genericXor, genericBtst): Use `unsigned32'.
* op_utils.c: Likewise.
* mn10300.igen, am33.igen: Use `unsigned32', `signed32',
`unsigned64' or `signed64' where type width is relevant.
* gdb.base/break.exp (bp on small function, optimized file):
Add a second pass pattern. The behavior differs here between stabs
and dwarf for one-line functions. Stabs preserves two line symbols
(one before the prologue and one after) with the same line number,
but dwarf regards these as duplicates and discards one of them.
Therefore the address after the prologue (where the breakpoint is)
has no exactly matching line symbol, and GDB reports the breakpoint
as if it were in the middle of a line rather than at the beginning.
* approved by nickc
[opcodes/ChangeLog]
2000-05-16 Frank Ch. Eigler <fche@redhat.com>
* fr30-desc.h: Partially regenerated to account for changed
CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
* m32r-desc.h: Ditto.
[include/opcode/ChangeLog]
2000-05-16 Frank Ch. Eigler <fche@redhat.com>
* cgen.h (CGEN_MAX_SYNTAX_BYTES): Increase to 32. Check that
it exceeds CGEN_ACTUAL_MAX_SYNTAX_BYTES, if set.
(CGEN_MAX_IFMT_OPERANDS): Increase to 16. Check that it exceeds
CGEN_ACTUAL_MAX_IFMT_OPERANDS, if set.
sim:
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
gdb:
* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
bfd_mach_sh3_dsp.
(sh_show_regs): Floating point registers are called fr0-fr15.
For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
Handle sh-dsp and sh3-dsp.
config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
don't have floating point registers.
(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
Jimmy Guo
H.J. Lu
Jeff Law
J.T. Conklin
Alexandre Oliva
Nick Clifton
David Edelsohn
Andrew Cagney
Michael Snyder
Alan Modra
Eli Zaretskii
Frank Ch. Eigler
Catherine Moore
Joern Rennecke