binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Alan Modra	d5c04e1bf8	ChangeLog rotation	7 years ago
Alan Modra	d1a3c973fa	PR24028, PPC_INT_FMT PPC_INT_FMT is redundant now that bfd.h pulls in inttypes.h if available. Apparently MacOS Mojave defines int64_t as long long even though long is also 64 bits, which confuses the logic selecting PPC_INT_FMT (and BFD_PRI64 too). Hopefully inttypes.h is available on Mojave. PR 24028 include/ * opcode/ppc.h (PPC_INT_FMT): Delete. opcodes/ * ppc-dis.c (print_insn_powerpc): Replace PPC_INT_FMT uses with PRId64/PRIx64.	7 years ago
H.J. Lu	0a59decbb8	elf: Add PT_GNU_PROPERTY segment type Linkers group input note sections with the same name into one output note section with the same name. One output note section is placed in one PT_NOTE segment. New linkers merge all input .note.gnu.property sections into one output .note.gnu.property section with a single NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older linkers treat input .note.gnu.property section as a generic note section and just concatenate all input .note.gnu.property sections into one output .note.gnu.property section without merging them, we may see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which are invalid. GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such that linker sets the bit for non-relocatable outputs. But it isn't sufficient: 1. It doesn't cover generic properties. 2. When -mx86-used-note=yes is passed to x86 assembler, the GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED property in object file and older linkers generate invalid NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit set. I am proposing the following changes: 1. Add PT_GNU_PROPERTY segment type: # define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) which covers .note.gnu.property section. 2. Remove GNU_PROPERTY_X86_UINT32_VALID. bfd/ PR ld/23900 * elf.c (get_program_header_size): Add a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. (_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. * elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set GNU_PROPERTY_X86_UINT32_VALID. binutils/ PR ld/23900 * readelf.c (get_segment_type): Support PT_GNU_PROPERTY. (decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID check. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/i386/pr21231b.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. gas/ PR ld/23900 * config/tc-i386.c (x86_cleanup): Don't set GNU_PROPERTY_X86_UINT32_VALID. * testsuite/gas/i386/property-1.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. include/ PR ld/23900 * elf/common.h (PT_GNU_PROPERTY): New. (GNU_PROPERTY_X86_UINT32_VALID): Removed. ld/ PR ld/23900 * testsuite/ld-elf/elf.exp: Run PR ld/23900 test. * testsuite/ld-elf/pr23900-1-32.rd: New file. * testsuite/ld-elf/pr23900-1-64.rd: Likewise. * testsuite/ld-elf/pr23900-1.d: Likewise. * testsuite/ld-elf/pr23900-1.s: Likewise. * testsuite/ld-elf/pr23900-2.s: Likewise. * testsuite/ld-elf/pr23900-2a.d: Likewise. * testsuite/ld-elf/pr23900-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Adjusted. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372c.d: Expect <None> for GNU_PROPERTY_X86_ISA_1_USED. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. * testsuite/ld-x86-64/property-x86-5b.s: Likewise.	7 years ago
Nick Clifton	69799d67e8	Fix a failure in the libiberty testsuite by increasing the recursion limit to 2048. PR 88409 include * demangle.h (DEMANGLE_RECURSION_LIMIT): Increase to 2048. binutils* NEWS: Note that recursion limit has increased to 2048. * doc/binutils.texi: Likewise.	7 years ago
H.J. Lu	d2ef37ebd9	elf: Report property change when merging properties With merging properties, report property change in linker map file, like Merging program properties Removed property 0xc0010000 to merge /usr/lib/gcc/x86_64-redhat-linux/8/../../../../lib64/crt1.o (0x0) and /usr/lib/gcc/x86_64-redhat-linux/8/../../../../lib64/crti.o (0x0) Removed property 0xc0000002 to merge /usr/lib/gcc/x86_64-redhat-linux/8/../../../../lib64/crt1.o (0x3) and x.o (not found) Removed property 0xc0000000 to merge /usr/lib/gcc/x86_64-redhat-linux/8/../../../../lib64/crt1.o (not found) and /usr/lib64/libc_nonshared.a(elf-init.oS) (0x0) Removed property 0xc0000001 to merge /usr/lib/gcc/x86_64-redhat-linux/8/../../../../lib64/crt1.o (not found) and /usr/lib64/libc_nonshared.a(elf-init.oS) (0x0) bfd/ * elf-properties.c (elf_find_and_remove_property): Add a bfd_boolean argument to indicate if the property should be removed. (elf_merge_gnu_property_list): Updated. Report property change in linker map file. (elf_get_gnu_property_section_size): Skip property_remove properties. (elf_write_gnu_properties): Likewise. (_bfd_elf_link_setup_gnu_properties): Report property merge in linker map file. Pass abfd to elf_merge_gnu_property_list. include/ * bfdlink.h (bfd_link_info): Add has_map_file. ld/ * NEWS: Updated for property change report. * ld.texi: Document property change report. * ldmain.c (main): Set link_info.has_map_file to TRUE when linker map file is used. * testsuite/ld-scripts/rgn-over1.d: Updated. * testsuite/ld-scripts/rgn-over2.d: Likewise. * testsuite/ld-scripts/rgn-over3.d: Likewise. * testsuite/ld-scripts/rgn-over4.d: Likewise. * testsuite/ld-scripts/rgn-over5.d: Likewise. * testsuite/ld-scripts/rgn-over6.d: Likewise. * testsuite/ld-scripts/rgn-over7.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Check linker map file. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.map: New file.	7 years ago
Nick Clifton	af03af8f55	Synchronize libiberty with gcc and add --no-recruse-limit option to tools that support name demangling. This patch addresses the multitude of bug reports about resource exhaustion in libiberty's name demangling code. It adds a limit to the amount of recursion that is allowed, before an error is triggered. It also adds a new demangling option to disable this limit. (The limit is enabled by default). PR 87681 PR 87675 PR 87636 PR 87335 libiberty * cp-demangle.h (struct d_info): Add recursion_limit field. * cp-demangle.c (d_function_type): If the recursion limit is enabled and reached, return with a failure result. (d_demangle_callback): If the recursion limit is enabled, check for a mangled string that is so long that there is not enough stack space for the local arrays. * cplus-dem.c (struct work): Add recursion_level field. (demangle_nested_args): If the recursion limit is enabled and reached, return with a failure result. include * demangle.h (DMGL_RECURSE_LIMIT): Define. (DEMANGLE_RECURSION_LIMIT): Prototype. binutuils * addr2line.c (demangle_flags): New static variable. (long_options): Add --recurse-limit and --no-recurse-limit. (translate_address): Pass demangle_flags to bfd_demangle. (main): Handle --recurse-limit and --no-recurse-limit options. * cxxfilt.c (flags): Add DMGL_RECURSE_LIMIT. (long_options): Add --recurse-limit and --no-recurse-limit. (main): Handle new options. * dlltool.c (gen_def_file): Include DMGL_RECURSE_LIMIT in flags passed to cplus_demangle. * nm.c (demangle_flags): New static variable. (long_options): Add --recurse-limit and --no-recurse-limit. (main): Handle new options. * objdump.c (demangle_flags): New static variable. (usage): Add --recurse-limit and --no-recurse-limit. (long_options): Likewise. (objdump_print_symname): Pass demangle_flags to bfd_demangle. (disassemble_section): Likewise. (dump_dymbols): Likewise. (main): Handle new options. * prdbg.c (demangle_flags): New static variable. (tg_variable): Pass demangle_flags to demangler. (tg_start_function): Likewise. * stabs.c (demangle_flags): New static variable. (stab_demangle_template): Pass demangle_flags to demangler. (stab_demangle_v3_argtypes): Likewise. (stab_demangle_v3_arg): Likewise. * doc/binutuls.texi: Document new command line options. * NEWS: Mention the new feature. * testsuite/config/default.exp (CXXFILT): Define if not already defined. (CXXFILTFLAGS): Likewise. * testsuite/binutils-all/cxxfilt.exp: New file. Runs a few simple tests of the cxxfilt program.	7 years ago
Alan Modra	bb6bf75e7a	PowerPC @l , @h and @ha warnings, plus VLE e_li This patch started off just adding the warnings in tc-ppc.c about incorrect usage of @l, @h and @ha in instructions that don't have 16-bit D-form fields. That unfortunately showed up three warnings in ld/testsuite/ld-powerpc/vle-multiseg.s on instructions like e_li r3, IV_table@l+0x00 which was being assembled to 8: 70 60 00 00 e_li r3,0 a: R_PPC_ADDR16_LO IV_table The ADDR16_LO reloc is of course completely bogus on e_li, which has a split 20-bit signed integer field in bits 0x1f7fff, the low 11 bit in 0x7ff, the next 5 bits in 0x1f0000, and the high 4 bits in 0x7800. Applying an ADDR16_LO reloc to the instruction potentially changes the e_li instruction to e_add2i., e_add2is, e_cmp16i, e_mull2i, e_cmpl16i, e_cmph16i, e_cmphl16i, e_or2i, e_and2i., e_or2is, e_lis, e_and2is, or some invalid encodings. Now there is a relocation that suits e_li, R_PPC_VLE_ADDR20, which was added 2017-09-05 but I can't see code in gas to generate the relocation. In any case, VLE_ADDR20 probably doesn't have the correct semantics for @l since ideally you'd want an @l to pair with @h or @ha to generate a 32-bit constant. Thus @l should only produce a 16-bit value, I think. So we need some more relocations to handle e_li it seems, or as I do in this patch, modify the behaviour of existing relocations when applied to e_li instructions. include/ * opcode/ppc.h (E_OPCODE_MASK, E_LI_MASK, E_LI_INSN): Define. bfd/ * elf32-ppc.c (ppc_elf_howto_raw <R_PPC_VLE_ADDR20>): Correct mask and shift value. (ppc_elf_vle_split16): Use E_OPCODE_MASK. Handle e_li specially. gas/ * config/tc-ppc.c (md_assemble): Adjust relocs for VLE before TLS tweaks. Handle e_li. Warn on unexpected operand field for lo16/hi16/ha16 relocs.	7 years ago
Andrew Burgess	884b49e3a9	opcodes/riscv: Hide '.L0 ' fake symbols The RISC-V assembler generates fake labels with the name '.L0 ' as part of the debug information (see gas/config/tc-riscv.h:FAKE_LABEL_NAME). The problem is that currently, when disassembling an object file, the output looks like this (this is an example from the GDB testsuite, but is pretty representative of anything with debug information): 000000000000001e <main>: 1e: 7179 addi sp,sp,-48 20: f406 sd ra,40(sp) 22: f022 sd s0,32(sp) 24: 1800 addi s0,sp,48 0000000000000026 <.L0 >: 26: 87aa mv a5,a0 28: feb43023 sd a1,-32(s0) 2c: fcc43c23 sd a2,-40(s0) 30: fef42623 sw a5,-20(s0) 0000000000000034 <.L0 >: 34: fec42783 lw a5,-20(s0) 38: 0007871b sext.w a4,a5 3c: 678d lui a5,0x3 3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d> 42: 02f71463 bne a4,a5,6a <.L0 > 0000000000000046 <.L0 >: 46: 000007b7 lui a5,0x0 4a: 0007b783 ld a5,0(a5) # 0 <need_malloc> 4e: 6f9c ld a5,24(a5) 0000000000000050 <.L0 >: 50: 86be mv a3,a5 52: 466d li a2,27 54: 4585 li a1,1 56: 000007b7 lui a5,0x0 5a: 00078513 mv a0,a5 5e: 00000097 auipc ra,0x0 62: 000080e7 jalr ra # 5e <.L0 +0xe> 0000000000000066 <.L0 >: 66: 4785 li a5,1 68: a869 j 102 <.L0 > 000000000000006a <.L0 >: 6a: 000007b7 lui a5,0x0 6e: 00078513 mv a0,a5 72: 00000097 auipc ra,0x0 76: 000080e7 jalr ra # 72 <.L0 +0x8> The frequent repeated '.L0 ' labels are pointless, as they are non-unique there's no way to match a use of '.L0 ' to its appearence in the output, so we'd be better off just not printing it at all. That's what this patch does by defining a 'symbol_is_valid' method for RISC-V. With this commit, the same disassembly now looks like this: 000000000000001e <main>: 1e: 7179 addi sp,sp,-48 20: f406 sd ra,40(sp) 22: f022 sd s0,32(sp) 24: 1800 addi s0,sp,48 26: 87aa mv a5,a0 28: feb43023 sd a1,-32(s0) 2c: fcc43c23 sd a2,-40(s0) 30: fef42623 sw a5,-20(s0) 34: fec42783 lw a5,-20(s0) 38: 0007871b sext.w a4,a5 3c: 678d lui a5,0x3 3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d> 42: 02f71463 bne a4,a5,6a <.L4> 46: 000007b7 lui a5,0x0 4a: 0007b783 ld a5,0(a5) # 0 <need_malloc> 4e: 6f9c ld a5,24(a5) 50: 86be mv a3,a5 52: 466d li a2,27 54: 4585 li a1,1 56: 000007b7 lui a5,0x0 5a: 00078513 mv a0,a5 5e: 00000097 auipc ra,0x0 62: 000080e7 jalr ra # 5e <main+0x40> 66: 4785 li a5,1 68: a869 j 102 <.L5> 000000000000006a <.L4>: 6a: 000007b7 lui a5,0x0 6e: 00078513 mv a0,a5 72: 00000097 auipc ra,0x0 76: 000080e7 jalr ra # 72 <.L4+0x8> In order to share the fake label between the assembler and the libopcodes library, I've added some new defines RISCV_FAKE_LABEL_NAME and RISCV_FAKE_LABEL_CHAR in include/opcode/riscv.h. I could have just moved FAKE_LABEL_NAME to the include file, however, I thnk this would be confusing, someone working on the assembler would likely not expect to find FAKE_LABEL_NAME defined outside of the assembler source tree. By introducing the RISCV_FAKE_LABEL_* defines I can leave the assembler standard FAKE_LABEL_ defines in the assembler source, but still share the RISCV_FAKE_LABEL_* with libopcodes. gas/ChangeLog: * config/tc-riscv.h (FAKE_LABEL_NAME): Define as RISCV_FAKE_LABEL_NAME. (FAKE_LABEL_CHAR): Define as RISCV_FAKE_LABEL_CHAR. include/ChangeLog: * dis-asm.h (riscv_symbol_is_valid): Declare. * opcode/riscv.h (RISCV_FAKE_LABEL_NAME): Define. (RISCV_FAKE_LABEL_CHAR): Define. opcodes/ChangeLog: * disassembler.c (disassemble_init_for_target): Add RISC-V initialisation. * riscv-dis.c (riscv_symbol_is_valid): New function.	7 years ago
Jim Wilson	1080bf78c0	RISC-V: Accept version, supervisor ext and more than one NSE for -march. This patch moves all -march parsing logic into bfd, because we will use this code in ELF attributes. bfd/ * elfxx-riscv.h (RISCV_DONT_CARE_VERSION): New macro. (struct riscv_subset_t): New structure. (riscv_subset_t): New typedef. (riscv_subset_list_t): New structure. (riscv_release_subset_list): New prototype. (riscv_add_subset): Likewise. (riscv_lookup_subset): Likewise. (riscv_lookup_subset_version): Likewise. (riscv_release_subset_list): Likewise. * elfxx-riscv.c: Include safe-ctype.h. (riscv_parsing_subset_version): New function. (riscv_supported_std_ext): Likewise. (riscv_parse_std_ext): Likewise. (riscv_parse_sv_or_non_std_ext): Likewise. (riscv_parse_subset): Likewise. (riscv_add_subset): Likewise. (riscv_lookup_subset): Likewise. (riscv_lookup_subset_version): Likewise. (riscv_release_subset_list): Likewise. gas/ * config/tc-riscv.c: Include elfxx-riscv.h. (struct riscv_subset): Removed. (riscv_subsets): Change type to riscv_subset_list_t. (riscv_subset_supports): Removed argument: xlen_required and move logic into libbfd. (riscv_multi_subset_supports): Removed argument: xlen_required. (riscv_clear_subsets): Removed. (riscv_add_subset): Ditto. (riscv_set_arch): Extract parsing logic into libbfd. (riscv_ip): Update argument for riscv_multi_subset_supports and riscv_subset_supports. Update riscv_subsets due to struct definition changed. (riscv_after_parse_args): Update riscv_subsets due to struct definition changed, update and argument for riscv_subset_supports. * testsuite/gas/riscv/empty.s: New. * testsuite/gas/riscv/march-fail-rv32ef.d: Likewise. * testsuite/gas/riscv/march-fail-rv32ef.l: Likewise. * testsuite/gas/riscv/march-fail-rv32i.d: Likewise. * testsuite/gas/riscv/march-fail-rv32i.l: Likewise. * testsuite/gas/riscv/march-fail-rv32iam.d: Likewise. * testsuite/gas/riscv/march-fail-rv32iam.l: Likewise. * testsuite/gas/riscv/march-fail-rv32ic.d: Likewise. * testsuite/gas/riscv/march-fail-rv32ic.l: Likewise. * testsuite/gas/riscv/march-fail-rv32icx2p.d: Likewise. * testsuite/gas/riscv/march-fail-rv32icx2p.l: Likewise. * testsuite/gas/riscv/march-fail-rv32imc.d: Likewise. * testsuite/gas/riscv/march-fail-rv32imc.l: Likewise. * testsuite/gas/riscv/march-fail-rv64I.d: Likewise. * testsuite/gas/riscv/march-fail-rv64I.l: Likewise. * testsuite/gas/riscv/march-fail-rv64e.d: Likewise. * testsuite/gas/riscv/march-fail-rv64e.l: Likewise. * testsuite/gas/riscv/march-ok-g2.d: Likewise. * testsuite/gas/riscv/march-ok-g2p0.d: Likewise. * testsuite/gas/riscv/march-ok-i2p0.d: Likewise. * testsuite/gas/riscv/march-ok-nse-with-version.: Likewise.d * testsuite/gas/riscv/march-ok-s-with-version.d: Likewise. * testsuite/gas/riscv/march-ok-s.d: Likewise. * testsuite/gas/riscv/march-ok-sx.d: Likewise. * testsuite/gas/riscv/march-ok-two-nse.d: Likewise. * testsuite/gas/riscv/march-ok-g2_p1.d: Likewise. * testsuite/gas/riscv/march-ok-i2p0m2_a2f2.d: Likewise. include/ * opcode/riscv.h (riscv_opcode): Change type of xlen_requirement to unsigned. opcodes/ * riscv-opc.c: Change the type of xlen, because type of xlen_requirement changed.	7 years ago
Jim Wilson	4765cd6119	RISC-V: Add .insn CA support. gas/ * config/tc-riscv.c (validate_riscv_insn) <'F'>: Add support for CF6 and CF2 operands. (riscv_ip) <'F'>: Likewise. * doc/c-riscv.texi (RISC-V-Formats): Add func6 abbreviation. Use rs2 instead of rs1 in CR description. Add CA docs. * gas/testsuite/riscv/insn.s: Add use of .insn ca. * gas/testsuite/riscv/insn.d: Update to match. include/ * opcode/riscv.h (OP_MASK_CFUNCT6, OP_SH_CFUNCT6): New. (OP_MASK_CFUNCT2, OP_SH_CFUNCT2): New. opcodes/ * riscv-opc.c (ciw): Fix whitespace to align columns. (ca): New.	7 years ago
Thomas Preud'homme	497d849d28	[ARM] Improve indentation of ARM architecture declarations This commit cleans up indentation of ARM architecture declaration, namely entries of arm_archs and definition of macros ARM_EXT_, ARM_AEXT_, ARM_AEXT2_, FPU_EXT_, FPU_ARCH_* and ARM_ARCH_. It also gets rid of unused ARM_ARCH_V6M-ONLY and merge AEM_AEXT_V6M_ONLY in ARM_AEXT_V6M now sole user. gas/ 2018-11-13 Thomas Preud'homme <thomas.preudhomme@arm.com> config/tc-arm.c (arm_archs): Reindent. include/ 2018-11-13 Thomas Preud'homme <thomas.preudhomme@arm.com> * opcode/arm.h (ARM_AEXT_V6M_ONLY): Merge into its use in ARM_AEXT_V6M. (ARM_ARCH_V6M_ONLY): Remove. (ARM_EXT_V1, ARM_EXT_V2, ARM_EXT_V2S, ARM_EXT_V3, ARM_EXT_V3M, ARM_EXT_V4, ARM_EXT_V4T, ARM_EXT_V5, ARM_EXT_V5T, ARM_EXT_V5ExP, ARM_EXT_V5E, ARM_EXT_V5J, ARM_EXT_V6, ARM_EXT_V6K, ARM_EXT_V8, ARM_EXT_V6T2, ARM_EXT_DIV, ARM_EXT_V5E_NOTM, ARM_EXT_V6_NOTM, ARM_EXT_V7, ARM_EXT_V7A, ARM_EXT_V7R, ARM_EXT_V7M, ARM_EXT_V6M, ARM_EXT_BARRIER, ARM_EXT_THUMB_MSR, ARM_EXT_V6_DSP, ARM_EXT_MP, ARM_EXT_SEC, ARM_EXT_OS, ARM_EXT_ADIV, ARM_EXT_VIRT, ARM_EXT2_PAN, ARM_EXT2_V8_2A, ARM_EXT2_V8M, ARM_EXT2_ATOMICS, ARM_EXT2_V6T2_V8M, ARM_EXT2_FP16_INST, ARM_EXT2_V8M_MAIN, ARM_EXT2_RAS, ARM_EXT2_V8_3A, ARM_EXT2_V8A, ARM_EXT2_V8_4A, ARM_EXT2_FP16_FML, ARM_EXT2_V8_5A, ARM_EXT2_SB, ARM_EXT2_PREDRES, ARM_CEXT_XSCALE, ARM_CEXT_MAVERICK, ARM_CEXT_IWMMXT, ARM_CEXT_IWMMXT2, FPU_ENDIAN_PURE, FPU_ENDIAN_BIG, FPU_FPA_EXT_V1, FPU_FPA_EXT_V2, FPU_MAVERICK, FPU_VFP_EXT_V1xD, FPU_VFP_EXT_V1, FPU_VFP_EXT_V2, FPU_VFP_EXT_V3xD, FPU_VFP_EXT_V3, FPU_NEON_EXT_V1, FPU_VFP_EXT_D32, FPU_VFP_EXT_FP16, FPU_NEON_EXT_FMA, FPU_VFP_EXT_FMA, FPU_VFP_EXT_ARMV8, FPU_NEON_EXT_ARMV8, FPU_CRYPTO_EXT_ARMV8, CRC_EXT_ARMV8, FPU_VFP_EXT_ARMV8xD, FPU_NEON_EXT_RDMA, FPU_NEON_EXT_DOTPROD, ARM_AEXT_V1, ARM_AEXT_V2, ARM_AEXT_V2S, ARM_AEXT_V3, ARM_AEXT_V3M, ARM_AEXT_V4xM, ARM_AEXT_V4, ARM_AEXT_V4TxM, ARM_AEXT_V4T, ARM_AEXT_V5xM, ARM_AEXT_V5, ARM_AEXT_V5TxM, ARM_AEXT_V5T, ARM_AEXT_V5TExP, ARM_AEXT_V5TE, ARM_AEXT_V5TEJ, ARM_AEXT_V6, ARM_AEXT_V6K, ARM_AEXT_V6Z, ARM_AEXT_V6KZ, ARM_AEXT_V6T2, ARM_AEXT_V6KT2, ARM_AEXT_V6ZT2, ARM_AEXT_V6KZT2, ARM_AEXT_V7_ARM, ARM_AEXT_V7A, ARM_AEXT_V7VE, ARM_AEXT_V7R, ARM_AEXT_NOTM, ARM_AEXT_V6M_ONLY, ARM_AEXT_V6M, ARM_AEXT_V6SM, ARM_AEXT_V7M, ARM_AEXT_V7, ARM_AEXT_V7EM, ARM_AEXT_V8A, ARM_AEXT2_V8A, ARM_AEXT2_V8_1A, ARM_AEXT2_V8_2A, ARM_AEXT2_V8_3A, ARM_AEXT2_V8_4A, ARM_AEXT2_V8_5A, ARM_AEXT_V8M_BASE, ARM_AEXT_V8M_MAIN, ARM_AEXT_V8M_MAIN_DSP, ARM_AEXT2_V8M, ARM_AEXT2_V8M_BASE, ARM_AEXT2_V8M_MAIN, ARM_AEXT2_V8M_MAIN_DSP, ARM_AEXT_V8R, ARM_AEXT2_V8R, FPU_VFP_V1xD, FPU_VFP_V1, FPU_VFP_V2, FPU_VFP_V3D16, FPU_VFP_V3, FPU_VFP_V3xD, FPU_VFP_V4D16, FPU_VFP_V4, FPU_VFP_V4_SP_D16, FPU_VFP_V5D16, FPU_VFP_ARMV8, FPU_NEON_ARMV8, FPU_CRYPTO_ARMV8, FPU_VFP_HARD, FPU_FPA, FPU_ARCH_VFP, FPU_ARCH_FPE, FPU_ARCH_FPA, FPU_ARCH_VFP_V1xD, FPU_ARCH_VFP_V1, FPU_ARCH_VFP_V2, FPU_ARCH_VFP_V3D16_FP16, FPU_ARCH_VFP_V3, FPU_ARCH_VFP_V3_FP16, FPU_ARCH_VFP_V3xD_FP16, FPU_ARCH_NEON_V1, FPU_ARCH_VFP_V3_PLUS_NEON_V1, FPU_ARCH_NEON_FP16, FPU_ARCH_VFP_HARD, FPU_ARCH_VFP_V4, FPU_ARCH_VFP_V4D16, FPU_ARCH_VFP_V4_SP_D16, FPU_ARCH_VFP_V5D16, FPU_ARCH_VFP_V5_SP_D16, FPU_ARCH_NEON_VFP_V4, FPU_ARCH_VFP_ARMV8, FPU_ARCH_NEON_VFP_ARMV8, FPU_ARCH_CRYPTO_NEON_VFP_ARMV8, FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD, ARCH_CRC_ARMV8, FPU_ARCH_NEON_VFP_ARMV8_1, FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_1, FPU_ARCH_DOTPROD_NEON_VFP_ARMV8, ARM_ARCH_V1, ARM_ARCH_V2, ARM_ARCH_V2S, ARM_ARCH_V3, ARM_ARCH_V3M, ARM_ARCH_V4xM, ARM_ARCH_V4, ARM_ARCH_V4TxM, ARM_ARCH_V4T, ARM_ARCH_V5xM, ARM_ARCH_V5, ARM_ARCH_V5TxM, ARM_ARCH_V5T, ARM_ARCH_V5TExP, ARM_ARCH_V5TE, ARM_ARCH_V5TEJ, ARM_ARCH_V6, ARM_ARCH_V6K, ARM_ARCH_V6Z, ARM_ARCH_V6KZ, ARM_ARCH_V6T2, ARM_ARCH_V6KT2, ARM_ARCH_V6ZT2, ARM_ARCH_V6KZT2, ARM_ARCH_V6M, ARM_ARCH_V6SM, ARM_ARCH_V7, ARM_ARCH_V7A, ARM_ARCH_V7VE, ARM_ARCH_V7R, ARM_ARCH_V7M, ARM_ARCH_V7EM, ARM_ARCH_V8A, ARM_ARCH_V8A_CRC, ARM_ARCH_V8_1A, ARM_ARCH_V8_2A, ARM_ARCH_V8_3A, ARM_ARCH_V8_4A, ARM_ARCH_V8_5A, ARM_ARCH_V8M_BASE, ARM_ARCH_V8M_MAIN, ARM_ARCH_V8M_MAIN_DSP, ARM_ARCH_V8R): Reindent.	8 years ago
Sudakshina Das	503ba60025	[BINUTILS, AARCH64, 6/8] Add Tag getting instruction in Memory Tagging Extension This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Bulk Allocation Tag instructions from MTE. These are the following instructions added in this patch: - LDGV <Xt>, [<Xn\|SP>]! - STGV <Xt>, [<Xn\|SP>]! This needed a new kind of operand for the new addressing [<Xn\|SP>]! since this has no offset and only takes a pre-indexed version. Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced. (AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does not allow writeback). We also needed new encoding and decoding functions to be able to do the same. where <Xt> : Is the 64-bit destination GPR. <Xn\|SP> : Is the 64-bit first source GPR or Stack pointer. * include/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2. (aarch64_insn_class): Add ldstgv_indexed. * opcodes/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-asm.c (aarch64_ins_addr_simple_2): New. * aarch64-asm.h (ins_addr_simple_2): Declare the above. * aarch64-dis.c (aarch64_ext_addr_simple_2): New. * aarch64-dis.h (ext_addr_simple_2): Declare the above. * aarch64-opc.c (operand_general_constraint_met_p): Add case for AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed. (aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2. * aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv. (AARCH64_OPERANDS): Define ADDR_SIMPLE_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * gas/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it. (warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise.	8 years ago
Sudakshina Das	fb3265b371	[BINUTILS, AARCH64, 4/8] Add Tag setting instructions in Memory Tagging Extension This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Tag setting instructions from MTE which consists of the following instructions: - STG [<Xn\|SP>, #<simm>] - STG [<Xn\|SP>, #<simm>]! - STG [<Xn\|SP>], #<simm> - STZG [<Xn\|SP>, #<simm>] - STZG [<Xn\|SP>, #<simm>]! - STZG [<Xn\|SP>], #<simm> - ST2G [<Xn\|SP>, #<simm>] - ST2G [<Xn\|SP>, #<simm>]! - ST2G [<Xn\|SP>], #<simm> - STZ2G [<Xn\|SP>, #<simm>] - STZ2G [<Xn\|SP>, #<simm>]! - STZ2G [<Xn\|SP>], #<simm> - STGP <Xt>, <Xt2>, [<Xn\|SP>, #<imm>] - STGP <Xt>, <Xt2>, [<Xn\|SP>, #<imm>]! - STGP <Xt>, <Xt2>, [<Xn\|SP>], #<imm> where <Xn\|SP> : Is the 64-bit GPR or Stack pointer. <simm> : Is the optional signed immediate offset, a multiple of 16 in the range -4096 to 4080, defaulting to 0. * include/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13. (aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag. * opcodes/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_opnd_qualifiers): Add new data for AARCH64_OPND_QLF_imm_tag. (operand_general_constraint_met_p): Add case for AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_LDST_AT, QL_STGP): New. (aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp for both offset and pre/post indexed versions. (AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * gas/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13. (fix_insn): Likewise. (warn_unpredictable_ldst): Exempt STGP. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g, stzg, stz2g and stgp. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise.	8 years ago
Sudakshina Das	193614f2b9	[BINUTILS, AARCH64, 2/8] Add Tag generation instructions in Memory Tagging Extension This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Tag generation instructions from MTE. These are the following instructions added in this patch: - IRG <Xd\|SP>, <Xn\|SP>{, Xm} - ADDG <Xd\|SP>, <Xn\|SP>, #<uimm1>. #<uimm2> - SUBG <Xd\|SP>, <Xn\|SP>, #<uimm1>. #<uimm2> - GMI <Xd>, <Xn\|SP>, <Xm> where <Xd\|SP> : Is the 64-bit destination GPR or Stack pointer. <Xn\|SP> : Is the 64-bit source GPR or Stack pointer. <uimm6> : Is the unsigned immediate, a multiple of 16 in the range 0 to 1008. <uimm4> : Is the unsigned immediate, in the range 0 to 15. * include/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums. * opcodes/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3. (OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New. * aarch64-opc.c (fields): Add entry for imm4_3. (operand_general_constraint_met_p): Add cases for AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_ADDG): New. (aarch64_opcode_table): Add addg, subg, irg and gmi. (AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10. * aarch64-asm.c (aarch64_ins_imm): Add case for operand_need_shift_by_four. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * gas/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10. * testsuite/gas/aarch64/armv8_5-a-memtag.s: New. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.d: Likewise.	8 years ago
Sudakshina Das	73b605ec3f	[BINUTILS, AARCH64, 1/8] Add support for Memory Tagging Extension for ARMv8.5-A This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions. Memory Tagging Extension is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch adds the new command line option and the new feature macros. * include/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New. * opcodes/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_memtag): New. (MEMTAG, MEMTAG_INSN): New. * gas/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add "memtag" as a new option. * doc/c-aarch64.texi: Document the same.	8 years ago
Roman Bolshakov	fc7b364aba	Add support for new load commands added by Apple to the MACH-O file format. bfd * mach-o.h: Add new enums for BFD_MACH_O_PLATFORM_MACOS, BFD_MACH_O_PLATFORM_IOS, BFD_MACH_O_PLATFORM_TVOS, BFD_MACH_O_PLATFORM_WATCHOS, BFD_MACH_O_PLATFORM_BRIDGEOS, BFD_MACH_O_TOOL_CLANG, BFD_MACH_O_TOOL_SWIFT, BFD_MACH_O_TOOL_LD. (struct bfd_mach_o_note_command): New. (struct bfd_mach_o_build_version_tool): New. (struct bfd_mach_o_build_version_command): New. (bfd_mach_o_read_version_min): Don't split version into a few fields. Rename reserved to sdk. * mach-o.c (bfd_mach_o_read_version_min): Don't split version into a few fields. Rename reserved to sdk. (bfd_mach_o_read_command): Handle LC_VERSION_MIN_TVOS, LC_NOTE, LC_BUILD_VERSION. (bfd_mach_o_read_note): New. (bfd_mach_o_read_build_version): New. PR 23728 binutils* od-macho.c (printf_version): New. (dump_load_command): Use it to print version. Print sdk version. Print version info for watchOS and tvOS. Print LC_NOTE, LC_BUILD_VERSION. (dump_buld_version): New. (bfd_mach_o_platform_name): New (bfd_mach_o_tool_name): New * mach-o/external.h (mach_o_nversion_min_command_external): Rename reserved to sdk. (mach_o_note_command_external): New. (mach_o_build_version_command_external): New. * mach-o/loader.h (BFD_MACH_O_LC_VERSION_MIN_TVOS): Define. (BFD_MACH_O_LC_NOTE): Define.	8 years ago
Nick Clifton	ddea148b3d	Add support for a couple of new Mach-O commands. PR 23742 * mach-o.c (bfd_mach_o_read_command): Accept and ignore BFD_MACH_O_LC_LINKER_OPTIONS and BFD_MACH_O_LC_BUILD_VERSION commands. * mach-o/loader.h: Add BFD_MACH_O_LC_BUILD_VERSION.	8 years ago
Sudakshina Das	0632eeea6e	[BINUTILS, ARM] Add Armv8.5-A to select_arm_features and update macros. This patch addresses the following 1) Adding ARMv8.5-A in select_arm_features. 2) Updating the feature macro so that the new ARM_EXT2_* features for Armv8.5-A are moved to ARM_AEXT2_V8_5A. * opcodes/ChangeLog * 2018-11-06 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (select_arm_features): Update bfd_mach_arm_8 with Armv8.5-A. Remove reduntant ARM_EXT2_FP16_FML. * include/ChangeLog * 2018-11-06 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_ARCH_V8_5A): Move ARM_EXT2_PREDRES and ARM_EXT2_SB to ... (ARM_AEXT2_V8_5A): Here.	8 years ago
John Baldwin	d7ded98f4c	Support AT_HWCAP2 on FreeBSD. include/ChangeLog: * elf/common.h (AT_FREEBSD_HWCAP2): Define. gdb/ChangeLog: * fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_FREEBSD_HWCAP2.	8 years ago
Sudakshina Das	104fefeebb	[PATCH, BINUTULS, AARCH64, 9/9] Add SSBS to MSR/MRS This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) The encodings can be found in the System Register XML. This patch adds support for the mitigation for Spectre Variant 4 by adding the PSTATE bit SSBS which are accessible using MSR and MRS instructions. Although this is a mandatory addition to the ARMv8.5-A, it is permitted to be added to any version of the ARMv8 architecture. This is enabled using the command line option of +ssbs for older versions. * include/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SSBS): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SSBS by default. * opcodes/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (operand_general_constraint_met_p): Add SSBS in the check for one-bit immediate. (aarch64_sys_regs): New entry for SSBS. (aarch64_sys_reg_supported_p): New check for above. (aarch64_pstatefields): New entry for SSBS. (aarch64_pstatefield_supported_p): New check for above. * gas/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add new "ssbs". * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/ssbs-illegal1.d: New test. * testsuite/gas/aarch64/ssbs-illegal1.l: New test. * testsuite/gas/aarch64/ssbs-illegal2.d: New test. * testsuite/gas/aarch64/ssbs-illegal2.l: New test. * testsuite/gas/aarch64/ssbs.s: New test. * testsuite/gas/aarch64/ssbs1.d: Test with +ssbs * testsuite/gas/aarch64/ssbs2.d: Test with armv8.5-a.	8 years ago
Sudakshina Das	a97330e723	[PATCH, BINUTILS, AARCH64, 8/9] Add SCXTNUM_ELx and ID_PFR2_EL1 system registers This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) The encodings can be found in the System Register XML. This patch adds the new system registers SCXTNUM_ELx and ID_PFR2_EL1. * include/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SCXTNUM): New. (AARCH64_FEATURE_ID_PFR2): New. (AARCH64_ARCH_V8_5): Add both by default. * opcodes/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_sys_regs): New entries for scxtnum_el[0,1,2,3,12] and id_pfr2_el1. (aarch64_sys_reg_supported_p): New checks for above. * gas/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * testsuite/gas/aarch64/sysreg-4.s: Test registers scxtnum_el[0,1,2,3,12] and id_pfr2_el1. * testsuite/gas/aarch64/sysreg-4.d: Likewise. * testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.	8 years ago
Sudakshina Das	ff6054520c	[PATCH, BINUTILS, AARCH64, 7/9] Add BTI instruction This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/bti-branch-target-identification) The Branch Target Identification instructions (BTI) are allocated to existing HINT space, using HINT numbers 32, 34, 36, 38, such that bits[7:6] of the instruction identify the compatibility of the BTI instruction to different branches. BTI {<targets>} where <targets> one of the following, specifying which type of indirection is allowed: j : Can be a target of any BR Xn isntruction. c : Can be a target of any BLR Xn and BR {X16\|X17}. jc: Can be a target of any free branch. A BTI instruction without any <targets> is the strictest of all and can not be a target of nay free branch. * include/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_BTI): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_BTI by default. (aarch64_opnd): Add AARCH64_OPND_BTI_TARGET. (HINT_OPD_CSYNC, HINT_OPD_C, HINT_OPD_J): New macros to define HINT #imm values. (HINT_OPD_JC, HINT_OPD_NULL): Likewise. * opcodes/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New. (HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag with the hint immediate. * aarch64-opc.c (aarch64_hint_options): New entries for c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI. (aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET while checking for HINT_OPD_F_NOPRINT flag. * aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to extract value. * aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New. (aarch64_opcode_table): Add entry for BTI. (AARCH64_OPERANDS): Add new description for BTI targets. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. * gas/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_bti_operand): New. (process_omitted_operand): Add case for AARCH64_OPND_BTI_TARGET. (parse_operands): Likewise. * testsuite/gas/aarch64/system.d: Update for BTI. * testsuite/gas/aarch64/bti.s: New. * testsuite/gas/aarch64/bti.d: New. * testsuite/gas/aarch64/illegal-bti.d: New. * testsuite/gas/aarch64/illegal-bti.l: New.	8 years ago
Sudakshina Das	af4bcb4ce6	[PATCH, BINUTILS, AARCH64, 6/9] Add Random number instructions This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) The encodings can be found in the System Register XML. This patch adds the following: MSR Xn, RNDR MSR Xn, RNDRRS These are optional instructions in ARMv8.5-A and hence the new +rng is added. * include/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_RNG): New. * opcodes/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_sys_regs): New entries for rndr and rndrrs. (aarch64_sys_reg_supported_p): New check for above. * gas/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): New "rng" option. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sysreg-4.s: Test both instructions. * testsuite/gas/aarch64/sysreg-4.d: Likewise. * testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.	8 years ago
Sudakshina Das	3fd229a447	[PATCH, BINUTILS, AARCH64, 5/9] Add DC CVADP instruction This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/dc-data-cache-operation-an-alias-of-sys) This patch adds the DC CVADP instruction. Since this has a separate identification mechanism a new feature bit is added. * include/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_CVADP): New. * opcodes/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_sys_regs_dc): New entry for cvadp. (aarch64_sys_ins_reg_supported_p): New check for above. * gas/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * testsuite/gas/aarch64/sysreg-4.s: Test instruction. * testsuite/gas/aarch64/sysreg-4.d: Likewise. * testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.	8 years ago
Sudakshina Das	2ac435d466	[PATCH, BINUTILS, AARCH64, 4/9] Add Execution and Data Restriction instructions This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order) This patch adds the prediction restriction instructions (that is, cfp, dvp, cpp). These instructions are retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new +predres which can be used by the older architectures. * include/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default. (aarch64_opnd): Add AARCH64_OPND_SYSREG_SR. (aarch64_sys_regs_sr): Declare new table. * opcodes/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-dis.c (aarch64_ext_sysins_op): Add case for AARCH64_OPND_SYSREG_SR. * aarch64-opc.c (aarch64_print_operand): Likewise. (aarch64_sys_regs_sr): Define table. (aarch64_sys_ins_reg_supported_p): Check for RCTX with AARCH64_FEATURE_PREDRES. * aarch64-tbl.h (aarch64_feature_predres): New. (PREDRES, PREDRES_INSN): New. (aarch64_opcode_table): Add entries for cfp, dvp and cpp. (AARCH64_OPERANDS): Add new description for SYSREG_SR. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. * gas/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New. (parse_operands): Add entry for AARCH64_OPND_SYSREG_SR. (md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh with aarch64_sys_regs_sr. (aarch64_features): Add new "predres" option for older architectures. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sysreg-4.s: New. * testsuite/gas/aarch64/sysreg-4.d: New. * testsuite/gas/aarch64/illegal-sysreg-4.d: New. * testsuite/gas/aarch64/illegal-sysreg-4.l: New. * testsuite/gas/aarch64/predres.s: New. * testsuite/gas/aarch64/predres.d: New.	8 years ago
Sudakshina Das	68dfbb92ef	[PATCH, BINUTILS, AARCH64, 3/9] Add instruction SB for ARMv8.5-A This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order) This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence a new command line option of "+sb" is added for older architectures. * include/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SB): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default. * opcodes/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_sb): New. (SB, SB_INSN): New. (aarch64_opcode_table): Add entry for sb. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. * gas/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add new "sb" option for older architectures. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sb.s: New. * testsuite/gas/aarch64/sb.d: New.	8 years ago
Sudakshina Das	13c60ad7e1	[PATCH, BINUTILS, AARCH64, 2/9] Add Data procoessing instructions for ARMv8.5-A This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order) This patch adds the data processing instructions that are new to ARMv8.5-A. 1) There are 2 instructions: xaflag, axflag, that are added to manipulate the states of the flag and are used to convert between the Arm representation and the fcmp representation. 2) The other instructions are rounding instructions which have 8 versions based on whether the floating-point number is a Single-Precision or Double-Precision number, whether the target integer is a 32-bit or 64-bit integer and whether the rounding mode is the ambient rounding mode or to zero. Each of these instruction is available in both Scalar and Vector forms. Since both 1) and 2) have separate identification mechanism and it is permissible that a ARMv8.4 compliant implementation may include any arbitrary subset of the ARMv8.5 features unless otherwise specified, new feature bits are added. * include/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_FLAGMANIP): New. (AARCH64_FEATURE_FRINTTS): New. (AARCH64_ARCH_V8_5): Add both by default. * opcodes/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_flagmanip): New. (aarch64_feature_frintts): New. (FLAGMANIP, FRINTTS): New. (aarch64_opcode_table): Add entries for xaflag, axflag and frint[32,64][x,z] instructions. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. * gas/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * testsuite/gas/aarch64/armv8_5-a-dp.s: New. * testsuite/gas/aarch64/armv8_5-a-dp.d: New.	8 years ago
Sudakshina Das	70d561813c	[PATCH, BINUTILS, AARCH64, 1/9] Add -march=armv8.5-a and related internal feature macros This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This is the first of the patch series and adds -march=armv8.5-a and other internal feature marcos needed for it. 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a. * doc/c-aarch64.texi: Add documentation for the same. * include/ChnageLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_5): New. (AARCH64_ARCH_V8_5): New. * opcodes/ChangeLog * 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New. (ARMV8_5, V8_5_INSN): New.	8 years ago
Alan Modra	64029e9368	Separate header PT_LOAD for -z separate-code This patch, along with previous patches in the series, supports putting the ELF file header and program headers in a PT_LOAD without sections. Logic governing whether headers a loaded has changed a little: The primary reason to include headers is now the presence of SIZEOF_HEADERS in a linker script. However, to support scripts that may have reserved space for headers by hand, we continue to add headers whenever the first section address is past the end of headers modulo page size. include/ * bfdlink.h (struct bfd_link_info): Add load_phdrs field. bfd/ * elf-nacl.c (nacl_modify_segment_map): Cope with header PT_LOAD lacking sections. * elf.c (_bfd_elf_map_sections_to_segments): Assume file and program headers are required when info->load_phdrs. Reorganize code handling program headers. Generate a mapping without sections just for file and program headers when -z separate-code would indicate they should be on a different page to the first section. ld/ * ldexp.c (fold_name <SIZEOF_HEADERS>): Set link_info.load_phdrs. * testsuite/ld-elf/loadaddr1.d: Pass -z noseparate-code. * testsuite/ld-elf/loadaddr2.d: Likewise. * testsuite/ld-i386/vxworks2.sd: Adjust expected output. * testsuite/ld-powerpc/vxworks2.sd: Likewise. * testsuite/ld-elf/overlay.d: Remove spu xfail. * testsuite/ld-spu/ovl.lnk: Don't use SIZEOF_HEADERS. * testsuite/ld-tic6x/dsbt-be.ld: Likewise. * testsuite/ld-tic6x/dsbt-inrange.ld: Likewise. * testsuite/ld-tic6x/dsbt-overflow.ld: Likewise. * testsuite/ld-tic6x/dsbt.ld: Likewise.	8 years ago
Sudakshina Das	dad0c3bfb5	[Arm, 3/3] Add Execution and Data Prediction instructions for AArch32 This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This patch adds the Execution and Data Prediction Restriction instructions (that is, cfprctx, dvprxtc, cpprctx). These are all aliases to MCR and are disassembled as such. This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new +predres for older versions of the architecture. * include/ChangeLog * 2018-10-05 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_EXT2_PREDRES): New. (ARM_ARCH_V8_5A): Add ARM_EXT2_PREDRES by default. * gas/ChangeLog * 2018-10-05 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (arm_ext_predres): New. (insns): Add new cfprctx, dvprctx and cpprctx instructions. (arm_extensions): Add "predres". * doc/c-arm.texi: Document the above. * testsuite/gas/arm/predres-bad.d: New test. * testsuite/gas/arm/predres-bad.l: New test. * testsuite/gas/arm/predres.s: New test. * testsuite/gas/arm/predres1.d: New test. * testsuite/gas/arm/predres2.d: New test.	8 years ago
Sudakshina Das	7fadb25d6f	[Arm, 2/3] Add instruction SB for AArch32 This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This patch adds the instruction SB. This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new "+sb" for older archtectures. * include/ChangeLog * 2018-10-05 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_EXT2_SB): New. (ARM_ARCH_V8_5A): Add ARM_EXT2_SB by default. * opcodes/ChangeLog * 2018-10-05 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (arm_opcodes): Add sb. (thumb32_opcodes): Likewise. * gas/ChangeLog * 2018-10-05 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (arm_ext_sb): New. (insns): Add new sb instruction. (arm_extensions): Add "sb". * doc/c-arm.texi: Document the above. * testsuite/gas/arm/sb-bad.d: New test. * testsuite/gas/arm/sb-bad.l: New test. * testsuite/gas/arm/sb-thumb1.d: New test. * testsuite/gas/arm/sb-thumb2.d: New test. * testsuite/gas/arm/sb.s: New test. * testsuite/gas/arm/sb1.d: New test. * testsuite/gas/arm/sb2.d: New test.	8 years ago
Sudakshina Das	23f233a595	[Arm, 1/3] Add -march=armv8.5-a and related internal feature macros to AArch32 This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This is the first of the patch series and adds -march=armv8.5-a and other internal feature marcos needed for it. * gas/ChangeLog * 2018-10-05 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (arm_archs): New entry for armv8.5-a. (cpu_arch_ver): Likewise. * doc/c-arm.texi: Add documentation for the same. * testsuite/gas/arm/attr-march-armv8_5-a.d: New. * include/ChnageLog * 2018-10-05 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_EXT2_V8_5A): New. (ARM_AEXT2_V8_5A, ARM_ARCH_V8_5A): New.	8 years ago
Stafford Horne	c8e98e3692	or1k: Add the l.adrp insn and supporting relocations This patch adds the new instruction and relocation as per proposal: https://openrisc.io/proposals/ladrp This is to be added to the spec in an upcoming revision. The new instruction l.adrp loads the page offset of the current instruction offset by a 21-bit immediate shifted left 13-bits. This is meant to be used with a 13-bit lower bit page offset. This allows us to free up the got register r16. l.adrp r3, foo l.ori r4, r3, po(foo) l.lbz r5, po(foo)(r3) l.sb po(foo)(r3), r6 The relocations we add are: - BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry asm: plta() implemented using l.ardp, meaning no need for r16 (the GOT reg) - BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address asm: got() - BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General asm: tlsgd() Dynamic calculation - BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local asm: tlsldm() dynamic calculation - BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial asm: gottp() Executable calculation - BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp instructions) - BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation asm: po() i.e. mem loads, addi etc - BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation asm: po() i.e. mem stores, with split immediate - BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs asm: gotpo() - BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs asm: tlsgdpo() - BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs asm: tlsldmpo() - BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs asm: gottppo() bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * bfd-in2.h: Regenerated. * elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. (or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26. (elf_or1k_link_hash_table): Add field saw_plta. (or1k_final_link_relocate): Add value calculations for new relocations. (or1k_elf_relocate_section): Add section relocations for new relocations. (or1k_write_plt_entry): New function. (or1k_elf_finish_dynamic_sections): Add support for PLTA relocations using new l.adrp instruction. Cleanup PLT relocation code generation. * libbfd.h: Regenerated. * reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc (parse_disp26): Add support for plta() relocations. (parse_disp21): New function. (or1k_rclass): New enum. (or1k_rtype): New enum. (or1k_imm16_relocs): Define new PO and SPO relocation mappings. (parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations. (parse_imm16): Add support for the new 21bit and 13bit relocations. * or1korbis.cpu (f-disp26): Don't assume SI. (f-disp21): New pc-relative 21-bit 13 shifted to right. (insn-opcode): Add ADRP. (l-adrp): New instruction. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. * testsuite/gas/or1k/allinsn.s: Add test for l.adrp. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions. * testsuite/gas/or1k/reloc-1.s: Add tests to generate R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13 relocations. * testsuite/gas/or1k/reloc-1.d: Add relocation results for tests. * testsuite/gas/or1k/reloc-2.s: Add negative tests for store to gotpo(). * testsuite/gas/or1k/reloc-2.l: Add expected error test results. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/or1k.exp: Add test cases for plt generation. * testsuite/ld-or1k/plt1.dd: New file. * testsuite/ld-or1k/plt1.s: New file. * testsuite/ld-or1k/plt1.x.dd: New file. * testsuite/ld-or1k/plta1.dd: New file. * testsuite/ld-or1k/plta1.s: New file. * testsuite/ld-or1k/pltlib.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerated. * or1k-desc.c: Regenerated. * or1k-desc.h: Regenerated. * or1k-dis.c: Regenerated. * or1k-ibld.c: Regenerated. * or1k-opc.c: Regenerated. * or1k-opc.h: Regenerated. * or1k-opinst.c: Regenerated.	8 years ago
Richard Henderson	1c4f3780f7	or1k: Add relocations for high-signed and low-stores This patch adds the following target relocations: - BFD_RELOC_HI16_S High 16-bit relocation, for used with signed asm: ha() lower. - BFD_RELOC_HI16_S_GOTOFF High 16-bit GOT offset relocation for local asm: gotoffha() symbols, for use with signed lower. - BFD_RELOC_OR1K_TLS_IE_AHI16 High 16-bit TLS relocation with initial asm: gottpoffha() executable calculation, for use with signed lower. - BFD_RELOC_OR1K_TLS_LE_AHI16 High 16-bit TLS relocation for local executable asm: tpoffha() variables, for use with signed lower. - BFD_RELOC_OR1K_SLO16 Split lower 16-bit relocation, used with asm: lo() OpenRISC store instructions. - BFD_RELOC_OR1K_GOTOFF_SLO16 Split lower 16-bit GOT offset relocation for asm: gotofflo() local symbols, used with OpenRISC store instructions. - BFD_RELOC_OR1K_TLS_LE_SLO16 Split lower 16-bit relocation for TLS local asm: tpofflo() executable variables, used with OpenRISC store instructions. bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * bfd-in2.h: Regenerated. * elf32-or1k.c (N_ONES): New macro. (or1k_elf_howto_table): Fix R_OR1K_PLT26 to complain on overflow. Add definitions for R_OR1K_TLS_TPOFF, R_OR1K_TLS_DTPOFF, R_OR1K_TLS_DTPMOD, R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. (or1k_reloc_map): Add entries for BFD_RELOC_HI16_S, BFD_RELOC_LO16_GOTOFF, BFD_RELOC_HI16_GOTOFF, BFD_RELOC_HI16_S_GOTOFF, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_LE_SLO16. (or1k_reloc_type_lookup): Change search loop to start ad index 0 and also check results before returning. (or1k_reloc_name_lookup): Simplify loop to use R_OR1K_max as index limit. (or1k_final_link_relocate): New function. (or1k_elf_relocate_section): Add support for new AHI and SLO relocations. Use or1k_final_link_relocate instead of generic _bfd_final_link_relocate. (or1k_elf_check_relocs): Add support for new AHI and SLO relocations. * reloc.c: Add new enums for BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_TLS_LE_SLO16. Remove unused BFD_RELOC_OR1K_GOTOFF_HI16 and BFD_RELOC_OR1K_GOTOFF_LO16. * libbfd.h: Regenerated. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc: Add RTYPE_ enum. (INVALID_STORE_RELOC): New string. (or1k_imm16_relocs): New array array. (parse_reloc): New static function that just does the parsing. (parse_imm16): New static function for generic parsing. (parse_simm16): Change to just call parse_imm16. (parse_simm16_split): New function. (parse_uimm16): Change to call parse_imm16. (parse_uimm16_split): New function. * or1korbis.cpu (simm16-split): Change to use new simm16_split. (uimm16-split): Change to use new uimm16_split. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/gas/or1k/allinsn.d (l_ha): Add result for ha() relocation. * testsuite/gas/or1k/allinsn.s (l_ha): Add test for ha() relocations. * testsuite/gas/or1k/allinsn.exp: Renamed to or1k.exp. * testsuite/gas/or1k/or1k.exp: Add reloc-2 list test. * testsuite/gas/or1k/reloc-1.d: New file. * testsuite/gas/or1k/reloc-1.s: New file. * testsuite/gas/or1k/reloc-2.l: New file. * testsuite/gas/or1k/reloc-2.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/offsets1.d: New file. * testsuite/ld-or1k/offsets1.s: New file. * testsuite/ld-or1k/or1k.exp: New file. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerate.	8 years ago
Tamar Christina	a68f4cd235	AArch64: Add SVE constraints verifier. This patch adds the verification rules for move prefix constraints. The Arm SVE instruction MOVPRFX introduces[1] constraints on the instruction at PC+4. Particularly the following constraints are handled by this patch * MOVPRFX must be followed by an instruction. * MOVPRFX can only be followed by non-layout altering directives. * MOVPRFX destination register MUST be used as the destination register in the instruction at PC+4, and is not allowed to be used in any other position other than destructive input. This includes registers that architecturally overlap. e.g. x1 should be treated as z1. * MOVPRFX must be followed by a restricted set of SVE instructions. * The size of the destination register of MOVPRFX must be equal to that of the operation at PC+4. * The predicate register and operation of MOVPRFX must match that of the instruction at PC+4 * The predicated instruction at PC+4 must use the merging predicate. * Architectural aliases and pseudo-instructions need to be supported as well. * MOVPRFX cannot be the last instruction in a sequence Any failure to adhere to any of these constrains will emit an assembly warning and a disassembly note. [1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a include/ * opcode/aarch64.h (aarch64_inst): Remove. (enum err_type): Add ERR_VFI. (aarch64_is_destructive_by_operands): New. (init_insn_sequence): New. (aarch64_decode_insn): Remove param name. opcodes/ * aarch64-opc.c (init_insn_block): New. (verify_constraints, aarch64_is_destructive_by_operands): New. * aarch64-opc.h (verify_constraints): New. gas/ * config/tc-aarch64.c (output_operand_error_report): Order warnings.	8 years ago
Tamar Christina	755b748fd9	AArch64: Refactor verifiers to make more general. The current verifiers only take an instruction description and encoded value as arguments. This was enough when the verifiers only needed to do simple checking but it's insufficient for the purposes of validating instruction sequences. This patch adds the required arguments and also a flag to allow a verifier to distinguish between whether it's being run during encoding or decoding. It also allows for errors and warnings to be returned by a verifier instead of a simple pass/fail. include/ * opcode/aarch64.h (struct aarch64_opcode): Expand verifiers to take more arguments. opcodes/ * aarch64-dis.c (aarch64_opcode_decode): Update verifier call. * aarch64-opc.c (verify_ldpsw): Update arguments.	8 years ago
Tamar Christina	1d4823943d	AArch64: Refactor err_type. Previously the ERR_ values were defined as different constants, to make this a bit more type safe and so they can be more easily re-used I'm changing them into an actual enum and updating any usages. include/ * opcode/aarch64.h (enum err_type): New. (aarch64_decode_insn): Use it. opcodes/ * aarch64-dis.c (ERR_OK, ERR_UND, ERR_UNP, ERR_NYI): Remove. (aarch64_decode_insn, print_insn_aarch64_word): Use err_type.	8 years ago
Tamar Christina	7e84b55d8f	AArch64: Wire through instr_sequence This patch introduces aarch64_instr_sequence which is a structure similar to IT blocks on Arm in order to track instructions that introduce a constraint or dependency on instruction 1..N positions away from the instruction that opened the block. The struct is also wired through to the locations that require it. gas/ * config/tc-aarch64.c (now_instr_sequence): (insn_sequence, now_instr_sequence): New. (output_operand_error_record, do_encode): Add insn_sequence. (md_assemble): Update insn_sequence. (try_to_encode_as_unscaled_ldst, fix_mov_imm_insn, fix_insn): Pass insn_sequence. config/tc-aarch64.h (struct aarch64_segment_info_type): Add insn_sequence. include/ * opcode/aarch64.h (struct aarch64_instr_sequence): New. (aarch64_opcode_encode): Use it. opcodes/ * aarch64-asm.c (aarch64_opcode_encode): Add insn_sequence. * aarch64-dis.c (insn_sequence): New.	8 years ago
Tamar Christina	eae424aef0	AArch64: Mark sve instructions that require MOVPRFX constraints This patch series is to allow certain instructions such as the SVE MOVPRFX instruction to apply a constraint/dependency on the instruction at PC+4. This patch starts this off by marking which instructions impose the constraint and which instructions must adhere to the constraint. This is done in a generic way by extending the verifiers. * The constraint F_SCAN indicates that an instruction opens a sequence and imposes a constraint on an instructions following it. The length of the sequence depends on the instruction itself and it handled in the verifier code. * The C_SCAN_MOVPRFX flag is used to indicate which constrain the instruction is checked against. An instruction with both F_SCAN and C_SCAN_MOVPRFX starts a block for the C_SCAN_MOVPRFX instruction, and one with only C_SCAN_MOVPRFX must adhere to a previous block constraint is applicable. The SVE instructions in this list have been marked according to the SVE specification[1]. [1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a include/ * opcode/aarch64.h (struct aarch64_opcode): Add constraints, extend flags field size. (F_SCAN, C_SCAN_MOVPRFX, C_MAX_ELEM): New. opcodes/ * aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN, _CRC_INSN, _LSE_INSN, _LOR_INSN, RDMA_INSN, FF16_INSN, SF16_INSN, V8_2_INSN, _SVE_INSN, V8_3_INSN, CNUM_INSN, RCPC_INSN, SHA2_INSN, AES_INSN, V8_4_INSN, SHA3_INSN, SM4_INSN, FP16_V8_2_INSN, DOT_INSN): Initialize constraints. (_SVE_INSNC): New. (struct aarch64_opcode): (fjcvtzs, ldpsw, ldpsw, esb, psb): Initialize constraints. (movprfx): Change _SVE_INSN into _SVE_INSNC, add C_SCAN_MOVPRFX and F_SCAN flags. (msb, mul, neg, not, orr, rbit, revb, revh, revw, sabd, scvtf, sdiv, sdivr, sdot, smax, smin, smulh, splice, sqadd, sqdecd, sqdech, sqdecp, sqdecw, sqincd, sqinch, sqincp, sqincw, sqsub, sub, subr, sxtb, sxth, sxtw, uabd, ucvtf, udiv, udivr, udot, umax, umin, umulh, uqadd, uqdecd, uqdech, uqdecp, uqdecw, uqincd, uqinch, uqincp, uqincw, uqsub, uxtb, uxth, uxtw, bic, eon, orn, mov, fmov): Change _SVE_INSN into _SVE_INSNC and add C_SCAN_MOVPRFX and C_MAX_ELEM constraints.	8 years ago
John Darrington	007d2fe43e	Make print_insn_s12z public. Gdb can use this function in its stack unwinder. * include/dis-asm.h (print_insn_s12z): Add declaration.	8 years ago
Palmer Dabbelt	64a336ac13	RISC-V: Add fence.tso instruction The RISC-V memory model has been ratified, and it includes an additional fence: "fence.tso". This pseudo instruction extends one of the previously reserved full fence patterns to be less restrictive, and therefor will execute correctly on all existing microarchitectures. Thus there is no reason to allow this instruction to be disabled (or unconverted to a full fence), so it's just unconditionally allowed. I've added a test case for GAS to check that "fence.tso" correctly assembles on rv32i-based targets. I checked to see that "fence.tso" appears in "gas.log", but that's the only testing I've done. gas/ChangeLog 2018-10-02 Palmer Dabbelt <palmer@sifive.com> * testsuite/gas/riscv/fence-tso.d: New file. * testsuite/gas/riscv/fence-tso.s: Likewise. include/ChangeLog 2018-10-02 Palmer Dabbelt <palmer@sifive.com> * opcode/riscv-opc.h (MATCH_FENCE_TSO): New define. (MASK_FENCE_TSO): Likewise. opcodes/ChangeLog 2018-10-02 Palmer Dabbelt <palmer@sifive.com> * riscv-opc.c (riscv_opcodes) <fence.tso>: New opcode.	8 years ago
Cupertino Miranda	eb528ad18b	[ARC] Entries to Changelog for previous commits.	8 years ago
H.J. Lu	95475e5d6b	ELF: Don't include zero size sections at start of PT_NOTE segment We shouldn't include zero size sections at start of PT_NOTE segment, similar to PT_DYNAMIC segment. PR binutils/23694 * include/elf/internal.h (ELF_SECTION_IN_SEGMENT_1): Don't include zero size sections at start of PT_NOTE segment.	8 years ago
Nick Clifton	fbaf61ad52	Andes Technology has good news for you, we plan to update the nds32 port of binutils on upstream! We have not only removed all unsupported and obsolete code, but also supported lost of new features, including better link-time relaxations and TLS implementations. Besides, the files generated by the newly assembler and linker usually get higher performance and more optimized code size. ld * emultempl/nds32elf.em (hyper_relax): New variable. (nds32_elf_create_output_section_statements): the parameters of bfd_elf32_nds32_set_target_option (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax. * emultempl/nds32elf.em (nds32_elf_after_open): Updated. * emultempl/nds32elf.em (tls_desc_trampoline): New variable. * (nds32_elf_create_output_section_statements): Updated. * (nds32_elf_after_parse): Disable relaxations when PIC is enable. * (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline. include * elf/nds32.h: Remove the unused target features. * dis-asm.h (disassemble_init_nds32): Declared. * elf/nds32.h (E_NDS32_NULL): Removed. (E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New. * opcode/nds32.h: Ident. (N32_SUB6, INSN_LW): New macros. (enum n32_opcodes): Updated. * elf/nds32.h: Doc fixes. * elf/nds32.h: Add R_NDS32_LSI. * elf/nds32.h: Add new relocations for TLS. gas * config/tc-nds32.c: Remove the unused target features. (nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp, nds32_set_elf_flags_by_insn, nds32_insert_relax_entry, nds32_apply_fix): Likewise. (nds32_no_ex9_begin): Removed. * config/tc-nds32.c (add_mapping_symbol_for_align, make_mapping_symbol, add_mapping_symbol): New functions. * config/tc-nds32.h (enum mstate): New. (nds32_segment_info_type): Likewise. * configure.ac (--enable-dsp-ext, --enable-zol-ext): New options. * config.in: Regenerated. * configure: Regenerated. * config/tc-nds32.c (nds32_dx_regs): Set the value according to the configuration. (nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext): Likewise. (nds32_dsp_ext): New variable. Set the value according to the configuration. (nds32_zol_ext): Likewise. (asm_desc, nds32_pseudo_opcode_table): Make them static. (nds32_set_elf_flags_by_insn): Updated. (nds32_check_insn_available): Updated. (nds32_str_tolower): New function. * config/tc-nds32.c (relax_table): Updated. (md_begin): Updated. (md_assemble): Use XNEW macro to allocate space for `insn.info', and then remember to free it. (md_section_align): Cast (-1) to ValueT. (nds32_get_align): Cast (~0U) to addressT. (nds32_relax_branch_instructions): Updated. (md_convert_frag): Add new local variable `final_r_type'. (invalid_prev_frag): Add new bfd_boolean parameter `relax'. All callers changed. * config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field. (struct nds32_hint_map): Add `option_list' field. (struct suffix_name, suffix_table): Remove the unused `pic' field. (do_pseudo_b, do_pseudo_bal): Remove the suffix checking. (do_pseudo_la_internal, do_pseudo_pushpopm): Indent. (relax_hint_bias, relax_hint_id_current): New static variables. (reset_bias, relax_hint_begin): New variables. (nds_itoa): New function. (CLEAN_REG, GET_OPCODE): New macros. (struct relax_hint_id): New. (nds32_relax_hint): For .relax_hint directive, we can use `begin' and `end' to mark the relax pattern without giving exactly id number. (nds32_elf_append_relax_relocs): Handle the case that the .relax_hint directives are attached to pseudo instruction. (nds32_elf_save_pseudo_pattern): Change the second parameter from instruction's opcode to byte code. (nds32_elf_build_relax_relation): Add new bfd_boolean parameter `pseudo_hint'. (nds32_lookup_pseudo_opcode): Fix the overflow issue. (enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT. (nds32_elf_record_fixup_exp, relax_ls_table, hint_map, nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name): Updated. * config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6. (enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and NDS32_RELAX_HINT_LA_GOTOFF. * config/tc-nds32.h (relax_ls_table): Add floating load/store to gp relax pattern. (hint_map, nds32_find_reloc_table): Likewise. * configure.ac: Define NDS32_LINUX_TOOLCHAIN. * configure: Regenerated. * config.in: Regenerated. * config/tc-nds32.h (enum nds32_ramp): Updated. (enum nds32_relax_hint_type): Likewise. * config/tc-nds32.c: Include "errno.h" and "limits.h". (relax_ls_table): Add TLS relax patterns. (nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on each instructions of TLS patterns. (nds32_elf_record_fixup_exp): Updated. (nds32_apply_fix): Likewise. (suffix_table): Add TLSDESC suffix. binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number from 215 to 255 for NDS32. bfd * elf32-nds32.c (nds32_elf_relax_loadstore): Remove the unused target features. (bfd_elf32_nds32_set_target_option): Remove the unused parameters. (nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12, nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls, nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff nds32_elf_relax_gotoff_suff, calculate_plt_memory_address, calculate_plt_offset, calculate_got_memory_address, nds32_elf_check_dup_relocs): Removed. All callers changed. * elf32-nds32.h: Remove the unused macros and defines. (elf_nds32_link_hash_table): Remove the unused variable. (bfd_elf32_nds32_set_target_option): Update prototype. (nds32_elf_ex9_init): Removed. * elf32-nds32.c (nds32_convert_32_to_16): Updated. * elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros to initialize array nds32_elf_howto_table in any order without lots of EMPTY_HOWTO. (nds32_reloc_map): Updated. * reloc.c: Add BFD_RELOC_NDS32_LSI. * bfd-in2.h: Regenerated. * bfd/libbfd.h: Regenerated. * elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI. (nds32_reloc_map): Likewise. (nds32_elf_relax_flsi): New function. (nds32_elf_relax_section): Support floating load/store relaxation. * elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset): New macro. (struct elf_nds32_link_hash_entry): New `offset_to_gp' field. (struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields. (elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard, nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym): New functions. (nds32_info_to_howto_rel): Add BFD_ASSERT. (bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc, nds32_elf_link_hash_table_create, nds32_elf_relocate_section, nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label, bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated. (nds32_elf_final_sda_base): Improve it to find the better gp value. (insert_nds32_elf_blank): Must consider `len' when inserting blanks. * elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype. (struct elf_nds32_link_hash_table): Add new variable `hyper_relax'. * elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function. (create_got_section): Likewise. (allocate_dynrelocs, nds32_elf_size_dynamic_sections, nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated. (nds32_elf_check_relocs): Fix the issue that the shared library may has TEXTREL entry in the dynamic section. (nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs since the TEXTREL issue is fixed in the nds32_elf_check_relocs. (nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ dynamic entry. (calculate_offset): Remove the unused parameter `pic_ext_target' and related codes. All callers changed. (elf_backend_dtrel_excludes_plt): Disable it temporarily since it will cause some errors for our test cases. * elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the generic object. * reloc.c: Add TLS relocations. * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * elf32-nds32.h (struct section_id_list_t): New. (elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New prototypes. (elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent): New macro. (nds32_insertion_sort, bfd_elf32_nds32_set_target_option, elf_nds32_link_hash_table): Updated. * elf32-nds32.c (enum elf_nds32_tls_type): New. (struct elf32_nds32_relax_group_t, struct relax_group_list_t): New. (elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type, fls, ones32, list_insert, list_insert_sibling, dump_chain, elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions. (elf_nds32_obj_tdata): Add new fields. (elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros. (nds32_elf_howto_table): Add TLS relocations. (nds32_reloc_map): Likewise. (nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections, nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info, nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option, nds32_elf_check_relocs, allocate_dynrelocs): Updated. (nds32_elf_relax_section): Call nds32_elf_unify_tls_model. (dtpoff_base): Rename it to `gottpof' and then update it. opcodes * nds32-asm.c (operand_fields): Remove the unused fields. (nds32_opcodes): Remove the unused instructions. * nds32-dis.c (nds32_ex9_info): Removed. (nds32_parse_opcode): Updated. (print_insn_nds32): Likewise. * nds32-asm.c (config.h, stdlib.h, string.h): New includes. (LEX_SET_FIELD, LEX_GET_FIELD): Update defines. (nds32_asm_init, build_operand_hash_table, build_keyword_hash_table, build_opcode_hash_table): New functions. (nds32_keyword_table, nds32_keyword_count_table, nds32_field_table, nds32_opcode_table): New. (hw_ktabs): Declare it to a pointer rather than an array. (build_hash_table): Removed. * nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT, SYN_ROPT and upadte HW_GPR and HW_INT. * nds32-dis.c (keywords): Remove const. (match_field): New function. (nds32_parse_opcode): Updated. * disassemble.c (disassemble_init_for_target): Add disassemble_init_nds32. * nds32-dis.c (eum map_type): New. (nds32_private_data): Likewise. (get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid, nds32_add_opcode_hash_table, disassemble_init_nds32): New functions. (print_insn_nds32): Updated. * nds32-asm.c (parse_aext_reg): Add new parameter. (parse_re, parse_re2, parse_aext_reg): Only reduced registers are allowed to use. All callers changed. * nds32-asm.c (keyword_usr, keyword_sr): Updated. (operand_fields): Add new fields. (nds32_opcodes): Add new instructions. (keyword_aridxi_mx): New keyword. * nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX and NASM_ATTR_ZOL. (ALU2_1, ALU2_2, ALU2_3): New macros. * nds32-dis.c (nds32_filter_unknown_insn): Updated.	8 years ago
Rainer Orth	3d282ac370	Handle missing Solaris auxv entries Currently, three tests FAIL on Solaris 11.4+ (amd64-pc-solaris2.11 and sparcv9-sun-solaris2.11): info auxv [...] 2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7 2023 ??? 0x0 0 AT_NULL End of vector 0x0 (gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0 FAIL: gdb.base/auxv.exp: info auxv on live process info auxv 4294969310 ??? 0x7fffbfffe410 9225589753816 ??? 0x7fffbfffe45c [...] WARNING: Unrecognized tag value: 4294969310 ??? 0x7fffbfffe410 WARNING: Unrecognized tag value: 9225589753816 ??? 0x7fffbfffe45c WARNING: Unrecognized tag value: 140733193388037 ??? 0x6 [...] 2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7 2023 ??? 0x0 0 AT_NULL End of vector 0x0 (gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0 UNRESOLVED: gdb.base/auxv.exp: info auxv on native core dump info auxv [...] 2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7 2023 ??? 0x0 0 AT_NULL End of vector 0x0 (gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0 FAIL: gdb.base/auxv.exp: info auxv on gcore-created dump The following patch fixes this by introducing the missing AT_SUN_* values from Solaris 11.4+ <sys/auxv.h>. This lets the live and gcore-created dump tests PASS. I don't know yet what's the reason for those weird 'Unrecognized tag value' warnings with native core dumps is; elfdump -n certainly doesn't show them. However, native core dumps still need quite some work (mostly in bfd) in this and other areas. Tested on amd64-pc-solaris2.11. gdb: * auxv.c (default_print_auxv_entry): Reflect AT_SUN_CAP_HW1 renaming. Handle AT_SUN_EMULATOR, AT_SUN_BRANDNAME, AT_SUN_BRAND_AUX1, AT_SUN_BRAND_AUX2, AT_SUN_BRAND_AUX3, AT_SUN_CAP_HW2. include: * elf/common.h (AT_SUN_HWCAP): Rename to ... (AT_SUN_CAP_HW1): ... this. Retain old name for backward compatibility. (AT_SUN_EMULATOR, AT_SUN_BRANDNAME, AT_SUN_BRAND_AUX1) (AT_SUN_BRAND_AUX2, AT_SUN_BRAND_AUX3, AT_SUN_CAP_HW2): Define.	8 years ago
Simon Marchi	af39b1c216	Disable -Wformat-nonliteral in parts of printcmd.c commit `3322c5d9a1` ("Remove unneeded explicit .o targets") broke the build with clang, because -Wno-format-nonliteral was in fact needed. This patch fixes the problem by introducing DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL and using it in printcmd.c. This seems preferable to reverting the patch because now the warning suppression is more targeted. gdb/ChangeLog 2018-09-05 Simon Marchi <simon.marchi@ericsson.com> * printcmd.c (printf_c_string): Use DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL. (printf_wide_c_string, printf_pointer, ui_printf): Likewise. include/ChangeLog 2018-09-05 Simon Marchi <simon.marchi@ericsson.com> * diagnostics.h (DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL): New macro.	8 years ago
Alan Modra	4a9699735b	PowerPC64 higher REL16 relocations There are occasions where someone might want to build a 64-bit pc-relative offset from 16-bit pieces. This adds the necessary REL16 relocs corresponding to existing ADDR16 relocs that can be used to build 64-bit absolute values. include/ * elf/ppc64.h (R_PPC64_REL16_HIGH, R_PPC64_REL16_HIGHA), (R_PPC64_REL16_HIGHER, R_PPC64_REL16_HIGHERA), (R_PPC64_REL16_HIGHEST, R_PPC64_REL16_HIGHESTA): Define. (R_PPC64_LO_DS_OPT, R_PPC64_16DX_HA): Bump value. bfd/ * reloc.c (BFD_RELOC_PPC64_REL16_HIGH, BFD_RELOC_PPC64_REL16_HIGHA), (BFD_RELOC_PPC64_REL16_HIGHER, BFD_RELOC_PPC64_REL16_HIGHERA), (BFD_RELOC_PPC64_REL16_HIGHEST, BFD_RELOC_PPC64_REL16_HIGHESTA): Define. * elf64-ppc.c (ppc64_elf_howto_raw): Add new REL16 howtos. (ppc64_elf_reloc_type_lookup): Translate new REL16 relocs. (ppc64_elf_check_relocs, ppc64_elf_relocate_section): Handle them. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): Allow ADDR16 HIGH, HIGHA, HIGHER, HIGHERA, HIGHEST, and HIGHESTA relocs. Group 16-bit relocs. * config/tc-ppc.c (md_apply_fix): Translate those ADDR16 relocs to REL16 when pcrel. Sort relocs.	8 years ago
Jim Wilson	43135d3b15	RISC-V: Allow instruction require more than one extension 2018-08-29 Kito Cheng <kito@andestech.com> gas/ * config/tc-riscv.c (riscv_subset_supports): New argument: xlen_required. (riscv_multi_subset_supports): New function, able to check more than one extension. (riscv_ip): Use riscv_multi_subset_supports instead of riscv_subset_supports. (riscv_set_arch): Update call-site for riscv_subset_supports. (riscv_after_parse_args): Likewise. include/ opcode/riscv.h (MAX_SUBSET_NUM): New. (riscv_opcode): Add xlen_requirement field and change type of subset. opcodes/ riscv-dis.c (riscv_disassemble_insn): Check XLEN by riscv_opcode.xlen_requirement. * riscv-opc.c (riscv_opcodes): Update for struct change.	8 years ago
Chenghua Xu	9108bc33b1	[MIPS] Add Loongson 2K1000 proccessor support. bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs264e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS264E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs264e to bfd_mach_mips_gs464e extension. binutils/ * NEWS: Mention Loongson 2K1000 proccessor support. * readelf.c (get_machine_flags): Handle gs264e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS264E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS264E. (mips_cpu_info_table): Add gs264e descriptors. * doc/as.texi (march table): Add gs264e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS264E. * opcode/mips.h (CPU_XXX): New CPU_GS264E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs264e and gs464e. opcodes/ * mips-dis.c (mips_arch_choices): Add gs264e descriptors.	8 years ago
Chenghua Xu	bd782c07b9	[MIPS] Add Loongson 3A2000/3A3000 proccessor support. bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs464e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS464E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs464e to bfd_mach_mips_gs464 extension. binutils/ * NEWS: Mention Loongson 3A2000/3A3000 proccessor support. * readelf.c (get_machine_flags): Handle gs464e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS464E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS464E. (mips_cpu_info_table): Add gs464e descriptors. * doc/as.texi (march table): Add gs464e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS464E. * opcode/mips.h (CPU_XXX): New CPU_GS464E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs464e and gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464e descriptors.	8 years ago

1 2 3 4 5 ...

1080 Commits (d5c04e1bf81c06ab5c30e69eb41b5cea9136a109)