binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Mike Frysinger	ce3ec98acd	sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.	5 years ago
Mike Frysinger	bc56166f66	sim: unify toolchain dependency logic The common dir is already probing this info since it's using automake, so pass it down to the subdirs so they don't have to probe it at all.	5 years ago
Mike Frysinger	d3562f83a7	sim: unify toolchain probing logic Move these options up to the common dir so we only test & export them once across all ports.	5 years ago
Mike Frysinger	b5689863bd	sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.	5 years ago
Mike Frysinger	07490bf81d	sim: unify various library testing logic Move these options up to the common dir so we only test & export them once across all ports.	5 years ago
Mike Frysinger	47ce766a8b	sim: unify -Werror build settings Move these options up to the common dir so we only test & export them once across all ports. It also enables -Werror usage on the common files we've been pulling out of arch subdirs.	5 years ago
Mike Frysinger	982c3a65ca	sim: move -Werror disabling to Makefile For the ports that still don't build with -Werror, rather than disable the flag at configure time, do it at make time. This will allow us to unify these tests in the common sim configure script.	5 years ago
Mike Frysinger	1fef66b0dc	sim: split sim-signal.h include out The sim-basics.h is too big and includes too many things. This leads to some arch's sim-main.h having circular loop issues with defs, and makes it hard to separate out common objects from arch-specific defs. By splitting up sim-basics.h and killing off sim-main.h, it'll make it easier to separate out the two.	5 years ago
Mike Frysinger	f9a4d54332	sim: overhaul & unify endian settings management The m4 macro has 2 args: the "wire" settings (which represents the hardwired port behavior), and the default settings (which are used if nothing else is specified). If none are specified, the arch is expected to support both, and the value will be probed based on the user runtime options or the input program. Only two arches today set the default value (bpf & mips). We can probably let this go as it only shows up in one scenario: the sim is invoked, but with no inputs, and no user endian selection. This means bpf will not behave like the other arches: an error is shown and forces the user to make a choice. If an input program is used though, we'll still switch the default to that. This allows us to remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting. For the ports that set a "wire" endian, move it to the runtime init of the respective sim_open calls. This allows us to change the WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting if they want to force a specific endianness. With all the endian logic moved to runtime selection, we can move the configure call up to the common dir so we only process it once across all ports. The ppc arch was picking the wire endian based on the target used, but since we weren't doing that for other biendian arches, we can let this go too. We'll rely on the input selecting the endian, or make the user decide.	5 years ago
Mike Frysinger	a8a3d90792	sim: drop obsolete AC_EXEEXT call The current autoconf 2.69 defines this to nothing because the logic in AC_PROG_CC takes care of it all the time now. Delete the call.	5 years ago
Mike Frysinger	52d37d2c91	sim: drop arch-specific config.h All of the settings in here are handled by the common top-level config.h, so drop the individual arch-config.h files entirely. This will also help guarantee that we don't add any new arch specific defines that would affect common code which will help with the effort of unifying them.	5 years ago
Mike Frysinger	bcaa61f7c8	sim: move dv-sockser define to CPPFLAGS This is the only define left in m4/ that is not in the common config.h, so move it to sim_hw_cflags so we can drop the arch-specific config.h.	5 years ago
Mike Frysinger	ba307cddcf	sim: overhaul alignment settings management Currently, the sim-config module will abort if alignment settings haven't been specified by the port's configure.ac. This is a bit weird when we've allowed SIM_AC_OPTION_ALIGNMENT to seem like it's optional to use. Thus everyone invokes it. There are 4 alignment settings, but really only 2 matters: strict and nonstrict. The "mixed" setting is just the default ("unset"), and "forced" isn't used directly by anyone (it's available as a runtime option for some ports). The m4 macro has 2 args: the "wire" settings (which represents the hardwired port behavior), and the default settings (which are used if nothing else is specified). If none are specified, then the build won't work (see above as if SIM_AC_OPTION_ALIGNMENT wasn't called). If default settings are provided, then that is used, but we allow the user to override at runtime. Otherwise, the "wire" settings are used and user runtime options to change are ignored. Most ports specify a default, or set the "wire" to nonstrict. A few set "wire" to strict, but it's not clear that's necessary as it doesn't make the code behavior, by default, any different. It might make things a little faster, but we should provide the user the choice of the compromises to make: force a specific mode at compile time for faster runtime, or allow the choice at runtime. More likely it seems like an oversight when these ports were initially created, and/or copied & pasted from existing ports. With all that backstory, let's get to what this commit does. First kill off the idea of a compile-time default alignment and set it to nonstrict in the common code. For any ports that want strict alignment by default, that code is moved to sim_open while initializing the sim. That means WITH_DEFAULT_ALIGNMENT can be completely removed. Moving the default alignment to the runtime also allows removal of setting the "wire" settings at configure time. Which allows removing of all arguments to SIM_AC_OPTION_ALIGNMENT and moving that call to common code. The macro logic can be reworked to not pass WITH_ALIGNMENT as -D CPPFLAG and instead move it to config.h. All of these taken together mean we can hoist the macro up to the top level and share it among all sims so behavior is consistent among all the ports.	5 years ago
Mike Frysinger	6dd65fc048	sim: unify bug & package settings Move these options up to the common dir so we only test & export them once across all ports. The AC_INIT macro does a lot of the heavy lifting already which allows further simplification.	5 years ago
Mike Frysinger	04381273a9	sim: unify debug/stdio/trace/profile build settings Move these options up to the common dir so we only test & export them once across all ports. The ppc code needs a little extra care with its trace settings as it's not exactly the same API as the common code. The other knobs are the same though.	5 years ago
Mike Frysinger	5ea4547402	sim: unify environment build settings Move the --sim-enable-environment option up to the common dir so we only test & export it once across all ports.	5 years ago
Mike Frysinger	dba333c1e4	sim: unify assert build settings Move the --sim-enable-assert option up to the common dir so we only test & export it once across all ports.	5 years ago
Mike Frysinger	b15c5d7a51	sim: unify platform function & header tests Move the various platform tests up a level to avoid duplication across the ports. When building multiple versions, this speeds things up a bit. For now we move the obvious stuff up a level, but we don't turn own the config.h entirely just yet -- we still have some tests related to libraries that need consideration.	5 years ago
Mike Frysinger	906192d785	sim: cgen: inline cgen_init logic This function has done only one thing: post-process command line settings to see if profiling or tracing has been enabled, and if so, set the run_fast_p flag in the simulator state. That flag is only used in one place: to select the fast or slow cgen engine. By inlining the run_fast_p logic to the one place it's used, we can delete a good amount of logic specific to cgen ports: both the call to cgen_init and the conditional simulator state. This in turn allows us to have a single simulator state struct across all ports so we can share objects more between them, and makes the sim_open calls look more consistent.	5 years ago
Mike Frysinger	e106fc358c	sim: cgen: invert sim_state storage for cgen ports	10 years ago
Mike Frysinger	6df01ab8ab	sim: switch config.h usage to defs.h The defs.h header will take care of including the various config.h headers. For now, it's just config.h, but we'll add more when we integrate gnulib in. This header should be used instead of config.h, and should be the first include in every .c file. We won't rely on the old behavior where we expected files to include the port's sim-main.h which then includes the common sim-basics.h which then includes config.h. We have a ton of code that includes things before sim-main.h, and it sometimes needs to be that way. Creating a dedicated header avoids the ordering mess and implicit inclusion that shows up otherwise.	5 years ago
Mike Frysinger	79633c125e	sim: riscv: move __int128 check to configure	5 years ago
Tom Tromey	be7547b077	Add missing stdlib.h includes to sim This updates the various "mloop.in" files to emit an include of stdlib.h, to avoid warnings about 'abort' being undeclared. One such warning now remains, in mn10300.igen. I don't know offhand the best way to fix this one. 2021-05-04 Tom Tromey <tromey@adacore.com> * mloop.in: Include <stdlib.h>. sim/iq2000/ChangeLog 2021-05-04 Tom Tromey <tromey@adacore.com> * mloop.in: Include <stdlib.h>. sim/lm32/ChangeLog 2021-05-04 Tom Tromey <tromey@adacore.com> * mloop.in: Include <stdlib.h>. sim/m32r/ChangeLog 2021-05-04 Tom Tromey <tromey@adacore.com> * mloop.in: Include <stdlib.h>. sim/or1k/ChangeLog 2021-05-04 Tom Tromey <tromey@adacore.com> * mloop.in: Include <stdlib.h>.	5 years ago
Mike Frysinger	aa0fca163e	sim: add support for build-time ar & ranlib This is needed when building for a target whose ar & ranlib are incompatible with the current build system. For example, building for Windows on a Linux system. Then manually import the automake rule for libigen.a, but tweak the tool variables to use the FOR_BUILD variants.	5 years ago
Mike Frysinger	fe34861780	sim: nrun: add local strsignal prototype While libiberty provides a definition for this for systems that lack the function (e.g. Windows), it doesn't provide a prototype. So add our own local copy in the one file that uses the func.	5 years ago
Mike Frysinger	bd0918c910	sim: nltvals: unify common syscall tables Since libgloss provides a default syscall table for arches, use that to provide the default syscall table for ports. Only the exceptions need to be enumerated now with the common logic as the default.	5 years ago
Mike Frysinger	66d055c754	sim: enable hardware support by default Force this on for all ports. We have a few common models that can be used, so make them generally available. If the port doesn't use any hardware (the default), then behavior is unchanged.	5 years ago
Mike Frysinger	9d90335212	sim: simplify hardware m4 macro Every port using this sets the 1st arg to yes and the 2nd arg to "". These are the defaults we probably want anyways in order to unify the codebase, so move them to the macro and only allow ports to declare extra hardware models.	5 years ago
Tom Tromey	19f6a43c6c	Do not check for sys/time.h or sys/times.h This updates the sim so that it unconditionally uses sys/time.h. This is in agreement with existing code, and a recent change to BFD. I also think that sys/times.h is never needed by the sim, so this patch removes the check and the one spot that was conditionally including it. sim/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for sys/time.h or sys/times.h. sim/aarch64/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/avr/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/bfin/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/bpf/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * sim-utils.c: Update includes. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * simops.c: Update includes. * configure, config.in: Rebuild. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * rvdummy.c: Update includes. * dv-rv.c: Update includes. * configure, config.in: Rebuild. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/erc32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/example-synacor/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/ft32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/h8300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m32c/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mcore/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/microblaze/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/moxie/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/msp430/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/ppc/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * mon.c: Update includes. * emul_unix.c: Update includes. (do_unix_gettimeofday): Update condition. sim/pru/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/riscv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * interp.c: Update includes. * configure, config.in: Rebuild. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild.	5 years ago
Tom Tromey	e7d8f1da71	Remove and modernize dependencies in sim Some spots in the sim build used manual dependencies, and some spots did a compilation by hand but did not use the automatic dependency tracking code. This patch fixes these spots. I didn't touch ppc, because it doesn't use the common Makefile code. I also didn't touch objects that are for the build machine, because automatic dependencies don't work for those. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (armemu26.o, armemu32.o): Use COMPILE and POSTCOMPILE. sim/bpf/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, cpu.o, sim-if.o, traps.o): Remove. (mloop-le.o, mloop-be.o, decode-le.o, decode-be.o, sim-le.o) (sim-be.o): Use COMPILE and POSTCOMPILE. (SIM_EXTRA_DEPS): Add eng-le.h, eng-be.h. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (simops.o): Remove. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o, dv-cris.o, dv-rv.o, arch.o, traps.o) (devices.o, crisv10f.o, mloopv10f.o, cpuv10.o, decodev10.o) (modelv10.o, crisv32f.o, mloopv32f.o, cpuv32.o, decodev32.o) (modelv32.o): Remove. (SIM_EXTRA_DEPS): Add engv10.h. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (simops.o): Remove. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, devices.o, frv.o, traps.o, pipeline.o) (interrupts.o, memory.o, cache.o, options.o, reset.o) (registers.o, profile.o, profile-fr400.o, profile-fr450.o) (profile-fr500.o, profile-fr550.o, sim-if.o, mloop.o, cpu.o) (decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o): Remove. (arch.o): Use COMPILE and POSTCOMPILE. (devices.o, iq2000.o, mloop.o, cpu.o, decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, traps.o, sim-if.o, lm32.o, mloop.o) (cpu.o, decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o, arch.o, traps.o, traps-linux.o) (devices.o, m32r.o, mloop.o, cpu.o, decode.o, sem.o, model.o) (m32rx.o, mloopx.o, cpux.o, decodex.o, semx.o, modelx.o) (m32r2.o, mloop2.o, cpu2.o, decode2.o, sem2.o, model2.o): Remove. (SIM_EXTRA_DEPS): Add eng.h, engx.h, eng2.h. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o): Remove. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o, m16run.o, micromipsrun.o, multi-run.o): Remove. (SIM_EXTRA_DEPS): New variable. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o): Remove. (idecode.o op_utils.o semantics.o): Remove. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (mloop.o, arch.o, cpu.o, decode.o, sem.o) (sem-switch.o, model.o): Remove. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o) (reg.o, rl78.o): Remove. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o) (misc.o, reg.o, rx.o, syscalls.o, trace.o): Remove. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (interp.o): Remove. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o, simops.o, semantics.o): Remove.	5 years ago
Tom Tromey	efd82ac7cb	Require GNU make GDB has required GNU make for quite some time, and this patch applies this approach to the sim as well. Requiring GNU make means that automatic dependency tracking can be simple and reliable, and it also makes other refactorings simpler. sim/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for make. sim/aarch64/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/avr/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/bfin/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Make-common.in: Require GNU make. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/erc32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/example-synacor/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/ft32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/h8300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m32c/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mcore/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/microblaze/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/moxie/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/msp430/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/pru/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/riscv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild.	5 years ago
Mike Frysinger	2662c237a9	sim: regen against sim/m4/ My scripts weren't updated to use new -I../m4 as the first arg.	5 years ago
Simon Marchi	1f195bc327	sim: use -Werror when probing for supported warning flags When building with clang, we get: error: unknown warning option '-Wmissing-parameter-type' [-Werror,-Wunknown-warning-option] This is because clang only warns by default when encountering an unknown warning option, and the probe for supported warning flags is done without -Werror. All flags are therefore accepted by configure, but then it breaks when actually compiling a source file with -Werror. This is equivalent to this commit in gdb: `3e019bdc20` gdb: Use -Werror when checking for (un)supported warning flags We then see some other compilation errors when building with clang and -Werror, they can be dealt with later.	5 years ago
Mike Frysinger	2c2645d7a8	sim: switch to AC_CHECK_HEADERS_ONCE This avoids duplicate tests for headers between common m4, arches, and any other sources that would trigger header tests.	5 years ago
Mike Frysinger	2390d77943	sim: iq2000: switch syscalls to common nltvals Rather than hand duplicate the syscall table, switch to the common nltvals framework. We have to tweak the constant names, but we get everything else for free. I made sure the constants have the same values before & after too :).	5 years ago
Mike Frysinger	37e9f18266	sim: switch to AC_CHECK_FUNCS_ONCE & merge a little This avoids duplicate tests for functions between common m4, arches, and any other sources that would trigger func tests. Also manually delete known duplicate function tests between the m4, bfin, and v850 ports.	5 years ago
Mike Frysinger	d5a71b1131	sim: cgen: move cgen_cpu_max_extra_bytes logic into the common code Every arch handles this the same way, so move it to the common code. This will also make unifying the sim_cpu structure easier.	10 years ago
Tom Tromey	32a046ab0d	Add system includes in sim This updates various parts of the sim to include missing system headers. I made the includes unconditional, because other parts of the tree are already doing this. 2021-04-08 Tom Tromey <tom@tromey.com> * traps.c: Include stdlib.h. * cris-tmpl.c: Include stdlib.h. sim/erc32/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * func.c: Include sys/time.h. sim/frv/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * traps.c: Include stdlib.h. * registers.c: Include stdlib.h. * profile.c: Include stdlib.h. * memory.c: Include stdlib.h. * interrupts.c: Include stdlib.h. * frv.c: Include stdlib.h. * cache.c: Include stdlib.h. sim/iq2000/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * iq2000.c: Include stdlib.h. sim/m32r/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * traps.c: Include stdlib.h. * m32r.c: Include stdlib.h. sim/ppc/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * emul_unix.c: Include time.h.	5 years ago
Tom Tromey	81e6e8ae40	Do not use old-style definitions in sim This changes all the non-generated (hand-written) code in sim to use "new" (post-K&R) style function definitions. 2021-04-08 Tom Tromey <tom@tromey.com> * bpf.c (bpf_def_model_init): Use new-style declaration. sim/common/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * cgen-utils.c (RORQI, ROLQI, RORHI, ROLHI, RORSI, ROLSI): Use new-style declaration. sim/erc32/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sis.c (run_sim, main): Use new-style declaration. * interf.c (run_sim, sim_open, sim_close, sim_load) (sim_create_inferior, sim_store_register, sim_fetch_register) (sim_info, sim_stop_reason, flush_windows, sim_do_command): Use new-style declaration. * help.c (usage, gen_help): Use new-style declaration. * func.c (batch, set_regi, set_rega, disp_reg, limcalc) (reset_stat, show_stat, init_bpt, int_handler, init_signals) (disp_fpu, disp_regs, disp_ctrl, disp_mem, dis_mem, event) (init_event, set_int, advance_time, now, wait_for_irq, check_bpt) (reset_all, sys_reset, sys_halt): Use new-style declaration. * float.c (get_accex, clear_accex, set_fsr): Use new-style declaration. * exec.c (sub_cc, add_cc, log_cc, dispatch_instruction, fpexec) (chk_asi, execute_trap, check_interrupts, init_regs): Use new-style declaration. * erc32.c (init_sim, reset, decode_ersr, mecparerror) (error_mode, decode_memcfg, decode_wcr, decode_mcr, sim_halt) (close_port, exit_sim, mec_reset, mec_intack, chk_irq, mec_irq) (set_sfsr, mec_read, mec_write, init_stdio, restore_stdio) (port_init, read_uart, write_uart, flush_uart, uarta_tx) (uartb_tx, uart_rx, uart_intr, uart_irq_start, wdog_intr) (wdog_start, rtc_intr, rtc_start, rtc_counter_read) (rtc_scaler_set, rtc_reload_set, gpt_intr, gpt_start) (gpt_counter_read, gpt_scaler_set, gpt_reload_set, timer_ctrl) (memory_read, memory_write, get_mem_ptr, sis_memory_write) (sis_memory_read): Use new-style declaration. sim/frv/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, frv_sim_close, sim_create_inferior): Use new-style declaration. sim/h8300/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * compile.c (cmdline_location): Use new-style declaration. sim/iq2000/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration. * iq2000.c (fetch_str): Use new-style declaration. sim/lm32/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration. sim/m32r/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration.	5 years ago
Mike Frysinger	c2783492b6	sim: unify toolchain settings The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.	5 years ago
Mike Frysinger	c25ea03dd6	sim: set up build-time compiler settings Some sim dirs were already setting up CFLAGS_FOR_BUILD in inconsistent ways. Move it to a common place for reuse.	5 years ago
Mike Frysinger	a3e2cc64a6	sim: use AC_CHECK_TOOL to find ar Rather than require $AR be set and then default to `ar`, use the standard AC_CHECK_TOOL helper to find a good prefixed tool. In practice this shouldn't change much as we seem to have macros in the tree that were already setting it up, but we shouldn't rely on that implicitly.	5 years ago
Mike Frysinger	ebe9564b99	sim: require AC_PROG_CPP explicitly All the scripts were using this implicitly already, so there's no real change for them, but we want to call it explicitly as the CPP tool is used to generate nltvals.def.	5 years ago
Mike Frysinger	760b3e8bc9	sim: common: split up acinclude.m4 into individual m4 files This file is quite large and is getting unmanageable. Split it apart to follow aclocal best practices by putting one-macro-per-file. There shouldn't be any real functional changes here as can be seen in the configure script regens.	5 years ago
Mike Frysinger	136da8cd9c	sim: switch to AC_CONFIG_MACRO_DIRS Rather than hand maintain m4 includes in various autotool files, use AC_CONFIG_MACRO_DIRS to declare the relevant search paths. This simplifies the code, makes it more robust, and cleans out unused logic from configure.	5 years ago
Mike Frysinger	4c0d76b9c4	sim: watchpoints: use common sim_pc_get Few arches implement STATE_WATCHPOINTS()->pc while all of them implement sim_pc_get. Lets switch the sim-watch core for monitoring pc events to the sim_pc_get API so this module works for all ports, and then we can delete this old back channel of snooping in the port's cpu state -- the code needs the pointer to the pc storage so that it can read out bytes and compare them to the watchrange. This also fixes the logic on multi-cpu sims by removing the limitation of only being able to watch CPU0's state.	11 years ago
Mike Frysinger	7a36eeea26	sim: common: switch AC_CONFIG_HEADERS The AC_CONFIG_HEADER macro is long deprecated, so switch to the newer form. This also gets rid of the position limitation, and drops support for an argument to SIM_AC_COMMON which we haven't used anywhere.	5 years ago
Mike Frysinger	aa09469fc6	sim: drop use of bfd/configure.host These settings might have made sense in darker compiler times, but I think they're largely obsolete now. Looking through the values that get used in HDEFINES, it's quite limited, and configure itself should handle them. If we still need something, we can leverage standard autoconf macros instead, after we get a clear user report. TDEFINES was never set anywhere and was always empty, so prune that.	5 years ago
Mike Frysinger	d4e3adda12	sim: watchpoints: change sizeof_pc to sizeof(sim_cia) Existing ports already have sizeof_pc set to the same size as sim_cia, so simply make that part of the core code. We already assume this in places by way of sim_pc_{get,set}, and this is how it's documented in the sim-base.h API. There is code to allow sims to pick different register word sizes from address sizes, but most ports use the defaults for both (32-bits), and the few that support multiple register sizes never change the address size (so address defaults to register). I can't think of any machine where the register hardware size would be larger than the address word size either. We have ABIs that behave that way (e.g. x32), but the hardware is still equivalent register sized.	11 years ago
Mike Frysinger	5c1008a41f	sim: call SIM_AC_OPTION_WARNINGS(no) in remaining ports We want all ports to opt into extra warnings as the default compiler settings lets a lot slide. Opt all the ports that haven't already in to the warning system. None of them build with -Werror, so disable that by default. Hopefully someone finds these important enough to start fixing at some point.	5 years ago

1 2 3 4

166 Commits (ce3ec98acd2f344ae911de3f41dd2e3c6c68b141)