_register): Fix sprintf compiler warnings. (sub2_from_pc): Ditto. (e7000_open): Close the descriptor, not the name. (e7000_load): Fix compiler warnings. (sub2_from_pc): Ditto. * Makefile.in (remote-e7000.o): Can now compile with -Werror.	25 years ago
Andrew Cagney	819cc32466	s/typedef serial_t/struct serial */	25 years ago
Christopher Faylor	0b6a968ee6	* gnu-regex.c: Eliminate obsolete check for _MSC_VER. * utils.c (notice_quit): Remove dummy function only used for _MSC_VER. * values.c (unpack_double): Remove obsolete check for _MSC_VER. * defs.h: Ditto. * m32r-rom.c: Ditto. * p-exp.y: Ditto. * ser-e7kpc.c: Ditto. Define WIN32_LEAN_AND_MEAN under _WIN32, for faster compilation. (get_ds_base): Remove _MSC_VER version of this function. * nindy-share/ttyflush.c: Ditto. X * rdi-share/host.h: Ditto. X * ser-go32.c (dos_readchar): Remove call to obsolete function. * remote-sim.c (gdb_os_poll_quit): Ditto. * remote-e7000.c (expect): Remove obsolete #if 0'ed code. * main.c (captured_main): Eliminate special Cygwin checks. * ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include.	25 years ago
Fernando Nasser	67dd5ca691	2001-05-12 Fernando Nasser <fnasser@redhat.com> * remote-e7000.c (e7000_open): Check for bad baud rate. * remote-st.c (st2000_open): Ditto.	25 years ago
Kevin Buettner	39f770628a	Phase 1 of the ptid_t changes.	25 years ago
J.T. Conklin	46c6cdcf5e	* target.h (target_ops): Removed to_core_file_to_sym_file vector function. * corelow.c (core_ops): Updated for above change. * gnu-nat.c (core_ops): Likewise. * inftarg.c (child_ops): Likewise. * monitor.c (monitor_ops): Likewise. * ppc-bdm.c (bdm_ppc_ops): Likewise. * remote-adapt.c (adapt_ops): Likewise. * remote-bug.c (bug_ops): Likewise. * remote-e7000.c (e7000_ops): Likewise. * remote-eb.c (eb_ops): Likewise. * remote-es.c (es1800_ops, es1800_child_ops): Likewise. * remote-mm.c (mm_ops): Likewise. * remote-nindy.c (nindy_ops): Likewise. * remote-nrom.c (nrom_ops): Likewise. * remote-os9k.c (rombug_ops): Likewise. * remote-rdp.c (remote_rdp_ops): Likewise. * remote-sim.c (gdbsim_ops): Likewise. * remote-st.c (st2000_ops): Likewise. * v850ice.c (v850ice_ops): Likewise. * target.c (cleanup_target): Likewise (update_current_target): Likewise. (setup_target_debug): Likewise (debug_to_core_file_to_sym_file): Removed. * corefile.c (core_file_command) [HPUXHPPA]: Removed code that sets symbol file from information obtained from the core file. * corelow.c (core_file_to_sym_file): Removed.	25 years ago
Christopher Faylor	608506ed67	* main.c: Remove windows.h use. (gdbtk_test): Use PATH_MAX for home var calculation. * remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as Win32 in test. * ser-tcp.c: Use modern __CYGWIN__ conditional. * source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test. (openp): Ditto. * symfile.c (symfile_bfd_open): Ditto. * gdbtk/generic/gdbtk.c: Ditto.	25 years ago
Kevin Buettner	b6ba6518e9	Update/correct copyright notices.	25 years ago
Andrew Cagney	4e052eda91	Create new file regcache.h. Update all uses.	25 years ago
Kevin Buettner	e1e9e218c1	Replace calls to abort() with calls to internal_error().	25 years ago
J.T. Conklin	86ddecc5fc	* ppc-bdm.c (#include <signal.h>): Removed. * remote-array.c: Likewise. * remote-bug.c: Likewise. * remote-e7000.c: Likewise. * remote-mips.c: Likewise. * remote-os9k.c: Likewise. * remote-st.c: Likewise. * remote-udi.c: Likewise. * remote-vx29k.c: Likewise. * remote-vx68.c: Likewise. * remote-vx960.c: Likewise. * remote-vxmips.c: Likewise. * remote-vxsparc.c: Likewise.	26 years ago
J.T. Conklin	824670030b	* monitor.c (#include "gdb_wait.h"): Removed. * ocd.c: Likewise. * ppc-bdm.c: Likewise. * remote-adapt.c: Likewise. * remote-array.c: Likewise. * remote-bug.c: Likewise. * remote-e7000.c: Likewise. * remote-eb.c: Likewise. * remote-es.c: Likewise. * remote-mips.c: Likewise. * remote-mm.c: Likewise. * remote-nindy.c: Likewise. * remote-os9k.c: Likewise. * remote-rdi.c: Likewise. * remote-rdp.c: Likewise. * remote-sds.c: Likewise. * remote-sim.c: Likewise. * remote-st.c: Likewise. * remote-udi.c: Likewise. * remote-vx.c: Likewise. * remote-vx29k.c: Likewise. * remote-vx68.c: Likewise. * remote-vx960.c: Likewise. * remote-vxmips.c: Likewise. * remote-vxsparc.c: Likewise. * remote.c: Likewise. * ser-pipe.c: Likewise. * ser-unix.c: Likewise. * Makefile.in: Updated dependencies. -------------------------------------------------------------------	26 years ago
J.T. Conklin	29e5738069	* exec.c (xfer_memory): Add attrib argument. * infptrace.c (child_xfer_memory): Likewise. * monitor.c (monitor_xfer_memory): Likewise. * remote-adapt.c (adapt_xfer_inferior_memory): Likewise. * remote-array.c (array_xfer_memory): Likewise. * remote-bug.c (bug_xfer_memory): Likewise. * remote-e7000.c (e7000_xfer_inferior_memory): Likewise. * remote-eb.c (eb_xfer_inferior_memory): Likewise. * remote-es.c (es1800_xfer_inferior_memory): Likewise. * remote-mips.c (mips_xfer_memory): Likewise. * remote-mm.c (mm_xfer_inferior_memory): Likewise. * remote-nindy.c (nindy_xfer_inferior_memory): Likewise. * remote-os9k.c (rombug_xfer_inferior_memory): Likewise. * remote-rdi.c (arm_rdi_xfer_memory): Likewise. * remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise. * remote-sds.c (sds_xfer_memory): Likewise. * remote-sim.c (gdbsim_xfer_inferior_memory): Likewise. * remote-st.c (st2000_xfer_inferior_memory): Likewise. * remote-udi.c (udi_xfer_inferior_memory): Likewise. * remote-vx.c (vx_xfer_memory): Likewise. * remote.c (remote_xfer_memory): Likewise. * target.c (debug_to_xfer_memory, do_xfer_memory): Likewise. * target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise. * target.h (#include "memattr.h"): Added. (target_ops.to_xfer_memory): Add attrib argument. * wince.c (_initialize_inftarg): Removed call to set_dcache_state. * dcache.h (set_dcache_state): Removed declaration. * dcache.c (set_dcache_state): Removed definition * dcache.c: Update module comment, as dcache is now enabled and disabled with memory region attributes instead of by the global variable "remotecache". Add comment describing the interaction between dcache and memory region attributes. (dcache_xfer_memory): Add comment describing benefits of moving cache writeback to a higher level. (dcache_struct): Removed cache_has_stuff field. This was used to record whether the cache had been accessed in order to invalidate it when it was disabled. However, this is not needed because the cache is write through and the code that enables, disables, and deletes memory regions invalidate the cache. Add comment which suggests that we could be more selective and only invalidate those cache lines containing data from those memory regions. (dcache_invalidate): Updated. (dcache_xfer_memory): Updated. (dcache_alloc): Don't abort() if dcache_enabled_p is clear. (dcache_xfer_memory): Removed code that called do_xfer_memory() to perform a uncached transfer if dcache_enabled_p was clear. This function is now only called if caching is enabled for the memory region. (dcache_info): Always print cache info. * target.c (do_xfer_memory): Add attrib argument. (target_xfer_memory, target_xfer_memory_partial): Break transfer into chunks defined by memory regions, pass region attributes to do_xfer_memory(). * dcache.c (dcache_read_line, dcache_write_line): Likewise. * Makefile.in (SFILES): Add memattr.c. (COMMON_OBS): Add memattr.o. (dcache.o): Add target.h to dependencies. * memattr.c: New file. * memattr.h: Likewise.	26 years ago
Andrew Cagney	55d8016036	* ser-e7kpc.c (e7000pc_setstopbits): New function. (e7000pc_ops): Add e7000pc_setstopbits. * remote-e7000.c (e7000_detach, e7000_resume, e7000_xfer_inferior_memory, e7000_files_info, e7000_files_info, e7000_insert_breakpoint, e7000_remove_breakpoint, e7000_kill): Update function signature to match target vector. * h8300-tdep.c (h8300_command, h8300h_command, h8300s_command): h8500-tdep.c (small_command, big_command, medium_command, compact_command): Update function signature to match add_cmd.	26 years ago
J.T. Conklin	8e1a459b89	* gdbarch.sh, hp-psymtab-read.c, hpread.c, m3-nat.c, mcore-tdep.c, mips-tdep.c, monitor.c, regcache.c, remote-es.c, ser-unix.c, somread.c, tracepoint.c: Fix spelling errors in comments. * gdbarch.c: Regenerate. * gnu-nat.c (S_exception_raise_request): Fix typos and spelling errors in strings. * m3-nat.c (intercept_exec_calls, mach_thread_parse_id): Likewise. * mcore-tdep.c (mcore_analyze_prologue): Likewise. * mips-tdep.c (mips16_next_pc, _initialize_mips_tdep): Likewise. * remote-e7000.c (e7000_start_remote): Likewise. * remote-rdp.c (handle_swi): Likewise. * remote-vx.c (vx_load_command): Likewise. * sh-tdep.c (sh_do_pseudo_register): Likewise. * sol-thread.c (td_err_string): Likewise. * symtab.c (decode_line_2): Likewise. -------------------------------------------------------------------	26 years ago
Kevin Buettner	69dc947abb	Protoization.	26 years ago
J.T. Conklin	8edbea78dc	* dcache.c (dcache_info): Output a cache line's state vector so it lines up under the data vector. * dcache.c (dcache_read_line): New function. (dcache_peek_byte): Use it. (dcache_alloc): Return NULL if write of reclaimed cache line fails. (dcache_peek_byte, dcache_poke_byte): Return failure if dcache_alloc() returns a NULL data block pointer. (dcache_xfer_memory): Don't force writeback unless we were writing. * monitor.c (monitor_expect): Change places where immediate_quit is set to 1 or 0 to increments and decrements respectively. This allows such changes to nest properly. * ocd.c (ocd_start_remote): Likewise. * remote-adapt.c (expect): Likewise. * remote-array.c (expect): Likewise. * remote-eb.c (expect): Likewise. * remote-e7000.c (e7000_start_remote): Likewise. * remote-mips.c (mips_expect_timeout, mips_getstring): Likewise. * remote-nrom.c (expect): Likewise. * remote-os9k.c (expect): Likewise. * remote-sds.c (sds_start_remote): Likewise. * remote-st.c (expect): Likewise. * remote-utils.c (sr_expect): Likewise. * remote.c (remote_start_remote): Likewise. * tracepoint.c (read_actions): Likewise. * remote-mips.c (mips_getstring): Balance changes to immediate_quit.	26 years ago
Elena Zannoni	34e9d9bbe1	2000-07-31 Elena Zannoni <ezannoni@kwikemart.cygnus.com> * sh-tdep.c (sh_push_arguments): Make header match prototype. * remote-e7000.c (e7000_start_remote): Use void , not char as parameter to avoid compiler warning. (fetch_regs_from_dump): Call get_hex() with the correct number of parameters.	26 years ago
Kevin Buettner	fba45db2fa	Protoization.	26 years ago
Elena Zannoni	cc17453a58	2000-07-19 Elena Zannoni <ezannoni@kwikemart.cygnus.com> Multiarch the sh target. * sh-tdep.c: (sh_generic_reg_names, sh_reg_names,sh3_reg_names, sh3e_reg_names, sh_dsp_reg_names, sh3_dsp_reg_names, sh_processor_type_table): Remove. (XMALLOC): Define. (struct frame_extra_info): Define. (sh_register_raw_size, sh_register_virtual_size, sh_register_virtual_type, sh_register_byte, sh_breakpoint_from_pc, sh_frame_saved_pc, sh_skip_prologue, sh_nofp_frame_init_saved_regs, sh_fp_frame_init_saved_regs, sh_extract_struct_value_address, sh_use_struct_convention, sh_store_struct_return, sh_push_arguments, sh_push_return_address, sh_saved_pc_after_call, sh_generic_register_name, sh_sh_register_name, sh_sh3_register_name, sh_sh3e_register_name, sh_sh_dsp_register_name, sh_sh3_dsp_register_name, sh_frame_args_address, sh_frame_locals_address, sh_coerce_float_to_double, sh_default_store_return_value, sh3e_sh4_store_return_value, sh_generic_show_regs, sh3_show_regs,sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs, sh_register_byte, sh_register_raw_size, sh_register_virtual_size, sh_sh3e_register_virtual_type, sh_default_register_virtual_type, sh_gdbarch_init): New functions. (sh_target_architecture_hook, sh_frame_find_saved_regs, sh_show_regs): Delete functions. (sh_frame_chain, sh_find_callers_reg, sh_init_extra_frame_info, sh_pop_frame, sh_extract_return_value): Update * config/sh/tm-sh.h (GDB_MULTI_ARCH): Define to 1. (struct gdbarch_tdep): Define. Remove all unnecessary defines. * remote-e7000.c ({PR,GBR,SR,MACL,VBR,MACH}_REGNUM): Define to -1, for h8300 case. (want_sh,want_nopc_sh,want_nopc_sh3): Make nomenclature consistent. (e7000_fetch_registers): Remove ifdef GDB_TARGET_IS_SH, use runtime check instead. (e7000_wait): Ditto. * sh3-rom.c (sh3_supply_register): Use gdbarch_tdep to get the SSR and SPC register numbers. (sh3_regnames, sh3e_regnames): Don't specify a size. * config/h8300/tm-h8300.h: Add comment.	26 years ago
Kevin Buettner	a14ed312fd	PARAMS removal.	26 years ago
Andrew Cagney	5c65bbb629	Cleanup bfd_close() cleanups.	26 years ago
Andrew Cagney	03f2053f96	Replace ../include/wait.h with gdb_wait.h.	27 years ago
Jason Molenda	c5aa993b1f	import gdb-1999-07-07 post reformat	27 years ago
Stan Shebs	7a292a7adf	import gdb-19990422 snapshot	27 years ago
Stan Shebs	c906108c21	Initial creation of sourceware repository	27 years ago
Stan Shebs	071ea11e85	Initial creation of sourceware repository	27 years ago
David Taylor	4ef1f46773	hp merge changes -- too numerous to mention here; see ChangeLog and ChangeLog-gdbtk for details.	28 years ago
Andrew Cagney	aaa3c096db	CARP: Re-do TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN, TARGET_ARCHITECTURE, TARGET_ARCHITECTURE_AUTO, TARGET_BYTE_ORDER_SELECTABLE_P, TARGET_BYTE_ORDER so that they can all be overriden. Document. Convert mn10300 and PPC targets.	28 years ago
Andrew Cagney	d0aba53f38	New commands ``set architecture'', ``show architecture'' and ``info architecture''. Update SH target to use new target_architecture_hook.	29 years ago
Dawn Perchik	16a43bf443	* defs.h: Fix cntl-C to read from the Windows message queue. Add prototypes for make_final_cleanup (and the other cleanup routines. * remote-e7000.c: Fix sync code to timeout if unable to sync. Change sync code to report status while trying to sync-up with hardware. Add debugging output and document. * ser-e7kpc.c: Swap order of len & offset to match implementation. Add debugging output and document. * serial.c: Add debugging output. * top.c: Add call to do_final_cleanups. Remove conditionals preventing Win32 from getting SIGQUIT. * utils.c: (_cleanup): Modify cleanup routines to accept a cleanup chain as a parameter. Extract this generic code from the cleanup routines into separate funtions (_my_cleanup). Keep old functionality by passing "cleanup_chain" to the new funtions. Define the cleanup chain "final_cleanup_chain" to be a cleanup chain which will be executed only when gdb exits. Add functions (_final_cleanup) to match the original (_cleanup) functions. (pollquit, quit, notice_quit): Fix to read cntl-C from the Windows message queue.	30 years ago
Fred Fish	b607efe714	See gdb ChangeLog entry with header: Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com> for a rather huge set of changes. I was going to put them here, but it made cvs dump core. :-(	30 years ago
Mark Alexander	97fd185a48	* remote-e7000.c (e7000_stop): New function. PR 9935	30 years ago
Dawn Perchik	cb1709aeac	* remote-e7000.c,remote.c,target.h,top.c: Add set option "remote_timeout" for setting remote_timeout. Add set option "use_hard_breakpoints" for setting hardware .vs. memory breakpoints.	30 years ago
Dawn Perchik	56a4bf5339	* remote-e7000.c (e7000_parse_device): New function. Add option "tcp_remote" to target command if using tcp to connect to a remote host which is then connected via serial port to the e7000 (for exampole, a port master). (e7000_open): Change to call e7000_parse_device.	30 years ago
Martin Hunt	ebea03669c	* remote-e7000.c (e7000_read_inferior_memory_large): New function. (e7000_xfer_inferior_memory): Call it. PR 9754	30 years ago
Stan Shebs	72158e714e	* symfile.c (report_transfer_performance): New function. (generic_load): Call it to report transfer rate. * remote-e7000.c (e7000_load): Ditto. PR 9353	30 years ago
Stu Grossman	b5eccf7482	* remote-e7000.c (e7000_load): New routine to download via the network. * (e7000_wait): Don't backup PC when we hit a breakpoint. Apparantly new sh2 pods get this right... * (e7000_ops): Add call to e7000_load.	31 years ago
Stu Grossman	0fe1522ad0	* breakpoint.c (remove_breakpoint): Change error to warning so that hardware watchpoint removal problems won't leave breakpoint traps in the target. * configure configure.in: Make --enable-gdbtk be the default. * remote-e7000.c (e7000_insert_breakpoint, e7000_remove_breakpoint): Use e7000 based breakpoints, not memory breakpoints. * (e7000_wait): Adjust PC back by two when we see a breakpoint to compensate for e7000 maladjustment. * sparcl-tdep.c (sparclite_check_watch_resources): Fix logic bug which prevented hardware watchpoints from working.	31 years ago
J.T. Conklin	2b57629364	* configure.in: Check for working mmap, ansi headers, string.h, strings.h, and memory.h. * configure: Regenerated. * gdb_stat.h: New file, "portable" <sys/stat.h>. * gdb_string.h: New file, "portable" <string.h>. * altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c, convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c, gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c, i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c, mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c, rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c, symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c, ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h" instead of <sys/stat.h>. * alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c, ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c, core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c, dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c, exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c, fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c, inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c, m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c, monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c, printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c, remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c, remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c, remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c, remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c, remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c, solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c, symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c, valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include "gdb_string.h" instead of <string.h>. * gdbtk.c: Likewise. * config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h, sparc/xm-sun4os4.h (HAVE_MMAP): Removed. * config/xm-lynx.h, config/i386/xm-ptx.h, config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h, config/mips/xm-irix3.h, config/mips/xm-mips.h, config/mips/xm-news-mips.h, config/mips/xm-riscos.h, config/pa/hppah.h, config/rs6000/xm-rs6000.h, config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h, config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h, config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed. * config/mips/xm-irix3.h, config/mips/xm-mips.h, config/pa/xm-hppah.h (memcpy, memset): Removed declarations.	31 years ago
Steve Chamberlain	edd01519b9	Fri Feb 4 15:53:18 1994 Steve Chamberlain (sac@cygnus.com) * h8500-tdep.c (saved_pc_after_call): The size of the pc is memory model dependent. (segmented_command, unsegmented_command, _initialize_h8500_tdep): New commands to change memory model. * remote-7000.c (initialize_remote_e7000): Change name of snoop command. * remote-hms.c (hms_load): Remove breakpoints when loaded. (hms_wait): Use new status structure (hms_open): Push the target here. (hms_before_main_loop): Not here. (supply_val, hms_fetch_register, hms_store_register): Cope with H8/500 names too. * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print all registers in a compact way.	33 years ago
Steve Chamberlain	863099f41e	* remote-e7000.c: New file to cope with the Hitachi E7000 ICE. * remote-utils.c, remote-utils.h (gr_load_image): New function to download to target. * h8300-tdep.c, h8500-tdep.c, remote-z8k.c, sh-tdep.c z8k-tdep.c (sim_load): delete. * remote-sim.c (sim_load): Use gr_load_image. * config/sh/sh.mt: Add remote-e7000	33 years ago
Steve Chamberlain	cdf73c5c3b	Initial revision	33 years ago
Jim Kingdon	a77d35b0e5	new file for delta 68	33 years ago
nobody	3a69b3aca6	This commit was manufactured by cvs2svn to create branch 'binutils'. Cherrypick from master 1991-04-04 18:19:53 UTC K. Richard Pixley <rich@cygnus> 'Initial revision': gas/COPYING gas/ChangeLog gas/Makefile.in gas/README gas/app.c gas/as.c gas/as.h gas/atof-generic.c gas/bignum-copy.c gas/bignum.h gas/cond.c gas/config/atof-ieee.c gas/config/atof-vax.c gas/config/obj-aout.c gas/config/obj-aout.h gas/config/obj-bout.c gas/config/obj-bout.h gas/config/obj-coff.c gas/config/obj-coff.h gas/config/tc-a29k.c gas/config/tc-a29k.h gas/config/tc-generic.c gas/config/tc-generic.h gas/config/tc-i386.c gas/config/tc-i386.h gas/config/tc-i860.c gas/config/tc-i860.h gas/config/tc-i960.c gas/config/tc-i960.h gas/config/tc-m68851.h gas/config/tc-m68k.c gas/config/tc-m68k.h gas/config/tc-ns32k.c gas/config/tc-ns32k.h gas/config/tc-sparc.c gas/config/tc-sparc.h gas/config/tc-vax.c gas/config/tc-vax.h gas/config/te-generic.h gas/config/te-ic960.h gas/config/te-sun3.h gas/config/vax-inst.h gas/configure gas/configure.in gas/debug.c gas/expr.c gas/expr.h gas/flonum-copy.c gas/flonum-mult.c gas/flonum.h gas/frags.c gas/frags.h gas/hash.c gas/hash.h gas/input-file.c gas/input-file.h gas/input-scrub.c gas/messages.c gas/obj.h gas/output-file.c gas/output-file.h gas/read.c gas/read.h gas/struc-symbol.h gas/subsegs.c gas/subsegs.h gas/symbols.c gas/symbols.h gas/tc.h gas/write.c gas/write.h ld/ld.h ld/ldexp.c ld/ldfile.c ld/ldfile.h ld/ldlang.h ld/ldlex.h ld/ldmain.h ld/ldmisc.h ld/ldwrite.h Cherrypick from master 1991-03-21 21:29:06 UTC David Henkel-Wallace <gumby@cygnus> 'Initial revision': ld/ldexp.h ld/ldgram.y ld/ldlang.c ld/ldlex.l ld/ldmain.c ld/ldmisc.c ld/ldwrite.c Cherrypick from master 1991-01-17 15:34:55 UTC Roland Pesch <pesch@cygnus> 'Initial revision': gas/doc/as.texinfo	36 years ago
K. Richard Pixley	fecd2382e7	Initial revision	36 years ago

47 Commits (fc697c14bd75d9b6fa860d17afb0e1cc98dd4e66)