binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Aaron Merey	28bc495137	config/debuginfod.m4: Add check for libdebuginfod 0.188 Add check for libdebuginfod 0.188 in AC_DEBUGINFOD and if found define macro HAVE_LIBDEBUGINFOD_FIND_SECTION. This macro indicates support for downloading ELF sections from debuginfod servers.	3 years ago
Joseph Myers	7fdd4fcee1	config: Fix host -rdynamic detection for build != host != target [Merge from GCC commit 4d9bc81a5d8d884dee7a7781fa4c1577a6c9681a.] The GCC_ENABLE_PLUGINS configure logic for detecting whether -rdynamic is necessary and supported uses an appropriate objdump for $host binaries (running on $build) in cases where $host is $build or $target. However, it is missing such logic in the case where $host is neither $build nor $target, resulting in the compilers not being linked with -rdynamic and plugins not being usable with such a compiler. In fact $ac_cv_prog_OBJDUMP, as used when $build = $host, is always an objdump for $host binaries that runs on $build; that is, it's appropriate to use in this case as well. Tested in such a configuration that it does result in cc1 being linked with -rdynamic as expected. Also bootstrapped with no regressions for x86_64-pc-linux-gnu. config/ * gcc-plugin.m4 (GCC_ENABLE_PLUGINS): Use export_sym_check="$ac_cv_prog_OBJDUMP -T" also when host is not build or target.	3 years ago
Sergei Trofimovich	ba1eb82eae	mh-mingw: drop unused BOOT_CXXFLAGS variable gcc's build system has BOOT_CFLAGS and various STAGE<N>_C{,XX}FLAGS variables. BOOT_CXXFLAGS is not handled anywhere. config/ * mh-mingw: Drop assignment of unused BOOT_CXXFLAGS variable.	3 years ago
Martin Storsjö	a710d78f31	mh-mingw: Set __USE_MINGW_ACCESS in missed C++ flags variables This is similar to what was done in eea4e2ff0a3f5e7f37df204c070cc5d9ef339e6e (where it was added to STAGE_CXXFLAGS), but this adds the flag to the CXXFLAGS and BOOT_CXXFLAGS variables too (as it's already added to CFLAGS and BOOT_CFLAGS). 2021-04-09 Martin Storsjö <martin@martin.st> config/ mh-mingw: Set __USE_MINGW_ACCESS in missed C++ flags variables	3 years ago
Iain Sandoe	c841db9538	configure: Allow host fragments to react to --enable-host-shared. This makes the host_shared value available to host makefile fragments. It uses this to adjust Darwin's mdynamic-no-pic in the case that shared host resources are required. Signed-off-by: Iain Sandoe <iain@sandoe.co.uk> config/ * mh-darwin: Require a non-shared host configuration to enable mdynamic-no-pic where that is supported.	3 years ago
Iain Sandoe	3c4e12ba88	Darwin, config: Revise host config fragment. There were two uses for the Darwin host config fragment: The first is to arrange for targets that support mdynamic-no-pic to be built with that enabled (since it makes a significant difference to the compiler performance). We can be more specific in the application of this, since it only applies to 32b hosts plus powerpc64-darwin9. The second was to work around a tool bug where -fno-PIE was not propagated to the link stage. This second use is redundant, since the buggy toolchain cannot bootstrap current GCC sources anyway. This makes the host fragment more specific and reduces the number of toolchains for which it is included which reduces clutter in configure lines. Signed-off-by: Iain Sandoe <iain@sandoe.co.uk> config/ * mh-darwin: Make this specific to handling the mdynamic-no-pic case.	3 years ago
LIU Hao	3a712247e2	gcc: Add 'mcf' thread model support from mcfgthread This patch adds the new thread model `mcf`, which implements mutexes and condition variables with the mcfgthread library. Source code for mcfgthread is available at <https://github.com/lhmouse/mcfgthread>. config/ * gthr.m4 (GCC_AC_THREAD_HEADER): Add new case for `mcf` thread model	3 years ago
Andrew Pinski	9f2c14223f	Fix PR bootstrap/102389: --with-build-config=bootstrap-lto is broken So the problem here is that now the lto-plugin requires NM that works with LTO to work so we need to pass down NM just like we do for ranlib and ar. config/ * bootstrap-lto-lean.mk: Handle NM like RANLIB AND AR. * bootstrap-lto.mk: Likewise.	3 years ago
Martin Liska	83e8a1eff6	32-bit PA-RISC with HP-UX: remove deprecated ports * configure.ac: Drop GCC configury for hpux10 * configure: Likewise. config/ * mh-pa-hpux10: Drop.	4 years ago
Iain Sandoe	b8326e1c4a	configure: Account CXXFLAGS in gcc-plugin.m4. We now use a C++ compiler so that we need to process CXXFLAGS as well as CFLAGS in the gcc-plugin config fragment. Signed-off-by: Iain Sandoe <iain@sandoe.co.uk> config/ * gcc-plugin.m4: Save and process CXXFLAGS.	3 years ago
David Seifert	46335e8e4d	configure: use OBJDUMP determined by libtool [PR95648] $ac_cv_prog_OBJDUMP contains the --host OBJDUMP that libtool has inferred. Current config/gcc-plugin.m4 does not respect the user's choice for OBJDUMP. config/ * gcc-plugin.m4: Use libtool's $ac_cv_prog_OBJDUMP.	3 years ago
Alan Modra	6f3674d7e5	Merge config/picflag.m4 from gcc and regen libiberty/configure	3 years ago
Nick Clifton	a72b07181d	Add markers for 2.40 branch	3 years ago
Weimin Pan	19e559f1c9	libsframe: add the SFrame library libsframe is a library that allows you to: - decode a .sframe section - probe and inspect a .sframe section - encode (and eventually write) a .sframe section. This library is currently being used by the linker, readelf, objdump. This library will also be used by the SFrame unwinder which is still to be upstream'd. The file include/sframe-api.h defines the user-facing APIs for decoding, encoding and probing .sframe sections. A set of error codes together with their error message strings are also defined. Endian flipping is performed automatically at read and write time, if cross-endianness is detected. ChangeLog: * Makefile.def: Add libsframe as new module with its dependencies. * Makefile.in: Regenerated. * binutils/Makefile.am: Add libsframe. * binutils/Makefile.in: Regenerated. * configure: Regenerated * configure.ac: Add libsframe to host_libs. * libsframe/Makefile.am: New file. * libsframe/Makefile.in: New file. * libsframe/aclocal.m4: New file. * libsframe/config.h.in: New file. * libsframe/configure: New file. * libsframe/configure.ac: New file. * libsframe/sframe-error.c: New file. * libsframe/sframe-impl.h: New file. * libsframe/sframe.c: New file. include/ChangeLog: * sframe-api.h: New file. testsuite/ChangeLog: * libsframe/testsuite/Makefile.am: New file. * libsframe/testsuite/Makefile.in: Regenerated. * libsframe/testsuite/libsframe.decode/Makefile.am: New file. * libsframe/testsuite/libsframe.decode/Makefile.in: Regenerated. * libsframe/testsuite/libsframe.decode/decode.exp: New file. * libsframe/testsuite/libsframe.encode/Makefile.am: Likewise. * libsframe/testsuite/libsframe.encode/Makefile.in: Regenerated. * libsframe/testsuite/libsframe.encode/encode.exp: New file. * libsframe/testsuite/libsframe.encode/encode-1.c: Likewise. * libsframe/testsuite/libsframe.decode/be-flipping.c: Likewise. * libsframe/testsuite/libsframe.decode/frecnt-1.c: Likewise. * libsframe/testsuite/libsframe.decode/frecnt-2.c: Likewise. * libsframe/testsuite/libsframe.decode/DATA-BE: New file. * libsframe/testsuite/libsframe.decode/DATA1: Likewise. * libsframe/testsuite/libsframe.decode/DATA2: Likewise.	3 years ago
Christophe Lyon	200164d467	configure: require libzstd >= 1.4.0 gas uses ZSTD_compressStream2 which is only available with libzstd >= 1.4.0, leading to build errors when an older version is installed. This patch updates the check libzstd presence to check its version is >= 1.4.0. However, since gas seems to be the only component requiring such a recent version this may imply that we disable ZSTD support for all components although some would still benefit from an older version. I ran 'autoreconf -f' in all directories containing a configure.ac file, using vanilla autoconf-2.69 and automake-1.15.1. I noticed several errors from autoheader in readline, as well as warnings in intl, but they are unrelated to this patch. This should fix some of the buildbots. OK for trunk? Thanks, Christophe	4 years ago
Alan Modra	b95bb5267e	Re: Merge configure.ac from gcc project Also copy over config.acx.m4, and regenerate.	4 years ago
Alan Modra	228cf97dd3	Merge configure.ac from gcc project To merge with gcc's copy of configure.ac we need to revert changes to configure.ac in the following gcc commits: dc832fb39fc0 2022-08-25 fc259b522c0f 2022-06-25 Then reapply configure.ac changes in binutils from these binutils commits: `50ad1254d5` 2021-01-09 `bb368aad29` 2022-03-11 `e5f2f7d901` 2022-07-26 `2cac01e3ff` 2022-09-26 Plus copy over gcc's config/ax_cxx_compile_stdcxx.m4, then regenerate configure.	4 years ago
Alan Modra	67d1991b78	egrep in binutils Apparently some distros have a nagging egrep that helpfully tells you egrep is deprecated and to use "grep -E". The nag message causes a ld testsuite failure. What's more the advice isn't that good. The "-E" flag may not be available with older versions of grep. This patch fixes bare invocation of egrep within binutils, replacing it with the autoconf $EGREP or with grep. config/ * lib-ld.m4 (AC_LIB_PROG_LD_GNU): Require AC_PROG_EGREP and invoke $EGREP. (AC_LIB_PROG_LD): Likewise. binutils/ * configure: Regenerate. * embedspu.sh: Replace egrep with grep. gold/ * testsuite/Makefile.am (flagstest_compress_debug_sections.check): Replace egrep with grep. * testsuite/Makefile.in: Regenerate. * testsuite/bnd_ifunc_1.sh: Replace egrep with $EGREP. * testsuite/bnd_ifunc_2.sh: Likewise. * testsuite/bnd_plt_1.sh: Likewise. * testsuite/discard_locals_test.sh: Likewise. * testsuite/gnu_property_test.sh: Likewise. * testsuite/no_version_test.sh: Likewise. * testsuite/pr18689.sh: Likewise. * testsuite/pr26936.sh: Likewise. * testsuite/retain.sh: Likewise. * testsuite/split_i386.sh: Likewise. * testsuite/split_s390.sh: Likewise. * testsuite/split_x32.sh: Likewise. * testsuite/split_x86_64.sh: Likewise. * testsuite/ver_test_pr16504.sh: Likewise. intl/ * configure: Regenerate. ld/ * testsuite/ld-elfvers/vers.exp (test_ar): Replace egrep with grep.	4 years ago
Fangrui Song	2cac01e3ff	binutils, gdb: support zstd compressed debug sections PR29397 PR29563: Add new configure option --with-zstd which defaults to auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support zstd compressed debug sections for most tools. * bfd: for addr2line, objdump --dwarf, gdb, etc * gas: support --compress-debug-sections=zstd * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd * objcopy: support ELFCOMPRESS_ZSTD input for --decompress-debug-sections and --compress-debug-sections=zstd * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd symbols, so gdb has to link against -lzstd in this patch. If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this is too heavyweight, so don't do it for now. ``` % ld/ld-new a.o ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... % ld/ld-new a.o --compress-debug-sections=zstd ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support % binutils/objcopy --compress-debug-sections=zstd a.o b.o binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support % binutils/objcopy b.o --decompress-debug-sections binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... ```	4 years ago
Nick Clifton	0bd0932314	Add markers for 2.39 branch	4 years ago
Christophe Lyon	a55dfbb9ab	Merge config/ changes from GCC, to enable DFP on AArch64 2022-04-28 Christophe Lyon <christophe.lyon@arm.com> config/ * dfp.m4 (enable_decimal_float): Enable BID for AArch64. libdecnumber/ * configure: Regenerate.	4 years ago
Nick Clifton	a74e1cb344	Add markers for 2.38 branch	4 years ago
Mike Frysinger	1d5269c994	unify 64-bit bfd checks Move the 64-bit bfd logic out of bfd/configure.ac and into bfd64.m4 under config so it can be shared between all the other subdirs. This replaces want64 with enable_64_bit_bfd which was already being declared, but not used directly.	4 years ago
John Ericson	ab4f385b3c	Deprecate a.out support for NetBSD targets. As discussed previously, a.out support is now quite deprecated, and in some cases removed, in both Binutils itself and NetBSD, so this legacy default makes little sense. `netbsdelf` and `netbsdaout` still work allowing the user to be explicit about there choice. Additionally, the configure script warns about the change as Nick Clifton requested. One possible concern was the status of NetBSD on NS32K, where only a.out was supported. But per [1] NetBSD has removed support, and if it were to come back, it would be with ELF. The binutils implementation is therefore marked obsolete, per the instructions in the last message. With that patch and this one applied, I have confirmed the following: --target=i686-unknown-netbsd --target=i686-unknown-netbsdelf builds completely --target=i686-unknown-netbsdaout properly fails because target is deprecated. --target=vax-unknown-netbsdaout builds completely except for gas, where the target is deprecated. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html --- bfd/config.bfd \| 43 +++++++++++++-------- bfd/configure.ac \| 5 +-- binutils/testsuite/binutils-all/nm.exp \| 2 +- binutils/testsuite/lib/binutils-common.exp \| 7 +--- config/picflag.m4 \| 4 +- gas/configure.tgt \| 9 +++-- gas/testsuite/gas/arm/blx-bl-convert.d \| 2 +- gas/testsuite/gas/arm/blx-local-thumb.d \| 2 +- gas/testsuite/gas/sh/basic.exp \| 2 +- gdb/configure.host \| 34 +++++++---------- gdb/configure.tgt \| 2 +- gdb/testsuite/gdb.asm/asm-source.exp \| 6 +-- intl/configure \| 2 +- ld/configure.tgt \| 44 +++++++++++----------- ld/testsuite/ld-arm/arm-elf.exp \| 4 +- ld/testsuite/ld-elf/elf.exp \| 2 +- ld/testsuite/ld-elf/shared.exp \| 4 +- libiberty/configure \| 4 +-	5 years ago
Nick Clifton	514192487e	Add markers for 2.37 branch	5 years ago
Michael Forney	90d3edf016	GNU gettext introduced this change[0] in version 0.19.8 to fix gettext detection with musl libc, since it does not define these internal symbols. This allows binutils to build with musl gettext rather than falling back to the bundled version. [0] https://git.savannah.gnu.org/gitweb/?p=gettext.git;a=commit;h=b67399b4 2021-06-13 Michael Forney <mforney@mforney.org> config/ChangeLog: * gettext.m4 (AM_GNU_GETTEXT): Skip checks for the internal symbols _nl_msg_cat_cntr, _nl_domain_bindings, and _nl_expand_alias, if __GNU_GETTEXT_SUPPORTED_REVISION is defined. Backport of gettext serial 68 patch. intl/ChangeLog: * configure: Regenerate. --- Thi	5 years ago
Mike Frysinger	19fa7881a9	config: delete unused sim macros Nothing in gcc or binutils or gdb or anything anywhere uses these. config/ * acinclude.m4 (CYG_AC_PATH_SIM, CYG_AC_PATH_DEVO): Delete.	5 years ago
H.J. Lu	538c15fc2a	GCC_CET_HOST_FLAGS: Check if host supports multi-byte NOPs Check if host supports multi-byte NOPs before enabling CET on host. config/ PR binutils/27397 * cet.m4 (GCC_CET_HOST_FLAGS): Check if host supports multi-byte NOPs. libiberty/ PR binutils/27397 * configure: Regenerated.	5 years ago
Mike Frysinger	adeab0c5b3	config/debuginfod: do not include pkg.m4 directly Any code using AC_DEBUGINFOD from this dir is using -I../config when running aclocal, so an explicit include on pkg.m4 is unnecessary: aclocal will find the pkg.m4 in this dir just as easily. This is seen in the only two dirs that use AC_DEBUGINFOD (binutils & gdb) as their aclocal.m4 already has m4_include on config m4 files. The include as written only works if aclocal is run on a dir that is at the same level of config/. Any other depth will fail. ./ \|-- config/ \|-- binutils/ # works \|-- gdb/ # works `-- sim/ # works `-- <port>/ # fails It fails even if AC_DEBUGINFOD itself isn't used: sim/bfin/ $ aclocal -I../../config aclocal-1.15: error: ../../config/debuginfod.m4:8: file '../config/pkg.m4' does not exist	5 years ago
H.J. Lu	d546b61084	Implement a workaround for GNU mak jobserver Compiling binutils using -flto=jobserver with GCC 11 leads to libtool: link: gcc -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Wwrite-strings -I../../gas/../zlib -g -O2 -fprofile-generate -flto=jobserver -o as-new app.o as.o atof-generic.o compress-debug.o cond.o depend.o dwarf2dbg.o dw2gencfi.o ecoff.o ehopt.o expr.o flonum-copy.o flonum-konst.o flonum-mult.o frags.o hash.o input-file.o input-scrub.o listing.o literal.o macro.o messages.o output-file.o read.o remap.o sb.o stabs.o subsegs.o symbols.o write.o config/tc-i386.o config/obj-elf.o config/atof-ieee.o ../opcodes/.libs/libopcodes.a ../bfd/.libs/libbfd.a -L/tmp/binutils-gdb/objdir/zlib -lz ../libiberty/libiberty.a -ldl lto-wrapper: warning: jobserver is not available: '--jobserver-auth=' is not present in 'MAKEFLAGS' since the '+' is missing on the recipe line in Makefiles generated by automake. Add the '+' to the recipe line by hand. bfd/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. binutils/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. config/ PR binutils/26792 * jobserver.m4: New file. gas/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. gprof/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. ld/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. libctf/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. opcodes/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise.	5 years ago
H.J. Lu	03c02f3116	GCC: Check if AR works with --plugin and rc AR from older binutils doesn't work with --plugin and rc: [hjl@gnu-cfl-2 bin]$ touch foo.c [hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c [hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c ./ar: no operation specified [hjl@gnu-cfl-2 bin]$ ./ar --version GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112 Copyright (C) 2018 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License version 3 or (at your option) any later version. This program has absolutely no warranty. [hjl@gnu-cfl-2 bin]$ Check if AR works with --plugin and rc before passing --plugin to AR and RANLIB. PR ld/27173 * configure: Regenerated. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with --plugin and rc before enabling --plugin. config/ PR ld/27173 * gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with --plugin and rc before enabling --plugin. libiberty/ PR ld/27173 * configure: Regenerated. zlib/ PR ld/27173 * configure: Regenerated.	5 years ago
H.J. Lu	50ad1254d5	GCC: Pass --plugin to AR and RANLIB Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * aclocal.m4: Include ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * configure: Regenerated. zlib/ * configure: Regenerated.	5 years ago
Nick Clifton	055bc77a80	Add Changelog entries and NEWS entries for 2.36 branch	5 years ago
Alan Modra	f9a6a8f09d	PR27116, Spelling errors found by Debian style checker PR 27116 bfd/ * xcofflink.c: Correct spelling in comments. binutils/ * coffgrok.c (do_type): Correct spelling of auxiliary in errors. * doc/binutils.texi: Correct grammar. * readelf.c (process_version_sections): Correct spelling of auxiliary in warning. * testsuite/binutils-all/vax/objdump.exp: Comment grammar fix. config/ * override.m4: Correct comment grammar. gas/ * config/tc-i386.c: Correct comment spelling. * config/tc-riscv.c: Likewise. * config/tc-s390.c: Correct comment grammar. * doc/c-i386.texi: Correct spelling. * doc/c-s390.texi: Correct grammar. gold/ * tilegx.cc: Correct comment spelling. gprof/ * README: Correct grammar. * gprof.texi: Likewise. include/ * coff/internal.h: Correct comment spelling. * coff/sym.h: Likewise. * opcode/aarch64.h: Likewise. ld/ * configure.tgt: Correct comment grammar. * emultempl/m68hc1xelf.em: Likewise. * ld.texi: Correct grammar.	5 years ago
Alan Modra	7ade7fba75	sync libiberty from gcc config/ Sync from gcc 2020-07-15 H.J. Lu <hjl.tools@gmail.com> PR bootstrap/96202 * cet.m4 (GCC_CET_HOST_FLAGS): Don't enable CET without CET support in stage1 nor for build support. libiberty/ * configure: Regenerate. Sync from gcc 2020-09-08 Alan Modra <amodra@gmail.com> * d-demangle.c: Include limits.h. (ULONG_MAX, UINT_MAX): Provide fall-back definition. (dlang_number): Simplify and correct overflow test. Only write ret on returning non-NULL. Make "ret" an unsigned long. Only succeed for result of [0,UINT_MAX]. (dlang_decode_backref): Simplify and correct overflow test. Only write ret on returning non-NULL. Only succeed for result [1,MAX_LONG]. (dlang_backref): Remove now unnecessary range check. (dlang_symbol_name_p): Likewise. (string_need): Take a size_t n arg, and use size_t tem. (string_append): Use size_t n. (string_appendn, string_prependn): Take a size_t n arg. (TEMPLATE_LENGTH_UNKNOWN): Define as -1UL. (dlang_lname, dlang_parse_template): Take an unsigned long len arg. (dlang_symbol_backref, dlang_identifier, dlang_parse_integer), (dlang_parse_integer, dlang_parse_string), (dlang_parse_arrayliteral, dlang_parse_assocarray), (dlang_parse_structlit, dlang_parse_tuple), (dlang_template_symbol_param, dlang_template_args): Use unsigned long variables. testsuite/d-demangle-expected: Add new tests. 2020-08-04 Iain Buclaw <ibuclaw@gdcproject.org> * d-demangle.c (dlang_function_args): Handle 'in' and 'in ref' parameter storage classes. (dlang_type): Remove identifier type. * testsuite/d-demangle-expected: Update tests. 2020-08-03 Richard Biener <rguenther@suse.de> PR lto/96385 * simple-object-elf.c (simple_object_elf_copy_lto_debug_sections): Localize global UNDEFs and reuse the prevailing name. 2020-07-10 Ian Lance Taylor <iant@golang.org> PR demangler/96143 * cp-demangle.c (d_lambda): Don't add substitution candidate. * testsuite/demangle-expected: Update a few existing test cases accordingly, and add a new test case. 2020-07-04 Jason Merrill <jason@redhat.com> * cp-demangle.c (cplus_demangle_operators): Add di, dx, dX. (d_expression_1): Handle di and dX. (is_designated_init, d_maybe_print_designated_init): New. (d_print_comp_inner): Use d_maybe_print_designated_init. * testsuite/demangle-expected: Add designator tests. 2020-06-25 Nick Clifton <nickc@redhat.com> * bsearch.c (bsearch): Remove use of register keyword. * bsearch_r.c (bsearch_r): Likewise.	6 years ago
Rainer Orth	c8693053f8	Unify Solaris procfs and largefile handling GDB currently doesn't build on 32-bit Solaris: * On Solaris 11.4/x86: In file included from /usr/include/sys/procfs.h:26, from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24: /usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment" #error "Cannot use procfs in the large file compilation environment" ^~~~~ * On Solaris 11.3/x86 there are several more instances of this. The interaction between procfs and large-file support historically has been a royal mess on Solaris: * There are two versions of the procfs interface: The old ioctl-based /proc, deprecated and not used any longer in either gdb or binutils. The `new' (introduced in Solaris 2.6, 1997) structured /proc. * There are two headers one can possibly include: <procfs.h> which only provides the structured /proc, definining _STRUCTURED_PROC=1 and then including ... <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based /proc, but provides structured /proc if _STRUCTURED_PROC == 1. * procfs and the large-file environment didn't go well together: Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit compilations when the large-file environment was active (_FILE_OFFSET_BITS == 64). In both Solaris 11.4 and Illumos, this restriction was lifted for structured /proc. So one has to be careful always to define _STRUCTURED_PROC=1 when testing for or using <sys/procfs.h> on Solaris. As the errors above show, this isn't always the case in binutils-gdb right now. Also one may need to disable large-file support for 32-bit compilations on Solaris. config/largefile.m4 meant to do this by wrapping the AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because it neglects the _STRUCTURED_PROC part. To make things even worse, since GCC 9 g++ predefines _FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to enable large-file support, this has no effect, breaking the gdb build. This patch addresses all this as follows: * All tests for the <sys/procfs.h> header are made with _STRUCTURED_PROC=1, the definition going into the various config.h files instead of having to make them (and sometimes failing) in the affected sources. * To cope with the g++ predefine of _FILE_OFFSET_BITS=64, -U_FILE_OFFSET_BITS is added to various _CPPFLAGS variables. It had been far easier to have just #undef _FILE_OFFSET_BITS in config.h, but unfortunately such a construct in config.in is commented by config.status irrespective of indentation and whitespace if large-file support is disabled. I found no way around this and putting the #undef in several global headers for bfd, binutils, ld, and gdb seemed way more invasive. Last, the applicability check in largefile.m4 was modified only to disable largefile support if really needed. To do so, it checks if <sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it doesn't, the disabling only happens if gdb exists in-tree and isn't disabled, otherwise (building binutils from a tarball), there's no conflict. What initially confused me was the check for $plugins here, which originally caused the disabling not to take place. Since AC_PLUGINGS does enable plugin support if <dlfcn.h> exists (which it does on Solaris), the disabling never happened. I could find no explanation why the linker plugin needs large-file support but thought it would be enough if gld and GCC's lto-plugin agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not enough: lto-plugin uses the simple-object interface from libiberty, which includes off_t arguments. So to fully disable large-file support would mean also disabling it in libiberty and its users: gcc and libstdc++-v3. This seems highly undesirable, so I decided to disable the linker plugin instead if large-file support won't work. The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to predefined _FILE_OFFSET_BITS=64). Also regtested on amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4), x86_64-pc-linux-gnu and i686-pc-linux-gnu. config: * largefile.m4 (ACX_LARGEFILE) <sparc--solaris\|i?86--solaris>: Check for <sys/procfs.h> incompatilibity with large-file support on Solaris. Only disable large-file support and perhaps plugins if needed. Set, substitute LARGEFILE_CPPFLAGS if so. bfd: * bfd.m4 (BFD_SYS_PROCFS_H): New macro. (BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H. Don't define _STRUCTURED_PROC. (BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise. * elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define. * configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * configure, config.in: Regenerate. * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. binutils: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gas: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gdb: * proc-api.c (_STRUCTURED_PROC): Don't define. * proc-events.c: Likewise. * proc-flags.c: Likewise. * proc-why.c: Likewise. * procfs.c: Likewise. * Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * configure, config.in: Regenerate. gdbserver: * configure, config.in: Regenerate. gdbsupport: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * Makefile.in: Regenerate. * configure, config.in: Regenerate. gnulib: * configure.ac: Run ACX_LARGEFILE before gl_EARLY. * configure: Regenerate. gprof: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate. ld: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate.	6 years ago
H.J. Lu	377170fa31	PKG_CHECK_MODULES: Properly check if $pkg_cv_[]$1[]_LIBS works There is no need to check $pkg_cv_[]$1[]_LIBS works if package check failed. config/ PR binutils/26301 * pkg.m4 (PKG_CHECK_MODULES): Use AC_TRY_LINK only if $pkg_failed = no. binutils/ PR binutils/26301 * configure: Regenerated. gdb/ PR binutils/26301 * configure: Regenerated.	6 years ago
H.J. Lu	d70f978b44	PKG_CHECK_MODULES: Check if $pkg_cv_[]$1[]_LIBS works It is quite normal to have headers without library on multilib OSes. Add AC_TRY_LINK to PKG_CHECK_MODULES to check if $pkg_cv_[]$1[]_LIBS works. config/ PR binutils/26301 * pkg.m4 (PKG_CHECK_MODULES): Add AC_TRY_LINK to check if $pkg_cv_[]$1[]_LIBS works. binutils/ PR binutils/26301 * configure: Regenerated. gdb/ PR binutils/26301 * configure: Regenerated.	6 years ago
Aaron Merey	f6720b1cfe	config/debuginfod.m4: Use PKG_CHECK_MODULES Use PKG_CHECK_MODULES to set debuginfod autoconf vars. Also add pkg.m4 to config/. ChangeLog: * config/debuginfod.m4: use PKG_CHECK_MODULES. * config/pkg.m4: New file. * configure: Rebuild. * configure.ac: Remove AC_DEBUGINFOD. ChangeLog/binutils: * Makefile.am: Replace LIBDEBUGINFOD with DEBUGINFOD_LIBS. * Makefile.in: Rebuild. * configure: Rebuild. * doc/Makefile.in: Rebuild. ChangeLog/gdb: * Makefile.in: Replace LIBDEBUGINFOD with DEBUGINFOD_LIBS. * configure: Rebuild.	6 years ago
Nick Clifton	b115b9fd3c	Add markers for binutils 2.35 branch	6 years ago
H.J. Lu	727b7b1864	Sync config, include and libiberty with GCC config/ 2020-06-24 H.J. Lu <hongjiu.lu@intel.com> Sync with GCC 2020-05-29 H.J. Lu <hjl.tools@gmail.com> PR bootstrap/95413 * cet.m4: Replace save_CFLAGS and save_LDFLAGS with cet_save_CFLAGS and cet_save_LDFLAGS. include/ 2020-06-24 H.J. Lu <hongjiu.lu@intel.com> Sync with GCC 2020-06-23 Nick Alcock <nick.alcock@oracle.com> * libiberty.h (bsearch_r): New. 2020-04-17 Martin Liska <mliska@suse.cz> Jonathan Yong <10walls@gmail.com> PR gcov-profile/94570 * filenames.h (defined): Do not define HAVE_DOS_BASED_FILE_SYSTEM for CYGWIN. libiberty/ 2020-06-23 Nick Alcock <nick.alcock@oracle.com> * bsearch_r.c: New file. * Makefile.in (CFILES): Add bsearch_r.c. (REQUIRED_OFILES): Add bsearch_r.o. * functions.texi: Regenerate. 2020-05-29 H.J. Lu <hjl.tools@gmail.com> PR bootstrap/95413 * configure: Regenerated. 2020-05-15 Iain Buclaw <ibuclaw@gdcproject.org> * d-demangle.c (dlang_attributes): Add @live attribute. * testsuite/d-demangle-expected: Add new tests. 2020-05-14 Rainer Schuetze <r.sagitario@gmx.de> Iain Buclaw <ibuclaw@gdcproject.org> * d-demangle.c (enum dlang_symbol_kinds): Remove enum. (struct dlang_info): New struct (dlang_decode_backref): New function. (dlang_backref): New function. (dlang_symbol_backref): New function. (dlang_type_backref): New function. (dlang_symbol_name_p): New function. (dlang_function_type_noreturn): New function. (dlang_function_type): Add 'info' parameter. Decode function type with dlang_function_type_noreturn. (dlang_function_args): Add 'info' parameter. (dlang_type): Add 'info' parameter. Handle back referenced types. (dlang_identifier): Replace 'kind' parameter with 'info'. Handle back referenced symbols. Split off decoding of plain identifiers to... (dlang_lname): ...here. (dlang_parse_mangle): Replace 'kind' parameter with 'info'. Decode function type and return with dlang_type. (dlang_parse_qualified): Replace 'kind' parameter with 'info', add 'suffix_modifier' parameter. Decode function type with dlang_function_type_noreturn. (dlang_parse_tuple): Add 'info' parameter. (dlang_template_symbol_param): New function. (dlang_template_args): Add 'info' parameter. Decode symbol parameter with dlang_template_symbol_param. Handle back referenced values, and externally mangled parameters. (dlang_parse_template): Add 'info' parameter. (dlang_demangle_init_info): New function. (dlang_demangle): Initialize and pass 'info' parameter. * testsuite/d-demangle-expected: Add new tests.	6 years ago
H.J. Lu	56770bdab2	Sync config with GCC Sync with GCC 2020-05-15 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/95147 * cet.m4 (GCC_CET_FLAGS): Also check if -fcf-protection works when defaulting to auto. 2020-05-14 H.J. Lu <hongjiu.lu@intel.com> * cet.m4 (GCC_CET_FLAGS): Change default to auto.	6 years ago
H.J. Lu	90d00bbd9c	Sync config and libiberty with GCC config/ PR bootstrap/94998 * cet.m4 (GCC_CET_HOST_FLAGS): Enable CET in cross compiler if possible. libiberty/ PR bootstrap/94998 * configure: Regenerated.	6 years ago
H.J. Lu	87c66b2e70	Sync config and libiberty with GCC config/ 2020-04-29 H.J. Lu <hongjiu.lu@intel.com> Sync with GCC 2020-04-28 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/94739 * cet.m4 (GCC_CET_HOST_FLAGS): Add -fcf-protection=none to -Wl,-z,ibt,-z,shstk. Check whether -fcf-protection=none -Wl,-z,ibt,-z,shstk works first. 2020-04-25 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/94739 * cet.m4 (GCC_CET_HOST_FLAGS): New. 2020-04-22 Jakub Jelinek <jakub@redhat.com> PR libfortran/94694 PR libfortran/94586 * math.m4 (GCC_CHECK_MATH_INLINE_BUILTIN_FALLBACK1, GCC_CHECK_MATH_INLINE_BUILTIN_FALLBACK2): New. libiberty/ 2020-04-28 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/94739 * configure: Regenerated.	6 years ago
Andrew Burgess	9f1528a1bd	Merge changes from GCC for the config/ directory GCC's config/ChangeLog since the last time this merge was done (in the binutils-gdb commit `0b4d000cc4`) is included at the end of this commit message. It is worth noting that the binutils-gdb commit `301a9420d9` added the file config/debuginfod.m4 which is not present in GCC's config/ directory. This file is preserved, unmodified, after this commit. In order to regenerate all of the configure files, I configured with --enable-maintainer-mode, and built the 'all' target. I then did the same thing on a source tree without this patch, and only committed those files that changed when this patch was added. GCC's config/ChangeLog entries: 2020-02-12 Sandra Loosemore <sandra@codesourcery.com> PR libstdc++/79193 PR libstdc++/88999 * no-executables.m4: Use a non-empty program to test for linker support. 2020-02-01 Andrew Burgess <andrew.burgess@embecosm.com> * lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax. 2020-01-27 Andrew Burgess <andrew.burgess@embecosm.com> * lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new --with-libXXX-type=... option. Use this to guide the selection of either a shared library or a static library. 2020-01-24 Maciej W. Rozycki <macro@wdc.com> * toolexeclibdir.m4: New file. 2019-09-10 Christophe Lyon <christophe.lyon@st.com> * futex.m4: Handle -uclinux. * tls.m4 (GCC_CHECK_TLS): Likewise. 2019-09-06 Florian Weimer <fweimer@redhat.com> * futex.m4 (GCC_LINUX_FUTEX): Include <unistd.h> for the syscall function. 2019-07-08 Richard Sandiford <richard.sandiford@arm.com> * bootstrap-Og.mk: New file. 2019-06-25 Kwok Cheung Yeung <kcy@codesourcery.com> Andrew Stubbs <ams@codesourcery.com> * gthr.m4 (GCC_AC_THREAD_HEADER): Add case for gcn. 2019-05-30 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> * ax_count_cpus.m4: New file. 2019-05-02 Richard Biener <rguenther@suse.de> PR bootstrap/85574 * bootstrap-lto.mk (extra-compare): Set to gcc/lto1$(exeext). 2019-04-16 Martin Liska <mliska@suse.cz> * bootstrap-lto-lean.mk: Filter out -flto in STAGEtrain_CFLAGS. 2019-04-09 Martin Liska <mliska@suse.cz> * bootstrap-lto-lean.mk: New file. 2019-03-02 Johannes Pfau <johannespfau@gmail.com> * mh-mingw: Also set __USE_MINGW_ACCESS flag for C++ code. 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. config/ChangeLog: * ax_count_cpus.m4: New file, backported from GCC. * bootstrap-Og.mk: New file, backported from GCC. * bootstrap-lto-lean.mk: New file, backported from GCC. * bootstrap-lto.mk: Changes backported from GCC. * futex.m4: Changes backported from GCC. * gthr.m4: Changes backported from GCC. * lib-link.m4: Changes backported from GCC. * mh-mingw: Changes backported from GCC. * no-executables.m4: Changes backported from GCC. * tls.m4: Changes backported from GCC. * toolexeclibdir.m4: New file, backported from GCC. binutils/ChangeLog: * configure: Regenerate. gdb/ChangeLog: * configure: Regenerate. gdbserver/ChangeLog: * configure: Regenerate. gdbsupport/ChangeLog: * configure: Regenerate. intl/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. zlib/ChangeLog.bin-gdb: * configure: Regenerate.	6 years ago
Nick Clifton	ae77468624	Add markers for 2.34 branch to the NEWS files and ChangeLogs.	6 years ago
Aaron Merey	301a9420d9	Add support for debuginfod to the binutils (disable by default, enabled via a configure time option). debuginfod is a lightweight web service that indexes ELF/DWARF debugging resources by build-id and serves them over HTTP. This patch enables objdump and readelf to query debuginfod servers when they are otherwise not able to find separate debug files. Binutils can be built with debuginfod using the --with-debuginfod configure option. This requires that libdebuginfod be installed and found at configure time. debuginfod is packaged with elfutils, starting with version 0.178. For more information see https://sourceware.org/elfutils/. toplevel* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds new configure option --with-debuginfod. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD. binutils* Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod. * Makefile.in: Regenerate. * NEWS: Update. * config.in: Regenerate. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD. * doc/Makefile.in: Regenerate. * doc/binutils.texi: Add section on using binutils with debuginfod. * dwarf.c (debuginfod_fetch_separate_debug_info): New function. Query debuginfod servers for the target debug file. (load_separate_debug_info): Call debuginfod_fetch_separate_debug_info if configured with debuginfod. (load_separate_debug_files): Add file argument to load_separate_debug_info calls. * dwarf.h (get_build_id): Add declaration. * objdump.c (get_build_id): New function. Get build-id of file. * readelf.c (get_build_id): Likewise. * testsuite/binutils-all/debuginfod.exp: New tests. * testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id section.	6 years ago
Phil Blundell	60391a255b	Add markers for 2.33 branch to NEWS and ChangeLog files.	7 years ago
Nick Clifton	f974f26cb1	Add markers for 2.32 branch to NEWS and ChangeLog files.	7 years ago
Hafiz Abid Qadeer	5d762de01c	Fix a typo in iconv.m4. config/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * iconv.m4 (AM_ICONV_LINK): Don't overwrite CPPFLAGS. Append $INCICONV to it. gdb/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * configure: Regenerate. binutils/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * configure: Regenerate. intl/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * configure: Regenerate.	8 years ago

1 2 3 4 5 ...

292 Commits (f3f6c0df60c4e8a6c3409db4f23f2cdec5a9d41c)