binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Joel Brobecker	3666a04883	Update copyright year range in all GDB files This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.	5 years ago
Michael Weghorn	7dbfcd6f79	gdbsupport: Drop now unused function 'stringify_argv' The function did not properly escape special characters and all uses have been replaced in previous commits, so drop the now unused function. gdbsupport/ChangeLog: * common-utils.cc, common-utils.h (stringify_argv): Drop now unused function stringify_argv Change-Id: Id5f861f44eae1f0fbde3476a5eac23a842ed04fc	6 years ago
Tom Tromey	01027315f5	Move gdbsupport to the top level This patch moves the gdbsupport directory to the top level. This is the next step in the ongoing project to move gdbserver to the top level. The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport". This patch then adds a build system to gdbsupport and wires it into the top level. Then it changes gdb to use the top-level build. gdbserver, on the other hand, is not yet changed. It still does its own build of gdbsupport. ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport. * MAINTAINERS: Add gdbsupport. * configure: Rebuild. * configure.ac (configdirs): Add gdbsupport. * gdbsupport: New directory, move from gdb/gdbsupport. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * nat/x86-linux-dregs.c: Include configh.h. * nat/linux-ptrace.c: Include configh.h. * nat/linux-btrace.c: Include configh.h. * defs.h: Include config.h, bfd.h. * configure.ac: Don't source common.host. (CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files. * configure: Rebuild. * acinclude.m4: Update path. * Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables. (CONFIG_SRC_SUBDIR): Remove gdbsupport. (INTERNAL_CFLAGS_BASE): Add INCSUPPORT. (CLIBS): Add LIBSUPPORT. (CDEPS): Likewise. (COMMON_SFILES): Remove gdbsupport files. (HFILES_NO_SRCDIR): Likewise. (stamp-version): Update path to create-version.sh. (ALLDEPFILES): Remove gdbsupport files. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * server.h: Include config.h. * gdbreplay.c: Include config.h. * configure: Rebuild. * configure.ac: Don't source common.host. * acinclude.m4: Update path. * Makefile.in (INCSUPPORT): New variable. (INCLUDE_CFLAGS): Add INCSUPPORT. (SFILES): Update paths. (version-generated.c): Update path to create-version.sh. (gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * common-defs.h: Add GDBSERVER case. Update includes. * acinclude.m4, aclocal.m4, config.in, configure, configure.ac, Makefile.am, Makefile.in, README: New files. * Moved from ../gdb/gdbsupport/ Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78	7 years ago
Joel Brobecker	b811d2c292	Update copyright year range in all GDB files. gdb/ChangeLog: Update copyright year range in all GDB files.	6 years ago
Christian Biesinger	b231e86ac9	Use strerror_r in safe_strerror if available Also stores the result in a thread-local static variable and changes the return value to a const char. This is already important because Guile creates threads and Python can create threads, but with the patch series here: https://gnutoolchain-gerrit.osci.io/r/c/binutils-gdb/+/176 GDB itself will create threads, too. gdb/ChangeLog: 2019-10-31 Christian Biesinger <cbiesinger@google.com> configure: Regenerate. * configure.ac: Check for strerror_r. * gdbsupport/common-utils.h (safe_strerror): Change return value to const char * and document that this function is now threadsafe. * gdbsupport/posix-strerror.c (safe_strerror): Make buf thread_local and call strerror_r, if available. * utils.c (perror_string): Update. (print_sys_errmsg): Update. Change-Id: I81048fbaf148035c221c528727f7efe58ba528eb	7 years ago
Christian Biesinger	87f34879e5	Add a string_view version of startswith Makes sure that the string is longer than prefix, so that strncmp will do the right thing even if the string is not null-terminated. For use in my string_view conversion patch: https://sourceware.org/ml/gdb-patches/2019-10/msg00030.html https://gnutoolchain-gerrit.osci.io/r/c/binutils-gdb/+/125 gdb/ChangeLog: 2019-10-28 Christian Biesinger <cbiesinger@google.com> * gdbsupport/common-utils.h (startswith): Add an overloaded version that takes gdb::string_view arguments. Change-Id: I5389855de2fd70e7065a789a79374b0693651b71	7 years ago
Simon Marchi	2377111731	gdb: Make startswith return a bool gdb/ChangeLog: * gdbsupport/common-utils.h (startswith): Change return type to bool. Change-Id: I1c11b9bb7f89b3885c1bb55097adb5be6d333ad4	7 years ago
Andrew Burgess	021d8588f6	gdb: Allow quoting around string options in the gdb::option framework Currently string options must be a single string with no whitespace, this limitation prevents the gdb::option framework being used in some places. After this commit, string options can be quoted in single or double quotes, and quote characters can be escaped with a backslash if needed to either place them within quotes, or to avoid starting a quoted argument. This test adds a new function extract_string_maybe_quoted which is basically a copy of extract_arg_maybe_quoted from cli/cli-utils.c, however, the cli-utils.c function will be deleted in the next commit. There are tests to exercise the new quoting mechanism. gdb/ChangeLog: * cli/cli-option.c (parse_option): Use extract_string_maybe_quoted to extract string arguments. * common/common-utils.c (extract_string_maybe_quoted): New function. * common/common-utils.h (extract_string_maybe_quoted): Declare. gdb/testsuite/ChangeLog: * gdb.base/options.exp (expect_string): Dequote strings in results. (test-string): Test strings with different quoting and reindent.	7 years ago
Tom Tromey	268a13a5a3	Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.	7 years ago
Tom Tromey	1a5c25988e	Normalize include guards in gdb While working on my other scripts to deal with gdb headers, I noticed that some files were missing include guards. I wrote a script to add the missing ones, but found that using the obvious names for the guards ran into clashes -- for example, gdb/nat/linux-nat.h used "LINUX_NAT_H", but this was also the script's choice for gdb/linux-nat.h. So, I changed the script to normalize all include guards in gdb. This patch is the result. As usual the script is available here: https://github.com/tromey/gdb-refactoring-scripts Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the buildbot. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * yy-remap.h: Add include guard. * xtensa-tdep.h: Add include guard. * xcoffread.h: Rename include guard. * varobj-iter.h: Add include guard. * tui/tui.h: Rename include guard. * tui/tui-winsource.h: Rename include guard. * tui/tui-wingeneral.h: Rename include guard. * tui/tui-windata.h: Rename include guard. * tui/tui-win.h: Rename include guard. * tui/tui-stack.h: Rename include guard. * tui/tui-source.h: Rename include guard. * tui/tui-regs.h: Rename include guard. * tui/tui-out.h: Rename include guard. * tui/tui-layout.h: Rename include guard. * tui/tui-io.h: Rename include guard. * tui/tui-hooks.h: Rename include guard. * tui/tui-file.h: Rename include guard. * tui/tui-disasm.h: Rename include guard. * tui/tui-data.h: Rename include guard. * tui/tui-command.h: Rename include guard. * tic6x-tdep.h: Add include guard. * target/waitstatus.h: Rename include guard. * target/wait.h: Rename include guard. * target/target.h: Rename include guard. * target/resume.h: Rename include guard. * target-float.h: Rename include guard. * stabsread.h: Add include guard. * rs6000-tdep.h: Add include guard. * riscv-fbsd-tdep.h: Add include guard. * regformats/regdef.h: Rename include guard. * record.h: Rename include guard. * python/python.h: Rename include guard. * python/python-internal.h: Rename include guard. * python/py-stopevent.h: Rename include guard. * python/py-ref.h: Rename include guard. * python/py-record.h: Rename include guard. * python/py-record-full.h: Rename include guard. * python/py-record-btrace.h: Rename include guard. * python/py-instruction.h: Rename include guard. * python/py-events.h: Rename include guard. * python/py-event.h: Rename include guard. * procfs.h: Add include guard. * proc-utils.h: Add include guard. * p-lang.h: Add include guard. * or1k-tdep.h: Rename include guard. * observable.h: Rename include guard. * nto-tdep.h: Rename include guard. * nat/x86-linux.h: Rename include guard. * nat/x86-linux-dregs.h: Rename include guard. * nat/x86-gcc-cpuid.h: Add include guard. * nat/x86-dregs.h: Rename include guard. * nat/x86-cpuid.h: Rename include guard. * nat/ppc-linux.h: Rename include guard. * nat/mips-linux-watch.h: Rename include guard. * nat/linux-waitpid.h: Rename include guard. * nat/linux-ptrace.h: Rename include guard. * nat/linux-procfs.h: Rename include guard. * nat/linux-osdata.h: Rename include guard. * nat/linux-nat.h: Rename include guard. * nat/linux-namespaces.h: Rename include guard. * nat/linux-btrace.h: Rename include guard. * nat/glibc_thread_db.h: Rename include guard. * nat/gdb_thread_db.h: Rename include guard. * nat/gdb_ptrace.h: Rename include guard. * nat/fork-inferior.h: Rename include guard. * nat/amd64-linux-siginfo.h: Rename include guard. * nat/aarch64-sve-linux-sigcontext.h: Rename include guard. * nat/aarch64-sve-linux-ptrace.h: Rename include guard. * nat/aarch64-linux.h: Rename include guard. * nat/aarch64-linux-hw-point.h: Rename include guard. * mn10300-tdep.h: Add include guard. * mips-linux-tdep.h: Add include guard. * mi/mi-parse.h: Rename include guard. * mi/mi-out.h: Rename include guard. * mi/mi-main.h: Rename include guard. * mi/mi-interp.h: Rename include guard. * mi/mi-getopt.h: Rename include guard. * mi/mi-console.h: Rename include guard. * mi/mi-common.h: Rename include guard. * mi/mi-cmds.h: Rename include guard. * mi/mi-cmd-break.h: Rename include guard. * m2-lang.h: Add include guard. * location.h: Rename include guard. * linux-record.h: Rename include guard. * linux-nat.h: Add include guard. * linux-fork.h: Add include guard. * i386-darwin-tdep.h: Rename include guard. * hppa-linux-offsets.h: Add include guard. * guile/guile.h: Rename include guard. * guile/guile-internal.h: Rename include guard. * gnu-nat.h: Rename include guard. * gdb-stabs.h: Rename include guard. * frv-tdep.h: Add include guard. * f-lang.h: Add include guard. * event-loop.h: Add include guard. * darwin-nat.h: Rename include guard. * cp-abi.h: Rename include guard. * config/sparc/nm-sol2.h: Rename include guard. * config/nm-nto.h: Rename include guard. * config/nm-linux.h: Add include guard. * config/i386/nm-i386gnu.h: Rename include guard. * config/djgpp/nl_types.h: Rename include guard. * config/djgpp/langinfo.h: Rename include guard. * compile/gcc-cp-plugin.h: Add include guard. * compile/gcc-c-plugin.h: Add include guard. * compile/compile.h: Rename include guard. * compile/compile-object-run.h: Rename include guard. * compile/compile-object-load.h: Rename include guard. * compile/compile-internal.h: Rename include guard. * compile/compile-cplus.h: Rename include guard. * compile/compile-c.h: Rename include guard. * common/xml-utils.h: Rename include guard. * common/x86-xstate.h: Rename include guard. * common/version.h: Rename include guard. * common/vec.h: Rename include guard. * common/tdesc.h: Rename include guard. * common/selftest.h: Rename include guard. * common/scoped_restore.h: Rename include guard. * common/scoped_mmap.h: Rename include guard. * common/scoped_fd.h: Rename include guard. * common/safe-iterator.h: Rename include guard. * common/run-time-clock.h: Rename include guard. * common/refcounted-object.h: Rename include guard. * common/queue.h: Rename include guard. * common/ptid.h: Rename include guard. * common/print-utils.h: Rename include guard. * common/preprocessor.h: Rename include guard. * common/pathstuff.h: Rename include guard. * common/observable.h: Rename include guard. * common/netstuff.h: Rename include guard. * common/job-control.h: Rename include guard. * common/host-defs.h: Rename include guard. * common/gdb_wait.h: Rename include guard. * common/gdb_vecs.h: Rename include guard. * common/gdb_unlinker.h: Rename include guard. * common/gdb_unique_ptr.h: Rename include guard. * common/gdb_tilde_expand.h: Rename include guard. * common/gdb_sys_time.h: Rename include guard. * common/gdb_string_view.h: Rename include guard. * common/gdb_splay_tree.h: Rename include guard. * common/gdb_setjmp.h: Rename include guard. * common/gdb_ref_ptr.h: Rename include guard. * common/gdb_optional.h: Rename include guard. * common/gdb_locale.h: Rename include guard. * common/gdb_assert.h: Rename include guard. * common/filtered-iterator.h: Rename include guard. * common/filestuff.h: Rename include guard. * common/fileio.h: Rename include guard. * common/environ.h: Rename include guard. * common/common-utils.h: Rename include guard. * common/common-types.h: Rename include guard. * common/common-regcache.h: Rename include guard. * common/common-inferior.h: Rename include guard. * common/common-gdbthread.h: Rename include guard. * common/common-exceptions.h: Rename include guard. * common/common-defs.h: Rename include guard. * common/common-debug.h: Rename include guard. * common/cleanups.h: Rename include guard. * common/buffer.h: Rename include guard. * common/btrace-common.h: Rename include guard. * common/break-common.h: Rename include guard. * cli/cli-utils.h: Rename include guard. * cli/cli-style.h: Rename include guard. * cli/cli-setshow.h: Rename include guard. * cli/cli-script.h: Rename include guard. * cli/cli-interp.h: Rename include guard. * cli/cli-decode.h: Rename include guard. * cli/cli-cmds.h: Rename include guard. * charset-list.h: Add include guard. * buildsym-legacy.h: Rename include guard. * bfin-tdep.h: Add include guard. * ax.h: Rename include guard. * arm-linux-tdep.h: Add include guard. * arm-fbsd-tdep.h: Add include guard. * arch/xtensa.h: Rename include guard. * arch/tic6x.h: Add include guard. * arch/i386.h: Add include guard. * arch/arm.h: Rename include guard. * arch/arm-linux.h: Rename include guard. * arch/arm-get-next-pcs.h: Rename include guard. * arch/amd64.h: Add include guard. * arch/aarch64-insn.h: Rename include guard. * arch-utils.h: Rename include guard. * annotate.h: Add include guard. * amd64-darwin-tdep.h: Rename include guard. * aarch64-linux-tdep.h: Add include guard. * aarch64-fbsd-tdep.h: Add include guard. * aarch32-linux-nat.h: Add include guard. gdb/gdbserver/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * x86-tdesc.h: Rename include guard. * x86-low.h: Add include guard. * wincecompat.h: Rename include guard. * win32-low.h: Add include guard. * utils.h: Rename include guard. * tracepoint.h: Rename include guard. * tdesc.h: Rename include guard. * target.h: Rename include guard. * server.h: Rename include guard. * remote-utils.h: Rename include guard. * regcache.h: Rename include guard. * nto-low.h: Rename include guard. * notif.h: Add include guard. * mem-break.h: Rename include guard. * lynx-low.h: Add include guard. * linux-x86-tdesc.h: Add include guard. * linux-s390-tdesc.h: Add include guard. * linux-ppc-tdesc-init.h: Add include guard. * linux-low.h: Add include guard. * linux-aarch64-tdesc.h: Add include guard. * linux-aarch32-low.h: Add include guard. * inferiors.h: Rename include guard. * i387-fp.h: Rename include guard. * hostio.h: Rename include guard. * gdbthread.h: Rename include guard. * gdb_proc_service.h: Rename include guard. * event-loop.h: Rename include guard. * dll.h: Rename include guard. * debug.h: Rename include guard. * ax.h: Rename include guard.	7 years ago
Joel Brobecker	42a4f53d2b	Update copyright year range in all GDB files. This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.	7 years ago
Sergio Durigan Junior	3c025cfe5e	Move 'is_regular_file' from common-utils.c to filestuff.c There is no reason for 'is_regular_file' to be in common-utils.c; it belongs to 'filestuff.c'. This commit moves the function definition and its prototype to the appropriate files. The motivation behind this move is a failure that happens on certain cross-compilation environments when compiling the IPA library, due to the way gnulib probes the need for a 'stat' call replacement. Because configure checks when cross-compiling are more limited, gnulib decides that it needs to substitute the 'stat' calls its own 'rpl_stat'; however, the IPA library doesn't link with gnulib, which leads to an error when compiling 'common-utils.c': ... /opt/x86-core2--musl--bleeding-edge-2018.09-1/bin/i686-buildroot-linux-musl-g++ -shared -fPIC -Wl,--soname=libinproctrace.so -Wl,--no-undefined -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -I. -I. -I./../common -I./../regformats -I./.. -I./../../include -I./../gnulib/import -Ibuild-gnulib-gdbserver/import -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wunused-but-set-variable -Wno-sign-compare -Wno-narrowing -Wno-error=maybe-uninitialized -DGDBSERVER \ -Wl,--dynamic-list=./proc-service.list -o libinproctrace.so ax-ipa.o common-utils-ipa.o errors-ipa.o format-ipa.o print-utils-ipa.o regcache-ipa.o remote-utils-ipa.o rsp-low-ipa.o tdesc-ipa.o tracepoint-ipa.o utils-ipa.o vec-ipa.o linux-i386-ipa.o linux-x86-tdesc-ipa.o arch/i386-ipa.o -ldl -pthread /opt/x86-core2--musl--bleeding-edge-2018.09-1/lib/gcc/i686-buildroot-linux-musl/8.2.0/../../../../i686-buildroot-linux-musl/bin/ld: common-utils-ipa.o: in function `is_regular_file(char const, int)': common-utils.c:(.text+0x695): undefined reference to `rpl_stat' collect2: error: ld returned 1 exit status Makefile:413: recipe for target 'libinproctrace.so' failed make[1]: *** [libinproctrace.so] Error 1 ... More details can also be found at: https://sourceware.org/ml/gdb-patches/2018-09/msg00304.html The most simple fix for this problem is to move 'is_regular_file' to 'filestuff.c', which is not used by IPA. This ends up making the files more logically organized as well, since 'is_regular_file' is a file operation. No regressions found. gdb/ChangeLog: 2018-09-12 Sergio Durigan Junior <sergiodj@redhat.com> * common/common-utils.c: Don't include '<sys/stat.h>'. (is_regular_file): Move to... * common/filestuff.c (is_regular_file): ... here. * common/common-utils.h (is_regular_file): Move to... * common/filestuff.h (is_regular_file): ... here.	8 years ago
Jan Kratochvil	a3b60e4588	aarch64: PR 19806: watchpoints: false negatives + PR 20207 contiguous ones Some unaligned watchpoints were currently missed. On old kernels as specified in kernel RFE: aarch64: ptrace: BAS: Support any contiguous range (edit) https://sourceware.org/bugzilla/show_bug.cgi?id=20207 after this patch some other unaligned watchpoints will get reported as false positives. With new kernels all the watchpoints should work exactly. There may be a regresion that it now less merges watchpoints so that with multiple overlapping watchpoints it may run out of the 4 hardware watchpoint registers. But as discussed in the original thread GDB needs some generic watchpoints merging framework to be used by all the target specific code. Even current FSF GDB code does not merge it perfectly. Also with the more precise watchpoints one can technically merge them less. And I do not think it matters too much to improve mergeability only for old kernels. Still even on new kernels some better merging logic would make sense. There remains one issue: kernel-4.15.14-300.fc27.armv7hl FAIL: gdb.base/watchpoint-unaligned.exp: continue FAIL: gdb.base/watchpoint-unaligned.exp: continue (gdb) continue Continuing. Unexpected error setting watchpoint: Invalid argument. (gdb) FAIL: gdb.base/watchpoint-unaligned.exp: continue But that looks as a kernel bug to me. (1) It is not a regression by this patch. (2) It is unrelated to this patch. gdb/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> PR breakpoints/19806 and support for PR external/20207. * NEWS: Mention Aarch64 watchpoint improvements. * aarch64-linux-nat.c (aarch64_linux_stopped_data_address): Fix missed watchpoints and PR external/20207 watchpoints. * nat/aarch64-linux-hw-point.c (kernel_supports_any_contiguous_range): New. (aarch64_watchpoint_offset): New. (aarch64_watchpoint_length): Support PR external/20207 watchpoints. (aarch64_point_encode_ctrl_reg): New parameter offset, new asserts. (aarch64_point_is_aligned): Support PR external/20207 watchpoints. (aarch64_align_watchpoint): New parameters aligned_offset_p and next_addr_orig_p. Support PR external/20207 watchpoints. (aarch64_downgrade_regs): New. (aarch64_dr_state_insert_one_point): New parameters offset and addr_orig. (aarch64_dr_state_remove_one_point): Likewise. (aarch64_handle_breakpoint): Update caller. (aarch64_handle_aligned_watchpoint): Likewise. (aarch64_handle_unaligned_watchpoint): Support addr_orig and aligned_offset. (aarch64_linux_set_debug_regs): Remove const from state. Call aarch64_downgrade_regs. (aarch64_show_debug_reg_state): Print also dr_addr_orig_wp. * nat/aarch64-linux-hw-point.h (DR_CONTROL_LENGTH): Rename to ... (DR_CONTROL_MASK): ... this. (struct aarch64_debug_reg_state): New field dr_addr_orig_wp. (unsigned int aarch64_watchpoint_offset): New prototype. (aarch64_linux_set_debug_regs): Remove const from state. * utils.c (align_up, align_down): Move to ... * common/common-utils.c (align_up, align_down): ... here. * utils.h (align_up, align_down): Move to ... * common/common-utils.h (align_up, align_down): ... here. gdb/gdbserver/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * linux-aarch64-low.c (aarch64_stopped_data_address): Likewise. gdb/testsuite/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> PR breakpoints/19806 and support for PR external/20207. * gdb.base/watchpoint-unaligned.c: New file. * gdb.base/watchpoint-unaligned.exp: New file.	8 years ago
Sergio Durigan Junior	25e3c82c0e	Make gdbserver work with filename-only binaries Simon mentioned on IRC that, after the startup-with-shell feature has been implemented on gdbserver, it is not possible to specify a filename-only binary, like: $ gdbserver :1234 a.out /bin/bash: line 0: exec: a.out: not found During startup program exited with code 127. Exiting This happens on systems where the current directory "." is not listed in the PATH environment variable. Although including "." in the PATH variable is a possible workaround, this can be considered a regression because before startup-with-shell it was possible to use only the filename (due to reason that gdbserver used "exec" directly). The idea of the patch is to verify if the program path provided by the user (or by the remote protocol) contains a directory separator character. If it doesn't, it means we're dealing with a filename-only binary, so we call "gdb_abspath" to properly expand it and transform it into a full path. Otherwise, we leave the program path untouched. This mimicks the behaviour seen on GDB (look at "openp" and "attach_inferior", for example). I am also submitting a testcase which exercises the scenario described above. This test requires gdbserver to be executed in a different CWD than the original, so I also created a helper function, "with_cwd" (on testsuite/lib/gdb.exp), which takes care of cd'ing into and out of the specified dir. Built and regtested on BuildBot, without regressions. gdb/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simon.marchi@polymtl.ca> common/common-utils.c: Include "sys/stat.h". (is_regular_file): Move here from "source.c"; change return type to "bool". * common/common-utils.h (is_regular_file): New prototype. * common/pathstuff.c (contains_dir_separator): New function. * common/pathstuff.h (contains_dir_separator): New prototype. * source.c: Don't include "sys/stat.h". (is_regular_file): Move to "common/common-utils.c". gdb/gdbserver/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> * server.c: Include "filenames.h" and "pathstuff.h". (program_name): Delete variable. (program_path): New anonymous class. (get_exec_wrapper): Use "program_path" instead of "program_name". (handle_v_run): Likewise. (captured_main): Likewise. (process_serial_event): Likewise. gdb/testsuite/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.server/abspath.exp: New file. * lib/gdb.exp (with_cwd): New procedure.	8 years ago
Joel Brobecker	e2882c8578	Update copyright year range in all GDB files gdb/ChangeLog: Update copyright year range in all GDB files	8 years ago
Simon Marchi	8172f16b5b	Poison XNEW and friends for types that should use new/delete This patch (finally!) makes it so that trying to use XNEW with a type that requires "new" will cause a compilation error. The criterion I initially used to allow a type to use XNEW (which calls malloc in the end) was std::is_trivially_constructible, but then realized that gcc 4.8 did not have it. Instead, I went with: using IsMallocatable = std::is_pod<T>; which is just a bit more strict, which doesn't hurt. A similar thing is done for macros that free instead of allocated, the criterion is: using IsFreeable = gdb::Or<std::is_trivially_destructible<T>, std::is_void<T>>; Trying to use XNEW on a type that requires new will result in an error like this: In file included from /home/simark/src/binutils-gdb/gdb/common/common-utils.h:26:0, from /home/simark/src/binutils-gdb/gdb/common/common-defs.h:78, from /home/simark/src/binutils-gdb/gdb/defs.h:28, from /home/simark/src/binutils-gdb/gdb/lala.c:1: /home/simark/src/binutils-gdb/gdb/common/poison.h: In instantiation of ‘T* xnew() [with T = bar]’: /home/simark/src/binutils-gdb/gdb/lala.c:13:3: required from here /home/simark/src/binutils-gdb/gdb/common/poison.h:103:3: error: static assertion failed: Trying to use XNEW with a non-POD data type. Use operator new instead. static_assert (IsMallocatable<T>::value, "Trying to use XNEW with a non-POD\ ^~~~~~~~~~~~~ Generated-code-wise, it adds one more function call (xnew<T>) when using XNEW and building with -O0, but it all goes away with optimizations enabled. gdb/ChangeLog: * common/common-utils.h: Include poison.h. (xfree): Remove declaration, add definition with static_assert. * common/common-utils.c (xfree): Remove. * common/poison.h (IsMallocatable): Define. (IsFreeable): Define. (free): Delete for non-freeable types. (xnew): New. (XNEW): Undef and redefine. (xcnew): New. (XCNEW): Undef and redefine. (xdelete): New. (XDELETE): Undef and redefine. (xnewvec): New. (XNEWVEC): Undef and redefine. (xcnewvec): New. (XCNEWVEC): Undef and redefine. (xresizevec): New. (XRESIZEVEC): Undef and redefine. (xdeletevec): New. (XDELETEVEC): Undef and redefine. (xnewvar): New. (XNEWVAR): Undef and redefine. (xcnewvar): New. (XCNEWVAR): Undef and redefine. (xresizevar): New. (XRESIZEVAR): Undef and redefine.	9 years ago
Simon Marchi	b020ff8074	Introduce in_inclusive_range, fix -Wtautological-compare warnings When compiling with clang or gcc 8, we see warnings like this: /home/emaisin/src/binutils-gdb/gdb/arm-tdep.c:10013:13: error: comparison of 0 <= unsigned expression is always true [-Werror,-Wtautological-compare] if (0 <= insn_op1 && 3 >= insn_op1) ~ ^ ~~~~~~~~ /home/emaisin/src/binutils-gdb/gdb/arm-tdep.c:11722:20: error: comparison of unsigned expression >= 0 is always true [-Werror,-Wtautological-compare] else if (opB >= 0 && opB <= 2) ~~~ ^ ~ This is because an unsigned integer (opB in this case) will always be >= 0. It is still useful to keep both bounds of the range in the expression, even if one is at the edge of the data type range. This patch introduces a utility function in_inclusive_range that gets rid of the warning while conveying that we are checking for a range. Tested by rebuilding. gdb/ChangeLog: * common/common-utils.h (in_inclusive_range): New function. * arm-tdep.c (arm_record_extension_space): Use in_inclusive_range. (thumb_record_ld_st_reg_offset): Use in_inclusive_range. * cris-tdep.c (cris_spec_reg_applicable): Use in_inclusive_range.	9 years ago
Pedro Alves	31b833b3ea	Introduce string_appendf/string_vappendf string_appendf is like string_printf, but instead of allocating a new string, it appends to an existing string. This allows reusing a std::string's memory buffer across several calls, for example. gdb/ChangeLog: 2017-10-30 Pedro Alves <palves@redhat.com> * common/common-utils.c (string_appendf, string_vappendf): New functions. * common/common-utils.h (string_appendf, string_vappendf): New declarations. * unittests/common-utils-selftests.c (string_appendf_func) (test_appendf_func, string_vappendf_wrapper, string_appendf_tests) (string_vappendf_tests): New functions. (_initialize_common_utils_selftests): Register "string_appendf" and "string_vappendf tests".	9 years ago
Tom Tromey	bd413795d3	Introduce string_vprintf This adds string_vprintf, a va_list variant of string_printf. This will be used in later patches. gdb/ChangeLog 2017-09-29 Tom Tromey <tom@tromey.com> * unittests/common-utils-selftests.c (format): New function. (string_vprintf_tests): New function. (_initialize_common_utils_selftests): Register new tests. * common/common-utils.c (string_vprintf): New function. * common/common-utils.h (string_vprintf): Declare.	9 years ago
Tom Tromey	f1735a53a6	Rename _const functions to use overloading instead This renames a few functions -- skip_spaces_const, skip_to_space_const, get_number_const, extract_arg_const -- to drop the "_const" suffix and instead rely on overloading. This makes future const fixes simpler by reducing the number of lines that must be changed. I think it is also not any less clear, as all these functions have the same interface as their non-const versions by design. Furthermore there's an example of using an overload in-tree already, namely check_for_argument. This patch was largely created using some perl one-liners; then a few fixes were applied by hand. ChangeLog 2017-09-11 Tom Tromey <tom@tromey.com> * common/common-utils.h (skip_to_space): Remove macro, redeclare as function. (skip_to_space): Rename from skip_to_space_const. * common/common-utils.c (skip_to_space): New function. (skip_to_space): Rename from skip_to_space_const. * cli/cli-utils.h (get_number): Rename from get_number_const. (extract_arg): Rename from extract_arg_const. * cli/cli-utils.c (get_number): Rename from get_number_const. (extract_arg): Rename from extract_arg_const. (number_or_range_parser::get_number): Use ::get_number. * aarch64-linux-tdep.c, ada-lang.c, arm-linux-tdep.c, ax-gdb.c, break-catch-throw.c, breakpoint.c, cli/cli-cmds.c, cli/cli-dump.c, cli/cli-script.c, cli/cli-setshow.c, compile/compile.c, completer.c, demangle.c, disasm.c, findcmd.c, linespec.c, linux-tdep.c, linux-thread-db.c, location.c, mi/mi-parse.c, minsyms.c, nat/linux-procfs.c, printcmd.c, probe.c, python/py-breakpoint.c, record.c, rust-exp.y, serial.c, stack.c, stap-probe.c, tid-parse.c, tracepoint.c: Update all callers.	9 years ago
Sergio Durigan Junior	2090129c36	Share fork_inferior et al with gdbserver This is the most important (and the biggest, sorry) patch of the series. It moves fork_inferior from gdb/fork-child.c to nat/fork-inferior.c and makes all the necessary adjustments to both GDB and gdbserver to make sure everything works OK. There is no "most important change" with this patch; all changes are made in a progressive way, making sure that gdbserver had the necessary features while not breaking GDB at the same time. I decided to go ahead and implement a partial support for starting the inferior with a shell on gdbserver, although the full feature comes in the next patch. The user won't have the option to disable the startup-with-shell, and also won't be able to change which shell gdbserver will use (other than setting the $SHELL environment variable, that is). Everything is working as expected, and no regressions were present during the tests. gdb/ChangeLog: 2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com> Pedro Alves <palves@redhat.com> * Makefile.in (HFILES_NO_SRCDIR): Add "common/common-inferior.h" and "nat/fork-inferior.h". * common/common-inferior.h: New file, with contents from "gdb/inferior.h". * commom/common-utils.c: Include "common-utils.h". (stringify_argv): New function. * common/common-utils.h (stringify_argv): New prototype. * configure.nat: Add "fork-inferior.o" as a dependency for "linux", "fbsd" and "nbsd" hosts. * corefile.c (get_exec_file): Update comment. * darwin-nat.c (darwin_ptrace_him): Call "gdb_startup_inferior" instead of "startup_inferior". (darwin_create_inferior): Call "add_thread_silent" after "fork_inferior". * fork-child.c: Cleanup unnecessary includes. (SHELL_FILE): Move to "common/common-fork-child.c". (environ): Likewise. (exec_wrapper): Initialize. (get_exec_wrapper): New function. (breakup_args): Move to "common/common-fork-child.c"; rename to "breakup_args_for_exec". (escape_bang_in_quoted_argument): Move to "common/common-fork-child.c". (saved_ui): New variable. (prefork_hook): New function. (postfork_hook): Likewise. (postfork_child_hook): Likewise. (gdb_startup_inferior): Likewise. (fork_inferior): Move to "common/common-fork-child.c". Update function to support gdbserver. (startup_inferior): Likewise. * gdbcore.h (get_exec_file): Remove declaration. * gnu-nat.c (gnu_create_inferior): Call "gdb_startup_inferior" instead of "startup_inferior". Call "add_thread_silent" after "fork_inferior". * inf-ptrace.c: Include "nat/fork-inferior.h" and "utils.h". (inf_ptrace_create_inferior): Call "gdb_startup_inferior" instead of "startup_inferior". Call "add_thread_silent" after "fork_inferior". * inferior.h: Include "common-inferior.h". (trace_start_error): Move to "common/common-utils.h". (trace_start_error_with_name): Likewise. (fork_inferior): Move prototype to "nat/fork-inferior.h". (startup_inferior): Likewise. (gdb_startup_inferior): New prototype. * nat/fork-inferior.c: New file, with contents from "fork-child.c". * nat/fork-inferior.h: New file. * procfs.c (procfs_init_inferior): Call "gdb_startup_inferior" instead of "startup_inferior". Call "add_thread_silent" after "fork_inferior". * target.h (target_terminal_init): Move prototype to "target/target.h". (target_terminal_inferior): Likewise. (target_terminal_ours): Likewise. * target/target.h (target_terminal_init): New prototype, moved from "target.h". (target_terminal_inferior): Likewise. (target_terminal_ours): Likewise. * utils.c (gdb_flush_out_err): New function. gdb/gdbserver/ChangeLog: 2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com> Pedro Alves <palves@redhat.com> * Makefile.in (SFILES): Add "nat/fork-inferior.o". * configure: Regenerate. * configure.srv (srv_linux_obj): Add "fork-child.o" and "fork-inferior.o". (i[34567]86--lynxos): Likewise. (spu--): Likewise. fork-child.c: New file. * linux-low.c: Include "common-inferior.h", "nat/fork-inferior.h" and "environ.h". (linux_ptrace_fun): New function. (linux_create_inferior): Adjust function prototype to reflect change on "target.h". Adjust function code to use "fork_inferior". (linux_request_interrupt): Delete "signal_pid". * lynx-low.c: Include "common-inferior.h" and "nat/fork-inferior.h". (lynx_ptrace_fun): New function. (lynx_create_inferior): Adjust function prototype to reflect change on "target.h". Adjust function code to use "fork_inferior". * nto-low.c (nto_create_inferior): Adjust function prototype and code to reflect change on "target.h". Update comments. * server.c: Include "common-inferior.h", "nat/fork-inferior.h", "common-terminal.h" and "environ.h". (terminal_fd): Moved to fork-child.c. (old_foreground_pgrp): Likewise. (restore_old_foreground_pgrp): Likewise. (last_status): Make it global. (last_ptid): Likewise. (our_environ): New variable. (startup_with_shell): Likewise. (program_name): Likewise. (program_argv): Rename to... (program_args): ...this. (wrapper_argv): New variable. (start_inferior): Delete function. (get_exec_wrapper): New function. (get_exec_file): Likewise. (get_environ): Likewise. (prefork_hook): Likewise. (post_fork_inferior): Likewise. (postfork_hook): Likewise. (postfork_child_hook): Likewise. (handle_v_run): Update code to deal with arguments coming from the remote host. Update calls from "start_inferior" to "create_inferior". (captured_main): Likewise. Initialize environment variable. Call "have_job_control". * server.h (post_fork_inferior): New prototype. (get_environ): Likewise. (last_status): Declare. (last_ptid): Likewise. (signal_pid): Likewise. * spu-low.c: Include "common-inferior.h" and "nat/fork-inferior.h". (spu_ptrace_fun): New function. (spu_create_inferior): Adjust function prototype to reflect change on "target.h". Adjust function code to use "fork_inferior". * target.c (target_terminal_init): New function. (target_terminal_inferior): Likewise. (target_terminal_ours): Likewise. * target.h: Include <vector>. (struct target_ops) <create_inferior>: Update prototype. (create_inferior): Update macro. * utils.c (gdb_flush_out_err): New function. * win32-low.c (win32_create_inferior): Adjust function prototype and code to reflect change on "target.h". gdb/testsuite/ChangeLog: 2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.server/non-existing-program.exp: Update regex in order to reflect the fact that gdbserver is now using fork_inferior (with a shell) to startup the inferior.	9 years ago
Sergio Durigan Junior	7c5ded6a00	C++-fy and prepare for sharing fork_inferior As a preparation for the next patch, which will move fork_inferior from GDB to common/ (and therefore share it with gdbserver), it is interesting to convert a few functions to C++. This patch touches functions related to parsing command-line arguments to the inferior (see gdb/fork-child.c:breakup_args), the way the arguments are stored on fork_inferior (using std::vector instead of char *), and the code responsible for dealing with argv also on gdbserver. I've taken this opportunity and decided to constify a few arguments to fork_inferior/create_inferior as well, in order to make the code cleaner. And now, on gdbserver, we're using xstrdup everywhere and aren't checking for memory allocation failures anymore, as requested by Pedro: <https://sourceware.org/ml/gdb-patches/2017-03/msg00191.html> Message-Id: <025ebdb9-90d9-d54a-c055-57ed2406b812@redhat.com> Pedro Alves wrote: > On the "== NULL" check: IIUC, the old NULL check was there to > handle strdup returning NULL due to out-of-memory. > See NULL checks and comments further above in this function. > Now that you're using a std::vector, that doesn't work or make > sense any longer, since if push_back fails to allocate space for > its internal buffer (with operator new), our operator new replacement > (common/new-op.c) calls malloc_failure, which aborts gdbserver. > > Not sure it makes sense to handle out-of-memory specially in > the gdb/rsp-facing functions nowadays (maybe git blame/log/patch > submission for that code shows some guidelines). Maybe (or, probably) > it's OK to stop caring about it, but then we should consistently remove > left over code, by using xstrdup instead and remove the NULL checks. IMO this refactoring was very good to increase the readability of the code as well, because some parts of the argument handling were unnecessarily confusing before. gdb/ChangeLog: 2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com> common/common-utils.c (free_vector_argv): New function. * common/common-utils.h: Include <vector>. (free_vector_argv): New prototype. * darwin-nat.c (darwin_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * fork-child.c: Include <vector>. (breakup_args): Rewrite function, using C++. (fork_inferior): Rewrite function header, constify "exec_file_arg" and accept "std::string" for "allargs". Update the code to calculate "argv" based on "allargs". Update calls to "exec_fun" and "execvp". * gnu-nat.c (gnu_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * go32-nat.c (go32_create_inferior): Likewise. * inf-ptrace.c (inf_ptrace_create_inferior): Likewise. * infcmd.c (run_command_1): Constify "exec_file". Use "std::string" for inferior arguments. * inferior.h (fork_inferior): Update prototype. * linux-nat.c (linux_nat_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * nto-procfs.c (procfs_create_inferior): Likewise. * procfs.c (procfs_create_inferior): Likewise. * remote-sim.c (gdbsim_create_inferior): Likewise. * remote.c (extended_remote_run): Update code to accept "std::string" as argument. (extended_remote_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * rs6000-nat.c (super_create_inferior): Likewise. (rs6000_create_inferior): Likewise. * target.h (struct target_ops) <to_create_inferior>: Likewise. * windows-nat.c (windows_create_inferior): Likewise. gdb/gdbserver/ChangeLog: 2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com> * server.c: Include <vector>. <program_argv, wrapper_argv>: Convert to std::vector. (start_inferior): Rewrite function to use C++. (handle_v_run): Likewise. Update code that calculates the argv based on the vRun packet; use C++. (captured_main): Likewise.	9 years ago
Joel Brobecker	61baf725ec	update copyright year range in GDB files This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.	9 years ago
Pedro Alves	d4081a383e	Introduce string_printf This introduces the string_printf function. Like asprintf, but returns a std::string. gdb/ChangeLog: 2016-11-08 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_OBS): Add utils-selftests.o. * common/common-utils.c (string_printf): New function. * common/common-utils.h: Include <string>. (string_printf): Declare. * utils-selftests.c: New file.	10 years ago
Joel Brobecker	618f726fcb	GDB copyright headers update after running GDB's copyright.py script. gdb/ChangeLog: Update year range in copyright notice of all files.	10 years ago
Jan Kratochvil	03aef70fec	Move utility functions to common/ gdb/ChangeLog 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com Jan Kratochvil <jan.kratochvil@redhat.com> Move utility functions to common/. * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const): Move defs to common/common-utils.c. * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space) (skip_to_space_const): Move decls to common/common-utils.h. * common/common-defs.h: Move include of common-types.h before common-utils.h. * common/common-utils.c: Include host-defs.h and ctype.h. (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move from utils.c. (skip_spaces, skip_spaces_const, skip_to_space_const): Move from cli/cli-utils.c. * common/common-utils.h (strtoulst): Move decl from utils.h. (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const): Move from cli/cli-utils.h. * common/host-defs.h: Include limits.h. (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h. (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h. * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to common/common-utils.h. * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int) (strtoulst): Move to common/common-utils.c. * utils.h (strtoulst): Moved decl to common/common-utils.h.	11 years ago
Gary Benson	61012eef84	New common function "startswith" This commit introduces a new inline common function "startswith" which takes two string arguments and returns nonzero if the first string starts with the second. It also updates the 295 places where this logic was written out longhand to use the new function. gdb/ChangeLog: * common/common-utils.h (startswith): New inline function. All places where this logic was used updated to use the above.	11 years ago
Sergio Durigan Junior	fb23d55442	Move safe_strerror to common/ This patch moves safe_strerror from the gdb/{posix,mingw}-hdep.c files to the respective common/{posix,mingw}-strerror.c files. This is a preparation for the next patch, which shares a common code (to disable address space randomization when creating a new inferior). The patch has been regtested on Fedora 20 x86_64, and no regressions were found. gdb/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and common/posix-strerror.c. (posix-strerror.o): New rule. (mingw-strerror.o): Likewise. * common/common-utils.h (safe_strerror): Move prototype to here, from utils.h. * common/common.host: New file. * common/mingw-strerror.c: Likewise. * common/posix-strerror.c: Likewise. * configure: Regenerated. * configure.ac: Source common/common.host. Add variable common_host_obs to gdb_host_obs. * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and gdb/common/posix-strerror.c when warning about the use of strerror. * mingw-hdep.c (safe_strerror): Remove definition; move it to common/mingw-strerror.c. * posix-hdep.c (safe_strerror): Remove definition; move it to common/posix-hdep.c. * utils.h (safe_strerror): Remove prototype; move to common/common-utils.h. gdb/gdbserver/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (posix-strerror.o): New rule. (mingw-strerror.o): Likewise. * configure: Regenerated. * configure.ac: Source file ../common/common.host. Initialize new variable srv_host_obs. Add srv_host_obs to GDBSERVER_DEPFILES.	11 years ago
Joel Brobecker	32d0add0a6	Update year range in copyright notice of all files owned by the GDB project. gdb/ChangeLog: Update year range in copyright notice of all files.	11 years ago
Gary Benson	ef87c8bbe7	Introduce common/errors.h This introduces common/errors.h. This holds some error- and warning- related declarations that can be used by the code in common, nat and target. Some of the declared functions must be provided by the client as documented by the header file comments. gdb/ChangeLog: * common/errors.h: New file. * common/errors.c: Likewise. * Makefile.in (SFILES): Add common/errors.c. (HFILES_NO_SRCDIR): Add common/errors.h. (COMMON_OBS): Add errors.o. (errors.o): New rule. * common/common-defs.h: Include errors.h. * utils.h (perror_with_name, error, verror, warning, vwarning): Don't declare. * common/common-utils.h: (malloc_failure, internal_error): Likewise. gdb/gdbserver/ChangeLog: * Makefile.in (SFILES): Add common/errors.c. (OBS): Add errors.o. (IPA_OBS): Add errors-ipa.o. (errors.o): New rule. (errors-ipa.o): Likewise. * utils.h (perror_with_name, error, warning): Don't declare. * utils.c (warning): Renamed and rewritten as... (vwarning): New function. (error): Renamed and rewritten as... (verror): New function. (internal_error): Renamed and rewritten as... (internal_verror): New function.	12 years ago
Gary Benson	0e443c875f	Move ansidecl.h to common-defs.h This commit moves the inclusion of ansidecl.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include ansidecl.h. * defs.h: Do not include ansidecl.h. * common/buffer.h: Likewise. * common/common-utils.h: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include ansidecl.h.	12 years ago
Gary Benson	8ebb3f5606	Move stddef.h to common-defs.h This commit moves the inclusion of stddef.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include stddef.h. * defs.h: Do not include stddef.h. * common/common-utils.h: Likewise. * amd64fbsd-nat.c: Likewise. * bcache.c: Likewise. * charset.c: Likewise. * common/buffer.h: Likewise. * common/vec.h: Likewise. * i386bsd-nat.c: Likewise. * nat/linux-btrace.h: Likewise. * ppcfbsd-nat.c: Likewise. * ppcnbsd-tdep.h: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.h: Likewise. * python/py-gdb-readline.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * linux-x86-low.c: Do not include stddef.h. * lynx-ppc-low.c: Likewise. * tracepoint.c: Likewise.	12 years ago
Gary Benson	8980bdf628	Move stdarg.h to common-defs.h This commit moves the inclusion of stdarg.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include stdarg.h. * defs.h: Do not include stdarg.h. * ada-lang.c: Likewise. * common/common-utils.h: Likewise. * guile/scm-string.c: Likewise. * guile/scm-utils.c: Likewise. * m32c-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include stdarg.h. * nto-low.c: Likewise.	12 years ago
Gary Benson	5d4848a4bd	Do not include config.h directly All source files under gdb/ that include headers from gdb/ include either defs.h or server.h before any other code with the exception of gdb/gdbserver/gdbreplay.c which seems to be a special case. Both defs.h and server.h include both our and gnulib's config.h files as their first non-comment line, so no other file ever needs to directly include any config.h. This commit removes two such direct config.h includes. gdb/ 2014-07-30 Gary Benson <gbenson@redhat.com> * common/common-utils.h: Do not include config.h. * nat/linux-btrace.h: Likewise.	12 years ago
Joel Brobecker	46bbb3edac	Add ARI (ok) marker for __func__ reference in common-utils.h The ARI script flagged the use of the __func__ variable, which is normally not allowed (not defined in C90). However, this particular use is OK, as the reference is only made when __STDC_VERSION__ >= 199901L. So, add an "ARI:" comment to explicitly OK this use. gdb/ChangeLog: * common/common-utils.h: Add "ARI:" comment beside __func__ reference.	12 years ago
Joel Brobecker	3a80edfc74	Expand documentation of common-utils.h::FUNCTION_NAME While looking at this macro, I noticed that it wasn't always necessarily defined. That prompted me to search the current sources to make sure that all uses were adequately protected, which they were. But to help prevent future uses to be made unprotected, this patch expands the current macro documentation a bit. gdb/ChangeLog: * common/common-utils.h (FUNCTION_NAME): Expand the macro's documentation a bit.	12 years ago
Doug Evans	df049a5831	Move ASSERT_FUNCTION to FUNCTION_NAME. * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION, and moved here ... * common/gdb_assert.h (ASSERT_FUNCTION): ... from here. #include "common-utils.h". (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update. * common/vec.h (VEC_ASSERT_PASS): Update. * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h. (MACH_CHECK_ERROR): Update.	12 years ago
Joel Brobecker	ecd75fc8ee	Update Copyright year range in all files maintained by GDB.	12 years ago
Pedro Alves	baea0daecf	Move savestring to common/common-utils.c, make gdbserver use it. This makes gdbserver share gdb's savestring, instead of baking its own. Tested on x86_64 Fedora 17. gdb/ 2013-02-14 Pedro Alves <palves@redhat.com> * utils.c (savestring): Don't #undef it. Move function to common/common-utils.c. * common/common-utils.c: Include gdb_string.h. (savestring): Move here from utils.c. * common/common-utils.h (savestring): Declare. gdb/gdbserver/ 2013-02-14 Pedro Alves <palves@redhat.com> * tracepoint.c (save_string): Delete. (add_tracepoint_action): Use savestring instead of save_string.	13 years ago
Joel Brobecker	28e7fd6234	Update years in copyright notice for the GDB files. Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.	13 years ago
Tom Tromey	a93478eab4	* contrib/ari/gdb_ari.sh: Remove rules for xasprintf and xvasprintf. * common/common-utils.c (xasprintf, xvasprintf): Remove. * common/common-utils.h (xasprintf, xvasprintf): Remove.	14 years ago
Joel Brobecker	0b30217134	Copyright year update in most files of the GDB Project. gdb/ChangeLog: Copyright year update in most files of the GDB Project.	14 years ago
Kwok Yeung	d26e3629bb	2011-07-22 Kwok Cheung Yeung <kcy@codesourcery.com> gdb/ * defs.h: Add guard against inclusion in gdbserver. (struct ptid, ptid_t): Move to common/ptid.h. (xfree, xzalloc, xasprintf, xvasprintf, xstrprintf, xstrvprintf, xsnprintf, internal_error): Move to common/common-utils.h. (nomem): Delete. * gdb_assert.h: Move into common/ sub-directory. * gdb_locale.h: Ditto. * gdb_dirent.h: Ditto. * inferior.h (minus_one_ptid, null_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Move into common/ptid.h. * xml-support.c (xml_escape_text): Move into common/xml-utils.c. (gdb_xml_create_parser_and_cleanup_1, xml_fetch_context_from_file): Change nomem to malloc_failure. * xml-support.h (xml_escape_text): Move into common/xml-utils.h. * utils.c (nomem): Rename to malloc_failure. (xmalloc, xzalloc, xrealloc, xcalloc, xfree, xstrprintf, xasprintf, xvasprintf, xstrvprintf, xsnprintf): Move to common/common-utils.c. (gdb_buildargv): Change nomem to malloc_failure. * infrun.c (null_ptid, minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Move into common/ptid.c. (initialize_infrun): Delete initialization of null_ptid and minus_one_ptid. * linux-nat.c (linux_nat_xfer_osdata): Defer to linux_common_xfer_osdata. * Makefile.in (SFILES): Add common/common-utils.c, common/xml-utils.c, common/ptid.c and common/buffer.c. (HFILES_NO_SRCDIR): Add common/common-utils.h, common/xml-utils.h, common/ptid.h, common/buffer.h and common/linux-osdata.h. (COMMON_OBS): Add xml-utils.o, common-utils.o, buffer.o and ptid.o. (common-utils.o, xml-utils.o, ptid.o, buffer.o, linux-osdata.o): New rules. * common/gdb_assert.h: New. * common/gdb_dirent.h: New. * common/gdb_locale.h: New. * common/buffer.c: New. * common/buffer.h: New. * common/ptid.c: New. * common/ptid.h: New. * common/xml-utils.c: New. * common/xml-utils.h: New. * common/common-utils.c: New. * common/common-utils.h: New. * common/linux-osdata.c: New. * common/linux-osdata.h: New. * config/alpha/alpha-linux.mh (NATDEPFILES): Add linux-osdata.o. * config/arm/linux.mh (NATDEPFILES): Ditto. * config/i386/linux.mh (NATDEPFILES): Ditto. * config/i386/linux64.mh (NATDEPFILES): Ditto. * config/ia64/linux.mh (NATDEPFILES): Ditto. * config/m32r/linux.mh (NATDEPFILES): Ditto. * config/m68k/linux.mh (NATDEPFILES): Ditto. * config/mips/linux.mh (NATDEPFILES): Ditto. * config/pa/linux.mh (NATDEPFILES): Ditto. * config/powerpc/linux.mh (NATDEPFILES): Ditto. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Ditto. * config/s390/s390.mh (NATDEPFILES): Ditto. * config/sparc/linux.mh (NATDEPFILES): Ditto. * config/sparc/linux64.mh (NATDEPFILES): Ditto. * config/xtensa/linux.mh (NATDEPFILES): Ditto. gdbserver/ * linux-low.c (compare_ints, unique, list_threads, show_process, linux_core_of_thread): Delete. (linux_target_ops): Change linux_core_of_thread to linux_common_core_of_thread. (linux_qxfer_osdata): Defer to linux_common_xfer_osdata. * utils.c (malloc_failure): Change type of argument. (xmalloc, xrealloc, xcalloc, xsnprintf): Delete. * Makefile.in (SFILES): Add common/common-utils.c, common/xml-utils.c, common/linux-osdata.c, common/ptid.c and common/buffer.c. (OBS): Add xml-utils.o, common-utils.o, ptid.o and buffer.o. (IPA_OBJS): Add common-utils-ipa.o. (ptid_h, linux_osdata_h): New macros. (server_h): Add common/common-utils.h, common/xml-utils.h, common/buffer.h, common/gdb_assert.h, common/gdb_locale.h and common/ptid.h. (common-utils-ipa.o, common-utils.o, xml-utils.o, linux-osdata.o, ptid.o, buffer.o): New rules. (linux-low.o): Add common/linux-osdata.h as a dependency. * configure.srv (srv_tgtobj): Add linux-osdata.o to Linux targets. * configure.ac: Add AC_HEADER_DIRENT check. * config.in: Regenerate. * configure: Regenerate. * remote-utils.c (xml_escape_text): Delete. (buffer_grow, buffer_free, buffer_init, buffer_finish, buffer_xml_printf): Move to common/buffer.c. * server.c (main): Remove call to initialize_inferiors. * server.h (struct ptid, ptid_t, minus_one_ptid, null_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid, initialize_inferiors, xml_escape_text, internal_error, gdb_assert, gdb_assert_fail): Delete. (struct buffer, buffer_grow, buffer_free, buffer_init, buffer_finish, buffer_xml_printf, buffer_grow_str, buffer_grow_str0): Move to common/buffer.h. * inferiors.c (null_ptid, minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid, initialize_inferiors): Delete.	15 years ago

3 Commits (dbed468bcb8dc3c85fcf30ebae7ba67cbe7dc19c)