* config/tc-s390.c (current_cpu): Initialize with latest CPU.
(init_default_arch): Default to z/Architecture mode if CPU provides it.
Remove the check setting the CPU default.
2010-11-25 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add S390_OPCODE_MAXCPU.
This makes sure that rs6000-core.c gets recompiled whenever any of its
dependencies get changed.
bfd/ChangeLog:
* Makefile.am (OPTIONAL_BACKENDS): Add rs6000-core.lo.
(OPTIONAL_BACKENDS_CFILES): Add rs6000-core.c.
* Makefile.in: Regenerate.
bfd_uses_spe_extensions should only be used when BFD has been built
with ELF support. The typical way of checking that in GDB is to use
the HAVE_ELF macro.
gdb/ChangeLog:
* rs6000-tdep.c (bfd_uses_spe_extensions): Use bfd_elf_get_obj_attr_int
only if HAVE_ELF is defined.
* gdb.asm/asm-source.exp: Add new target "powerpc64"; expect leading `.'
on ppc64's symbols; "finish" and "return" commands must accept to
show the caller line again as well as the line after.
* gdb.asm/powerpc64.inc: New file.
(gdb_expect_list): Add verbose -log call for each pattern.
* gdb.base/signals.exp (test_handle_all_print): Call it.
Reduce timeout increment from 6 minutes to 1 minute.
* gdb.server/ext-run.exp: Call it.
* doc/as.texinfo: Refer to and include c-xtensa.texi for Xtensa
options. Move Xtensa options to proper alphabetical location.
* doc/c-xtensa.texi: Add markup for use in manpage generation.
2010-11-23 H.J. Lu <hongjiu.lu@intel.com>
* doc/as.texinfo: Refer to and include c-i386.texi for i386
options.
* doc/c-i386.texi: Add markup for use in manpage generation.
`both*'. New configure option --{en,dis}able-ld.
ld, gold/
* configure.ac: For --enable-gold, handle value `default' instead of
`both*'. Always install ld as ld.gold, install as ld if gold is
the default.
PR python/12212
* python/py-inferior.c (find_thread_object): Check if PIDGET
returns 0.
2010-11-23 Phil Muldoon <pmuldoon@redhat.com>
PR python/12212
* gdb.python/python.exp: Check that selected_thread raises an
error when no inferior is loaded.
When the sim is configured with profile support disabled, the build fails:
./../common/sim-profile.c: In function 'profile_option_handler':
./../common/sim-profile.c:337:6: warning: implicit declaration of function 'PROFILE_PC_FREQ'
./../common/sim-profile.c:337:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:351:6: warning: implicit declaration of function 'PROFILE_PC_NR_BUCKETS'
./../common/sim-profile.c:351:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:381:6: warning: implicit declaration of function 'PROFILE_PC_SHIFT'
./../common/sim-profile.c:381:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:405:8: warning: implicit declaration of function 'PROFILE_PC_START'
./../common/sim-profile.c:405:8: error: lvalue required as left operand of assignment
./../common/sim-profile.c:406:8: warning: implicit declaration of function 'PROFILE_PC_END'
./../common/sim-profile.c:406:8: error: lvalue required as left operand of assignment
./../common/sim-profile.c: In function 'profile_uninstall':
./../common/sim-profile.c:1299:7: warning: implicit declaration of function 'PROFILE_INSN_COUNT'
./../common/sim-profile.c:1299:37: warning: comparison between pointer and integer
./../common/sim-profile.c:1300:2: warning: passing argument 1 of 'zfree' makes pointer from integer without a cast
../common/sim-utils.h:30:6: note: expected 'void *' but argument is of type 'int'
make[2]: *** [sim-profile.o] Error 1
So add some stubs similar to how some of the other subsystems are
stubbed out so things build correctly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When building with device and hw support, the sim-core code generates a
lot of build time warnings such as:
./../common/sim-core.c: In function 'sim_core_map_attach':
./../common/sim-core.c:198:7: warning: passing argument 1 of 'device_error' from incompatible pointer type
../common/sim-core.h:347:6: note: expected 'struct device *' but argument is of type 'struct hw *'
./../common/sim-core.c:235:7: warning: passing argument 1 of 'device_error' from incompatible pointer type
../common/sim-core.h:347:6: note: expected 'struct device *' but argument is of type 'struct hw *'
In reality, these two structures get cast back and forth in the core
code already and so are "compatible". So tweak the three functions
that generate all of these warnings to include the casts automatically.
I know this isn't exactly clean, but the current device/hw ifdef
approach is full of landmines itself and I'm not entirely sure how
to unscrew it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
A recent change in check_typedef caused the following regression,
considering:
type String_Access is access String;
S1 : String_Access := null;
Trying to print S1, we get:
(gdb) print s1
$1 = (string) (null)
The type name is wrong. We were expecting:
(gdb) print s1
$1 = (string_bug.string_access) (null)
The extensive comment in this patch explains how pointers to arrays
are encoded when the array is a "fat pointer". What happened is
that the change in check_typedef broke a type-equality test that
we were performing. The test really was on the fringe, but it
turns out that, for what we're doing, we're really only interested
in the main-type portion of the type.
The patch adjust the check accordingly.
gdb/ChangeLog:
* ada-lang.c (ada_to_fixed_type): Expand function documentation.
Return the original type if the main type portions match rather
than when the type themselves match.
We have a variant record whose value is defined as follow:
type Discriminant_Record (Num1, Num2,
Num3, Num4 : Natural) is record
Field1 : My_Record_Array (1 .. Num2);
Field2 : My_Record_Array (Num1 .. 10);
Field3 : My_Record_Array (Num1 .. Num2);
Field4 : My_Record_Array (Num3 .. Num2);
Field5 : My_Record_Array (Num4 .. Num2);
end record;
Dire : Discriminant_Record (1, 7, 3, 0);
However, we're trying to print "Dire" before it is elaborated.
This is common if one breaks on a function and then starts doing
"info locals" for instance.
What happens is that GDB reads bogus values for fields Num1 to
Num4, and deduces a bogus (ginormouos) size for component
"Field1". The length is so large that it then later causes
an overflow in the overall record length computation. Things
go downhill from there, because length(field1) > length(record).
So, when after we've fetched the value of the record based on
the computed size, we crash trying to access unallocated memory
when accessing field1...
The first fix we can do is to check the size of the field
against the maximum object size. If it exceeds that size,
then we know the record will also exceed that size...
gdb/ChangeLog:
* ada-lang.c (ada_template_to_fixed_record_type_1):
For dynamic fields, check the field size against the maximum
object size.
On mips-irix, the debugger has trouble stepping over the following
line of code:
S: Shape'Class := R; <<<<---- STOP here
Here is what happens:
(gdb) n
warning: GDB can't find the start of the function at 0x7fff2bd8.
GDB is unable to find the start of the function at 0x7fff2bd8
and thus can't determine the size of that function's stack frame.
This means that GDB may be unable to access that stack frame, or
the frames below it.
This problem is most likely caused by an invalid program counter or
stack pointer.
However, if you think GDB should simply search farther back
from 0x7fff2bd8 for code which looks like the beginning of a
function, you can increase the range of the search using the `set
heuristic-fence-post' command.
0x7fff2bd8 in ?? ()
The program does in fact jump to this code location, which is a trampoline
located on the stack (there is an implicit call to a routine internally
generated by the Ada expander). As it is on the stack, GDB is naturally
unable to find the bounds of the current function, or any debugging
information, and is thus unable to continue.
This patch adds support for this sort of trampoline.
gdb/ChangeLog:
* mips-irix-tdep.c (mips_irix_n32_stack_tramp_frame_init): New
function.
(mips_irix_n32_stack_tramp_frame): New static global.
(mips_irix_init_abi): Add mips_irix_n32_stack_tramp_frame to
list of unwinder.
Type symbols that are used to decode the Ada task control block may be
duplicated in any unit that uses a tasking feature; an Ada lookup of
these symbols would collect all the duplicated instances and could
provoke the load of a huge amount of debug symbols in the process.
However, when decoding the task information, we are only interested in
one instance; and we have the full name of the symbol anyway. So use
a C lookup instead of an Ada lookup.
2010-11-05 Jerome Guitton <guitton@adacore.com>
* ada-tasks.c (get_tcb_types_info): Use C lookups to get
ATCB symbols.
When trying to resolve an incomplete type, if there is no complete
version of that type available, GDB can go in an infinite loop.
This is because ada_check_typedef makes a recursive call to itself,
in an attempt to make sure that the returned type is never a typedef.
However, when no complete type is found, the current logic causes us
to keep going indefinitely through the same path...
This patch fixes the problem by performing the recursive call to
ada_check_typedef only when a TYPE_CODE_TYPDEF layer needs to be
stripped.
gdb/ChangeLog:
* ada-lang.c (ada_check_typedef): Call ada_check_typedef only
if type1 is a typedef.
This is a new routine that is being generated by the expander in
the context of controlled types. This patch adds it to the list of such
routines so that the debugger does not show it when selecting the first
"user" frame (when switching tasks for instance).
gdb/ChangeLog:
* ada-lang.h (ADA_KNOWN_AUXILIARY_FUNCTION_NAME_PATTERNS): Add
"_finalizer" to the list.
gdb/ChangeLog:
* ada-typeprint.c (print_array_type): Fix formatting in comment.
(print_selected_record_field_types): Fix formatting in function
documentation.
A new-line was missing at the end of the output of the `show ravenscar
task-switching' command. For instance:
(gdb) show ravenscar task-switching
Support for Ravenscar task/thread switching is enabled(gdb)
This patch fixes it.
gdb/ChangeLog:
* ravenscar-thread.c (show_ravenscar_task_switching_command):
Add missing '\n' in output.
The GNAT Ravenscar implementation has recently been enhanced to allow
programs using that runtime to run on multi-cpu systems. One of the
changes that were made is that the name of the symbol we use to
determine which task is the currently-running task has changed.
This patch enhances the debugger to use the new name, and fallback on
the old name if not found (this is for compatibility with older versions
of the compiler/runtime).
gdb/ChangeLog:
* ravenscar-thread.c (running_thread_name): Change value.
(read_thread_id): Remove advance declaration.
(get_running_thread_msymbol): New function.
(has_ravenscar_runtime): Use get_running_thread_msymbol to
compute msym_running_thread.
(get_running_thread_id): Renames read_thread_id. Slight modifications
to not take any argument anymore, using get_running_thread_msymbol
to determine which symbol to use instead.
(ravenscar_running_thread): Use get_running_thread_id instead of
read_thread_id.
Marc Khouzam
Alan Modra
Pedro Alves
Matthew Gretton-Dann
Andreas Krebbel
Joel Brobecker
gdbadmin
Mike Frysinger
Jan Kratochvil
Thiago Jung Bauermann
Doug Evans
Richard Sandiford
Sterling Augustine
H.J. Lu
Nick Clifton
Tom Tromey
Phil Muldoon