binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Richard W.M. Jones	3f8f9745c7	PR 31283 windmc: Parse input correctly on big endian hosts On big endian hosts (eg. s390x) the windmc tool fails to parse even trivial files: $ cat test.mc ; $ ./binutils/windmc ./test.mc In test.mc at line 1: parser: syntax error. In test.mc at line 1: fatal: syntax error. The tool starts by reading the input as Windows CP1252 and then converting it internally into an array of UTF-16LE, which it then processes as an array of unsigned short (typedef unichar). There are lots of ways this is wrong, but in the specific case of big endian machines the little endian pairs of bytes are byte-swapped. For example, the ';' character in the input above is first converted to UTF16-LE byte sequence { 0x3b, 0x00 }, which is then cast to unsigned short. On a big endian machine the first unichar appears to be 0x3b00. The lexer is unable to recognize this as the comment character ((unichar)';') and so parsing fails. The simple fix is to convert the input to UTF-16BE on big endian machines (and do the reverse conversion when writing the output). Fixes: https://sourceware.org/bugzilla/show_bug.cgi?id=31283 Signed-off-by: Richard W.M. Jones <rjones@redhat.com>	3 years ago
Arsen Arsenovi?	862776f26a	Finalized intl-update patches * intl: Remove directory. Replaced with out-of-tree GNU gettext. * .gitignore: Add '/gettext'. configure.ac (host_libs): Replace intl with gettext. (hbaseargs, bbaseargs, baseargs): Split baseargs into {h,b}baseargs. (skip_barg): New flag. Skips appending current flag to bbaseargs. <library exemptions>: Exempt --with-libintl-{type,prefix} from target and build machine argument passing. * configure: Regenerate. * Makefile.def (host_modules): Replace intl module with gettext module. (configure-ld): Depend on configure-gettext. * Makefile.in: Regenerate. * src-release.sh: Remove references to the intl/ directory.	3 years ago
Aaron Merey	28bc495137	config/debuginfod.m4: Add check for libdebuginfod 0.188 Add check for libdebuginfod 0.188 in AC_DEBUGINFOD and if found define macro HAVE_LIBDEBUGINFOD_FIND_SECTION. This macro indicates support for downloading ELF sections from debuginfod servers.	3 years ago
Brett Werling	d82e33decc	readelf: use fseeko64 or fseeko if possible Changes readelf to make use first of fseeko64 and then fseeko, depending on which of those is available. If neither is available, reverts to the previous behavior of using fseek. This is necessary when building readelf for LLP64 systems, where a long will only be 32 bits wide. If the elf file in question is >= 2 GiB, that is greater than the max long value and therefore fseek will fail indicating that the offset is negative. On such systems, making use of fseeko64 or fseeko will result in the ability so seek past the 2 GiB max long boundary. Note that large archive handling in readelf remains to be fixed.	4 years ago
Nick Clifton	18bf56434d	objdump: Add configure time option to enable colored disassembly output by default. PR 29457 * configure.ac: Add --enable-colored-disassembly. * objdump.c: Add --disassembler-color=terminal. * doc/binutils.texi (objdump): Document the new option. * NEWS: Mention new feature. * config.in: Regenerate in. * configure: Regenerate.	4 years ago
Fangrui Song	2cac01e3ff	binutils, gdb: support zstd compressed debug sections PR29397 PR29563: Add new configure option --with-zstd which defaults to auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support zstd compressed debug sections for most tools. * bfd: for addr2line, objdump --dwarf, gdb, etc * gas: support --compress-debug-sections=zstd * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd * objcopy: support ELFCOMPRESS_ZSTD input for --decompress-debug-sections and --compress-debug-sections=zstd * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd symbols, so gdb has to link against -lzstd in this patch. If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this is too heavyweight, so don't do it for now. ``` % ld/ld-new a.o ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... % ld/ld-new a.o --compress-debug-sections=zstd ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support % binutils/objcopy --compress-debug-sections=zstd a.o b.o binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support % binutils/objcopy b.o --decompress-debug-sections binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... ```	4 years ago
Alan Modra	31e5a3a380	Make dwarf_vma uint64_t This replaces dwarf_vma, dwarf_size_type and dwarf_signed_vma with uint64_t and int64_t everywhere. The patch also gets rid of DWARF_VMA_FMT since we can't use that with uint64_t, and all of the configure support for deciding the flavour of HOST_WIDEST_INT. dwarf_vmatoa also disappears, replacing most uses with one of PRIx64, PRId64 or PRIu64. Printing of size_t and ptrdiff_t values now use %z and %t rather than by casting to unsigned long. Also, most warning messages that used 0x%lx or similar now use %#lx and a few that didn't print the 0x hex prefix now also use %#. The patch doesn't change normal readelf output, except in odd cases where values previously might have been truncated.	4 years ago
Alan Modra	6577f365eb	PR17122, OSX 10.9 build failure sbrk hasn't been used in binutils/ or ld/ for quite some time (so the PR was fixed a while ago). Tidy up configury. PR 17122 binutils/ * configure.ac: Don't check for sbrk. * sysdep.h (sbrk): Don't supply fallback declaration. * config.in: Regenerate. * configure: Regenerate. ld/ * configure.ac: Don't check for sbrk. * config.in: Regenerate. * configure: Regenerate.	4 years ago
Simon Marchi	2952f10cd7	binutils/readelf: build against msgpack, dump NT_AMDGPU_METADATA note contents The AMDGPU HSA OS ABI (code object v3 and above) defines the NT_AMDGPU_METADATA ELF note [1]. The content is a msgpack object describing, among other things, the kernels present in the code object and how to call them. I think it would be useful for readelf to be able to display the content of those notes. msgpack is a structured format, a bit like JSON, except not text-based. It is therefore possible to dump the contents in human-readable form without knowledge of the specific layout of the note. Add configury to binutils to optionally check for the msgpack C library [2]. Add There is a new --with{,out}-msgpack configure flag, and the actual library lookup is done using pkg-config. If msgpack support is enabled, dumping a NT_AMDGPU_METADATA note looks like: $ readelf --notes amdgpu-code-object Displaying notes found in: .note Owner Data size Description AMDGPU 0x0000040d NT_AMDGPU_METADATA (code object metadata) { "amdhsa.kernels": [ { ".args": [ { ".address_space": "global", ".name": "out.coerce", ".offset": 0, ".size": 8, ".value_kind": "global_buffer", }, <snip> If msgpack support is disabled, dump the contents as hex, as is done with notes that are not handled in a special way. This allows one to decode the contents manually (maybe using a command-line msgpack decoder) if really needed. [1] https://llvm.org/docs/AMDGPUUsage.html#code-object-metadata [2] https://github.com/msgpack/msgpack-c/tree/c_master binutils/ChangeLog: * Makefile.am (readelf_CFLAGS): New. (readelf_LDADD): Add MSGPACK_LIBS. * Makefile.in: Re-generate. * config.in: Re-generate. * configure: Re-generate. * configure.ac: Add --with-msgpack flag and check for msgpack using pkg-config. * readelf.c: Include msgpack.h if HAVE_MSGPACK. (print_note_contents_hex): New. (print_indents): New. (dump_msgpack_obj): New. (dump_msgpack): New. (print_amdgpu_note): New. (process_note): Handle NT_AMDGPU_METADATA note contents. Use print_note_contents_hex. Change-Id: Ia60a654e620bc32dfdb1bccd845594e2af328b84	4 years ago
Rainer Orth	b737d3047c	Check for strnlen declaration to fix Solaris 10 build binutils currently fails to compile on Solaris 10: /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c: In function 'bfd_get_debug_link_info_1': /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1231:16: error: implicit declaration of function 'strnlen' [-Werror=implicit-function-declaration] 1231 \| crc_offset = strnlen (name, size) + 1; \| ^~~~~~~ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1231:16: error: incompatible implicit declaration of built-in function 'strnlen' [-Werror] /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c: In function 'bfd_get_alt_debug_link_info': /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1319:20: error: incompatible implicit declaration of built-in function 'strnlen' [-Werror] 1319 \| buildid_offset = strnlen (name, size) + 1; \| ^~~~~~~ and in a couple of other places. The platform lacks strnlen, and while libiberty.h can provide a fallback declaration, the necessary configure test isn't run. Fixed with the following patch. Tested on i386-pc-solaris2.10. 2021-07-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> bfd: * configure.ac: Check for strnlen declaration. * configure, config.in: Regenerate. binutils: * configure.ac: Check for strnlen declaration. * configure, config.in: Regenerate.	5 years ago
Alan Modra	985e026451	PR27725, better objcopy -p times Nanosecond rather than second resolution. PR 27725 * configure.ac: Check for sys/time.h and utimensat. Use standard checks for mkstemp and mkdtemp. Whitespace. Check for nanosecond members of struct stat. * rename.c: Prefer sys/time.h for utimes over utime.h for utime. (STAT_TIMESPEC, STAT_TIMESPEC_NS): Define (get_stat_atime_ns, get_stat_mtime_ns): New inline functions. (get_stat_atime, get_stat_mtime): Likewise. (set_times): Choose first available of utimensat, utimes, utime. Use above inline functions to set timespec and timeval values. * configure: Regenerate. * config.in: Regenerate. * testsuite/binutils-all/objcopy.exp (objcopy_test): Add test of file timestamp when --preserve-dates is used.	5 years ago
Alan Modra	43e05cd4f4	ENABLE_CHECKING in bfd, opcodes, binutils, ld gas already has this. Here it enables checking hash table type passed to elf_link_hash_lookup and elf_link_hash_traverse. bfd/ * elf-bfd.h (ENABLE_CHECKING): Define. (elf_link_hash_lookup): Abort if wrong type of hash table. (elf_link_hash_traverse): Likewise. * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate. binutils/ * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate. ld/ * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate. opcodes/ * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate.	5 years ago
Alan Modra	87b9f2556d	C99 binutils configury * configure.ac: Assume long long is available. Don't test for strings.h, stdlib.h, limits.h, locale.h, or wchar.h. Check inttypes.h, stdint.h, sys/stat.h and sys/types.h. Don't check for strcoll, setlocale, setmode or location of time_t. Don't check for fprintf, getenv, snprintf, strnlen, strstr or vsnprintf decls. (AC_ISC_POSIX, AXC_HEADER_STRING, AC_FUNC_ALLOCA): Don't invoke. * sysdep.h: Don't include alloca-conf.h, include config.h instead. Test HAVE_SYS_TYPES_H and reorder includes. Include limits.h, locale.h, string.h and stdlib.h unconditionally. Remove various fallback declarations. Assume long long is available. * addr2line.c: Don't test HAVE_SETLOCALE. * ar.c: Likewise. * coffdump.c: Likewise. * dlltool.c: Likewise. * dllwrap.c: Likewise. * elfedit.c: Likewise. * nm.c: Likewise. * objcopy.c: Likewise. * objdump.c: Likewise. * readelf.c: Likewise. * size.c: Likewise. * srconv.c: Likewise. * strings.c: Likewise. * sysdump.c: Likewise. * windmc.c: Likewise. * windres.c: Likewise. * bucomm.c: Don't test HAVE_TIME_T_IN_TIME_H or HAVE_TIME_T_IN_TYPES_H. * dwarf.c: Include limits.h unconditionally. Assume long long is available. * nm.c: Don't test HAVE_STRCOLL. * readelf.c: Don't test HAVE_WCHAR_H. * strings.c: Assume long long is available. * syslex.l: Include string.h unconditionally. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate.	5 years ago
Nick Clifton	c46b706620	Change the readelf and objdump programs so that they will automatically follow links to separate debug info files. * configure.ac (follow-debug-links): Add option to enable or disable the following of debug links by default. Set the default for the option to be 'follow'. * dwarf.c (do_follow_links): Initialise with DEFAULT_FOR_FOLLOW_LINKS. (dwarf_select_sections_by_names): Add no-follow-links option. (dwarf_select_sections_by_letter): Add 'N' option. * objdump.c (usage): Add conditional text describing the follow links option. (slurp_symtab): Ensure that there is a NULL entry at the end of the symbol table. (slurp_dynamic_symtab): Likewise. (dump_bfd): When extending the symbol table, ensure that there is still a NULL entry at the end. * readelf.c (usage): Add conditional text describing the follow links option. * doc/binutils.texi: Update documentation for objcopy and readelf. * doc/debug.options.texi: Update documentation of the follow-links option. * config.in: Regenerate. * configure: Regenerate. * testsuite/binutils-all/compress.exp: Add the -WN option to objdump command lines that are not expecting to follow links. * testsuite/binutils-all/readelf.exp: Add the --debug-dump=no-follow-links option to tests that are not expecting to follow debug links. gas * testsuite/gas/mach-o/sections-1.d: Stop automatic debug link following. * testsuite/gas/xgate/insns-dwarf2.d: Likewise. ld * testsuite/ld-elf/sec64k.exp: Stop readelf from automatically following debug links.	6 years ago
Nick Clifton	e6f6aa8d18	Add option to nm to change the characters displayed for ifunc symbols. Add a configure time option to change the default characters. PR 22967 * nm.c (ifunc_type_chars): New variable. (long_options): Add --ifunc-chars. (print_symbol): Use ifunc_type_chars for ifunc symbols. (main): Handle the new option. * doc/binutils.texi: Document the new option. * configure.ac: Add --enable-f-for-ifunc-symbols option which changes the default symbol displayed by nm. * NEWS: Mention the new feature. * testsuite/binutils-all/nm.exp: Test the new feature. * config.in: Regenerate. * configure: Regenerate.	6 years ago
Nick Alcock	094e34f221	binutils, ld: work with --disable-libctf This unfortunately means conditionalizing out all the libctf code, but the result is not too unbearably ugly, if a bit repetitive. I have stubbed out code in the !ENABLE_LIBCTF path to avoid extra redundant ifdefs where it seems that might be helpful. (The stubs are not too disruptive, but I've tried to keep them on one line where possible to avoid filling up the screen with stubs that nobody would care about. If this is too much of a coding style violation I can change it.) Changes since v2: use GCC_ENABLE rather than repeating all the AC_ARG_ENABLE stuff over and over again. ld/ * configure.ac [--enable-libctf]: New, default yes. Set ENABLE_LIBCTF accordingly. * Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * ldlang.c (ctf_output): Conditionalize on ENABLE_LIBCTF. (ldlang_open_ctf): Likewise. (lang_merge_ctf): Likewise. (ldlang_ctf_apply_strsym): Likewise. (lang_write_ctf): Likewise. (ldlang_write_ctf_late): Likewise. (ldlang_open_ctf) [!ENABLE_LIBCTF]: Warn about the presence of CTF sections. (lang_merge_ctf) [!ENABLE_LIBCTF]: New stub. (ldlang_ctf_apply_strsym) [!ENABLE_LIBCTF]: Likewise. (lang_write_ctf) [!ENABLE_LIBCTF]: Likewise. (ldlang_write_ctf_late) [!ENABLE_LIBCTF]: Likewise. * ldelfgen.c (ldelf_emit_ctf_early): Conditionalize on ENABLE_LIBCTF. (struct ctf_strsym_iter_cb_arg): Likewise. (ldelf_ctf_strtab_iter_cb): Likewise. (ldelf_ctf_symbols_iter_cb): Likewise. (ldelf_examine_strtab_for_ctf): Likewise. (ldelf_emit_ctf_early) [!ENABLE_LIBCTF]: New stub. (ldelf_examine_strtab_for_ctf) [!ENABLE_LIBCTF]: New stub. binutils/ * configure.ac [--enable-libctf]: New, default yes. Set ENABLE_LIBCTF accordingly. * Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF and LIBCTF_NOBFD. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * objdump.c (usage): Conditionalize portions on ENABLE_LIBCTF. (option_values): Likewise. (long_options): Likewise. (main): Likewise. (dump_ctf_indent_lines): Conditionalize out when !ENABLE_LIBCTF. (make_ctfsect): Likewise. (dump_ctf_archive_member): Likewise. (dump_ctf) [ENABLE_LIBCTF]: Likewise. (dump_ctf) [!ENABLE_LIBCTF]: New empty stub. * readelf.c (options): Conditionalize portions on ENABLE_LIBCTF. (usage): Likewise. (process_section_contents): Likewise. (shdr_to_ctf_sect): Conditionalize out when !ENABLE_LIBCTF. (dump_ctf_indent_lines): Likewise. (dump_section_as_ctf) [ENABLE_LIBCTF]: Likewise.	7 years ago
Aaron Merey	301a9420d9	Add support for debuginfod to the binutils (disable by default, enabled via a configure time option). debuginfod is a lightweight web service that indexes ELF/DWARF debugging resources by build-id and serves them over HTTP. This patch enables objdump and readelf to query debuginfod servers when they are otherwise not able to find separate debug files. Binutils can be built with debuginfod using the --with-debuginfod configure option. This requires that libdebuginfod be installed and found at configure time. debuginfod is packaged with elfutils, starting with version 0.178. For more information see https://sourceware.org/elfutils/. toplevel* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds new configure option --with-debuginfod. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD. binutils* Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod. * Makefile.in: Regenerate. * NEWS: Update. * config.in: Regenerate. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD. * doc/Makefile.in: Regenerate. * doc/binutils.texi: Add section on using binutils with debuginfod. * dwarf.c (debuginfod_fetch_separate_debug_info): New function. Query debuginfod servers for the target debug file. (load_separate_debug_info): Call debuginfod_fetch_separate_debug_info if configured with debuginfod. (load_separate_debug_files): Add file argument to load_separate_debug_info calls. * dwarf.h (get_build_id): Add declaration. * objdump.c (get_build_id): New function. Get build-id of file. * readelf.c (get_build_id): Likewise. * testsuite/binutils-all/debuginfod.exp: New tests. * testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id section.	7 years ago
Nick Clifton	79b377b3cf	Revert patch that disables building libctf for non-ELF based targets. Revert: binutls 2019-05-29 Nick Clifton <nickc@redhat.com> * configure.ac (LIBCTF): Export. Set to empty for non-ELF based targets. (HAVE_LIBCTF): Define if libctf support is available. * Makefile.am (LIBCTF): Set value to @LIBCTF@. * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being defined. * readelf.c: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * config.in: Regenerate. top 2019-05-29 Nick Clifton <nickc@redhat.com> * configure.ac (noconfigdirs): Add libctf if the target does not use the ELF file format. * configure: Regenerate.	7 years ago
Nick Clifton	90bd54236c	Do not build libctf for targets that do not use the ELF file format. top * configure.ac (noconfigdirs): Add libctf if the target does not use the ELF file format. * configure: Regenerate. binutils* configure.ac (LIBCTF): Export. Set to empty for non-ELF based targets. (HAVE_LIBCTF): Define if libctf support is available. * Makefile.am (LIBCTF): Set value to @LIBCTF@. * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being defined. * readelf.c: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * config.in: Regenerate.	7 years ago
H.J. Lu	34156b2386	binutils: Add AC_FUNC_MMAP to configure.ac Add AC_FUNC_MMAP to configure.ac so that HAVE_MMAP will be checked in objdump.c and mmap is used if available. * configure.ac (AC_FUNC_MMAP): New. * config.in: Regenerated. * configure: Likewise.	8 years ago
Simon Marchi	d0ac1c4488	Bump to autoconf 2.69 and automake 1.15.1 When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.	8 years ago
Sam Thursfield	1f5345a614	binutils: Fix warning on platforms that don't have asprintf * configure.ac (AC_CHECK_DECLS): Add asprintf. * config.in: Regenerate. * configure: Regenerate.	10 years ago
H.J. Lu	0ee42ecde7	Add --with-system-zlib in binutils This patch adds --with-system-zlib and remove --with-zlib in binutils. * Makefile.am (ZLIB): New. (ZLIBINC): Likewise. (AM_CFLAGS): Add $(ZLIBINC). (readelf_LDADD): Add $(ZLIB). * configure.ac (AM_ZLIB): Removed. (zlibdir): New. AC_SUBST. (zlibinc): Likewise. Add --with-system-zlib. * readelf.c: Don't check HAVE_ZLIB_H to include <zlib.h>. (uncompress_section_contents): Don't check HAVE_ZLIB_H. * Makefile.in: Regenerated. * config.in: Likewise. * configure: Likewise.	12 years ago
Alan Modra	4c219c2e69	Use autoconf check for long long in binutils Also fix a place where %lld was wrongly used to print a dwarf_vma. * configure.ac: Check for long long and sizes of long long and long. * elfcomm.h (HOST_WIDEST_INT): Test HAVE_LONG_LONG in place of __STDC_VERSION__ and __GNUC__. * strings.c (print_strings): Likewise. * dwarf.c (DWARF_VMA_FMT, DWARF_VMA_FMT_LONG): Likewise. (read_debug_line_header): Use dwarf_vmatoa to print warning. * configure: Regenerate. * config.in: Regenerate.	12 years ago
Nick Clifton	7fac9594c4	In response to a public outcry the strings program now defaults to using the --all option which displays text from anywhere in the input file(s). The default used to be --data, which only displays text from loadable data sections, but this requires the use of the BFD library. Since the BFD library almost certainly still contains buffer overrun and/or memory corruption bugs, and since the strings program is often used to examine malicious code, it was decided that the --data option option represents a possible security risk. * strings.c: Add new command line option --data to only scan the initialized, loadable data secions of binaries. Choose the default behaviour of --all or --data based upon a configure option. * doc/binutils.texi (strings): Update documentation. Include description of why the --data option might be unsafe. * configure.ac: Add new option --disable-default-strings-all which restores the old behaviour of strings using --data by default. If the option is not used make strings use --all by default. * NEWS: Mention the new behaviour of strings. * configure: Regenerate. * config.in: Regenerate.	12 years ago
Alan Modra	b879806f2f	configury changes to make ld plugin support controlled by --enable-plugins This also makes --enable-plugins default to on for hosts that can support plugins, so we have consistent lto toolchain support. The ACX_LARGEFILE moves aren't strictly necessary, but are harmless and will be necessary if plugin support is extended to more hosts via libtool's dlopen support. I started down that path then decided it was more work than I was interested in doing. (ACX_LARGEFILE invokes AC_PLUGINS.) config/ * plugins.m4: Test for dlfcn.h or windows.h here to set default for --enable-plugins. Report error if someone tries to enable plugins on a host we don't support. bfd/ * configure.ac: Delete redundant plugin related checks. * configure: Regenerate. binutils/ * configure.ac: Move ACX_LARGEFILE after LT_INIT. * config.in: Regenerate. * configure: Regenerate. gas/ * configure.ac: Move ACX_LARGEFILE after LT_INIT. * config.in: Regenerate. * configure: Regenerate. gprof/ * configure.ac: Move ACX_LARGEFILE after LT_INIT. * configure: Regenerate. * gconfig.in: Regenerate. ld/ * configure.ac: Move AC_PROG_CC and other macros earlier. Delete plugin checks now done in config/plugins.m4. * config.in: Regenerate. * configure: Regenerate.	12 years ago
Alan Modra	35eafcc71b	Rename configure.in to configure.ac bfd/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. opcodes/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. binutils/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. gas/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. gprof/ * configure.ac: Rename from configure.in. * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * gconfig.in: Regenerate. ld/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate.	12 years ago
Alan Modra	952781e82c	PR binutils/15324 * configure.in: Add strnlen to AC_CHECK_DECLS, sort. * dwarf.c (strnlen): Provide fallback decl. * config.in: Regnerate. * configure: Regenerate.	14 years ago
Alan Modra	e6f881072f	* configure.in: Apply 2012-09-10 change to config.in here. Add __CONFIG_H__ check. * config.in: Regenerate.	14 years ago
Nick Clifton	3bfcb6528e	bfd:	14 years ago
Alan Modra	00716ab174	* config.in: Disable sanity check for kfreebsd.	14 years ago
Andreas Schwab	f2c621e45e	bfd/ * aclocal.m4: Regenerate. * Makefile.in: Regenerate. binutils/ * aclocal.m4: Regenerate. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate. gas/ * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate.	14 years ago
Nick Clifton	df7b86aa4c	PR 14072 * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * alpha-opc.c: Include sysdep.h before any other header file. * alpha-dis.c: Likewise. * avr-dis.c: Likewise. * cgen-opc.c: Likewise. * cr16-dis.c: Likewise. * cris-dis.c: Likewise. * crx-dis.c: Likewise. * d10v-dis.c: Likewise. * d10v-opc.c: Likewise. * d30v-dis.c: Likewise. * d30v-opc.c: Likewise. * h8500-dis.c: Likewise. * i370-dis.c: Likewise. * i370-opc.c: Likewise. * m10200-dis.c: Likewise. * m10300-dis.c: Likewise. * micromips-opc.c: Likewise. * mips-opc.c: Likewise. * mips61-opc.c: Likewise. * moxie-dis.c: Likewise. * or32-opc.c: Likewise. * pj-dis.c: Likewise. * ppc-dis.c: Likewise. * ppc-opc.c: Likewise. * s390-dis.c: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Likewise. * sparc-dis.c: Likewise. * sparc-opc.c: Likewise. * spu-dis.c: Likewise. * tic30-dis.c: Likewise. * tic54x-dis.c: Likewise. * tic80-dis.c: Likewise. * tic80-opc.c: Likewise. * tilegx-dis.c: Likewise. * tilepro-dis.c: Likewise. * v850-dis.c: Likewise. * v850-opc.c: Likewise. * vax-dis.c: Likewise. * w65-dis.c: Likewise. * xgate-dis.c: Likewise. * xtensa-dis.c: Likewise. * rl78-decode.opc: Likewise. * rl78-decode.c: Regenerate. * rx-decode.opc: Likewise. * rx-decode.c: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * bfd-in.h: Generate an error if included before config.h. * sysdep.h: Likewise. * bfd-in2.h: Regenerate. * compress.c: Remove #include "config.h". * plugin.c: Likewise. * elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h. * elf64-hppa.c: Likewise. * som.c: Likewise. * xsymc.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * Makefile.am: Use wrappers around C files generated by flex. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * itbl-lex-wrapper.c: New file. * config/bfin-lex-wrapper.c: New file. * cgen.c: Include as.h before setjmp.h. * config/tc-dlx.c: Include as.h before any other header. * config/tc-h8300.c: Likewise. * config/tc-lm32.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-or32.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-xtensa.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * unwind-ia64.h: Include config.h.	14 years ago
Roland McGrath	5879767462	binutils/ 2012-04-06 Roland McGrath <mcgrathr@google.com> * configure.in (AC_CHECK_HEADERS): Add locale.h. * config.in: Regenerate. * configure: Regenerate. gas/ 2012-04-06 Roland McGrath <mcgrathr@google.com> * configure.in (AC_CHECK_HEADERS): Add locale.h. * config.in: Regenerate. * configure: Regenerate. gold/ 2012-04-06 Roland McGrath <mcgrathr@google.com> * configure.in (AC_CHECK_HEADERS): Add locale.h. * config.in: Regenerate. * configure: Regenerate. ld/ 2012-04-06 Roland McGrath <mcgrathr@google.com> * configure.in (AC_CHECK_HEADERS): Add locale.h. * config.in: Regenerate. * configure: Regenerate.	15 years ago
Nick Clifton	443507505d	* configure.in (AC_CHECK_FUNCS): Add setlocale. (AM_LC_MESSAGES): Add. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate.	15 years ago
Roland McGrath	9cb80f72d8	* configure.in (--enable-deterministic-archives): Grok new argument. Set DEFAULT_AR_DETERMINISTIC to 1 or 0 accordingly. * configure: Regenerated. * config.in: Regenerated. * ar.c (deterministic): Initialize to -1. (decode_options, ranlib_main): Grok U option. (usage, ranlib_usage): Mention U; say for D and U which is the default. (default_deterministic): New function. (ranlib_main): Call it. (main): Likewise. Make newer_only && deterministic error non-fatal if it was just DEFAULT_AR_DETERMINISTIC and not the D option. * doc/binutils.texi (ar cmdline, ranlib): Document U modifier and --enable-deterministic-archives behavior.	15 years ago
Jan Kratochvil	ee2fb9eb60	binutils/ * configure.in: Stop checking for fopen64 and stat64. * strings.c (file_off, file_open, statbuf, file_stat): Remove. (strings_file): Change file_off to file_ptr, file_open to fopen, statbuf to struct stat and file_stat to stat. (get_char): Change parameter type file_off * to file_ptr . (print_strings): Change parameter and variable `start' type file_off to file_ptr. configure: Regenerate. * config.in: Regenerate.	17 years ago
Ralf Wildenhues	81ecdfbb4d	Regenerate tree using Autoconf 2.64 and Automake 1.11. config/: * override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64. /: * configure: Regenerate. etc/: * configure: Regenerate. sim/common/: * config.in: Regenerate. * configure: Likewise. sim/iq2000/: * config.in: Regenerate. * configure: Likewise. sim/d10v/: * config.in: Regenerate. * configure: Likewise. sim/igen/: * config.in: Regenerate. * configure: Likewise. sim/m32r/: * config.in: Regenerate. * configure: Likewise. sim/frv/: * config.in: Regenerate. * configure: Likewise. sim/: * avr/config.in: Regenerate. * avr/configure: Likewise. * configure: Likewise. * cris/config.in: Likewise. * cris/configure: Likewise. sim/h8300/: * config.in: Regenerate. * configure: Likewise. sim/mn10300/: * config.in: Regenerate. * configure: Likewise. sim/ppc/: * config.in: Regenerate. * configure: Likewise. sim/erc32/: * config.in: Regenerate. * configure: Likewise. sim/arm/: * config.in: Regenerate. * configure: Likewise. sim/m68hc11/: * config.in: Regenerate. * configure: Likewise. sim/lm32/: * config.in: Regenerate. * configure: Likewise. sim/sh64/: * config.in: Regenerate. * configure: Likewise. sim/v850/: * config.in: Regenerate. * configure: Likewise. sim/cr16/: * config.in: Regenerate. * configure: Likewise. sim/moxie/: * config.in: Regenerate. * configure: Likewise. sim/m32c/: * config.in: Regenerate. * configure: Likewise. sim/mips/: * config.in: Regenerate. * configure: Likewise. sim/mcore/: * config.in: Regenerate. * configure: Likewise. sim/testsuite/d10v-elf/: * configure: Regenerate. sim/testsuite/: * configure: Regenerate. sim/testsuite/frv-elf/: * configure: Regenerate. sim/testsuite/m32r-elf/: * configure: Regenerate. sim/testsuite/mips64el-elf/: * configure: Regenerate. sim/sh/: * config.in: Regenerate. * configure: Likewise. gold/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * testsuite/Makefile.in: Likewise. gprof/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. * gconfig.in: Likewise. opcodes/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gas/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. ld/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gdb/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. * gnulib/Makefile.in: Likewise. gdb/doc/: * configure: Regenerate. gdb/gdbserver/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. gdb/testsuite/: * configure: Regenerate. * gdb.hp/configure: Likewise. * gdb.hp/gdb.aCC/configure: Likewise. * gdb.hp/gdb.base-hp/configure: Likewise. * gdb.hp/gdb.compat/configure: Likewise. * gdb.hp/gdb.defects/configure: Likewise. * gdb.hp/gdb.objdbg/configure: Likewise. * gdb.stabs/configure: Likewise. binutils/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. bfd/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. bfd/doc/: * Makefile.in: Regenerate. readline/: * configure: Regenerate. readline/examples/rlfe/: * configure: Regenerate.	17 years ago
Jan Kratochvil	d053aef827	bfd/ Fix loading large elf64 binaries on 32bit hosts. * configure.in: Call AC_SYS_LARGEFILE. * config.in: Regenerate. * configure: Regenerate. binutils/ Fix loading large elf64 binaries on 32bit hosts. * configure.in: Call AC_SYS_LARGEFILE. * config.in: Regenerate. * configure: Regenerate. gas/ * configure.in: Call AC_SYS_LARGEFILE. * config.in: Regenerate. * configure: Regenerate. gprof/ * configure.in: Call AC_SYS_LARGEFILE. * gconfig.in: Regenerate. * configure: Regenerate. ld/ * configure.in: Call AC_SYS_LARGEFILE. * config.in: Regenerate. * configure: Regenerate. libiberty/ * configure.in: Call AC_SYS_LARGEFILE. * config.in: Regenerate. * configure: Regenerate.	18 years ago
Alan Modra	7357c5b6a6	PR 6526 * configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.	18 years ago
Craig Silverstein	1b31505692	bfd/ * Makefile.am (BFD32_LIBS): Add compress.lo. (BFD32_LIBS_CFILES): Add compress.c. (BFD_H_FILES): Likewise. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * config.in: Add HAVE_ZLIB_H * configure.in: Add test for libz and zlib.h * configure: Regenerate. * dwarf2.c (read_section): New function. (read_indirect_string): Call new function read_section. (read_abbrevs): Likewise. (decode_line_info): Likewise. (read_debug_ranges): Likewise. (find_line): Call new function read_section when just one .zdebug_info section is found, otherwise read and compress multiple sections. (_bfd_dwarf2_cleanup_debug_info): Free sec_info_ptr. * elf.c (_bfd_elf_make_section_from_shdr): Add zdebug prefix. (special_sections_z): New struct. (special_sections): Refer to special_sections_z. * elfxx-mips.c (_bfd_mips_elf_section_from_shdr): Recognize sections named .zdebug_. (_bfd_mips_elf_fake_sections): Likewise. compress.c: New file. (bfd_uncompress_section_contents): New function. bfd/doc/ * Makefile.am (BFD_H_DEP): Add ../compress.c. * Makefile.in: Regenerate. binutils/ * config.in: Add HAVE_ZLIB_H * configure.in: Add test for libz and zlib.h * configure: Regenerate. * dwarf.c (debug_displays): Add .zdebug_* strings. * dwarf.h (struct dwarf_section): Add fields uncompressed_namd and compressed_name. * objdump.c (load_debug_section): Call bfd_uncompress_section_contents when loading a compressed section. (dump_dwarf_section): Recognize compressed section name. (mach_o_dwarf_sections): Rename as mach_o_uncompressed_dwarf_sections. (mach_o_compressed_dwarf_sections): New variable. (generic_dwarf_section): Rename as generic_uncompressed_dwarf_sections. (generic_compressed_dwarf_sections): New variable. (check_mach_o_dwarf): Save and restore mach_o_compressed_dwarf_sections. * readelf.c: Add #include for config.h and zlib.h (process_section_headers): Recognize compressed section name. (uncompress_section_contents): New function. (load_debug_section): Call uncompress_section_contents when loading a compressed section. (display_debug_section): Recognize compressed section name. binutils/testsuite: * binutils-all/objdump.exp: Add test for objdump -s on a file with a compressed debug section. Add test for objdump -W on a file that contains a compressed debug section. * binutils-all/readelf.exp: Call readelf_compressed_wa_test. (readelf_compressed_wa_test): New function. * binutils-all/dw2-compressed.S: New file. * binutils-all/objdump.W: New file. * binutils-all/objdump.s: New file. * binutils-all/readelf.wa: New file.	18 years ago
Alan Modra	ae351704e2	Regenerate files.	19 years ago
Nick Clifton	5ba684e24c	* Makefile.am: Add LIBICONV to windres. * acinclude.m4: Added missing "lib-.m4" and "lt.m4" files. * configure.in: Add AC_CHECK_HEADER for iconv.h and use AM_ICONV. * config.in: Add ICONV defines. * aclocal: Regenerate. * confugure: Regenerate. * winduni.c: (local_iconv_map codepages, wind_language_t, languages, unicode_is$ (ascii_from_unicode): Use codepage_from_unicode. (ascii_from_unicode): Use unicode_from_codepage. Use for cygwin windows API for unicode transformation. * winduni.h: (CP_ACP, CP_UTF7, CP_UTF8, CP_OEM, CP_UTF16): New macros. (wind_language_t, local_iconv_map): New types. (wind_find_language_by_id, wind_find_language_by_codepage, (unicode_is_valid_codepage, wind_find_codepage_info, unicode_from_codepage, c$	19 years ago
H.J. Lu	13a09c7cb4	2006-10-29 H.J. Lu <hongjiu.lu@intel.com> PR binutils/3384 * configure.in (AC_CHECK_HEADERS): Add limits.h and sys/param.h. * configure: Regenerated. * config.in: Likewise. * readelf.c: Include <limits.h> and <sys/param.h> for PATH_MAX. (program_interpreter): Allocate PATH_MAX bytes instead of 64. (process_program_headers): Don't assume that program interpreter is shorter than 64 characters.	20 years ago
Nick Clifton	f9c026a85b	PR binutils/2876 * configure.in: Check for the mkstemp and mkdtemp functions. * configure: Regenerate. * config.in (HAVE_MKDTEMP): New potential define. (MAKE_MKSTEMP): Likewise. * bucomm.c (make_tempname): Use mkstemp if it is available. * make_tempdir): New function: Create a temporary directory using mkdtemp, if it is available. * bucomm.h (make_tempdir): New prototype. * objcopy.c (copy_archive): Use make_tempdir if it is available. (strip_main): Produce an warning message if a temporary file could not be (copy_main): Likewise. * ar.c (write_archive): Likewise.	20 years ago
Alan Modra	8c61c1533b	* config.in: Regenerate.	20 years ago
Jakub Jelinek	82de001fc3	gas/ * config.in: Rebuilt. binutils/ * config.in: Rebuilt.	21 years ago
H.J. Lu	3e321448fa	2005-08-16 H.J. Lu <hongjiu.lu@intel.com> * bucomm.h (stpcpy): Declare if HAVE_DECL_STPCPY isn't defined. * configure.in (AC_GNU_SOURCE): Added. (AC_CHECK_DECLS): Add stpcpy. * configure: Regenerated. * config.in: Likewise.	21 years ago
Steve Ellcey	398ee8f162	* configure.in (AM_BINUTILS_WARNINGS): Add. (BFD_NEED_DECLARATION): Replace with AC_CHECK_DECLS. * configure: Regenerate. * config.in: Regenerate. * objdump.c (NEED_DECLARATION_): Replace with !HAVE_DECL_. * bucomm.h: (NEED_DECLARATION_*): Ditto.	21 years ago
Jim Wilson	b7d4af3a12	Patch from Steve Ellcey for hpux build failure. * configure.in: Check for getc_unlocked prototype. * configure: Regenerate. * config.in: Regenerate. * strings.c (get_char): Only call getc_unlocked if we have seen a prototype.	21 years ago

1 2

69 Commits (cd9b374ffe372dcaf7e4c15548cf53a301d8dcdd)