binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Sam James	9e11e7460d	Finalized intl-update patches (deux) Doing this on behalf of Arsen as obvious. * gdb: Regenerate. * gdbserver: Regenerate. * gprofng: Regenerate.	3 years ago
Lancelot Six	f74dc26792	gdb/gdbsupport/gdbserver: Require c++17 This patch proposes to require a C++17 compiler to build gdb / gdbsupport / gdbserver. Before this patch, GDB required a C++11 compiler. The general policy regarding bumping C++ language requirement in GDB (as stated in [1]) is: Our general policy is to wait until the oldest compiler that supports C++NN is at least 3 years old. Rationale: We want to ensure reasonably widespread compiler availability, to lower barrier of entry to GDB contributions, and to make it easy for users to easily build new GDB on currently supported stable distributions themselves. 3 years should be sufficient for latest stable releases of distributions to include a compiler for the standard, and/or for new compilers to appear as easily installable optional packages. Requiring everyone to build a compiler first before building GDB, which would happen if we required a too-new compiler, would cause too much inconvenience. See the policy proposal and discussion [here](https://sourceware.org/ml/gdb-patches/2016-10/msg00616.html). The first GCC release which with full C++17 support is GCC-9[2], released in 2019[3], which is over 4 years ago. Clang has had C++17 support since Clang-5[4] released in 2018[5]. A discussions with many distros showed that a C++17-able compiler is always available, meaning that this no hard requirement preventing us to require it going forward. [1] https://sourceware.org/gdb/wiki/Internals%20GDB-C-Coding-Standards#When_is_GDB_going_to_start_requiring_C.2B-.2B-NN_.3F [2] https://gcc.gnu.org/projects/cxx-status.html#cxx17 [3] https://gcc.gnu.org/gcc-9/ [4] https://clang.llvm.org/cxx_status.html [5] https://releases.llvm.org/ Change-Id: Id596f5db17ea346e8a978668825787b3a9a443fd Reviewed-By: Eli Zaretskii <eliz@gnu.org> Approved-By: Tom Tromey <tom@tromey.com> Approved-By: Pedro Alves <pedro@palves.net>	3 years ago
Simon Marchi	8b35ed1feb	gdbsupport: move libxxhash configure check to gdbsupport The following patch moves the fast_hash function, which uses libxxhash, to gdbsupport. Move the libxxhash configure check to gdbsupport (and transitively to gdbserver). Change-Id: I242499e50c8cd6fe9f51e6e92dc53a1b3daaa96e Approved-By: Andrew Burgess <aburgess@redhat.com>	4 years ago
Tom Tromey	0b03c6f03d	Fix build on rhES5 The rhES5 build failed due to an upstream import a while back. The bug here is that, while the 'personality' function exists, ADDR_NO_RANDOMIZE is only defined in <linux/personality.h>, not <sys/personality.h>. However, <linux/personality.h> does not declare the 'personality' function, and <sys/personality.h> and <linux/personality.h> cannot both be included. This patch restores one of the removed configure checks and updates the code to check it. We had this as a local patch at AdaCore, because it seemed like there was no interest upstream. However, now it turns out that this fixes PR build/28555, so I'm sending it now.	5 years ago
Simon Marchi	6c130ba387	gdbserver: re-generate configure I get some diffs when running autoconf in gdbserver, probably leftovers from commit `5dfe4bfcb9` ("Fix format_pieces selftest on Windows"). Re-generate configure in that directory. Change-Id: Icdc9906af95fbaf1047a579914b2983f8ec5db08	5 years ago
Simon Marchi	f4931779e4	gdbsupport/common.m4: check for sigtimedwait The next patch will make the use of sigtimedwait conditional to whether the platform provides it. Start by adding a configure check for it. gdbsupport/ChangeLog: * common.m4 (GDB_AC_COMMON): Check for sigtimedwait. * config.in, configure: Re-generate. gdb/ChangeLog: * config.in, configure: Re-generate. gdbserver/ChangeLog: * config.in, configure: Re-generate. Change-Id: Ic7613fe14521b966b4d991bbcd0933ab14629c05	5 years ago
Pedro Alves	4655f8509f	Don't run personality syscall at configure time; don't check it at all Currently, in order to tell whether support for disabling address space randomization on Linux is available, GDB checks if the personality syscall works, at configure time. I.e., it does a run test, instead of a compile/link test: AC_RUN_IFELSE([PERSONALITY_TEST], [have_personality=true], [have_personality=false], This is a bit bogus, because the machine the build is done on may not (and is when you consider distro gdbs) be the machine that eventually runs gdb. It would be better if this were a compile/link test instead, and then at runtime, GDB coped with the personality syscall failing. Actually, GDB already copes. One environment where this is problematic is building GDB in a Docker container -- by default, Docker runs the container with seccomp, with a profile that disables the personality syscall. You can tell Docker to use a less restricted seccomp profile, but I think we should just fix it in GDB. "man 2 personality" says: This system call first appeared in Linux 1.1.20 (and thus first in a stable kernel release with Linux 1.2.0); library support was added in glibc 2.3. ... ADDR_NO_RANDOMIZE (since Linux 2.6.12) With this flag set, disable address-space-layout randomization. glibc 2.3 was released in 2002. Linux 2.6.12 was released in 2005. The original patch that added the configure checks was submitted in 2008. The first version of the patch that was submitted to the list called personality from common code: https://sourceware.org/pipermail/gdb-patches/2008-June/058204.html and then was moved to Linux-specific code: https://sourceware.org/pipermail/gdb-patches/2008-June/058209.html Since HAVE_PERSONALITY is only checked in Linux code, and ADDR_NO_RANDOMIZE exists for over 15 years, I propose just completely removing the configure checks. If for some odd reason, some remotely modern system still needs a configure check, then we can revert this commit but drop the AC_RUN_IFELSE in favor of always doing the AC_LINK_IFELSE cross-compile fallback. gdb/ChangeLog: * linux-nat.c (linux_nat_target::supports_disable_randomization): Remove references to HAVE_PERSONALITY. * nat/linux-personality.c: Remove references to HAVE_PERSONALITY. (maybe_disable_address_space_randomization) (~maybe_disable_address_space_randomizatio): Remove references to HAVE_PERSONALITY. * config.in, configure: Regenerate. gdbserver/ChangeLog: * linux-low.cc: (linux_process_target::supports_disable_randomization): Remove reference to HAVE_PERSONALITY. * config.in, configure: Regenerate. gdbsupport/ChangeLog: * common.m4 (personality test): Remove.	5 years ago
Simon Marchi	92a048fd3b	gdbserver: re-generate configure I get this diff when I re-generate the configure script in gdbserver, probably leftovers from `e911c6663b` ("Require kinfo_get_file and kinfo_get_vmmap for FreeBSD hosts"). gdbserver/ChangeLog: * config.in: Re-generate. * configure: Re-generate. Change-Id: Id19a72ea9f3e7c7b4fdb0f319c9c0bbad0e39aeb	6 years ago
Rainer Orth	c8693053f8	Unify Solaris procfs and largefile handling GDB currently doesn't build on 32-bit Solaris: * On Solaris 11.4/x86: In file included from /usr/include/sys/procfs.h:26, from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24: /usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment" #error "Cannot use procfs in the large file compilation environment" ^~~~~ * On Solaris 11.3/x86 there are several more instances of this. The interaction between procfs and large-file support historically has been a royal mess on Solaris: * There are two versions of the procfs interface: The old ioctl-based /proc, deprecated and not used any longer in either gdb or binutils. The `new' (introduced in Solaris 2.6, 1997) structured /proc. * There are two headers one can possibly include: <procfs.h> which only provides the structured /proc, definining _STRUCTURED_PROC=1 and then including ... <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based /proc, but provides structured /proc if _STRUCTURED_PROC == 1. * procfs and the large-file environment didn't go well together: Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit compilations when the large-file environment was active (_FILE_OFFSET_BITS == 64). In both Solaris 11.4 and Illumos, this restriction was lifted for structured /proc. So one has to be careful always to define _STRUCTURED_PROC=1 when testing for or using <sys/procfs.h> on Solaris. As the errors above show, this isn't always the case in binutils-gdb right now. Also one may need to disable large-file support for 32-bit compilations on Solaris. config/largefile.m4 meant to do this by wrapping the AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because it neglects the _STRUCTURED_PROC part. To make things even worse, since GCC 9 g++ predefines _FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to enable large-file support, this has no effect, breaking the gdb build. This patch addresses all this as follows: * All tests for the <sys/procfs.h> header are made with _STRUCTURED_PROC=1, the definition going into the various config.h files instead of having to make them (and sometimes failing) in the affected sources. * To cope with the g++ predefine of _FILE_OFFSET_BITS=64, -U_FILE_OFFSET_BITS is added to various _CPPFLAGS variables. It had been far easier to have just #undef _FILE_OFFSET_BITS in config.h, but unfortunately such a construct in config.in is commented by config.status irrespective of indentation and whitespace if large-file support is disabled. I found no way around this and putting the #undef in several global headers for bfd, binutils, ld, and gdb seemed way more invasive. Last, the applicability check in largefile.m4 was modified only to disable largefile support if really needed. To do so, it checks if <sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it doesn't, the disabling only happens if gdb exists in-tree and isn't disabled, otherwise (building binutils from a tarball), there's no conflict. What initially confused me was the check for $plugins here, which originally caused the disabling not to take place. Since AC_PLUGINGS does enable plugin support if <dlfcn.h> exists (which it does on Solaris), the disabling never happened. I could find no explanation why the linker plugin needs large-file support but thought it would be enough if gld and GCC's lto-plugin agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not enough: lto-plugin uses the simple-object interface from libiberty, which includes off_t arguments. So to fully disable large-file support would mean also disabling it in libiberty and its users: gcc and libstdc++-v3. This seems highly undesirable, so I decided to disable the linker plugin instead if large-file support won't work. The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to predefined _FILE_OFFSET_BITS=64). Also regtested on amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4), x86_64-pc-linux-gnu and i686-pc-linux-gnu. config: * largefile.m4 (ACX_LARGEFILE) <sparc--solaris\|i?86--solaris>: Check for <sys/procfs.h> incompatilibity with large-file support on Solaris. Only disable large-file support and perhaps plugins if needed. Set, substitute LARGEFILE_CPPFLAGS if so. bfd: * bfd.m4 (BFD_SYS_PROCFS_H): New macro. (BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H. Don't define _STRUCTURED_PROC. (BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise. * elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define. * configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * configure, config.in: Regenerate. * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. binutils: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gas: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gdb: * proc-api.c (_STRUCTURED_PROC): Don't define. * proc-events.c: Likewise. * proc-flags.c: Likewise. * proc-why.c: Likewise. * procfs.c: Likewise. * Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * configure, config.in: Regenerate. gdbserver: * configure, config.in: Regenerate. gdbsupport: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * Makefile.in: Regenerate. * configure, config.in: Regenerate. gnulib: * configure.ac: Run ACX_LARGEFILE before gl_EARLY. * configure: Regenerate. gprof: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate. ld: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate.	6 years ago
Eli Zaretskii	05a6b8c28b	Don't unnecessarily redefine 'socklen_t' type in MinGW builds. The original configure-time tests in gdb/ and gdbserver/ failed to detect that 'socklen_t' is defined in MinGW headers because the test program included only sys/socket.h, which is absent in MinGW system headers. However on MS-Windows this data type is declared in another header, ws2tcpip.h. The modified test programs try using ws2tcpip.h if sys/socket.h is unavailable. Thanks to Joel Brobecker who helped me regenerate the configure scripts and the config.in files. gdb/ChangeLog: 2020-07-26 Eli Zaretskii <eliz@gnu.org> * configure.ac (AC_CHECK_HEADERS): Check for sys/socket.h and ws2tcpip.h. When checking whether socklen_t type is defined, use ws2tcpip.h if it is available and sys/socket.h isn't. * configure: Regenerate. * config.in: Regenerate. gdbserver/ChangeLog: 2020-07-26 Eli Zaretskii <eliz@gnu.org> * configure.ac (AC_CHECK_HEADERS): Add ws2tcpip.h. When checking whether socklen_t type is defined, use ws2tcpip.h if it is available and sys/socket.h isn't. * configure: Regenerate. * config.in: Regenerate.	6 years ago
Simon Marchi	1eb3991427	gdb, gdbserver: remove configure check for fs_base/gs_base in user_regs_struct I recently stumbled on this code mentioning Linux kernel 2.6.25, and thought it could be time for some spring cleaning (newer GDBs probably don't need to supports 12-year old kernels). I then found that the "legacy" case is probably broken anyway, which gives an even better motivation for its removal. In short, this patch removes the configure checks that check if user_regs_struct contains the fs_base/gs_base fields and adjusts all uses of the HAVE_STRUCT_USER_REGS_STRUCT_{FS,GS}_BASE macros. The longer explanation/rationale follows. Apparently, Linux kernels since 2.6.25 (that's from 2008) have been reliably providing fs_base and gs_base as part of user_regs_struct. Commit df5d438e33d7 in the Linux kernel [1] seems related. This means that we can get these values by reading registers with PTRACE_GETREGS. Previously, these values were obtained using a separate PTRACE_ARCH_PRCTL ptrace call. First, I'm not even sure the configure check was really right in the first place. The user_regs_struct used by GDB comes from /usr/include/x86_64-linux-gnu/sys/user.h (or equivalent on other distros) and is provided by glibc. glibc has had the fs_base/gs_base fields in there for a very long time, at least since this commit from 2001 [2]. The Linux kernel also has its version of user_regs_struct, which I think was exported to user-space at some point. It included the fs_base/gs_base fields since at least this 2002 commit [3]. In any case, my conclusion is that the fields were there long before the aforementioned Linux kernel commit. The kernel commit didn't add these fields, it only made sure that they have reliable values when obtained with PTRACE_GETREGS. So, checking for the presence of the fs_base/gs_base fields in struct user_regs_struct doesn't sound like a good way of knowing if we can reliably get the fs_base/gs_base values from PTRACE_GETREGS. My guess is that if we were using that strategy on a < 2.6.25 kernel, things would not work correctly: - configure would find that the user_regs_struct has the fs_base/gs_base fields (which are probided by glibc anyway) - we would be reading the fs_base/gs_base values using PTRACE_GETREGS, for which the kernel would provide unreliable values Second, I have tried to see how things worked by forcing GDB to not use fs_base/gs_base from PTRACE_GETREGS (forcing it to use the "legacy" code, by configuring with ac_cv_member_struct_user_regs_struct_gs_base=no ac_cv_member_struct_user_regs_struct_fs_base=no Doing so breaks writing registers back to the inferior. For example, calling an inferior functions gives an internal error: (gdb) p malloc(10) /home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408: internal-error: invalid i387 regnum 152 The relevant last frames where this error happens are: #8 0x0000563123d262fc in internal_error (file=0x563123e93fd8 "/home/smarchi/src/binutils-gdb/gdb/i387-tdep.c", line=1408, fmt=0x563123e94482 "invalid i387 regnum %d") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:55 #9 0x0000563123047d0d in i387_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408 #10 0x0000563122c69e8a in amd64_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/amd64-tdep.c:3448 #11 0x0000563122c5e94c in amd64_linux_nat_target::store_registers (this=0x56312515fd10 <the_amd64_linux_nat_target>, regcache=0x5631269453f0, regnum=152) at /home/smarchi/src/binutils-gdb/gdb/amd64-linux-nat.c:335 #12 0x00005631234c8c80 in target_store_registers (regcache=0x5631269453f0, regno=152) at /home/smarchi/src/binutils-gdb/gdb/target.c:3485 #13 0x00005631232e8df7 in regcache::raw_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:765 #14 0x00005631232e8f0c in regcache::cooked_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:778 #15 0x00005631232e75ec in regcache::restore (this=0x5631269453f0, src=0x5631275eb130) at /home/smarchi/src/binutils-gdb/gdb/regcache.c:283 #16 0x0000563123083fc4 in infcall_suspend_state::restore (this=0x5631273ed930, gdbarch=0x56312718cf20, tp=0x5631270bca90, regcache=0x5631269453f0) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9103 #17 0x0000563123081eed in restore_infcall_suspend_state (inf_state=0x5631273ed930) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9151 The problem seems to be that amd64_linux_nat_target::store_registers calls amd64_native_gregset_supplies_p to know whether gregset provides fs_base. When !HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE, amd64_native_gregset_supplies_p returns false. store_registers therefore assumes that it must be an "xstate" register. This is of course wrong, and that leads to the failed assertion when i387_collect_xsave doesn't recognize the register. amd64_linux_nat_target::store_registers could probably be fixed to handle this case, but I don't think it's worth it, given that it would only be to support very old kernels. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5d438e33d7fc914ba9b6e0d6b019a8966c5fcc [2] https://sourceware.org/git/?p=glibc.git;a=commit;h=c9cf6ddeebb7bb [3] https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=88e4bc32686ebd0b1111a94f93eba2d334241f68 gdb/ChangeLog: * configure.ac: Remove check for fs_base/gs_base in user_regs_struct. * configure: Re-generate. * config.in: Re-generate. * amd64-nat.c (amd64_native_gregset_reg_offset): Adjust. * amd64-linux-nat.c (amd64_linux_nat_target::fetch_registers, amd64_linux_nat_target::store_registers, ps_get_thread_area, ): Adjust. gdbserver/ChangeLog: * configure.ac: Remove check for fs_base/gs_base in user_regs_struct. * configure: Re-generate. * config.in: Re-generate. * linux-x86-low.cc (x86_64_regmap, x86_fill_gregset, x86_store_gregset): Adjust.	6 years ago
Tom Tromey	8ae8e19796	Move event-loop configury to common.m4 gdb_select.h and the event loop require some configure checks, so this moves the needed checks to common.m4 and updates the configure scripts. gdb/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Remove checks that are now in GDB_AC_COMMON. gdbserver/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * configure: Rebuild. * config.in: Rebuild. gdbsupport/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * config.in, configure: Rebuild. * common.m4 (GDB_AC_COMMON): Check for poll.h, sys/poll.h, sys/select.h, and poll.	6 years ago
Simon Marchi	c884cc4619	gdb: remove HAVE_DECL_PTRACE I stumbled on this snippet in nat/gdb_ptrace.h: /* Some systems, in particular DEC OSF/1, Digital Unix, Compaq Tru64 or whatever it's called these days, don't provide a prototype for ptrace. Provide one to silence compiler warnings. / #ifndef HAVE_DECL_PTRACE extern PTRACE_TYPE_RET ptrace(); #endif I believe this is unnecessary today and should be removed. First, the comment only mentions OSes we don't support (and to be honest, I had never even heard of). But most importantly, in C++, a declaration with empty parenthesis declares a function that accepts no arguments, unlike in C. So if this declaration was really used, GDB wouldn't build, since all ptrace call sites pass some arguments. Since we haven't heard anything about this causing some build failures since we have transitioned to C++, I conclude that it's not used. This patch removes it as well as the corresponding configure check. gdb/ChangeLog: ptrace.m4: Don't check for ptrace declaration. * config.in: Re-generate. * configure: Re-generate. * nat/gdb_ptrace.h: Don't declare ptrace if HAVE_DECL_PTRACE is not defined. gdbserver/ChangeLog: * config.in: Re-generate. * configure: Re-generate. gdbsupport/ChangeLog: * config.in: Re-generate. * configure: Re-generate.	6 years ago
Tom Tromey	9a665d6226	Fix gdbserver build when intl already built gdbserver uses gdb's alloc.c, and this in turn can include headers from intl via gdbsupport/gdb_locale.h. This can cause build failures in some situations, for example if you build gdb and gdbserver on mingw. This patch restores the gdbsupport dependency on intl, and changes gdbserver to use ZW_GNU_GETTEXT_SISTER_DIR. This fixes this build problem. ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def (gdbsupport): Depend on intl. gdbserver/ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * config.in, configure: Rebuild. * configure.ac: Call ZW_GNU_GETTEXT_SISTER_DIR. * acinclude.m4: Include gettext-sister.m4. * Makefile.in (top_builddir, INTL, INTL_DEPS, INTL_CFLAGS): New variables. (INCLUDE_CFLAGS): Add INTL_CFLAGS. (gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Use INTL_DEPS, INTL.	7 years ago
Tom Tromey	919adfe840	Move gdbserver to top level This patch moves gdbserver to the top level. This patch is as close to a pure move as possible -- gdbserver still builds its own variant of gnulib and gdbsupport. Changing this will be done in a separate patch. [v2] Note that, per Simon's review comment, this patch changes the tree so that gdbserver is not built for or1k or score. This makes sense, because there is apparently not actually a gdbserver port here. [v3] This version of the patch also splits out some configury into a new file, gdbserver/configure.host, so that the top-level configure script can simply rely on it in order to decide whether gdbserver should be built. [v4] This version adds documentation and removes some unnecessary top-level dependencies. [v5] Update docs to mention "make all-gdbserver" and change how top-level configure decides whether to build gdbserver, switching to a single, shared script. Tested by the buildbot. ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> Pedro Alves <palves@redhat.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver. * gdbserver: New directory, moved from gdb/gdbserver. * configure.ac (host_tools): Add gdbserver. Only build gdbserver on certain systems. * Makefile.in, configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gdbserver. * MAINTAINERS: Add gdbserver. gdb/ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> * README: Update gdbserver documentation. * gdbserver: Move to top level. * configure.tgt (build_gdbserver): Remove. * configure.ac: Remove --enable-gdbserver. * configure: Rebuild. * Makefile.in (distclean): Don't mention gdbserver. Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e	7 years ago
Tom Tromey	05ea2a0510	Move many configure checks to common.m4 This moves many needed configure checks from gdb and gdbserver into common.m4. This helps gdbsupport, nat, and target be self-contained. The result is a bit spaghetti-ish, because gdbsupport uses another m4 file from gdb/. The resulting code is somewhat non-obvious. However, these problems already exist, so it's not really that much worse than what is already done. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Move many checks to ../gdbsupport/common.m4. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Remove any checks that were added to common.m4. * acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and lib-link.m4. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * configure, Makefile.in, aclocal.m4, common.m4, config.in: Rebuild. * common.m4 (GDB_AC_COMMON): Move many checks from gdb/configure.ac. * acinclude.m4: Include bfd.m4, ptrace.m4. Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8	7 years ago
Christian Biesinger	ab7d13f070	Replace the remaining uses of strerror with safe_strerror To do that, this patch makes IPA compile safe-strerror as well. Because it doesn't use Gnulib, it calls the Glibc version of strerror_r directly. Consequently this patch also removes the configure checks for strerror. gdb/ChangeLog: 2019-12-10 Christian Biesinger <cbiesinger@google.com> * config.in: Regenerate. * configure: Regenerate. * gdbsupport/agent.c (gdb_connect_sync_socket): Call safe_strerror instead of strerror. * gdbsupport/common.m4: Don't check for strerror. * gdbsupport/safe-strerror.c: Support both the glibc version of strerror_r and the XSI version. gdb/gdbserver/ChangeLog: 2019-12-10 Christian Biesinger <cbiesinger@google.com> * Makefile.in: Add safe-strerror.c to gdbreplay and IPA, and change UNDO_GNULIB_CFLAGS to undo strerror_r instead of strerror. * config.in: Regenerate. * configure: Regenerate. * configure.ac: Don't check for strerror. * linux-i386-ipa.c (initialize_fast_tracepoint_trampoline_buffer): Call safe_strerror instead of strerror. * server.h (strerror): Remove this now-unnecessary declaration. * tracepoint.c (init_named_socket): Call safe_strerror instead of strerror. (gdb_agent_helper_thread): Likewise. * utils.c (perror_with_name): Likewise. Change-Id: I74848f072dcde75cb55c435ef9398dc8f958cd73	7 years ago
Tom Tromey	4da8c3a8a5	Set names of worker threads This adds some configury so that gdb can set the names of worker threads. This makes them show up more nicely when debugging gdb itself. 2019-11-26 Tom Tromey <tom@tromey.com> * gdbsupport/thread-pool.c (thread_pool::set_thread_count): Set name of worker thread. * gdbsupport/common.m4 (GDB_AC_COMMON): Check for pthread_setname_np. * configure, config.in: Rebuild. gdb/gdbserver/ChangeLog 2019-11-26 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. Change-Id: I60473d65ae9ae14d8c56ddde39684240c16aaf35	7 years ago
Tom Tromey	21987b9c06	Add RAII class for blocking gdb signals This adds configury support and an RAII class that can be used to temporarily block signals that are used by gdb. (This class is not used in this patch, but it split out for easier review.) The idea of this patch is that these signals should only be delivered to the main thread. So, when creating a background thread, they are temporarily blocked; the blocked state is inherited by the new thread. The sigprocmask man page says: The use of sigprocmask() is unspecified in a multithreaded process; see pthread_sigmask(3). This patch changes gdb to use pthread_sigmask when appropriate, by introducing a convenience define. I've updated gdbserver as well, because I had to touch gdbsupport, and because the threading patches will make it link against the thread library. I chose not to touch the NTO code, because I don't know anything about that platform and because I cannot test it. Finally, this modifies an existing spot in the Guile layer to use the new facility. gdb/ChangeLog 2019-11-26 Tom Tromey <tom@tromey.com> * gdbsupport/signals-state-save-restore.c (original_signal_mask): Remove comment. (save_original_signals_state, restore_original_signals_state): Use gdb_sigmask. * linux-nat.c (block_child_signals, restore_child_signals_mask) (_initialize_linux_nat): Use gdb_sigmask. * guile/guile.c (_initialize_guile): Use block_signals. * Makefile.in (HFILES_NO_SRCDIR): Add gdb-sigmask.h. * gdbsupport/gdb-sigmask.h: New file. * event-top.c (async_sigtstp_handler): Use gdb_sigmask. * cp-support.c (gdb_demangle): Use gdb_sigmask. * gdbsupport/common.m4 (GDB_AC_COMMON): Check for pthread_sigmask. * configure, config.in: Rebuild. * gdbsupport/block-signals.h: New file. gdb/gdbserver/ChangeLog 2019-11-26 Tom Tromey <tom@tromey.com> * remote-utils.c (block_unblock_async_io): Use gdb_sigmask. * linux-low.c (linux_wait_for_event_filtered, linux_async): Use gdb_sigmask. * configure, config.in: Rebuild. Change-Id: If3f37dc57dd859c226e9e4d79458a0514746e8c6	7 years ago
Tom Tromey	5e03027845	Add configure check for std::thread This adds a configure check for std::thread. This is needed because std::thread is not available on some systems, like some versions of mingw and DJGPP. This also adds configury to make sure that a threaded gdb links against the correct threading library (-lpthread or the like), and passes the right flags (e.g., -pthread) to the compilations. Note that this also links gdbserver against the thread library. This is not strictly necessary at this point in the series, but a later patch will change gdbsupport to use pthread_sigmask, at which point this will be needed. gdb/ChangeLog 2019-11-26 Tom Tromey <tom@tromey.com> * acinclude.m4: Include ax_pthread.m4. * Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables. (INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS. (CLIBS): Use PTHREAD_LIBS. (aclocal_m4_deps): Add ax_pthread.m4. * config.in, configure: Rebuild. * gdbsupport/common.m4 (GDB_AC_COMMON): Check for std::thread. gdb/gdbserver/ChangeLog 2019-11-26 Tom Tromey <tom@tromey.com> * Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables. (INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS. (GDBSERVER_LIBS): Use PTHREAD_LIBS. * acinclude.m4: Include ax_pthread.m4. * config.in, configure: Rebuild. Change-Id: I00ec55db6077f2615421a93461fc3be57e916aa0	8 years ago
Christian Biesinger	5abebf3c3f	Import the strerror_r-posix module and use it in GDB. Makes sure to assign the return value of strerror_r to an int, so that we get a compile error if we accidentally get the wrong version. gdb/ChangeLog: 2019-11-15 Christian Biesinger <cbiesinger@google.com> * config.in: Regenerate. * configure: Regenerate. * gdbsupport/common.m4: No longer check for strerror_r. * gdbsupport/posix-strerror.c (safe_strerror): Always call the POSIX version of strerror_r, now that gnulib provides it if necessary. gdb/gdbserver/ChangeLog: 2019-11-15 Christian Biesinger <cbiesinger@google.com> * config.in: Regenerate. * configure: Regenerate. gnulib/ChangeLog: 2019-11-15 Christian Biesinger <cbiesinger@google.com> * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate. * import/Makefile.am: Update. * import/Makefile.in: Regenerate. * import/extra/config.rpath: New file. * import/glthread/lock.c: New file. * import/glthread/lock.h: New file. * import/glthread/threadlib.c: New file. * import/m4/gnulib-cache.m4: Update. * import/m4/gnulib-comp.m4: Update. * import/m4/lib-ld.m4: New file. * import/m4/lib-link.m4: New file. * import/m4/lib-prefix.m4: New file. * import/m4/lock.m4: New file. * import/m4/strerror_r.m4: New file. * import/m4/threadlib.m4: New file. * import/strerror_r.c: New file. * update-gnulib.sh: Import strerror_r-posix. Change-Id: I5cfeb12a5203a4cd94a78581541e6085a68685c3	7 years ago
Christian Biesinger	e7e97a2ecd	Also check for strerror_r in gdbserver I forgot to do this in `b231e86ac9` Since safe_strerror is in gdbsupport, gdbserver also needs to check for strerror_r, although it's less critical since gdbserver does not use threads as much. gdb/gdbserver/ChangeLog: 2019-10-31 Christian Biesinger <cbiesinger@google.com> * config.in: Regenerate. * configure: Regenerate. * configure.ac: Also check for strerror_r. Change-Id: I6a67c8543cd7a28d6dc94f5986f56abcb55727fe	7 years ago
Tom Tromey	c12d372d26	Check for sigprocmask in common.m4 I noticed that gdbsupport uses HAVE_SIGPROCMASK, but common.m4 does not check for it. This means that gdbserver may not compile some gdbsupport code properly. This patch fixes this error. gdb/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Don't check for sigprocmask. * gdbsupport/common.m4 (GDB_AC_COMMON): Check for sigprocmask. gdb/gdbserver/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. Change-Id: I2c0a4dd2c376507b9483b38707a242382faa8163	7 years ago
Sergio Durigan Junior	2d41fa1165	Move gdb-dlfcn.[ch] to gdbsupport/ I need to use 'gdb_dlopen' inside 'gdbsupport/', but it's not yet supported there. This commit moves 'gdb-dlfcn.[ch]' to 'gdbsupport/', which makes it available also on gdbserver. gdb/ChangeLog: 2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com> * configure.ac: Don't check for 'dlfcn.h' (moved to gdbsupport/common.m4). * Makefile.in (COMMON_SFILES): Move 'gdb-dlfcn.c' to 'gdbsupport/'. (HFILES_NO_SRCDIR): Likewise, for 'gdb-dlfcn.h'. * compile/compile-c-support.c: Include 'gdbsupport/gdb-dlfcn.h'. * gdbsupport/common.m4: Check for 'dlfcn.h'. * gdb-dlfcn.c: Move to... * gdbsupport/gdb-dlfcn.c: ... here. * gdb-dlfcn.h: Move to... * gdbsupport/gdb-dlfcn.h: ... here. gdb/gdbserver/ChangeLog: 2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (SFILES): Add 'gdbsupport/gdb-dlfcn.c'. (OBS): Add 'gdbsupport/gdb-dlfcn.o'. * config.in: Regenerate. * configure: Regenerate.	7 years ago
Frank Ch. Eigler	404f29021a	[PR build/24886] disable glibc mcheck support This patch drops gdb's configury support for glibc's mcheck function. It has been observed to cause false abort()s, because it is thread-unsafe yet interposes every malloc/free operation. So if any library transitively used by gdb also uses threads, then these functions can easily corrupt their own checking data. These days, gcc ASAN and valgrind provide high quality checking, and mcheck is apparently itself being slowly deprecated. So, let's stop linking to it. Attached patch drops the autoconf/Makefile machinery for both gdb and gdbserver. No testsuite-visible impact. IMHO not worth mentioning in NEWS. See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939 gdb/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * libmcheck.m4: Remove. * acinclude.m4: Don't include it. * Makefile.in: Don't distribute it. * top.c (print_gdb_configuration): Don't mention it. gdb/gdbserver/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * acinclude.m4: Don't include it.	7 years ago
Simon Marchi	d0ac1c4488	Bump to autoconf 2.69 and automake 1.15.1 When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.	8 years ago
Rainer Orth	44122162ae	Remove ioctl-based procfs support on Solaris This is the previously mentioned patch to get rid of unstructured/ioctl-based procfs support in procfs.c. Given that support for structured procfs was introduced in Solaris 2.6 back in 1997 and we're just removing support for Solaris < 10, there's no point in carrying that baggage (and tons of support for IRIX and OSF/1 as well) around any longer. Most of the patch should be straightforward (removing support for !NEW_PROC_API, non-Solaris OSes and pre-Solaris 10 quirks). Only a few points need explanations: * <sys/syscall.h> was already included unconditionally in most places, so there's no need to have guards in a few remaining ones. * configure.host already obsoletes i?86--sysv4.2, i?86--sysv5, so NEW_PROC_API detection for those in configure.ac can go. * I'm still including <sys/procfs.h> with #define _STRUCTURED_PROC 1. Theoretically, it would be better to include <procfs.h> on Solaris (which includes that define), but that breaks the build over <procfs.h> vs. gdb's "procfs.h", and doesn't exist on Linux. * I've regenerated syscall_table[] in proc-events.c with a small script from Solaris 10, 11.3, 11.4 <sys/syscall.h>, so there should be no traces of older Solaris versions and other OSes left. * prsysent_t and DYNAMIC_SYSCALLS was only used for AIX 5, but AIX doesn't use procfs.c any longer, so all related code can go. The patch was generated with diff -w so one can easier see changes without being distracted by simple reindentations. So far, it has only been compiled and smoke-tested on amd64-pc-solaris2.1[01], sparcv9-sun-solaris2.1[01], and x86_64-pc-linux-gnu. Certainly needs more testing (Solaris 11.3 vs. 11.4, 32-bit gdb, testsuite once I've figured out what's wrong on Solaris 10 etc.), but it's enough to get a first impression how much cleanup is possible here. * configure.ac Don't check for sys/fault.h, sys/syscall.h, sys/proc.h. (NEW_PROC_API): Remove. (prsysent_t, pr_sigset_t, pr_sigaction64_t, pr_siginfo64_t): Likewise. * common/common.m4 (GDB_AC_COMMON): Don't check for sys/syscall.h. * configure: Regenerate. * config.in: Regenerate. * gdbserver/configure: Regenerate. * gdbserver/config.in: Regenerate. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Remove NEW_PROC_API test. * sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Likewise. * linux-btrace.c: Remove HAVE_SYS_SYSCALL_H test. * proc-api.c: Remove !NEW_PROC_API support. Remove HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests. Remove tests for macros always defined on Solaris. * proc-events.c: Remove !NEW_PROC_API support. Remove Remove HAVE_SYS_SYSCALL_H, HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests. (init_syscall_table): Remove non-Solaris syscalls. Remove tests for syscalls present on all Solaris versions. Add missing Solaris 10+ syscalls. (signal_table): Remove non-Solaris signals. Remove tests for signals present on all Solaris versions. (fault_table): Remove non-Solaris faults. Remove tests for faults present on all Solaris versions. * proc-flags.c: Remove !NEW_PROC_API support. (pr_flag_table): Remove non-Solaris and pre-Solaris 7 comments. Remove non-Solaris flags. * proc-why.c: Remove !NEW_PROC_API support. (pr_why_table): Remove meaningless comments. Remove tests for reasons present on all Solaris versions. Remove OSF/1 cases. (proc_prettyfprint_why): Likewise. * procfs.c: Remove !NEW_PROC_API and DYNAMIC_SYSCALLS support. Remove HAVE_SYS_FAULT_H and HAVE_SYS_SYSCALL_H tests. Remove WA_READ test, IRIX watchpoint support. (gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t): Replace by base types. Change users. (gdb_praddset, gdb_prdelset, gdb_premptysysset, gdb_praddsysset) (gdb_prdelset, gdb_pr_issyssetmember): Replace by base macros. Change callers. Remove CTL_PROC_NAME_FMT tests. (gdb_prstatus_t, gdb_lwpstatus_t): Replace by base types. Change users. (sysset_t_size): Remove. Use sizeof (sysset_t) in callers. Remove PROCFS_DONT_PIOCSSIG_CURSIG support. (proc_modify_flag): Replace GDBRESET by PCUNSET. Remove PR_ASYNC, PR_KLC tests. (proc_unset_inherit_on_fork): Remove PR_ASYNC test. (proc_parent_pid): Remove PCWATCH etc. tests. (proc_set_watchpoint): Remove !PCWATCH && !PIOCSWATCH support. Remove PCAGENT test. (proc_get_nthreads) [PIOCNTHR && PIOCTLIST]: Remove. Remove SYS_lwpcreate \|\| SYS_lwp_create test. (proc_get_current_thread): Likewise. [PIOCNTHR && PIOCTLIST]: Remove. [PIOCLSTATUS]: Remove. (procfs_debug_inferior): Remove non-Solaris cases, conditionals. [PRFS_STOPEXEC]: Remove. (syscall_is_lwp_exit): Remove non-Solaris cases, conditionals. (syscall_is_exit): Likewise. (syscall_is_exec): Likewise. (syscall_is_lwp_create): Likewise. Remove SYS_syssgi support. (procfs_wait): Remove PR_ASYNC, !PIOCSSPCACT tests. [SYS_syssgi]: Remove. Remove non-Solaris cases, conditionals. (unconditionally_kill_inferior) [PROCFS_NEED_PIOCSSIG_FOR_KILL]: Remove. (procfs_init_inferior) [SYS_syssgi]: Remove. (procfs_set_exec_trap) [PRFS_STOPEXEC]: Remove. (procfs_inferior_created) [SYS_syssgi]: Remove. (procfs_set_watchpoint): Remove !AIX5 test. (procfs_stopped_by_watchpoint): Remove FLTWATCH test, FLTKWATCH case. (mappingflags) [MA_PHYS]: Remove. (info_mappings_callback): Remove PCAGENT test. Remove PIOCOPENLWP \|\| PCAGENT test.	9 years ago
Pedro Alves	d1928160a3	Don't check termio.h and sgtty.h in common/common.m4 either common/common.m4 still had checks for termio.h/sgtty.h that are stale now. Remove them. gdb/ChangeLog: 2017-11-06 Pedro Alves <palves@redhat.com> * common/common.m4 (GDB_AC_COMMON): No longer check termio.h nor sgtty.h. * config.in, configure: Regenerate. gdb/gdbserver/ChangeLog: 2017-11-06 Pedro Alves <palves@redhat.com> * config.in, configure: Regenerate.	9 years ago
Yao Qi	6d580b635f	GDBserver self tests This patch uses GDB self test in GDBserver. The self tests are run if GDBserver is started with option --selftest. gdb: 2017-08-18 Yao Qi <yao.qi@linaro.org> * NEWS: Mention GDBserver's new option "--selftest". * Makefile.in (SFILES): Remove selftest.c, add common/selftest.c. * selftest.c: Move it to common/selftest.c. * selftest.h: Move it to common/selftest.h. * selftest-arch.c (reset): New function. (tests_with_arch): Call reset. gdb/gdbserver: 2017-08-18 Yao Qi <yao.qi@linaro.org> * Makefile.in (OBS): Add selftest.o. * configure.ac: AC_DEFINE GDB_SELF_TEST if $development. * configure, config.in: Re-generated. * server.c: Include common/sefltest.h. (captured_main): Handle option --selftest. gdb/testsuite: 2017-08-18 Yao Qi <yao.qi@linaro.org> * gdb.server/unittest.exp: New. gdb/doc: 2017-08-18 Yao Qi <yao.qi@linaro.org> * gdb.texinfo (Server): Document "--selftest".	9 years ago
Walfred Tedeschi	239b6d1095	gdbserver-amd64: add HAVE_STRUCT_USER_REGS_STRUCT_(GS\|FS)_BASE for gdbserver. The macros mentioned in the title were set only for GDB. In gdbserver they were not set until now. To align the code in GDB and gdbserver these macros are also added into gdbserver, enabling read and write of gs_base and fs_base registers from the system in new and old kernels. 2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com> gdb/gdbserver/ChangeLog: * configure.ac: Check if the fs_base and gs_base members of `struct user_regs_struct' exist. * config.in: Regenerated. * configure: Likewise.	10 years ago
Pedro Alves	0bcda68539	gdb: Require C++11 Use AX_CXX_COMPILE_STDCXX to detect if the compiler supports C++11, and if -std=xxx switches are necessary to enable C++11. We need to tweak AX_CXX_COMPILE_STDCXX a bit though. Pristine upstream AX_CXX_COMPILE_STDCXX appends -std=gnu++11 to CXX directly. That doesn't work for us, because the top level Makefile passes CXX down to subdirs, and that overrides whatever gdb/Makefile may set CXX to. The result would be that a make invocation from the build/gdb/ directory would use "g++ -std=gnu++11" as expected, while a make invocation at the top level would not. So instead of having AX_CXX_COMPILE_STDCXX set CXX directly, tweak it to AC_SUBST a separate variable -- CXX_DIALECT -- and use '$(CXX) (CXX_DIALECT)' to compile/link. Confirmed that this enables C++11 starting with gcc 4.8, the first gcc release with full C++11 support. Also confirmed that configure errors out gracefully with older GCC releases: checking whether /opt/gcc-4.7/bin/g++ supports C++11 features by default... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++0x... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++0x... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with +std=c++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -h std=c++11... no configure: error: * A compiler with support for C++11 language features is required. Makefile:9451: recipe for target 'configure-gdb' failed make[1]: * [configure-gdb] Error 1 make[1]: Leaving directory '/home/pedro/brno/pedro/gdb/mygit/cxx-convertion/build-gcc-4.7' If we need to revert back to making C++11 optional, all that's necessary is to change the "mandatory" to "optional" in configure.ac and regenerate configure (both gdb and gdbserver). gdb/ChangeLog: 2016-10-28 Pedro Alves <palves@redhat.com> * Makefile.in (CXX_DIALECT): Get from configure. (COMPILE.pre, CC_LD): Append $(CXX_DIALECT). (FLAGS_TO_PASS): Pass CXX_DIALECT. * acinclude.m4: Include ax_cxx_compile_stdcxx.m4. * ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP. * configure.ac: Call AX_CXX_COMPILE_STDCXX. * config.in: Regenerate. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2016-10-28 Pedro Alves <palves@redhat.com> * Makefile.in (CXX_DIALECT): Get from configure. (COMPILE.pre, CC_LD): Append $(CXX_DIALECT). * acinclude.m4: Include ../ax_cxx_compile_stdcxx.m4. * configure.ac: Call AX_CXX_COMPILE_STDCXX. * config.in: Regenerate. * configure: Regenerate.	10 years ago
Pedro Alves	f348d89aec	Fix PR gdb/18653: gdb disturbs inferior's inherited signal dispositions gdb's (or gdbserver's) own signal handling should not interfere with the signal dispositions their spawned children inherit. However, it currently does. For example, some paths in gdb cause SIGPIPE to be set to SIG_IGN, and as consequence, the child starts with SIGPIPE to set to SIG_IGN too, even though gdb was started with SIGPIPE set to SIG_DFL. This is because the exec family of functions does not reset the signal disposition of signals that are set to SIG_IGN: http://pubs.opengroup.org/onlinepubs/7908799/xsh/execve.html Signals set to the default action (SIG_DFL) in the calling process image are set to the default action in the new process image. Signals set to be ignored (SIG_IGN) by the calling process image are set to be ignored by the new process image. Signals set to be caught by the calling process image are set to the default action in the new process image (see <signal.h>). And neither does it reset signal masks or flags. In order to be transparent, when spawning new child processes to debug (with "run", etc.), reset signal actions and mask back to what was originally inherited from gdb/gdbserver's parent, just before execing the target program to debug. gdb/ChangeLog: 2016-08-09 Pedro Alves <palves@redhat.com> PR gdb/18653 * Makefile.in (SFILES): Add common/signals-state-save-restore.c. (HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h. (COMMON_OBS): Add signals-state-save-restore.o. (signals-state-save-restore.o): New rule. * configure: Regenerate. * fork-child.c: Include "signals-state-save-restore.h". (fork_inferior): Call restore_original_signals_state. * main.c: Include "signals-state-save-restore.h". (captured_main): Call save_original_signals_state. * common/common.m4: Add sigaction to AC_CHECK_FUNCS checks. * common/signals-state-save-restore.c: New file. * common/signals-state-save-restore.h: New file. gdb/gdbserver/ChangeLog: 2016-08-09 Pedro Alves <palves@redhat.com> PR gdb/18653 * Makefile.in (OBS): Add signals-state-save-restore.o. (signals-state-save-restore.o): New rule. * config.in: Regenerate. * configure: Regenerate. * linux-low.c: Include "signals-state-save-restore.h". (linux_create_inferior): Call restore_original_signals_state. * server.c: Include "dispositions-save-restore.h". (captured_main): Call save_original_signals_state. gdb/testsuite/ChangeLog: 2016-08-09 Pedro Alves <palves@redhat.com> PR gdb/18653 * gdb.base/signals-state-child.c: New file. * gdb.base/signals-state-child.exp: New file. * gdb.gdb/selftest.exp (do_steps_and_nexts): Add new pattern.	10 years ago
Gary Benson	eb0edac83f	Fix gdbserver build failure on targets without fork This commit fixes nat/linux-namespaces.c to build correctly on targets without fork. gdb/ChangeLog: * nat/linux-namespaces.c (do_fork): New function. (linux_mntns_get_helper): Use the above. gdb/gdbserver/ChangeLog: * configure.ac (AC_FUNC_FORK): New check. * config.in: Regenerate. * configure: Likewise.	11 years ago
Pedro Alves	5401971915	C++: handle glibc's ptrace(enum __ptrace_request, ...) Building in C++ mode issues ~40 warnings like this: ../../src/gdb/linux-nat.c: In function ‘int linux_handle_extended_wait(lwp_info, int, int)’: ../../src/gdb/linux-nat.c:2016:51: warning: invalid conversion from ‘int’ to ‘__ptrace_request’ [-fpermissive] ptrace (PTRACE_GETEVENTMSG, pid, 0, &new_pid); The issue is that in glibc, ptrace's first parameter is an enum. That's not a problem if we pick the PTRACE_XXX requests from sys/ptrace.h, as those will be values of the corresponding enum. However, we have fallback definitions for PTRACE_XXX symbols when the system headers miss them (such as PTRACE_GETEVENTMSG above), and those are plain integer constants. E.g., nat/linux-ptrace.h: #define PTRACE_GETEVENTMSG 0x4201 One idea would be to fix this by defining those fallbacks like: -#define PTRACE_GETEVENTMSG 0x4201 +#define PTRACE_GETEVENTMSG ((enum __ptrace_request) 0x4201) However, while glibc's ptrace uses enum __ptrace_request for first parameter: extern long int ptrace (enum __ptrace_request __request, ...) __THROW; other libc's, like e.g., Android's bionic do not -- in that case, the first parameter is int: long ptrace(int request, pid_t pid, void addr, void * data); So the fix I came up is to make configure/ptrace.m4 also detect the type of the ptrace's first parameter and defin PTRACE_TYPE_ARG1, as already does the for parameters 3-4, and then simply wrap ptrace with a macro that casts the first argument to the detected type. (I'm leaving adding a nicer wrapper for when we drop building in C). While this adds the wrapper, GNU/Linux files won't use it until the next patch, which makes all native GNU/Linux files include gdb_ptrace.h. gdb/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * ptrace.m4 (ptrace tests): Test in C++ mode. Try with 'enum __ptrace_request as first parameter type instead of int. (PTRACE_TYPE_ARG1): Define. * nat/gdb_ptrace.h [!PTRACE_TYPE_ARG5] (ptrace): Define as wrapper that casts first argument to PTRACE_TYPE_ARG1. * config.in: Regenerate. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * config.in: Regenerate. * configure: Regenerate.	11 years ago
Pedro Alves	eb7aa56163	make gdbserver use the same ptrace autoconf checks as gdb This factors the ptrace checks out of gdb's configure.ac to a new ptrace.m4 file, and then makes gdbserver's configure.ac source it too. gdb/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * acinclude.m4: Include ptrace.m4. * configure.ac: Call GDB_AC_PTRACE and move ptrace checks ... * ptrace.m4: ... to this new file. gdb/gdbserver/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * acinclude.m4: Include ../ptrace.m4. * configure.ac: Call GDB_AC_PTRACE. * config.in, configure: Regenerate.	11 years ago
Jan Kratochvil	db1ff28b60	Revert the previous 7 commits of: Validate binary before use `ddc98fbf2f` Create empty nat/linux-maps.[ch] and common/target-utils.[ch] `6e5b4429db` Move gdb_regex* to common/ `f7af1fcd75` Prepare linux_find_memory_regions_full & co. for move `9904185cfd` Move linux_find_memory_regions_full & co. `700ca40f6f` gdbserver build-id attribute generator `ca5268b6be` Validate symbol file using build-id `0a94970d66` Tests for validate symbol file using build-id gdb/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 6 commits: Create empty nat/linux-maps.[ch] and common/target-utils.[ch]. Move gdb_regex* to common/ Prepare linux_find_memory_regions_full & co. for move Move linux_find_memory_regions_full & co. gdbserver build-id attribute generator Validate symbol file using build-id gdb/gdbserver/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 3 commits: Move gdb_regex* to common/ Move linux_find_memory_regions_full & co. gdbserver build-id attribute generator gdb/doc/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 2 commits: gdbserver build-id attribute generator Validate symbol file using build-id gdb/testsuite/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous commit: Tests for validate symbol file using build-id.	11 years ago
Jan Kratochvil	6e5b4429db	Move gdb_regex* to common/ Later patches need regex support also in gdbserver. gdb/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to common/gdb_regex.h. (COMMON_OBS): Add gdb_regex.o. (gdb_regex.o): New. * common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex, --without-included-regex and USE_INCLUDED_REGEX. * common/gdb_regex.c: New file from utils.c functions. * common/gdb_regex.h: Move it here from gdb_regex.h, update include file wrapping define name. * configure: Rebuilt. * configure.ac (gdb_use_included_regex, --without-included-regex) (USE_INCLUDED_REGEX): Move them to common/common.m4. * gdb_regex.h: Move it to common/gdb_regex.h. * utils.c: Remove include gdb_regex.h. (do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error) (compile_rx_or_error): Move them to common/gdb_regex.c. gdb/gdbserver/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (OBS): Add gdb_regex.o. (gdb_regex.o): New. * config.in: Rebuilt. * configure: Rebuilt.	11 years ago
Gary Benson	4b8b5e7245	Introduce nat/linux-namespaces.[ch] This commit introduces new shared files nat/linux-namespaces.[ch] containing code to support Linux namespaces that will be used by both GDB and gdbserver. gdb/ChangeLog: * configure.ac (AC_CHECK_FUNCS): Add setns. * config.in: Regenerate. * configure: Likewise. * nat/linux-namespaces.h: New file. * nat/linux-namespaces.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h. (linux-namespaces.o): New rule. * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise. * config/powerpc/linux.mh (NATDEPFILES): Likewise. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/s390/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. gdb/gdbserver/ChangeLog: * configure.ac (AC_CHECK_FUNCS): Add setns. * config.in: Regenerate. * configure: Likewise. * Makefile.in (SFILES): Add nat/linux-namespaces.c. (linux-namespaces.o): New rule. * configure.srv (srv_linux_obj): Add linux-namespaces.o.	11 years ago
Joel Brobecker	1041a03c1b	Fix gdbserver build failure on arm-android. The following patch... \| proc-service, extern "C" \| \| libthread_db.so calls symbols in the client (GDB), through the \| proc-service interface. These routines must have extern "C" linkage \| so their symbol names are not mangled when GDB is built as a C++ \| program. On the GDBserver side, we were missing fallback declarations for \| all these symbols. \| \| gdb/ChangeLog: \| \| * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP. \| \| gdb/gdbserver/ChangeLog: \| 2015-02-27 Pedro Alves <palves@redhat.com> \| \| * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP. \| [!HAVE_PROC_SERVICE_H] (struct ps_prochandle): Forward declare. \| [!HAVE_PROC_SERVICE_H] (ps_pdread, ps_pdwrite, ps_ptread) \| ps_ptwrite, ps_lgetregs, ps_lsetregs, ps_lgetfpregs) \| (ps_lsetfpregs, ps_getpid) \| (ps_get_thread_area, ps_pglobal_lookup, ps_pstop, ps_pcontinue) \| (ps_lstop, ps_lcontinue, ps_lgetxregsize, ps_lgetxregs) \| (ps_lsetxregs, ps_plog): Declare. ... added a number of declarations which do not compile when cross- compiling GDBserver on arm-android. The problem comes from type prfpregset_t not being declared: /[...]/gdbserver/gdb_proc_service.h:98:47: error: unknown type name 'prfpregset_t' After searching through the includes of the install we have, I could not find that type being declared anywhere. So I did the same as for prgregset_t, and created the typedef if the type isn't declared. gdb/gdbserver/ChangeLog: * configure.ac: Add prfpregset_t BFD_HAVE_SYS_PROCFS_TYPE check. * configure, config.in: Regenerate. * gdb_proc_service.h [HAVE_PRFPREGSET_T] (prfpregset_t): Declare typedef.	12 years ago
Gary Benson	791c00567a	Move remote_fileio_to_fio_stat to gdb/common This commit moves remote_fileio_to_fio_stat and its supporting functions into new files common/common-remote-fileio.[ch]. gdb/ChangeLog: * common/common-remote-fileio.h: New file. * common/common-remote-fileio.c: Likewise. * Makefile.in (SFILES): Add common/common-remote-fileio.c. (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h. (COMMON_OBS): Add common-remote-fileio.o. (common-remote-fileio.o): New rule. * remote-fileio.h (common-remote-fileio.h): New include. * remote-fileio.c (gdb/fileio.h): Do not include. (remote_fileio_to_be): Moved to common-remote-fileio.h. (remote_fileio_to_fio_uint): Likewise. (remote_fileio_to_fio_time): Likewise. (remote_fileio_mode_to_target): Moved to common-remote-fileio.c. (remote_fileio_to_fio_mode): Likewise. (remote_fileio_to_fio_ulong): Likewise. (remote_fileio_to_fio_stat): Likewise. gdb/gdbserver/ChangeLog: * configure.ac (AC_CHECK_MEMBERS): Add checks for struct stat.st_blocks and struct stat.st_blksize. * configure: Regenerate. * config.in: Likewise. * Makefile.in (SFILES): Add common/common-remote-fileio.c. (OBS): Add common-remote-fileio.o. (common-remote-fileio.o): New rule.	12 years ago
Pedro Alves	07697489f4	Create libiberty.m4, have GDB and GDBserver use it Converting GDB to be a C++ program, I stumbled on 'basename' issues, like: src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char)’ /usr/include/string.h:597:26: error: ambiguates old declaration ‘const char basename(const char)’ which I believe led to this bit in gold's configure.ac: dnl We have to check these in C, not C++, because autoconf generates dnl tests which have no type information, and current glibc provides dnl multiple declarations of functions like basename when compiling dnl with C++. AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp]) These checks IIUC intend to generate all the HAVE_DECL_FOO symbols that libiberty.h and ansidecl.h check. GDB is missing these checks currently, which results in the conflict shown above. This adds an m4 file that both GDB and GDBserver's configury use to pull in the autoconf checks that libiberty clients needs done in order to use these libiberty.h/ansidecl.h. gdb/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> libiberty.m4: New file. * acinclude.m4: Include libiberty.m4. * configure.ac: Call libiberty_INIT. * config.in, configure: Regenerate. gdb/gdbserver/ 2015-02-27 Pedro Alves <palves@redhat.com> * acinclude.m4: Include libiberty.m4. * configure.ac: Call libiberty_INIT. * config.in, configure: Regenerate.	12 years ago
Yao Qi	cdf436294f	Detect 64-bit-ness in PowerPC Book III-E This patch is to teach both GDB and GDBServer to detect 64-bit inferior correctly. We find a problem that GDBServer is unable to detect on a e5500 core processor. Current GDBServer assumes that MSR is a 64-bit register, but MSR is a 32-bit register in Book III-E. This patch is to fix this problem by checking the right bit in MSR, in order to handle both Book III-S and Book III-E. In order to detect Book III-S and Book III-E, we check the PPC_FEATURE_BOOKE from the host's HWCAP (by getauxval on glibc >= 2.16. If getauxval doesn't exist, we implement the fallback by parsing /proc/self/auxv), because it should an invariant on the same machine cross different processes. In order to share code, I add nat/ppc-linux.c for both GDB and GDBserver side. gdb: 2015-01-14 Yao Qi <yao@codesourcery.com> * Makefile.in (ppc-linux.o): New rule. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o. * configure.ac: AC_CHECK_FUNCS(getauxval). * config.in: Re-generated. * configure: Re-generated. * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p): Declare. * nat/ppc-linux.c: New file. * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]: Call ppc64_64bit_inferior_p. gdb/gdbserver: 2015-01-14 Yao Qi <yao@codesourcery.com> * Makefile.in (SFILES): Add nat/ppc-linux.c. (ppc-linux.o): New rule. * configure.srv (powerpc--linux): Add ppc-linux.o. configure.ac: AC_CHECK_FUNCS(getauxval). * config.in: Re-generated. * configure: Re-generated. * linux-ppc-low.c (ppc_arch_setup) [__powerpc64__]: Call ppc64_64bit_inferior_p	12 years ago
Yao Qi	bdca27a2f5	Use readlink unconditionally Since readlink module is imported, we can use it unconditionally. This patch is to remove configure checks and HAVE_READLINK checks in code. It was mentioned in the patch below [RFA/commit] gdbserver: return ENOSYS if readlink not supported. https://sourceware.org/ml/gdb-patches/2012-02/msg00148.html to use readlink in gdbserver, but we chose something simple at that moment. gdb: 2014-11-28 Yao Qi <yao@codesourcery.com> * configure.ac (AC_CHECK_FUNCS): Remove readlink. * config.in, configure: Re-generate. * inf-child.c (inf_child_fileio_readlink): Don't check HAVE_READLINK is defined. gdb/gdbserver: 2014-11-28 Yao Qi <yao@codesourcery.com> * configure.ac(AC_CHECK_FUNCS): Remove readlink. * config.in, configure: Re-generate. * hostio.c (handle_unlink): Remove code checking HAVE_READLINK is defined.	12 years ago
Yao Qi	9c232dda88	Include alloca.h unconditionally Since gnulib alloca module was imported, we can include alloca.h in both gdb and gdbserver unconditionally, so this patch adds inclusion of alloca.h in common-defs.h. This patch also removes AC_FUNC_ALLOCA in configure.ac because we don't need to check alloca any more. This patch below is removed in fact. [RFA/commit] include alloca.h if available. https://www.sourceware.org/ml/gdb-patches/2010-08/msg00566.html Since alloca.h is from gnulib now, we don't have to check malloc.h in configure and include malloc.h in code. This patch also remove them too. gdb: 2014-11-21 Yao Qi <yao@codesourcery.com> * common/common-defs.h: Include alloca.h * configure.ac: Don't invoke AC_FUNC_ALLOCA. * configure: Re-generated. * defs.h: Remove code handling alloca. * utils.c (gdb_realpath): Don't check HAVE_ALLOCA is defined or not. gdb/gdbserver: 2014-11-21 Yao Qi <yao@codesourcery.com> * configure.ac: Don't invoke AC_FUNC_ALLOCA. (AC_CHECK_HEADERS): Remove malloc.h. * configure: Re-generated. * config.in: Re-generated. * server.h: Don't include alloca.h and malloc.h. * gdbreplay.c: Don't check HAVE_ALLOCA_H is defined. Don't include malloc.h.	12 years ago
Gary Benson	e9bcb65852	Introduce common/gdb_setjmp.h This commit creates a new file, common/gdb_setjmp.h, to hold some portability macros for setjmp/longjmp et al. that are used by the exceptions subsystem and by the demangler crash catcher. gdb/ChangeLog: * common/gdb_setjmp.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_setjmp.h. * configure.ac: Move sigsetjmp check... * common/common.m4: ...here. * configure: Regenerate. * cp-support.c (SIGJMP_BUF): Delete. (SIGSETJMP): Likewise. (SIGLONGJMP): Likewise. * exceptions.h (gdb_setjmp.h): Include. (setjmp.h): Do not include. (EXCEPTIONS_SIGJMP_BUF): Delete. (EXCEPTIONS_SIGSETJMP): Likewise. (EXCEPTIONS_SIGLONGJMP): Likewise. Replace all uses of EXCEPTIONS_SIG* macros with SIG* macros from gdb_setjmp.h. * exceptions.c: Likewise. gdb/gdbserver/ChangeLog: * config.in: Regenerate. * configure: Likewise.	12 years ago
Gary Benson	bb974a2493	Move errno.h to common-defs.h This commit moves the inclusion of errno.h to common-defs.h and removes all other inclusions. Note that prior to this commit server.h included errno.h protected by "#ifdef HAVE_ERRNO_H". This protection was added with the Windows CE port, which is currently broken. Since no other platform needs this, I have removed the protection and the configury to support it. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include errno.h. * defs.h: Do not include errno.h. * ada-typeprint.c: Likewise. * c-typeprint.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * event-loop.c: Likewise. * f-typeprint.c: Likewise. * gnu-nat.c: Likewise. * go32-nat.c: Likewise. * i386gnu-nat.c: Likewise. * m2-typeprint.c: Likewise. * nat/linux-btrace.c: Likewise. * p-typeprint.c: Likewise. * procfs.c: Likewise. * remote-sim.c: Likewise. * rs6000-nat.c: Likewise. * target.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * configure.ac (AC_CHECK_HEADERS): Remove errno.h. * configure: Regenerate. * config.in: Likewise. * server.h: Do not include errno.h. * event-loop.c: Likewise. * hostio-errno.c: Likewise. * linux-low.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise. * gdbreplay.c: Unconditionally include errno.h.	12 years ago
Gary Benson	698b3e0833	Fix mingw32 build on x86-64 RHEL 6.5 This commit fixes the mingw32 build on x86-64 RHEL 6.5. gdb/gdbserver/ 2014-06-20 Gary Benson <gbenson@redhat.com> * configure.ac (AC_REPLACE_FUNCS) <vasprintf, vsnprintf>: Removed. * configure: Regenerated. * config.in: Likewise.	12 years ago
Doug Evans	87ce2a04c5	New gdbserver option --debug-format=timestamp. * NEWS: Mention it. gdbserver/ * configure.ac (AC_CHECK_FUNCS): Add test for gettimeofday. * configure: Regenerate. * config.in: Regenerate. * Makefile.in (SFILES): Add debug.c. (OBS): Add debug.o. * debug.c: New file. * debug.h: New file. * linux-aarch64-low.c (): Update all debugging printfs to use debug_printf instead of fprintf. linux-arm-low.c (): Ditto. linux-cris-low.c (): Ditto. linux-crisv32-low.c (): Ditto. linux-m32r-low.c (): Ditto. linux-sparc-low.c (): Ditto. linux-x86.c (): Ditto. linux-low.c (): Ditto. (linux_wait_1): Add calls to debug_enter, debug_exit. (linux_wait): Remove redundant debugging printf. (stop_all_lwps): Add calls to debug_enter, debug_exit. (linux_resume, unstop_all_lwps): Ditto. mem-break.c (): Update all debugging printfs to use debug_printf instead of fprintf. remote-utils.c (): Ditto. thread-db.c (): Ditto. server.c #include <ctype.h>, "gdb_vecs.h". (debug_threads): Moved to debug.c. (): Update all debugging printfs to use debug_printf instead of fprintf. (start_inferior): Replace call to fflush with call to debug_flush. (monitor_show_help): Mention set debug-format. (parse_debug_format_options): New function. (handle_monitor_command): Handle "monitor set debug-format". (gdbserver_usage): Mention --debug-format. (main): Parse --debug-format. server.h (debug_threads): Declaration moved to debug.h. #include "debug.h". * tracepoint.c (trace_debug_1) [!IN_PROCESS_AGENT]: Add version of trace_debug_1 that uses debug_printf. (tracepoint_look_up_symbols): Update all debugging printfs to use debug_printf instead of fprintf. doc/ * gdb.texinfo (Server): Mention --debug-format=all\|none\|timestamp. (gdbserver man): Ditto. testsuite/ * gdb.server/server-mon.exp: Add tests for "set debug-format".	13 years ago
Tom Tromey	2978b11100	remove gdb_dirent.h This removes gdb_dirent.h and updates the code to use dirent.h instead. It also removes the now-useless configure checks. 2013-11-18 Tom Tromey <tromey@redhat.com> * common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT. * common/gdb_dirent.h: Remove. * common/filestuff.c: Use dirent.h. * common/linux-osdata.c: Use dirent.h. (NAMELEN): Define. * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT. * linux-fork.c: Use dirent.h * linux-nat.c: Use dirent.h. * nto-procfs.c: Use dirent.h. * procfs.c: Use dirent.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT.	13 years ago
Tom Tromey	1bd2f0baf1	remove unused gdbserver configury This updates gdbserver's configure.ac to remove checks that aren't directly needed by gdbserver. 2013-11-08 Tom Tromey <tromey@redhat.com> * configure, config.in: Rebuild. * configure.ac: Remove unused configury.	13 years ago

15 Commits (f757c5cae97b1437f4fcf2e25c53376775ea541f)