binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Andrew Cagney	ab4e3d93a0	2003-08-04 Andrew Cagney <cagney@redhat.com> * monitor.h (monitor_dump_reg_block): Remove ATTR_FORMAT. * cli/cli-script.c (define_command): Call query directly, instead of passing it a buffer. * ocd.c (ocd_error): Pass error a constant format string. * remote-mips.c (mips_error): Use fputs_filtered.	23 years ago
Andrew Cagney	da3331ec16	2003-04-12 Andrew Cagney <cagney@redhat.com> * gdbarch.sh: Add missing opaque declarations. * gdbarch.h: Regnerate. * symtab.h: Add missing opaque declarations. * value.h, target.h, symfile.h, stabsread.h: Ditto. * x86-64-tdep.h, xmodem.h, monitor.h, typeprint.h: Ditto. * srec.h, solib-svr4.h, source.h, inferior.h: Ditto. * ser-unix.h, serial.h, remote-utils.h, gdbcore.h: Ditto. * ppc-tdep.h, ocd.h, mips-tdep.h, gdbtypes.h: Ditto. * buildsym.h, builtin-regs.h, linespec.h, language.h: Ditto. * i387-tdep.h, gdbthread.h, event-top.h, gdb.h: Ditto. * dwarf2cfi.h, doublest.h, disasm.h, cp-abi.h: Ditto. * cli-out.h, c-lang.h, ax-gdb.h, arch-utils.h: Ditto. * ada-lang.h, config/nm-lynx.h, config/nm-linux.h: Ditto. * config/sparc/tm-sp64.h, config/rs6000/tm-rs6000.h: Ditto. * config/pa/tm-hppah.h, config/m68k/tm-delta68.h: Ditto. * cli/cli-setshow.h, cli/cli-script.h: Ditto.	24 years ago
Andrew Cagney	570b8f7c95	2003-01-18 Andrew Cagney <ac131313@redhat.com> * cris-tdep.c: Fix function declaration indentation. * dwarfread.c, gdbcore.h, gdbtypes.h, i386v-nat.c: Ditto. * mips-tdep.c, monitor.h, parse.c, proc-utils.h: Ditto. * rs6000-nat.c, ser-go32.c, somread.c, stabsread.c: Ditto. * symfile.h, symtab.h, target.c, target.h, value.h: Ditto. * xcoffread.c, config/pa/tm-hppa.h: Ditto. * config/sparc/tm-sp64.h, config/sparc/tm-sparc.h: Ditto.	24 years ago
Grace Sainsbury	1c617db829	* monitor.h: Add the function regname to monitor_ops structure. This way NUM_REGS does not have to be a constant. * monitor.c (monitor_fetch_register): Added support for regname function. The function is called if the array regnames is NULL. (monitor_store_register): Same. * cpu32bug-rom.c (cpu32bug_regname): Add function. Replaces regnames array. (init_cpu32bug_cmds): set cpu32bug_cmds.regnames to NULL, cpu32bug_cmds.regname to point to new function. * abug-rom.c (abug_regname): Same as above. (init_abug_cmds): Same. * dbug-rom.c (dbug_regname): Same as above. (init_dbug_cmds): Same. * remote-est.c (est_regname): Same. (init_est_cmds): Same. * rom68k-rom.c (rom68k_regname): Same. (init_rom68k_cmds): Same.	25 years ago
Andrew Cagney	17732724f3	Update makefile.in dependencies. Add header wrappers.	25 years ago
Andrew Cagney	ba3a85231b	* remote-utils.h (struct serial): Declare as opaque. Remove include of "serial.h". * Makefile.in (remote_utils_h): Update. * monitor.h (struct serial): Declare as opaque. Remove include of "serial.h". (struct monitor_ops): Replace serial_t with `struct serial '. monitor.c (monitor_desc): Ditto.	25 years ago
Kevin Buettner	b6ba6518e9	Update/correct copyright notices.	26 years ago
J.T. Conklin	4930751aae	* TODO: Note abstraction layer violation where "ocd reset" command must invalidate the dcache, and how this might be fixed. * monitor.c (#include "dcache.h"): Removed. (remote_dcache): Removed. (monitor_open): Removed code that created local dcache. (flush_monitor_dcache): Removed (unused function). (monitor_resume): Removed call to dcache_invd(). (monitor_load): Likewise. (monitor_xfer_memory): Changed to call monitor_write_memory(), monitor_write_memory_block(), and monitor_read_memory() instead of dcache_xfer_memory(). * monitor.h (flush_monitor_dcache): Removed (unused function). * ocd.c (#include "dcache.h"): Removed. (ocd_dcache): Removed. (ocd_open): Removed code that created local dcache. (ocd_resume): Removed call to dcache_invd(). (ocd_xfer_memory): Changed to call ocd_write_bytes() and ocd_read_bytes() instead of dcache_xfer_memory(). (bdm_reset_command): Invalidate target dcache. * remote-bug.c (bug_load): Remove call to dcache_invd(). (bug_resume): Likewise. (bug_settings): Remove dcache, readfunc, and writefunc fields from initializer. (bug_xfer_memory): Changed to call bug_read_memory() and bug_write_memory() instead of dcache_xfer_memory(). * remote-nindy.c (#include "dcache.h"): Removed. (nindy_dcache): Removed. (nindy_open): Removed code that created local dcache. (nindy_resume): Removed call to dcache_invd(). (nindy_load): Likewise. (nindy_xfer_inferior_memory): Changed to call ninMemPut() and ninMemGet() instead of dcache_xfer_memory(). * remote-sds.c (#include "dcache.h"): Removed. (sds_dcache): Removed. (sds_open): Removed code that created local dcache. (sds_resume): Removed call to dcache_invd(). (sds_xfer_memory): Changed to call sds_write_bytes() and sds_read_bytes() instead of dcache_xfer_memory(). * remote-utils.c (gr_open): Removed code that created local dcache. * remote-utils.h (#include "dcache.h"): Removed. (struct gr_settings): Removed dcache, readfunc, and writefunc fields. (gr_get_dcache, gr_set_dcache): Removed macro definitions. * remote.c (#include "dcache.h"): Removed. (remote_dcache): Removed. (remote_open_1): Removed code that created local dcache. (remote_async_open_1): Likewise. (remote_resume): Removed call to dcache_invd(). (remote_async_resume): Likewise. (remote_xfer_memory): Changed to call remote_write_bytes() and remote_read_bytes() instead of dcache_xfer_memory(). * wince.c (#include "dcache.h"): Removed. (remote_dcache): Removed. (child_create_inferior): Removed code that created local dcache. (child_xfer_memory): Changed to call remote_write_bytes() and remote_read_bytes() instead of dcache_xfer_memory(). (child_resume): Removed call to dcache_invd(). * target.c (target_dcache): Added. (target_load): Invalidate target_dcache. (do_xfer_memory): New function. (target_xfer_memory): Reimplement in terms of dcache_xfer_memory(). (target_xfer_memory_partial): Likewise. (initialize_targets): Create target_dcache. * target.h (#include "dcache.h"): Added. (target_open): Invalidate target_dcache. (target_resume): Likewise. (do_xfer_memory): New declaration. * dcache.c (dcache_init): Removed reading and writing arguments. (dcache_struct): Removed read_memory and write_memory fields. (dcache_write_line): Call do_xfer_memory. (dcache_read_line): Likewise. (dcache_xfer_memory): Likewise. (dcache_invalidate): Renamed from dcache_invd. (dcache_init): Updated. (dcache_xfer_memory): Updated. * dcache.h (memxferfunc): Removed definition.	26 years ago
Kevin Buettner	dee8b1a1c5	Eliminate PARAMS.	27 years ago
Kevin Buettner	507f3c78fb	Eliminate PARAMS from function pointer declarations.	27 years ago
Kevin Buettner	a14ed312fd	PARAMS removal.	27 years ago
Jason Molenda	c5aa993b1f	import gdb-1999-07-07 post reformat	28 years ago
Jason Molenda	9e086581c7	import gdb-1999-0519	28 years ago
Stan Shebs	c906108c21	Initial creation of sourceware repository	28 years ago
Stan Shebs	071ea11e85	Initial creation of sourceware repository	28 years ago
Andrew Cagney	1c3cd1b020	Clean up function return types. Functions not returning values, functions unnecessarily returning values.	28 years ago
John Metzler	2a8b1fab7c	Wed Apr 29 10:20:40 1998 John Metzler <jmetzler@cygnus.com> * nec4102rom.c : New file implements rom monitor adapter for nec-vr4102 board. This board hosts the vr4111 chip. This file required extenstions to the monitor_ops structure, hooks for wiat filter, new flags. This version does not support more than one breakpoint and resuming after a breakpoint in 16 bit mode is completely disfunctional. * monitor.h : Defined additional hooks for dmpregs, confinuer_hooks and wait_filter. These additions require that all rom monitor interfaces be recoded to to initializa monitor ops using assignments rather than static structure initialization. Added new bits to flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES * monitor.c (RDEBUG): Conditional tracing throughout the file. (fromhex): Now recognized upper cse hex digits (monitor_printf_noecho): (monitor_readchar): Tracing interferes with input timing. (monitor_open): Register different memory write functions with dcache_init if MO_HAS_BLOCKWRITES. (flush_monior_dcache): Added as an additional utilty. (monitor-resume): Call continue hook if one has been supplied. (monitor_wait_filter): New function Factored out of monitor wait and used if alternate wait-filter has not been provided. (monitor_wait): call alternate wait filter if provided. Call monitor_dump_regs, a new function factored out from inline code. (monitor_dump_block): A new function used as a utility when monitors must dump several blocks of registers using different commands. (monitor_dump_regs): Call alternate function if provided. Uses new hook in monitor.h. (monitor_write_memory): Engage previouly added hook MO_FILL_USES_ADDR. (monitor_write_even_block): new function supports writing long blocks of 4byte words. (longlongendswap): new internal function (monitor_write_memory_longlongs): new function writes large blocks using command to enter a long long. (monitor_write-memory_block): new Function figures out which block mod to use. (monitor_read_memory): Can now handle dump formats in which the bytes preceeding the requested data is not printed. * monitor.h: Added new fields to the structure	29 years ago
Mark Alexander	1a31a33a93	* monitor.c (monitor_write, monitor_readchar): New functions. * monitor.h (monitor_write, monitor_readchar): Declare. * dve3900-rom.c: Add support for fast loading on ethernet connections.	29 years ago
Mark Alexander	352f9e9dc7	* monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define. * monitor.c (monitor_wait): Echo program output. * dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag, add MO_PRINT_PROGRAM_OUTPUT flag.	29 years ago
Mark Alexander	7e9576e098	* dve3900-rom.c: New file to support Densan DVE-R3900/20 board. * monitor.c (monitor_debug): Move to utils.c, rename to puts_debug. (monitor_write_memory, monitor_read_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Remove useless address bits if current monitor has MO_ADDR_BITS_REMOVE flag. * monitor.h (MO_ADDR_BITS_REMOVE): Define. * utils.c (puts_debug): Formerly monitor_debug from monitor.c; move here and make public. Add better support for carriage returns. * defs.h (puts_debug): Declare. * dsrec.c (load_srec): Use puts_debug to print remotedebug information. Output header record correctly. (make_srec): Output a header record instead of a termination record if sect is non-NULL (value is ignored), but abfd is NULL. * config/mips/tm-tx39.h (DEFAULT_MIPS_TYPE): Remove definition. (REGISTER_NAMES): Define to add R3900-specific registers. * config/mips/tm-tx39l.h: Ditto. * config/mips/tx39.mt (TDEPFILES): Add dve3900-rom.o and support files. * config/mips/tx39l.mt: Ditto.	29 years ago
Stan Shebs	c77bcbc2f7	* monitor.h (MO_SREC_ACK_PLUS, MO_SREC_ACK_ROTATE): New flags. * monitor.c (monitor_wait_srec_ack): Add DINK32-specific ack code. * dsrec.c (load_srec): Always write a header S-record. * dink32-rom.c (dink32_regnames): Fix the names of float registers. (dink32_cmds): Set to use S-record downloading with acks. * remote-est.c (est_cmds): Add MO_SREC_ACK_PLUS flag.	29 years ago
Stan Shebs	339cddf717	* dink32-rom.c: New file, support for DINK32 monitor. * Makefile.in (dink32-rom.o): Add build rule. * config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt (TDEPFILES): Add dink32-rom.o. * monitor.h (MO_32_REGS_PAIRED, MO_SETREG_INTERACTIVE, MO_SETMEM_INTERACTIVE, MO_GETMEM_16_BOUNDARY, MO_CLR_BREAK_1_BASED): New monitor interface flags. * monitor.c: Use them. (monitor_store_register): Use setreg.term if defined. (monitor_insert_breakpoint, monitor_remove_breakpoint): Notice if set_break and clr_break fields are empty.	29 years ago
Stu Grossman	0649bb3d69	* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.	30 years ago
Michael Snyder	8665f3dcfa	Thu Oct 31 16:37:17 1996 Michael Snyder <msnyder@cleaver.cygnus.com> * m32r-tdep.c: Improved frame_chain and fn prologue analysis. * configure.tgt: Add entry for m32r target. * monitor.h: Add a flag to tell monitor_store_register to use (val, regno) instead of (regno, val). * monitor.c: Make monitor_store_register honor the above flag. Make monitor_exp ignore DC1/DC3 for m32r. Increase buf size in monitor_dump_regs.	30 years ago
Dawn Perchik	012be3cec3	* configure,configure.in: Add target sparclet. * monitor.h,monitor.c: Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on setmem command), MO_RUN_FIRST_TIME (if command to start process running on target is different from one to continue execution), MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix). * monitor.c,parse.c,sparc-tdep.c: Don't require strings in the registers array. This is to allow NULLs to be place holders in the tm-.h file so that only minor changes are needed when a new processor is introduced (eg, one without floating point). sparc-tdep.c: Conditionally remove dependancies on floating point. * sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h: New files for target sparclet. * symfile.c: Add option for 2nd parameter on load command : a load offset added to the vma of each section.	31 years ago
Mark Alexander	c92f31c6e5	* dsrec.c (load_srec): Add WAITACK parameter, for machines like EST visionICE that send back an ACK after each S-record. * monitor.c (monitor_wait_srec_ack): New function. (monitor_load): Pass monitor_wait_srec_ack to load_srec if the monitor's MO_SREC_ACK flag is set. * monitor.h: Define MO_SREC_ACK flag. * remote-est.c (est_cmds): Add MO_SREC_ACK flag. * sh3-rom.c (sh3_load): Accomodate change in load_srec prototype. * srec.h: Add WAITACK parameter to load_srec prototype.	31 years ago
Stan Shebs	178ed33898	* monitor.h: Clean up comment formatting. (current_monitor): Remove decl. (LOADTYPES, LOADPROTOS, INIT_CMD, etc): Remove definitions. (push_monitor, SREC_SIZE): Remove. * monitor.c: Expand old macro into current_monitor derefs everywhere. * remote-os9k.c (current_monitor): Remove definition.	31 years ago
Dawn Perchik	2e665cd3ad	* mon960-rom.c: New file; support mon960 rom monitor on i960. * monitor.c (monitor_debug): Change remotedebug to buffer strings. * monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before epecting prompt and echo during open. * monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to determine if break should be sent as stop command. * monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN. * i960-tdep.c (mon960_frame_chain_valid): New function for getting stack frame on mon960. * Makefile.in: Add mon960 files. * configure.in: Changed i960--coff and i960--elf to target mon960; added i960-nindy-coff* and i960-nindy-elf* for target nindy. * configure: Regenerated. * config/i960/mon960.mt, config/i960/tm-mon960.h: New files; support mon960 rom monitor on i960.	31 years ago
Steve Chamberlain	c84e500001	* dsrec.c (load_srec): Remove unused variable. monitor.c (monitor_expect): Don't expect a ^C to echo. * serial.c (serial_open): Add parallel interface. * sh3-rom.c (parallel, parallel_in_use): New. (sh3_load): If parallel_in_use, download though the parallel port. (sh3_open): Open parallel port if specified. (sh3_close): New function. (_inititalize_sh3): Add sh3_close hook and documentation. * monitor.c (monitor_close): Export. * monitor.h (monitor_close): Add prototype.	31 years ago
Michael Meissner	721ccd808f	Make ppcbug work	31 years ago
Stu Grossman	fe5cfadd42	* monitor.h (struct memrw_cmd->resp_delim): Document this as a regexp.	31 years ago
Stu Grossman	1480482acb	* Makefile.in sh3-rom.c config/sh/sh.mt config/sh/tm-sh.h: Add sh3 monitor support. * monitor.c: Cleanup regexp compilation stuff to make it easier to use several regexps. * monitor.h: Get rid of struct rom_cmd_data. It's no longer used. * config/m68k/tm-monitor.h: Don't redefine NUM_REGS here. It just causes GDB to crash.	31 years ago
Fred Fish	6c9638b444	Update FSF address.	32 years ago
J.T. Conklin	e3033bb086	* defs.h (ATTR_FORMAT): New macro, expands to gcc's format attribute when compiled by gcc. * defs.h, language.h, monitor.h: Changed many function declarations to use ATTR_FORMAT. * breakpoint.c (delete_command); source.c (directory_command); top.c (define_command): Changed call to query() that had too many arguments. * printcmd.c (address_info): Changed call to printf_filtered() that had too many arguments.	32 years ago
J.T. Conklin	85c613aaa7	* utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered, printf_filtered, printf_unfiltered, printfi_filtered, query, warning, error, fatal, fatal_dump_core): Use stdarg.h macros when compiling with an ANSI compiler. * complain.c (complain): Likewise. * language.c (type_error, range_error): Likewise. * monitor.c (monitor_printf, monitor_printf_noecho): Likewise. * remote-array.c (printf_monitor, debuglogs): Likewise. * remote-mips.c (mips_error): Likewise. * remote-os9k.c (printf_monitor): Likewise. * remote-st.c (printf_stdebug): Likewise. * gdbtk.c (gdbtk_query): Likewise. * defs.h, complain.h, language.h, monitor.h: Add prototypes to match above changes. * printcmd.c: Remove uneeded #include <varargs.h>. * remote-e7000.c: Likewise. * f-typeprint.c (f_type_print_base): Fix typo found by above changes.	32 years ago
Stu Grossman	d8afcce964	* hppa-tdep.c (read_unwind_info): Cosmetic cleanup. * (unwind_command): Clean it up and make it print things out nicer. * monitor.c: Add ^C handling capability (mostly ripped off from remote.c). * (monitor_printf): Make it check the command echo. * (monitor_printf_noecho): Similar to above, but doesn't check for echo. * (monitor_stop): No longer waits for prompt. That is the job of the caller. This makes things work much better for monitor_wait, which waits for the prompt itself. * (monitor_open): Deal with new monitor_stop semantics. Also, flush input after sending init strings to get rid of junk that may be output. Also, don't always send \r to remote. Use monitor_ops->line_term cuz proper character isn't always \r. * (monitor_fetch_register): Switch to completely different algorithm to deal with lame-ass monitors which put spaces in the middle of numbers, and prompt with a space!!!!! * (monitor_read_memory_single): New routine to be used with monitors that can only return one byte/short/long at a time. This is selected via MO_GETMEM_READ_SINGLE. * (monitor_load_srec): Use monitor_printf_noecho for sending S records. Most targets don't echo them. * (monitor.h): Get rid of cmd_delim. Add line_delim. * op50n-rom.c (op50n_cmds): Fill it up. Make it work. * w89k-rom.c: Change all eols from \r to \n. Change load_resp to ^Q to prevent error message. * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special instruction sequence at end to make restore_pc_queue happy.	32 years ago
Stu Grossman	f8f3659f3e	* cpu32bug-rom.c monitor.h op50-rom.c remote-est.c rom68k-rom.c w89k-rom.c: Remove loadtypes, loadprotos and baudrates. * op50-rom.c: Fix copyrights and add load routine to op50n_cmds. * rom68k-rom.c (_initialize_rom68k): Don't set baud rate. * w89k-rom.c: Fix copyrights.	32 years ago
Stu Grossman	5de0c6486d	* monitor.c: Move all xmodem stuff into xmodem.[ch]. Remove unnecessary remoteloadprotocol and remoteloadtype support. * (expect expect_prompt): Change names to monitor_expect and monitor_expect_prompt. Make them global. * (printf_monitor): Change name to monitor_printf. Make global. * (monitor_read_memory): Flush command echo to avoid parsing ambiguity with CPU32Bug monitor. * (monitor_load): Remove remoteloadprotocol and remoteloadtype support. Call target_ops->load_routine, default to monitor_load_srec. * (monitor_load_srec): Remove everything but S-record support. * monitor.h (monitor_ops): Add load_routine to provide monitor specific download capability. * remote-est.c: Clean up copyrights and comments. * w89k-rom.c: Use new xmodem support. * xmodem.c xmodem.h: New files to support xmodem downloads. * rom68k-rom.c remote-est.c: Fix copyrights, add load_routine entry to monitor_ops. * cpu32bug-rom.c: New file to support Moto BCC debuggers. * config/m68k/est.mt (TDEPFILES): Add cpu32bug.o. * config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.	32 years ago
Stan Shebs	d108166fde	* monitor.h (init_monitor_ops): Declare. * rom68k-rom.c: Clarify some comments. (rom68k_open): Define as static, to match decl.	32 years ago
Stu Grossman	3da4297eae	* monitor.h: Add MO_GETMEM_NEEDS_RANGE flag. * monitor.c (monitor_read_memory): Use previously mentioned flag to send proper format memory examine commands to the w89k monitor. Also, try to handle bizarre format of memory dump... * op50-rom.c w89k-rom.c: Update to new monitor.[ch] conventions.	32 years ago
Stu Grossman	a706069fdb	start-sanitize-gdbtk * Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate locations (per-host) for X11 include files. * config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs of the R5 include files. end-sanitize-gdbtk * monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of support for interrupting target. * monitor.c (monitor_open): Send stop command before doing anything else. * (monitor_load_srec): Fix record size calculation to prevent end of segment from getting trashed. * rom68k-rom.c: Update to latest version of struct monitor_ops. * config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order problems. Makes DOS hosted function calling work. * sparclite/crt0.s: Define _start to make COFF happy. * testsuite/config/rom68k.exp (gdb_target_rom68k): Use $targetname, $serialport and $baud instead of hardwired variables. * testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the target doesn't support signals.	32 years ago
Stu Grossman	a25a9f49ca	* configure.in: Move test for m68-est- before m68--coff. findvar.c: Move default def of CANNOT_STORE_REGISTER closer to the beginning of the code. * (write_register_gen): New routine. Analogous to read_register_gen. * (write_register_bytes): Another rewrite! Make it smarter about not updating regs with the same value. * monitor.c (printf_monitor readchar): Use stderr instead of stdout to output debug info. Also cleanup readchar a little. * (expect): Make sure that excessive responses are null terminated. * (monitor_open): Check for magic number in monitor_ops struct. Allow multiple commands as init strings. Also, clear all breakpoints. * (monitor_resume monitor_wait): Send a command to dump all the regs for those targets which don't do so when waking up after a continue command. * (monitor_wait): Handle excessive response output better. * (monitor_write_memory): Use block fill, word, and long word commands (if they exist) to write memory more efficiently. * General cleanups to use flag bits instead of individual flag words in monitor_ops struct. * (monitor_command): Return output from command. * (monitor_load_srec): Allocate buffer only once. Use alloca. Wait for load response string instead of using a timeout to start sending S-records. Fix bug where value of srec_frame shrinks. If hashmark is set, print `-' for retransmissions. General cleanups. * (monitor_make_srec): Get rid of S-record default type kludge. * monitor.h: Use seperate struct for memory and register read/write commands. Memory commands can come in byte, word, long, and longlong forms. * (monitor_ops): Change lots of fields. Generalize some stuff. Put all flags into flags word. Allow init to be a list of commands. Add command for clearing all breakpoints, block fill, dumping all registers. * remote-est.c: Rewrite to use new monitor conventions. * config/m68k/est.mt (TDEPFILES): Add monitor.o. * config/m68k/tm-est.h: Set NUM_REGS to 18. * testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test more thoroughly.	32 years ago
Stu Grossman	2081365ffa	* findvar.c (read_register_bytes write_register_bytes): Make these routines much smarter about updating registers from the target, only doing so when absolutely necessary. This really speeds up register modification on some remote targets. * monitor.c: More cleanups. Get rid of monitor_load_ascii_srec. BFD makes this unnecessary. Lots of debugging speedups. * (expect): NULL terminate return string. * (monitor_open monitor_supply_register parse_register_dump monitor_wait monitor_fetch_register): Switch to using GNU regexp library to parse multi-register displays. * (monitor_read_memory): Read multiple bytes (up to 16) at once. * (monitor_create_inferior): Call clear_proceed_status to make run command notice first breakpoint. * (monitor_load): Clean up. Reset inferior_pid, set pc to start address and reset symbol table stuff to make loads put things into a fresh state. * (monitor_load_srec): Lower sleep time to 1 second. * monitor.h (struct monitor_ops): Add register_pattern and supply_register to monitor_ops. * rom68k-rom.c: Add new support for handling register dumps.	32 years ago
Stu Grossman	32fa4b5936	* monitor.c array-rom.c monitor.h rom68k-rom.c: Move target_ops into monitor.c. * monitor.c (monitor_create_inferior): Allow run command to start program.	32 years ago
Stu Grossman	f17aed8ba3	* monitor.c (monitor_load): Set PC to start address when done loading. * array-rom.c monitor.h rom68k-rom.c: Clean up target_ops. Remove ref to monitor_create_inferior.	32 years ago
Stu Grossman	1265e2d823	* Makefile.in: Add rules for monitor.o and rom68k-rom.o to make Sun make (with VPATH) work... * monitor.c monitor.h rom68k-rom.c: Serious cleanup to make IDP (rom68k) target work right. * array-rom.c op50-rom.c w89k-rom.c: Partial updates to new monitor.c interface. More work needs to be done here. * config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no floating-point for this card.	32 years ago
Rob Savoye	0b0669febd	Add GDBPROTO macro for checking the type of protocol.	32 years ago
Rob Savoye	cf51c6017e	* monitor.[ch], op50-rom.c, rom68k-rom.c, w89k-rom.c: Add support to monitor config structure for supported baud rates for a target and variable stop bits. * monitor.c (monitor_fetch_register): Store register values in big endian format on any host.	32 years ago
Rob Savoye	b3b8d9bfa7	* op50-rom.c, w89k-rom.c, monitor.c: Modify to use two variables to set remote load type and protocol. * rom68k-rom.c: Add to_stop in target_ops.	32 years ago
Rob Savoye	df3cf84a35	* monitor.h, remote-mon.c: Hack up to so the old ROM monitor interface code still works with the new ROM monitor structures. Fake out a couple of fields.	32 years ago

1 2

54 Commits (cc7ad3eab346356ca03eab6d987401d12fbffd45)