binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Alan Modra	d4f5b5e214	objdump -S test fail on mingw FAIL: objdump -S FAIL: objdump --source-comment is seen on mingw for the simple reason that gcc adds a .exe suffix on the output file if not already present. Fix that, and tidy some objcopy tests. * testsuite/lib/binutils-common.exp (exeext): New proc. * testsuite/binutils-all/objcopy.exp (exe, test_prog): Use it here. (objcopy_remove_relocations_from_executable): Catch objcopy errors. Only run on ELF targets. * testsuite/binutils-all/objdump.exp (exe): Set variable. (test_build_id_debuglink, test_objdump_S): Use exe file suffix.	5 years ago
Alan Modra	985e026451	PR27725, better objcopy -p times Nanosecond rather than second resolution. PR 27725 * configure.ac: Check for sys/time.h and utimensat. Use standard checks for mkstemp and mkdtemp. Whitespace. Check for nanosecond members of struct stat. * rename.c: Prefer sys/time.h for utimes over utime.h for utime. (STAT_TIMESPEC, STAT_TIMESPEC_NS): Define (get_stat_atime_ns, get_stat_mtime_ns): New inline functions. (get_stat_atime, get_stat_mtime): Likewise. (set_times): Choose first available of utimensat, utimes, utime. Use above inline functions to set timespec and timeval values. * configure: Regenerate. * config.in: Regenerate. * testsuite/binutils-all/objcopy.exp (objcopy_test): Add test of file timestamp when --preserve-dates is used.	5 years ago
Alan Modra	17e04eff81	binutils testsuite: replace unresolved with unsupported You'd think "unresolved" would be correct for an objcopy test when the assembler refuses to assemble one of our source files. After all, the test of objcopy hasn't been run. However, "unresolved" results in runtest returning with an error status. If instead we report "unsupported", runtest returns success. Which is a little less confusing to a user who doesn't see any errors reported unless they look in log files. * testsuite/binutils-all/objcopy.exp: Report "unsupported" when gas or ld fails to build a testcase rather than "unresolved". Report "fail" when readelf returns an error status rather than "unresolved". * testsuite/binutils-all/ar.exp: Likewise. * testsuite/binutils-all/compress.exp: Likewise. * testsuite/binutils-all/readelf.exp: Likewise.	5 years ago
Alan Modra	250d07de5c	Update year range in copyright notice of binutils files	5 years ago
H.J. Lu	64ec7c3f80	binutils: Report error message on error * testsuite/binutils-all/objcopy.exp (objcopy_test): Report error message on error.	6 years ago
H.J. Lu	790147a9e9	Pass --disable-reloc-section on PE targets for PR 25662 test Pass --disable-reloc-section on PE targets for PR 25662 test since commit `514b4e191d` Author: Jeremy Drake <sourceware-bugzilla@jdrake.com> Date: Thu Aug 27 12:58:27 2020 +0100 Change the default characteristics of DLLs built by the linker to more secure settings. defaulted to --enable-reloc-section. PR ld/26587 * testsuite/binutils-all/objcopy.exp: Pass --disable-reloc-section to ld on PE targets for PR 25662 test.	6 years ago
John David Anglin	9e7ed8b080	Fix PR binutils/26356 on hppa--hpux. PR 26356 som.c (som_bfd_copy_private_section_data): Issue error when a subspace is specified without its containing space. * testsuite/binutils-all/objcopy.exp (objcopy --reverse-bytes): Add "-j $PRIVATE$" to command on hppa--hpux. testsuite/lib/utils-lib.exp (default_binutils_run): Remove existing dollar-sign quotes before quoting. Do this prior to generating log output.	6 years ago
Alan Modra	efd0ed580e	XCOFF binutils testsuite fix Avoid an UNRESOLVED test due to "Error: the XCOFF file format does not support arbitrary sections". * testsuite/lib/binutils-common.exp (is_xcoff_format): New. * testsuite/binutils-all/objcopy.exp (pr25662): Exclude xcoff.	6 years ago
Stephen Casner	8eca5c7d9f	Fix unresolved test in binutils for pdp11. * binutils/testsuite/binutils-all/pr25662-pdp11.s: Alternate source file for test using section pseudo-ops compatible with pdp11. * binutils/testsuite/binutils-all/objcopy.exp: Select alternate source.	6 years ago
Nick Clifton	00386881a3	Fix objcopy's --preserve-dates command line option so that it will work with PE format files. PR binutils/pr25662 bfd * libcoff-in.h (struct pe_tdata): Rename the insert_timestamp field to timestamp and make it an integer. * libcoff.h: Regenerate. * peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Test the timestamp field in the pe_data structure rather than the insert_timestamp field. binutils* objcopy.c (copy_object): When copying PE format files set the timestamp field in the pe_data structure if the preserve_dates flag is set. * testsuite/binutils-all/objcopy.exp (objcopy_test) Use --preserve-dates in place of the -p option, in order to make its effect more obvious. ld * emultempl/pe.em (after_open): Replace initialisation of the insert_timestamp field in the pe_data structure with an initialisation of the timestamp field. * emultemp/pep.em: Likewise. * pe-dll.c (fill_edata): Use the timestamp field in the pe_data structure instead of the insert_timestamp field.	6 years ago
Alan Modra	0a6a8b596b	Re: Adjust objcopy_test Last patch didn't manage to xfail spu due to clear_xfail --elf. Clearing --elf dates back to a time when we had rather a lot more setup_xfail patterns, so limiting it to hppa--elf. Also, mips--irix ought to have been mips--irix* and I'm having second thoughts about xfailing mips and hiding what looks like a problem: If the mips target is supposed to emit names for local section symbols and does so for objcopy, why isn't it doing the same for ld? Also, lots more mips targets would be subject to this test failing. So I'm backing out those xfails and leaving it to someone more knowledgeable about mips. * testsuite/binutils-all/objcopy.exp (objcopy_test): Only clear_xfail hppa--elf. Revert mips xfails.	6 years ago
Alan Modra	6a81c59be7	Adjust objcopy_test xfails spu due to a note section getting a different vma, and some mips targets that give section symbols a name string. I added -p for the executable test in an attempt to fix all the pe target fails, but that doesn't preserve the date/time for some reason. * testsuite/binutils-all/objcopy.exp (objcopy_test): Move xfails from here to calls. Remove "m8--*" entry. Don't xfail tic54x but do xfail spu, mipstx39 and mips-sgi-irix for the executable test. Pass "-p" to objcopy for the executable test.	6 years ago
Jozef Lawrynowicz	1fafefd594	Add testcase for PR 25662 invalid sh_offset for section binutils/ChangeLog: 2020-03-27 Jozef Lawrynowicz <jozef.l@mittosystems.com> PR binutils/25662 * testsuite/binutils-all/objcopy.exp (objcopy_test): Add argument to specify whether an object file or executable should be built and tested. Change test names to report whether an object file or executable is being tested. * testsuite/binutils-all/pr25662.ld: New test. * testsuite/binutils-all/pr25662.s: New test.	6 years ago
Alan Modra	b3adc24a07	Update year range in copyright notice of binutils files	6 years ago
Alan Modra	5b660084e2	Remove tic80 support This is one way of fixing ubsan bug reports, just delete the code. The assembler support was removed back in 2005 along with other non-BFD assemblers, but somehow the remainder of the port stayed in. bfd/ * coff-tic80.c: Delete file. * cpu-tic80.c: Delete file. * archures.c: Remove tic80 support. * coffcode.h: Likewise. * coffswap.h: Likewise. * targets.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * Makefile.am: Likewise. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove tic80 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * doc/as.texi: Remove mention of tic80. include/ * coff/tic80.h: Delete file. * opcode/tic80.h: Delete file. ld/ * emulparams/tic80coff.sh: Delete file. * scripttempl/tic80coff.sc: Delete file. * configure.tgt: Remove tic80 support. * Makefile.am: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. opcodes/ * tic80-dis.c: Delete file. * tic80-opc.c: Delete file. * disassemble.c: Remove tic80 support. * disassemble.h: Likewise. * Makefile.am: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.	6 years ago
Fāng-ruì Sòng	64f52b3ec1	Implement objcopy/strip --keep-section=<sectionpattern> llvm-objcopy and llvm-strip support an option --keep-section that keeps some sections from being removed. * objcopy.c (enum option_values): Add OPTION_KEEP_SECTION. (SECTION_CONTEXT_KEEP): Define. Adjust other SECTION_CONTEXT macros. (copy_usage): Describe --keep-section. (strip_usage): Likewise. (copy_main): Handle SECTION_CONTEXT_KEEP. (strip_main): Likewise. (is_strip_section_1): Likewise. * testsuite/binutils-all/objcopy.exp: Add tests. * testsuite/binutils-all/keep-section-1.d: New test driver file. * testsuite/binutils-all/keep-section-2.d: Likewise. * doc/binutils.texi: Document the new feature. * NEWS: Mention the new feature.	7 years ago
Nick Clifton	5c49f2cd78	Improve objcopy's note mergeing capabilities. * objcopy.c (struct merged_note_section): New structure. Used to chain together details of mergeable note sections. (is_merged_note_section): Rename to is_megreable_note_section and return true for note sections that use GNU_BUILD_ATTRS_SECTION_NAME as a prefix. (num_bytes): Delete (objcoopy_internal_note): Add padded_namesz field. (DEBUG_MERGE): New macro. Set to non-zero to enable debugging of the note merging code. (gap_exists): Rename to overlaps_or_adjoins and return TRUE for overlapping notes or adjoining notes. (contained_by, is_deleted_note, is_version_note) (compare_gnu_build_notes, sort_gnu_build_notes): New functions. (merge_gnu_build_notes): Rework. Sort notes into a mergeable order first. Merge them. Then sort them into an ascending address order before writing them out. (copy_object): Handle more than one mergeable note section. * testsuite/binutils-all/note-2-32.d: Update for new merging behaviour. * testsuite/binutils-all/note-2-32.s: Likewise. * testsuite/binutils-all/note-2-64.d: Likewise. * testsuite/binutils-all/note-2-64.s: Likewise. * testsuite/binutils-all/note-3-32.d: Likewise. * testsuite/binutils-all/note-3-32.s: Likewise. * testsuite/binutils-all/note-3-64.d: Likewise. * testsuite/binutils-all/note-3-64.s: Likewise. * testsuite/binutils-all/note-4-32.d: Likewise. * testsuite/binutils-all/note-4-32.s: Likewise. * testsuite/binutils-all/note-4-64.d: Likewise. * testsuite/binutils-all/note-4-64.s: Likewise. * testsuite/binutils-all/note-6-32.s: New test source file. * testsuite/binutils-all/note-6-64.s: New test source file. * testsuite/binutils-all/note-6-32.d: New test driver file. * testsuite/binutils-all/note-6-64.d: New test driver file. * testsuite/binutils-all/objcopy.exp: Run the new test.	7 years ago
Nick Clifton	de4859eacb	Change objcopy's --set-section-alignment option to take a byte alignment value rather than a power of two alignment value. PR 24942 * objcopy.c (copy_usage): Update description of --set-section-alignment. (copy_main): Interpret numeric argument of --set-section-alignment as a byte alignment, not a power of two alignment. * doc/binutils.texi: Update description of --set-section-alignment. * testsuite/binutils-all/set-section-alignment.d: New test. * testsuite/binutils-all/objcopy.exp: Run the new test.	7 years ago
Alan Modra	acea835faa	binutils testsuite test for ELF32 vs ELF64 * testsuite/binutils-all/objcopy.exp (elf64): Correct object file used to set this variable.	7 years ago
Jamey Hicks	37d0d09177	Add new option to objcopy: --verilog-data-width. Use this option to set the size of byte bundles generated in verilog format files. PR 19921 binutils* objcopy.c: Add new option --verilog-data-width. Use it to set the value of VerilogDataWidth. * doc/binutils.texi: Document the new option. * testsuite/binutils-all/objcopy.exp: Run tests of new option. * testsuite/binutils-all/verilog-1.hex: New file. * testsuite/binutils-all/verilog-2.hex: New file. * testsuite/binutils-all/verilog-4.hex: New file. * testsuite/binutils-all/verilog-8.hex: New file. * NEWS: Mention the new feature. bfd * verilog.c: (VerilogDataWidth): New variable. (verilog_write_record): Emit bytes in VerilogDataWidth bundles.	7 years ago
Tamar Christina	e3ecd63133	Add testcase for PR/24065. This adds a new testcase for objcopy -O ihex to test that it correctly works. binutils/ChangeLog: PR 24065 * testsuite/binutils-all/copy-6.d: New test. * testsuite/binutils-all/objcopy.exp: Use it.	7 years ago
Alan Modra	827041555a	Update year range in copyright notice of binutils files	7 years ago
Masatake Yamato	d3def5d73e	Enhance objdump's --disassemble switch so that it can now take an optional parameter, specifying the starting symbol for disassembly. Disassembly will continue from this symbol up to the next symbol. * objdump.c (long_options): Have the --disassemble option take an optional argument. (usage): Add description for the `symbol' argument to the --disassemble option. (disasm_sym): New file private variable. (struct objdump_disasm_info): New field `symbol'. (disassemble_section): Introduce `do_print' local variable to control whether objdump displays the result of disassembling for a symbol or not. (main): Set `symbol' file private variable if the option argument for the --disassemble option is given. * doc/binutils.texi (objdump): Add description for the option argument. * NEWS: Mention the new feature. * testsuite/binutils-all/objdump.exp: Add tests of the -d and --disassemble=<symbol> options. * testsuite/binutils-all/bintest.s: Add more symbols and code. * testsuite/binutils-all/readelf.s: Update expected output. * testsuite/binutils-all/readelf.ss-64: Likewise. * testsuite/binutils-all/readelf.ss-mips: Likewise. * testsuite/binutils-all/readelf.ss-tmips: Likewise.	8 years ago
Nick Clifton	de564eb5cc	Prevent the --keep-global-symbol and --globalize-symbol options from being used together. This is the result of an email thread starting here: https://sourceware.org/ml/binutils/2018-09/msg00031.html The main point of the thread is this observation: * Supposing we had an object file with two globals, SomeGlobal and SomeOtherGlobal, if one were to do "--globalize-symbol SomeGlobal --keep-global-symbol SomeOtherGlobal", you might expect that both SomeGlobal and SomeOtherGlobal are global in the output file... but it isn't. Because --keep-global-symbol is set and doesn't include SomeGlobal, SomeGlobal will be demoted to a local symbol. And because the check to see if we should apply the --globalize-symbol flag checks "flags" (the original flag set), and not "sym->flags", it decides not to do anything, so SomeGlobal remains a local symbol. Although this is a weird edge case, should this be changed so that --keep-global-symbol implicitly keeps anything also specified via --globalize-symbol? (The code seems technically correct with respect to the documentation, but IMO the behavior is counter-intuitive). binutils* objcopy.c (copy_main): Issue a fata error if the --keep-global-symbol(s) and the --globalize-symbol(s) options are used together. * doc/binutils.texi: Document that the two options are incompatible. * testsuite/binutils-all/copy-5.d: New test. * testsuite/binutils-all/objcopy.exp: Run the new test.	8 years ago
Nick Clifton	fbaf61ad52	Andes Technology has good news for you, we plan to update the nds32 port of binutils on upstream! We have not only removed all unsupported and obsolete code, but also supported lost of new features, including better link-time relaxations and TLS implementations. Besides, the files generated by the newly assembler and linker usually get higher performance and more optimized code size. ld * emultempl/nds32elf.em (hyper_relax): New variable. (nds32_elf_create_output_section_statements): the parameters of bfd_elf32_nds32_set_target_option (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax. * emultempl/nds32elf.em (nds32_elf_after_open): Updated. * emultempl/nds32elf.em (tls_desc_trampoline): New variable. * (nds32_elf_create_output_section_statements): Updated. * (nds32_elf_after_parse): Disable relaxations when PIC is enable. * (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline. include * elf/nds32.h: Remove the unused target features. * dis-asm.h (disassemble_init_nds32): Declared. * elf/nds32.h (E_NDS32_NULL): Removed. (E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New. * opcode/nds32.h: Ident. (N32_SUB6, INSN_LW): New macros. (enum n32_opcodes): Updated. * elf/nds32.h: Doc fixes. * elf/nds32.h: Add R_NDS32_LSI. * elf/nds32.h: Add new relocations for TLS. gas * config/tc-nds32.c: Remove the unused target features. (nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp, nds32_set_elf_flags_by_insn, nds32_insert_relax_entry, nds32_apply_fix): Likewise. (nds32_no_ex9_begin): Removed. * config/tc-nds32.c (add_mapping_symbol_for_align, make_mapping_symbol, add_mapping_symbol): New functions. * config/tc-nds32.h (enum mstate): New. (nds32_segment_info_type): Likewise. * configure.ac (--enable-dsp-ext, --enable-zol-ext): New options. * config.in: Regenerated. * configure: Regenerated. * config/tc-nds32.c (nds32_dx_regs): Set the value according to the configuration. (nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext): Likewise. (nds32_dsp_ext): New variable. Set the value according to the configuration. (nds32_zol_ext): Likewise. (asm_desc, nds32_pseudo_opcode_table): Make them static. (nds32_set_elf_flags_by_insn): Updated. (nds32_check_insn_available): Updated. (nds32_str_tolower): New function. * config/tc-nds32.c (relax_table): Updated. (md_begin): Updated. (md_assemble): Use XNEW macro to allocate space for `insn.info', and then remember to free it. (md_section_align): Cast (-1) to ValueT. (nds32_get_align): Cast (~0U) to addressT. (nds32_relax_branch_instructions): Updated. (md_convert_frag): Add new local variable `final_r_type'. (invalid_prev_frag): Add new bfd_boolean parameter `relax'. All callers changed. * config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field. (struct nds32_hint_map): Add `option_list' field. (struct suffix_name, suffix_table): Remove the unused `pic' field. (do_pseudo_b, do_pseudo_bal): Remove the suffix checking. (do_pseudo_la_internal, do_pseudo_pushpopm): Indent. (relax_hint_bias, relax_hint_id_current): New static variables. (reset_bias, relax_hint_begin): New variables. (nds_itoa): New function. (CLEAN_REG, GET_OPCODE): New macros. (struct relax_hint_id): New. (nds32_relax_hint): For .relax_hint directive, we can use `begin' and `end' to mark the relax pattern without giving exactly id number. (nds32_elf_append_relax_relocs): Handle the case that the .relax_hint directives are attached to pseudo instruction. (nds32_elf_save_pseudo_pattern): Change the second parameter from instruction's opcode to byte code. (nds32_elf_build_relax_relation): Add new bfd_boolean parameter `pseudo_hint'. (nds32_lookup_pseudo_opcode): Fix the overflow issue. (enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT. (nds32_elf_record_fixup_exp, relax_ls_table, hint_map, nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name): Updated. * config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6. (enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and NDS32_RELAX_HINT_LA_GOTOFF. * config/tc-nds32.h (relax_ls_table): Add floating load/store to gp relax pattern. (hint_map, nds32_find_reloc_table): Likewise. * configure.ac: Define NDS32_LINUX_TOOLCHAIN. * configure: Regenerated. * config.in: Regenerated. * config/tc-nds32.h (enum nds32_ramp): Updated. (enum nds32_relax_hint_type): Likewise. * config/tc-nds32.c: Include "errno.h" and "limits.h". (relax_ls_table): Add TLS relax patterns. (nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on each instructions of TLS patterns. (nds32_elf_record_fixup_exp): Updated. (nds32_apply_fix): Likewise. (suffix_table): Add TLSDESC suffix. binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number from 215 to 255 for NDS32. bfd * elf32-nds32.c (nds32_elf_relax_loadstore): Remove the unused target features. (bfd_elf32_nds32_set_target_option): Remove the unused parameters. (nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12, nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls, nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff nds32_elf_relax_gotoff_suff, calculate_plt_memory_address, calculate_plt_offset, calculate_got_memory_address, nds32_elf_check_dup_relocs): Removed. All callers changed. * elf32-nds32.h: Remove the unused macros and defines. (elf_nds32_link_hash_table): Remove the unused variable. (bfd_elf32_nds32_set_target_option): Update prototype. (nds32_elf_ex9_init): Removed. * elf32-nds32.c (nds32_convert_32_to_16): Updated. * elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros to initialize array nds32_elf_howto_table in any order without lots of EMPTY_HOWTO. (nds32_reloc_map): Updated. * reloc.c: Add BFD_RELOC_NDS32_LSI. * bfd-in2.h: Regenerated. * bfd/libbfd.h: Regenerated. * elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI. (nds32_reloc_map): Likewise. (nds32_elf_relax_flsi): New function. (nds32_elf_relax_section): Support floating load/store relaxation. * elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset): New macro. (struct elf_nds32_link_hash_entry): New `offset_to_gp' field. (struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields. (elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard, nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym): New functions. (nds32_info_to_howto_rel): Add BFD_ASSERT. (bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc, nds32_elf_link_hash_table_create, nds32_elf_relocate_section, nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label, bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated. (nds32_elf_final_sda_base): Improve it to find the better gp value. (insert_nds32_elf_blank): Must consider `len' when inserting blanks. * elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype. (struct elf_nds32_link_hash_table): Add new variable `hyper_relax'. * elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function. (create_got_section): Likewise. (allocate_dynrelocs, nds32_elf_size_dynamic_sections, nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated. (nds32_elf_check_relocs): Fix the issue that the shared library may has TEXTREL entry in the dynamic section. (nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs since the TEXTREL issue is fixed in the nds32_elf_check_relocs. (nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ dynamic entry. (calculate_offset): Remove the unused parameter `pic_ext_target' and related codes. All callers changed. (elf_backend_dtrel_excludes_plt): Disable it temporarily since it will cause some errors for our test cases. * elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the generic object. * reloc.c: Add TLS relocations. * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * elf32-nds32.h (struct section_id_list_t): New. (elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New prototypes. (elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent): New macro. (nds32_insertion_sort, bfd_elf32_nds32_set_target_option, elf_nds32_link_hash_table): Updated. * elf32-nds32.c (enum elf_nds32_tls_type): New. (struct elf32_nds32_relax_group_t, struct relax_group_list_t): New. (elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type, fls, ones32, list_insert, list_insert_sibling, dump_chain, elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions. (elf_nds32_obj_tdata): Add new fields. (elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros. (nds32_elf_howto_table): Add TLS relocations. (nds32_reloc_map): Likewise. (nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections, nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info, nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option, nds32_elf_check_relocs, allocate_dynrelocs): Updated. (nds32_elf_relax_section): Call nds32_elf_unify_tls_model. (dtpoff_base): Rename it to `gottpof' and then update it. opcodes * nds32-asm.c (operand_fields): Remove the unused fields. (nds32_opcodes): Remove the unused instructions. * nds32-dis.c (nds32_ex9_info): Removed. (nds32_parse_opcode): Updated. (print_insn_nds32): Likewise. * nds32-asm.c (config.h, stdlib.h, string.h): New includes. (LEX_SET_FIELD, LEX_GET_FIELD): Update defines. (nds32_asm_init, build_operand_hash_table, build_keyword_hash_table, build_opcode_hash_table): New functions. (nds32_keyword_table, nds32_keyword_count_table, nds32_field_table, nds32_opcode_table): New. (hw_ktabs): Declare it to a pointer rather than an array. (build_hash_table): Removed. * nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT, SYN_ROPT and upadte HW_GPR and HW_INT. * nds32-dis.c (keywords): Remove const. (match_field): New function. (nds32_parse_opcode): Updated. * disassemble.c (disassemble_init_for_target): Add disassemble_init_nds32. * nds32-dis.c (eum map_type): New. (nds32_private_data): Likewise. (get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid, nds32_add_opcode_hash_table, disassemble_init_nds32): New functions. (print_insn_nds32): Updated. * nds32-asm.c (parse_aext_reg): Add new parameter. (parse_re, parse_re2, parse_aext_reg): Only reduced registers are allowed to use. All callers changed. * nds32-asm.c (keyword_usr, keyword_sr): Updated. (operand_fields): Add new fields. (nds32_opcodes): Add new instructions. (keyword_aridxi_mx): New keyword. * nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX and NASM_ATTR_ZOL. (ALU2_1, ALU2_2, ALU2_3): New macros. * nds32-dis.c (nds32_filter_unknown_insn): Updated.	8 years ago
Nick Clifton	a0a8a9340d	Ensure that binutils test names are unique. binutils* testsuite/binutils-all/compress.exp: Rename second "objcopy zlib-gnu compress debug sections 3" test to "objcopy zlib-gabi compress debug sections 3" and use gabi object files instead of gnu object files. * testsuite/binutils-all/objcopy.exp: Add suffix to the names of the "ELF group" tests. * testsuite/binutils-all/readelf.exp (proc readelf_find_size): Add an iteration parameter and include it in the name of the test. Update callers to include an iteration count. gas * testuite/gas/elf/group0a.d: Add extra details to the test name. * testuite/gas/elf/group0b.d: Likewise. * testuite/gas/elf/group1a.d: Likewise. * testuite/gas/elf/group1b.d: Likewise. * testuite/gas/elf/group0b.d: Likewise. * testuite/gas/elf/section9.d: Likewise. * testuite/gas/i386/ilp32/lns/lns-common-1.d: Likewise. * testuite/gas/i386/ilp32/lns/lns-duplicate-1.d: Likewise. ld * testuite/ld/ld-elf/audit.exp: Differentiate the names of the two "Run with shared with --audit" tests. * testuite/ld/ld-elf/compress.exp: Differentiate the zlib compressed debug output test names. * testuite/ld/ld-i386/tlspie1.d: Add extra details to the test name. * testuite/ld/ld-i386/tlspie2.d: Likewise. * testuite/ld/ld-size/size.exp: Add missing escapes to the end of lines in the size-3e test. * testuite/ld/ld-unique/unique.exp: Differentiate the names of the two "Checking unique PIC object" tests. * testuite/ld/ld-x86-64/tlspie1.d: Add extra details to the test name.	8 years ago
H.J. Lu	319dbdfbb7	Add a testcase for PR binutils/23633 PR binutils/23633 * testsuite/binutils-all/objcopy.exp: Run pr23633. * testsuite/binutils-all/pr23633.d: New file. * testsuite/binutils-all/pr23633.list: Likewise. * testsuite/binutils-all/pr23633.s: Likewise.	8 years ago
Alan Modra	f9853190c8	PR23611, objcopy is not removing executable relocatable sections BFD handles ELF relocation sections in an executable differently to relocation sections in a relocatable object. For a relocatable object, BFD carries the relocations as data associated with the section to which they apply; The relocation section doesn't appear as a separate section. For an executable, dynamic relocation sections do appear as separate sections. This means that objcopy needs to use different strategies when dealing with relocations. When --remove-relocations was added to objcopy with commit `d3e5f6c8f1`, objcopy lost the ability to remove dynamic relocation sections such as .rela.plt from executables using the option "--remove-section=.rela.plt". This patch reinstates that functionality. I thought it best to keep --remove-relocations as is, rather than extending to handle dynamic relocations as per the patch in the PR, because executables linked with --emit-relocs may have both dynamic and non-dynamic relocations. In that case --remove-relocataions=* is useful to remove all the non-dynamic relocations. PR binutils/23611 * objcopy.c (handle_remove_section_option): Consider .rela and .rel sections for stripping directly as well as attached to the associated section they relocate. * doc/binutils.texi (remove-relocations): Specify that this option removes non-dynamic relocation sections. * testsuite/binutils-all/objcopy.exp (objcopy_remove_relocations_from_executable): New test.	8 years ago
H.J. Lu	7dd36a6f1c	Prune BFD warnings for unknown GNU properties When glibc is enabled with the new GNU_PROPERTY_X86_XXX bits: https://groups.google.com/forum/#!topic/x86-64-abi/-D05GQ3kWrA BFD will issue an unknown GNU property warning like warning: tmpdir/ld1: unsupported GNU_PROPERTY_TYPE (5) type: 0xc0010001 and ignore such GNU properties. This patch adds prune_warnings_extra to prune such warnings on release branches and updates prune_warnings to call prune_warnings_extra. binutils/ PR ld/23536 * Makefile.am (development.exp): New target. (EXTRA_DEJAGNU_SITE_CONFIG): New. (DISTCLEANFILES): Add development.exp. * Makefile.in: Regenerated. * testsuite/binutils-all/objcopy.exp (strip_test): Call prune_warnings to prune BFD output. (strip_test_with_saving_a_symbol): Likewise. (objcopy_test_without_global_symbol): Likewise. * testsuite/lib/binutils-common.exp (prune_warnings_extra): New proc. (prune_warnings): Likewise. gas/ PR ld/23536 * Makefile.am (development.exp): New target. (EXTRA_DEJAGNU_SITE_CONFIG): New. (DISTCLEANFILES): Add development.exp. * Makefile.in: Regenerated. ld/ PR ld/23536 * Makefile.am (development.exp): New target. (EXTRA_DEJAGNU_SITE_CONFIG): New. (DISTCLEANFILES): Add development.exp. * Makefile.in: Regenerated. * testsuite/ld-bootstrap/bootstrap.exp: Call prune_warnings to prune BFD output. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/lib/ld-lib.exp (prune_warnings): Removed. * testsuite/ld-elf/shared.exp: Allow "\n" in linker warnings.	8 years ago
Alan Modra	506b86a4f5	binutils testsuite strip-13 test The strip-13 test runs into difficulty using dc.a on some targets. dc.a writes a power of 2 number of bytes large enough to contain a target address. On some targets, eg. avr-elf, this can be 2 bytes but the ELF format used require words of 4 bytes to make up a relocation entry. There was a hack in the test, duplicating the reloc type into what is normally the addend to make the test work when little-endian, but that hack fails for similar big-endian targets. This patch fixes that problem by arranging to emit 32-bit and 64-bit ELF relocs using .4byte and .8byte directives, chosen as appropriate for the ELF size. I've also bumped the reloc number tested to a higher unused value, and made the number more easily parameterised by target should that be necessary in the future. Whether REL or RELA relocs are used is now chosen by a new is_rela readelf test of an object file, rather than by lists of targets. * testsuite/lib/binutils-common.exp (is_elf64): Use directory of input file for readelf.out. (is_rela): New proc. * testsuite/binutils-all/objcopy.exp (elf64): Set new variable from first result of is_elf64 test. (reloc_format): Set using is_rela. (strip-13): Pass RELOC and ELF64 to assembler. (strip-14, strip-15): Use elf64 rather than calling is_elf64 again. * testsuite/binutils-all/strip-13.d: Run for more targets. * testsuite/binutils-all/strip-13mips64.s: Use RELOC and set addend to zero. * testsuite/binutils-all/strip-13rel.s: Use RELOC and ELF64. Don't add _NONE reloc. * testsuite/binutils-all/strip-13rela.s: Likewise.	8 years ago
Alan Modra	679ca9753b	Recognize more targets as ELF for testing Also use the correct rel strip-13 variant for more ARM targets. * testsuite/lib/binutils-common.exp (is_elf_format): Add chorus, cloudabi, fuchsia, kaos and nto. Merge netbsdelf* into elf, and uclinux into linux. * testsuite/binutils-all/objcopy.exp: Accept armeb for rel strip-13 test, exclude arm-vxworks and arm-windiss.	8 years ago
Nick Clifton	0df8ad28f0	Extend the assembler so that it can automatically generate GNU Build attribute notes if none are present in the input files. gas * as.c (flag_generate_build_notes): New variable. (show_usage): Add entry for --generate-missing-build-notes. (parse_args): Parse --generate-missing-build-notes. * as.h: Export flag_generate_build_notes. * symbols.c (save_symbol_name): Ensure that the name parameter is not NULL. * write.c (create_obj_attrs_section): Reformat. (create_note_reloc): New function - creates a relocation for a field in a GNU Build attribute note. (maybe_generate_build_notes): New function - created GNU Build attribute notes if none are present in the output file. (write_object_file): Call maybe_generate_build_notes. * configure.ac (--enable-generate-build-notes): New option. * NEWS: Announce the new feature. * doc/as.textinfo: Document the new option. * config.in: Regenerate. * configure: Regenerate. binutils* readelf.c (is_32bit_abs_reloc): Support R_PARISC_DIR32 as a 32-bit absolute reloc for the HPPA target. * testsuite/binutils-all/note-5.d: New test. * testsuite/binutils-all/note-5.s: Source file for new test. * testsuite/binutils-all/objcopy.exp: Run new test.	8 years ago
Christophe Lyon	f1ac0afe48	[ARM] FDPIC: Update testsuite so that many tests pass with arm-uclinuxfdpiceabi. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> binutils/ testsuite/binutils-all/elfedit-2.d: Accept arm--uclinuxfdpiceabi. * testsuite/binutils-all/elfedit-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/strip-3.d: Likewise. * testsuite/lib/binutils-common.exp: Likewise. ld/ * testsuite/ld-arm/export-class.exp: Accept arm--uclinuxfdpiceabi. * testsuite/ld-discard/discard.exp: Likewise. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/commonpage1.d: Likewise. * testsuite/ld-elf/compress1c.d: Likewise. * testsuite/ld-elf/compressed1b.d: Likewise. * testsuite/ld-elf/compressed1c.d: Likewise. * testsuite/ld-elf/compressed1e.d: Likewise. * testsuite/ld-elf/dynamic1.d: Likewise. * testsuite/ld-elf/dynsym1.d: Likewise. * testsuite/ld-elf/ehdr_start-missing.d: Likewise. * testsuite/ld-elf/ehdr_start-shared.d: Likewise. * testsuite/ld-elf/ehdr_start-userdef.d: Likewise. * testsuite/ld-elf/ehdr_start-weak.d: Likewise. * testsuite/ld-elf/ehdr_start.d: Likewise. * testsuite/ld-elf/exclude3b.d: Likewise. * testsuite/ld-elf/export-class.exp: Likewise. * testsuite/ld-elf/global1.d: Likewise. * testsuite/ld-elf/hash.d: Likewise. * testsuite/ld-elf/header.d: Likewise. * testsuite/ld-elf/loadaddr1.d: Likewise. * testsuite/ld-elf/loadaddr2.d: Likewise. * testsuite/ld-elf/loadaddr3a.d: Likewise. * testsuite/ld-elf/loadaddr3b.d: Likewise. * testsuite/ld-elf/local1.d: Likewise. * testsuite/ld-elf/maxpage1.d: Likewise. * testsuite/ld-elf/maxpage2.d: Likewise. * testsuite/ld-elf/maxpage3a.d: Likewise. * testsuite/ld-elf/mbind1a.d: Likewise. * testsuite/ld-elf/mbind1b.d: Likewise. * testsuite/ld-elf/mbind1c.d: Likewise. * testsuite/ld-elf/multibss1.d: Likewise. * testsuite/ld-elf/noload-2.d: Likewise. * testsuite/ld-elf/now-1.d: Likewise. * testsuite/ld-elf/now-2.d: Likewise. * testsuite/ld-elf/now-3.d: Likewise. * testsuite/ld-elf/now-4.d: Likewise. * testsuite/ld-elf/pie.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr16322.d: Likewise. * testsuite/ld-elf/pr16498a.d: Likewise. * testsuite/ld-elf/pr16498b.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr19162.d: Likewise. * testsuite/ld-elf/pr19539.d: Likewise. * testsuite/ld-elf/pr19617a.d: Likewise. * testsuite/ld-elf/pr19617b.d: Likewise. * testsuite/ld-elf/pr19617c.d: Likewise. * testsuite/ld-elf/pr19698.d: Likewise. * testsuite/ld-elf/pr19789.d: Likewise. * testsuite/ld-elf/pr20513c.d: Likewise. * testsuite/ld-elf/pr20513d.d: Likewise. * testsuite/ld-elf/pr21384.d: Likewise. * testsuite/ld-elf/pr21389a.d: Likewise. * testsuite/ld-elf/pr21389b.d: Likewise. * testsuite/ld-elf/pr21389c.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562e.d: Likewise. * testsuite/ld-elf/pr21562f.d: Likewise. * testsuite/ld-elf/pr21562g.d: Likewise. * testsuite/ld-elf/pr21562h.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr21903a.d: Likewise. * testsuite/ld-elf/pr21903b.d: Likewise. * testsuite/ld-elf/pr21903d.d: Likewise. * testsuite/ld-elf/pr22269a.d: Likewise. * testsuite/ld-elf/pr22269b.d: Likewise. * testsuite/ld-elf/pr22393-1a.d: Likewise. * testsuite/ld-elf/pr22393-1b.d: Likewise. * testsuite/ld-elf/pr22393-1c.d: Likewise. * testsuite/ld-elf/pr22393-1d.d: Likewise. * testsuite/ld-elf/pr22393-1e.d: Likewise. * testsuite/ld-elf/pr22393-1f.d: Likewise. * testsuite/ld-elf/pr22423.d: Likewise. * testsuite/ld-elf/rpath-1.d: Likewise. * testsuite/ld-elf/rpath-2.d: Likewise. * testsuite/ld-elf/runpath-1.d: Likewise. * testsuite/ld-elf/runpath-2.d: Likewise. * testsuite/ld-elf/seg.d: Likewise. * testsuite/ld-elf/sizeofb.d: Likewise. * testsuite/ld-elf/startofb.d: Likewise. * testsuite/ld-elf/strtab.d: Likewise. * testsuite/ld-elf/textaddr1.d: Likewise. * testsuite/ld-elf/textaddr2.d: Likewise. * testsuite/ld-elf/textaddr3.d: Likewise. * testsuite/ld-elf/textaddr4.d: Likewise. * testsuite/ld-elf/textaddr5.d: Likewise. * testsuite/ld-elf/textaddr6.d: Likewise. * testsuite/ld-elf/textaddr7.d: Likewise. * testsuite/ld-elf/tls.exp: Likewise. * testsuite/ld-elf/tls_common.exp: Likewise. * testsuite/ld-elf/unknown2.d: Likewise. * testsuite/ld-gc/abi-note.d: Likewise. * testsuite/ld-gc/pr11218.d: Likewise. * testsuite/ld-gc/pr19167.d: Likewise. * testsuite/ld-gc/pr20022.d: Likewise. * testsuite/ld-gc/start.d: Likewise. * testsuite/ld-gc/stop.d: Likewise. * testsuite/ld-scripts/phdrs2.exp: Likewise. * testsuite/ld-scripts/rgn-at5.d: Likewise. * testsuite/ld-undefined/entry-3.d: Likewise. * testsuite/ld-undefined/entry-4.d: Likewise.	8 years ago
Alan Modra	2ac93be706	Remove arm-aout and arm-coff support This also removes arm-netbsd (not arm-netbsdelf!), arm-openbsd, and arm-riscix. Those targets weren't on the obsolete list but they are all aout, and it doesn't make all that much sense to remove arm-aout without removing them too. bfd/ * Makefile.am: Remove arm-aout and arm-coff support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * aout-arm.c: Delete. * armnetbsd.c: Delete. * riscix.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/arm/objdump.exp: Remove arm-aout and arm-coff support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove arm-aout and arm-coff support. * config/tc-arm.c: Likewise. * config/tc-arm.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/aarch64/codealign.d: Likewise. * testsuite/gas/aarch64/mapping.d: Likewise. * testsuite/gas/aarch64/mapping2.d: Likewise. * testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.d: Likewise. * testsuite/gas/arm/adds-thumb1-reloc-local.d: Likewise. * testsuite/gas/arm/addsw-bad.d: Likewise. * testsuite/gas/arm/align.d: Likewise. * testsuite/gas/arm/align64.d: Likewise. * testsuite/gas/arm/arch7.d: Likewise. * testsuite/gas/arm/arch7a-mp.d: Likewise. * testsuite/gas/arm/arch7em.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise. * testsuite/gas/arm/arm-it-auto-2.d: Likewise. * testsuite/gas/arm/arm-it-auto-3.d: Likewise. * testsuite/gas/arm/arm-it-auto.d: Likewise. * testsuite/gas/arm/arm-it-bad-2.d: Likewise. * testsuite/gas/arm/arm-it.d: Likewise. * testsuite/gas/arm/armv7e-m+fpv5-d16.d: Likewise. * testsuite/gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-scalar.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-simd.d: Likewise. * testsuite/gas/arm/armv8-a+crypto.d: Likewise. * testsuite/gas/arm/armv8-a+fp.d: Likewise. * testsuite/gas/arm/armv8-a+ras.d: Likewise. * testsuite/gas/arm/armv8-a+rdma-warning.d: Likewise. * testsuite/gas/arm/armv8-a+rdma.d: Likewise. * testsuite/gas/arm/armv8-a+simd.d: Likewise. * testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8-r+fp.d: Likewise. * testsuite/gas/arm/armv8-r+simd.d: Likewise. * testsuite/gas/arm/armv8-r-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8_1-a+simd.d: Likewise. * testsuite/gas/arm/armv8_2+rdma.d: Likewise. * testsuite/gas/arm/armv8_2-a.d: Likewise. * testsuite/gas/arm/armv8_3-a-fp.d: Likewise. * testsuite/gas/arm/armv8_3-a-simd.d: Likewise. * testsuite/gas/arm/armv8a-automatic-hlt.d: Likewise. * testsuite/gas/arm/armv8a-automatic-lda.d: Likewise. * testsuite/gas/arm/attr-syntax.d: Likewise. * testsuite/gas/arm/automatic-bw.d: Likewise. * testsuite/gas/arm/automatic-cbz.d: Likewise. * testsuite/gas/arm/automatic-clrex.d: Likewise. * testsuite/gas/arm/automatic-lda.d: Likewise. * testsuite/gas/arm/automatic-ldaex.d: Likewise. * testsuite/gas/arm/automatic-ldaexb.d: Likewise. * testsuite/gas/arm/automatic-ldrex.d: Likewise. * testsuite/gas/arm/automatic-ldrexd.d: Likewise. * testsuite/gas/arm/automatic-movw.d: Likewise. * testsuite/gas/arm/automatic-sdiv.d: Likewise. * testsuite/gas/arm/automatic-strexb.d: Likewise. * testsuite/gas/arm/barrier-bad-thumb.d: Likewise. * testsuite/gas/arm/barrier-bad.d: Likewise. * testsuite/gas/arm/barrier-thumb.d: Likewise. * testsuite/gas/arm/barrier.d: Likewise. * testsuite/gas/arm/bignum1.d: Likewise. * testsuite/gas/arm/blx-bad.d: Likewise. * testsuite/gas/arm/blx-bl-convert.d: Likewise. * testsuite/gas/arm/blx-local.s: Likewise. * testsuite/gas/arm/crc32-armv8-a-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-a.d: Likewise. * testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-r.d: Likewise. * testsuite/gas/arm/dis-data.d: Likewise. * testsuite/gas/arm/dis-data2.d: Likewise. * testsuite/gas/arm/dis-data3.d: Likewise. * testsuite/gas/arm/eabi_attr_1.d: Likewise. * testsuite/gas/arm/fp-save.d: Likewise. * testsuite/gas/arm/group-reloc-alu-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-alu-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-alu.d: Likewise. * testsuite/gas/arm/group-reloc-ldc-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldc-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldc.d: Likewise. * testsuite/gas/arm/group-reloc-ldr-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldr-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldr.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs.d: Likewise. * testsuite/gas/arm/insn-error-a.d: Likewise. * testsuite/gas/arm/insn-error-t.d: Likewise. * testsuite/gas/arm/inst-po-2.d: Likewise. * testsuite/gas/arm/inst-po-3.d: Likewise. * testsuite/gas/arm/inst-po-be.d: Likewise. * testsuite/gas/arm/inst-po.d: Likewise. * testsuite/gas/arm/ldconst.d: Likewise. * testsuite/gas/arm/ldgesb-bad.d: Likewise. * testsuite/gas/arm/ldgesh-bad.d: Likewise. * testsuite/gas/arm/ldst-offset0.d: Likewise. * testsuite/gas/arm/local_function.d: Likewise. * testsuite/gas/arm/local_label_coff.d: Likewise. * testsuite/gas/arm/local_label_elf.d: Likewise. * testsuite/gas/arm/mapping.d: Likewise. * testsuite/gas/arm/mapping2.d: Likewise. * testsuite/gas/arm/mapping3.d: Likewise. * testsuite/gas/arm/mapping4.d: Likewise. * testsuite/gas/arm/mapshort-elf.d: Likewise. * testsuite/gas/arm/mask_1-armv8-a.d: Likewise. * testsuite/gas/arm/mask_1-armv8-r.d: Likewise. * testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.d: Likewise. * testsuite/gas/arm/movs-thumb1-reloc-local.d: Likewise. * testsuite/gas/arm/movw-local.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v6t2.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v7-m.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v7e-m.d: Likewise. * testsuite/gas/arm/msr-imm-bad.d: Likewise. * testsuite/gas/arm/msr-reg-bad.d: Likewise. * testsuite/gas/arm/msr-reg-thumb.d: Likewise. * testsuite/gas/arm/nomapping.d: Likewise. * testsuite/gas/arm/nops.d: Likewise. * testsuite/gas/arm/pic.d: Likewise. * testsuite/gas/arm/pinsn.d: Likewise. * testsuite/gas/arm/plt-1.d: Likewise. * testsuite/gas/arm/pr21458.d: Likewise. * testsuite/gas/arm/pr9722.d: Likewise. * testsuite/gas/arm/strex-t.d: Likewise. * testsuite/gas/arm/t2-branch-global.d: Likewise. * testsuite/gas/arm/target-reloc-1.d: Likewise. * testsuite/gas/arm/thumb-b-bad.d: Likewise. * testsuite/gas/arm/thumb-w-bad.d: Likewise. * testsuite/gas/arm/thumb-w-good.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumb2_it.d: Likewise. * testsuite/gas/arm/thumb2_it_auto.d: Likewise. * testsuite/gas/arm/thumb2_it_search.d: Likewise. * testsuite/gas/arm/thumb2_ldmstm.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_armv6.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_armv6t2.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Likewise. * testsuite/gas/arm/thumb2_pool.d: Likewise. * testsuite/gas/arm/thumb2_vpool.d: Likewise. * testsuite/gas/arm/thumb2_vpool_be.d: Likewise. * testsuite/gas/arm/thumb32.d: Likewise. * testsuite/gas/arm/thumbver.d: Likewise. * testsuite/gas/arm/tls.d: Likewise. * testsuite/gas/arm/tls_vxworks.d: Likewise. * testsuite/gas/arm/undefined.d: Likewise. * testsuite/gas/arm/undefined_coff.d: Likewise. * testsuite/gas/arm/unwind.d: Likewise. * testsuite/gas/arm/v4bx.d: Likewise. * testsuite/gas/arm/vcmp-noprefix-imm.d: Likewise. * testsuite/gas/arm/vcvt-bad.d: Likewise. * testsuite/gas/arm/vfma1.d: Likewise. * testsuite/gas/arm/vldconst.d: Likewise. * testsuite/gas/arm/vldconst_be.d: Likewise. * testsuite/gas/arm/vldm-arm.d: Likewise. * testsuite/gas/arm/vldr.d: Likewise. * testsuite/gas/arm/weakdef-1.d: Likewise. * testsuite/gas/arm/weakdef-2.d: Likewise. * config/te-riscix.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove arm-aout and arm-coff support. * configure.tgt: Likewise. * testsuite/ld-arm/attr-merge-div-00.d: Likewise. * testsuite/ld-arm/attr-merge-div-01-m3.d: Likewise. * testsuite/ld-arm/attr-merge-div-01.d: Likewise. * testsuite/ld-arm/attr-merge-div-02.d: Likewise. * testsuite/ld-arm/attr-merge-div-10-m3.d: Likewise. * testsuite/ld-arm/attr-merge-div-10.d: Likewise. * testsuite/ld-arm/attr-merge-div-11.d: Likewise. * testsuite/ld-arm/attr-merge-div-12.d: Likewise. * testsuite/ld-arm/attr-merge-div-120.d: Likewise. * testsuite/ld-arm/attr-merge-div-20.d: Likewise. * testsuite/ld-arm/attr-merge-div-21.d: Likewise. * testsuite/ld-arm/attr-merge-div-22.d: Likewise. * testsuite/ld-arm/attr-merge-hardfp-use-1.d: Likewise. * testsuite/ld-arm/attr-merge-hardfp-use-2.d: Likewise. * testsuite/ld-arm/attr-merge-nosection-1.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-2.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-2r.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-3.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-1.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-10.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-10r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-11.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-11r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-12.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-12r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-13.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-13r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-14.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-14r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-1r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-2.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-2r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-3.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-4.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-5.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-6.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-6r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-7.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-7r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-8.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-8r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-9.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-9r.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-00-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-00.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-02-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-02.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-04-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-04.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-20-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-20.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-22-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-22.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-24-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-40-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-40.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-42-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-44-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-44.d: Likewise. * testsuite/ld-arm/eabi-hard-float.d: Likewise. * testsuite/ld-arm/eabi-soft-float-ABI4.d: Likewise. * testsuite/ld-arm/eabi-soft-float-r.d: Likewise. * testsuite/ld-arm/eabi-soft-float.d: Likewise. * testsuite/ld-arm/gc-hidden-1.d: Likewise. * emulparams/armaoutb.sh: Delete. * emulparams/armaoutl.sh: Delete. * emulparams/armcoff.sh: Delete. * emulparams/armnbsd.sh: Delete. * emulparams/riscix.sh: Delete. * scripttempl/armaout.sc: Delete. * scripttempl/armcoff.sc: Delete. * scripttempl/riscix.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.	8 years ago
Alan Modra	dc12032bca	Remove m68k-aout and m68k-coff support include/ * aout/host.h: Remove m68k-aout and m68k-coff support. * aout/hp300hpux.h: Delete. * coff/apollo.h: Delete. * coff/aux-coff.h: Delete. * coff/m68k.h: Delete. bfd/ * Makefile.am: Remove m68k-aout and m68k-coff support. * aoutf1.h: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * bfd-in.h: Likewise. * bfd.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * configure.host: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * freebsd.h: Likewise. * gen-aout.c: Likewise. * hpux-core.c: Likewise. * libaout.h: Likewise. * libbfd-in.h: Likewise. * pdp11.c: Likewise. * peicode.h: Likewise. * riscix.c: Likewise. * targets.c: Likewise. * aout0.c: Delete. * coff-apollo.c: Delete. * coff-aux.c: Delete. * coff-m68k.c: Delete. * coff-svm68k.c: Delete. * coff-u68k.c: Delete. * hosts/delta68.h: Delete. * hosts/hp300bsd.h: Delete. * hosts/m68kaux.h: Delete. * hosts/news.h: Delete. * hp300bsd.c: Delete. * hp300hpux.c: Delete. * liboasys.h: Delete. * m68k4knetbsd.c: Delete. * m68klinux.c: Delete. * m68knetbsd.c: Delete. * oasys.c: Delete. * versados.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff support. * testsuite/binutils-all/copy-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove m68k-aout and m68k-coff support. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/weakref1u.d: Likewise. * testsuite/gas/m68k/all.exp: Likewise. * testsuite/gas/m68k/br-isaa.d: Likewise. * testsuite/gas/m68k/br-isab.d: Likewise. * testsuite/gas/m68k/br-isac.d: Likewise. * config/te-psos.h: Delete. * config/te-sun3.h: Delete. * testsuite/gas/m68k-coff/gas.exp: Delete. * testsuite/gas/m68k-coff/p2389.s: Delete. * testsuite/gas/m68k-coff/p2389a.s: Delete. * testsuite/gas/m68k-coff/p2430.s: Delete. * testsuite/gas/m68k-coff/p2430a.s: Delete. * testsuite/gas/m68k-coff/t1.s: Delete. * testsuite/gas/m68k/p3041.d: Delete. * testsuite/gas/m68k/p3041.s: Delete. * testsuite/gas/m68k/p3041data.d: Delete. * testsuite/gas/m68k/p3041data.s: Delete. * testsuite/gas/m68k/p3041pcrel.d: Delete. * testsuite/gas/m68k/p3041pcrel.s: Delete. * testsuite/gas/m68k/t2.d: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove m68k-aout and m68k-coff support. * configure.tgt: Likewise. * emultempl/m68kelf.em: Likewise. * ld.texinfo: Likewise. * mri.c: Likewise. * emulparams/delta68.sh: Delete. * emulparams/hp300bsd.sh: Delete. * emulparams/hp3hpux.sh: Delete. * emulparams/m68k4knbsd.sh: Delete. * emulparams/m68kaout.sh: Delete. * emulparams/m68kaux.sh: Delete. * emulparams/m68kcoff.sh: Delete. * emulparams/m68klinux.sh: Delete. * emulparams/m68knbsd.sh: Delete. * emulparams/m68kpsos.sh: Delete. * emulparams/sun3.sh: Delete. * emultempl/m68kcoff.em: Delete. * scripttempl/delta68.sc: Delete. * scripttempl/m68kaux.sc: Delete. * scripttempl/m68kcoff.sc: Delete. * scripttempl/psos.sc: Delete. * testsuite/ld-versados/t1-1.ro: Delete. * testsuite/ld-versados/t1-2.ro: Delete. * testsuite/ld-versados/t1.ld: Delete. * testsuite/ld-versados/t1.ook: Delete. * testsuite/ld-versados/t2-1.ro: Delete. * testsuite/ld-versados/t2-2.ro: Delete. * testsuite/ld-versados/t2-3.ro: Delete. * testsuite/ld-versados/t2.ld: Delete. * testsuite/ld-versados/t2.ook: Delete. * testsuite/ld-versados/versados.exp: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.	8 years ago
Alan Modra	211dc24b87	Remove sh5 and sh64 support include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.	8 years ago
Alan Modra	a9a4b30244	Remove w65 support include/ * coff/internal.h: Remove w65 support. * coff/w65.h: Delete. bfd/ * Makefile.am: Remove w65 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-w65.c: Delete. * cpu-w65.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove w65 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * w65-dis.c: Delete. * w65-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove w65 support. ld/ * Makefile.am: Remove w65 support. * configure.tgt: Likewise. * emulparams/w65.sh: Delete. * scripttempl/w65.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.	8 years ago
Alan Modra	e82aa7944d	Remove h8500 support include/ * coff/h8500.h: Delete. * coff/internal.h: Remove h8500 support. bfd/ * Makefile.am: Remove h8500 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-h8500.c: Delete. * cpu-h8500.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove h8500 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * h8500-dis.c: Delete. * h8500-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8500 support. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/obj-coff.h: Remove h8500 support. ld/ * Makefile.am: Remove h8500 support. * configure.tgt: Likewise. * emulparams/h8500.sh: Delete. * emulparams/h8500b.sh: Delete. * emulparams/h8500c.sh: Delete. * emulparams/h8500m.sh: Delete. * emulparams/h8500s.sh: Delete. * scripttempl/h8500.sc: Delete. * scripttempl/h8500b.sc: Delete. * scripttempl/h8500c.sc: Delete. * scripttempl/h8500m.sc: Delete. * scripttempl/h8500s.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.	8 years ago
Alan Modra	fe0bf0fd57	Remove h8300-coff support include/ * coff/h8300.h: Delete. bfd/ * Makefile.am: Remove h8300-coff support. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * reloc16.c: Likewise. * targets.c: Likewise. * coff-h8300.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8300-coff support. gas/ * config/obj-coff.h: Remove h8300-coff support. * config/tc-h8300.c: Likewise. * config/tc-h8300.h: Likewise. * testsuite/gas/h8300/h8300.exp: Likewise. * testsuite/gas/h8300/branch-coff.s: Delete. * testsuite/gas/h8300/branchh-coff.s: Delete. * testsuite/gas/h8300/branchs-coff.s: Delete. * testsuite/gas/h8300/ffxx1-coff.d: Delete. * testsuite/gas/h8300/ffxx1-coff.s: Delete. * testsuite/gas/h8300/h8300-coff.exp: Delete. ld/ * Makefile.am: Remove h8300-coff support. * configure.tgt: Likewise. * testsuite/ld-h8300/h8300.exp: Likewise. * emulparams/h8300.sh: Delete. * emulparams/h8300h.sh: Delete. * emulparams/h8300hn.sh: Delete. * emulparams/h8300s.sh: Delete. * emulparams/h8300sn.sh: Delete. * emulparams/h8300sx.sh: Delete. * emulparams/h8300sxn.sh: Delete. * scripttempl/h8300.sc: Delete. * scripttempl/h8300h.sc: Delete. * scripttempl/h8300hn.sc: Delete. * scripttempl/h8300s.sc: Delete. * scripttempl/h8300sn.sc: Delete. * scripttempl/h8300sx.sc: Delete. * scripttempl/h8300sxn.sc: Delete. * testsuite/ld-h8300/relax-3-coff.d: Delete. * testsuite/ld-h8300/relax-4-coff.d: Delete. * testsuite/ld-h8300/relax-5-coff.d: Delete. * testsuite/ld-h8300/relax-6-coff.d: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.	8 years ago
Alan Modra	a8eb42a8b7	Remove i860, i960, bout and aout-adobe targets Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.	8 years ago
Alan Modra	d4ae193277	Fix some strip test fails on nds32 and pru Fixes these fails: nds32le-linux +FAIL: binutils-all/strip-14 nds32le-linux +FAIL: binutils-all/strip-15 pru-elf +FAIL: binutils-all/strip-14 pru-elf +FAIL: binutils-all/strip-15 strip-13 fails on nds32 due to an assertion failure and out of bounds access to nds32_elf_howto_table. * testsuite/binutils-all/objcopy.exp (strip-14, strip-15): Choose reloc=11 for pru and reloc=50 for nds32. * testsuite/binutils-all/strip-15.d: Accept 0xb reloc number.	8 years ago
Maciej W. Rozycki	d52e3d06e5	binutils/testsuite: Fix a crash with STN_UNDEF in relocation Verify that `strip' completes successfully and a correct relocation entry is copied for a relocation encountered with the STN_UNDEF symbol index. binutils/ * testsuite/binutils-all/strip-15.d: New test. * testsuite/binutils-all/strip-15rel.s: New test source. * testsuite/binutils-all/strip-15rela.s: New test source. * testsuite/binutils-all/strip-15mips64.s: New test source. * testsuite/binutils-all/objcopy.exp: Run the new test.	8 years ago
Maciej W. Rozycki	3f97ba9fc8	binutils/testsuite: Verify the handling of invalid `r_sym' in relocation Verify that `strip' terminates gracefully and a correct error message is produced for a relocation encountered with an invalid symbol index. No single relocation number is valid across all targets we support, so pick a few numbers to choose from depending on the target. binutils/ * testsuite/binutils-all/strip-14.d: New test. * testsuite/binutils-all/strip-14rel.s: New test source. * testsuite/binutils-all/strip-14rela.s: New test source. * testsuite/binutils-all/strip-14mips64.s: New test source. * testsuite/binutils-all/objcopy.exp: Run the new test.	8 years ago
Maciej W. Rozycki	2f8ceb3899	binutils/testsuite: Support REL and MIPS64 reloc formats with `strip-13' Add source variants for the `strip-13' test that produce relocations in the REL and MIPS64 formats, fixing a failure for the `mips64el-openbsd' target. This also corrects output for `i86-', `i960-', `m6812-' and `m68hc12-', o32 `mips-', and `score-' targets, which however does not show up as a test result change due to lax error message matching causing `bad value' previously produced by `strip' as a result of input file rejection to be accepted as a test pass. For `m6811-' aka `m68hc11-' targets this causes a phantom regression, because they use 16-bit addressing and therefore `.dc.a' emits 16-bit quantities causing relocation data constructed in assembly not to be as expected. Previously input was rejected by `strip' with a `bad value' message and now it is accepted, however due to the relocation data error the relocation number is not one of the unsupported ones and the tool completes successfully, which scores as a test failure. Disable the test case for `m6811-' and `m68hc11-' targets then, as it is a test case bug rather than a problem with the relevant backend. A separate change to the test case is required to correct this problem, at which point the test case can be enabled for the affected targets. binutils/ testsuite/binutils-all/strip-13.s: Rename to... * testsuite/binutils-all/strip-13rela.s: ... this. * testsuite/binutils-all/strip-13rel.s: New test source. * testsuite/binutils-all/strip-13mips64.s: New test source. * testsuite/binutils-all/strip-13.d: Remove `arm-', `d10v-', `dlx-' and `xgate-' from `not-target' list. Add `m6811-' and `m68hc11-' to `not-target' list. * testsuite/binutils-all/objcopy.exp: Switch between sources for `strip-13'.	8 years ago
Nick Clifton	f3185997ac	Have info_to_howto functions return a success/fail status. Check this result. Stop strip from completeing if one of these functions fails. bfd PR 22875 * elf-bfd.h (struct elf_backend_data): Change the return type of the elf_info_to_howto and elf_info_to_howto_rel function pointers to bfd_boolean. * elfcode.h (elf_slurp_reloc_table_from_section): Check the return value from the info_to_howto function and fail if that function failed. * elf32-h8300.c (elf32_h8_relocate_section): Check return value from the info_to_howto function. (elf32_h8_relax_section): Likewise. * elf32-lm32.c (lm32_elf_relocate_section): Likewise. * elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Likewise. * elf32-score.c (s3_bfd_score_elf_relocate_section): Likewise. * elf32-score7.c (s7_bfd_score_elf_relocate_section): Likewise. * elf32-tic6x.c (elf32_tic6x_relocate_section): Likewise. * elf64-ia64-vms.c (elf64_ia64_relocate_section): Likewise. * elf64-sparc.c (elf64_sparc_slurp_one_reloc_table): Likewise. * elf64-x86-64.c (elf_x86_64_tls_transition): Likewise. * elfnn-ia64.c (elfNN_ia64_relocate_section): Likewise. * elfnn-riscv.c (riscv_elf_check_relocs): Likewise. (riscv_elf_relocate_section): Likewise. * elf-hppa.h (elf_hppa_info_to_howto): Change return type to bfd_boolean. Issue an error message, set an error value and return FALSE if the reloc is not recognized. (elf_hppa_info_to_howto_rel): Likewise. * elf-m10200.c (mn10200_info_to_howto): Likewise. * elf-m10300.c (mn10300_info_to_howto): Likewise. * elf.c (_bfd_elf_no_info_to_howto): Likewise. * elf32-arc.c (arc_info_to_howto_rel): Likewise. * elf32-arm.c (elf32_arm_info_to_howto): Likewise. * elf32-avr.c (avr_info_to_howto_rela): Likewise. * elf32-bfin.c (bfin_info_to_howto): Likewise. * elf32-cr16.c (elf_cr16_info_to_howto): Likewise. * elf32-cr16c.c (elf_cr16c_info_to_howto): Likewise. * elf32-cris.c (elf_cr16c_info_to_howto_rel, cris_info_to_howto_rela): Likewise. * elf32-crx.c (elf_crx_info_to_howto): Likewise. * elf32-d10v.c (d10v_info_to_howto_rel): Likewise. * elf32-d30v.c (d30v_info_to_howto_rel, d30v_info_to_howto_rela): Likewise. * elf32-dlx.c (dlx_rtype_to_howto, elf32_dlx_info_to_howto, elf32_dlx_info_to_howto_rel): Likewise. * elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise. * elf32-fr30.c (fr30_info_to_howto_rela): Likewise. * elf32-frv.c (frv_info_to_howto_rela, frvfdpic_info_to_howto_rel): Likewise. * elf32-ft32.c (ft32_info_to_howto_rela): Likewise. * elf32-gen.c (elf_generic_info_to_howto, elf_generic_info_to_howto_rel): Likewise. * elf32-h8300.c (elf32_h8_info_to_howto, elf32_h8_info_to_howto_rel): Likewise. * elf32-i370.c (i370_elf_info_to_howto): Likewise. * elf32-i386.c (elf_i386_reloc_type_lookup, elf_i386_rtype_to_howto, elf_i386_info_to_howto_rel): Likewise. * elf32-i860.c (lookup_howto, elf32_i860_info_to_howto_rela): Likewise. * elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise. * elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise. * elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise. * elf32-lm32.c (lm32_info_to_howto_rela): Likewise. * elf32-m32c.c (m32c_info_to_howto_rela): Likewise. * elf32-m32r.c (m32r_info_to_howto_rel, m32r_info_to_howto): Likewise. * elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise. * elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise. * elf32-m68k.c (rtype_to_howto): Likewise. * elf32-mcore.c (mcore_elf_info_to_howto): Likewise. * elf32-mep.c (mep_info_to_howto_rela): Likewise. * elf32-metag.c (metag_info_to_howto_rela): Likewise. * elf32-microblaze.c (microblaze_elf_info_to_howto): Likewise. * elf32-mips.c (mips_info_to_howto_rel, mips_info_to_howto_rela): Likewise. * elf32-moxie.c (moxie_info_to_howto_rela): Likewise. * elf32-msp430.c (msp430_info_to_howto_rela): Likewise. * elf32-mt.c (mt_info_to_howto_rela): Likewise. * elf32-nds32.c (nds32_info_to_howto_rel, nds32_info_to_howto): Likewise. * elf32-nios2.c (nios2_elf32_info_to_howto): Likewise. * elf32-or1k.c (or1k_info_to_howto_rela): Likewise. * elf32-pj.c (pj_elf_info_to_howto): Likewise. * elf32-ppc.c (ppc_elf_info_to_howto): Likewise. * elf32-pru.c (pru_elf32_info_to_howto): Likewise. * elf32-rl78.c (rl78_info_to_howto_rela): Likewise. * elf32-rx.c (rx_info_to_howto_rela): Likewise. * elf32-s390.c (elf_s390_info_to_howto): Likewise. * elf32-score.c (s3_bfd_score_info_to_howto, _bfd_score_info_to_howto): Likewise. * elf32-score7.c (s7_bfd_score_info_to_howto): Likewise. * elf32-sh.c (sh_elf_info_to_howto): Likewise. * elf32-spu.c (spu_elf_info_to_howto): Likewise. * elf32-tic6x.c (elf32_tic6x_info_to_howto, elf32_tic6x_info_to_howto_rel): Likewise. * elf32-tilepro.c (tilepro_info_to_howto_rela): Likewise. * elf32-v850.c (v850_elf_info_to_howto_rel, v850_elf_info_to_howto_rela, v800_elf_info_to_howto): Likewise. * elf32-vax.c (rtype_to_howto): Likewise. * elf32-visium.c (visium_info_to_howto_rela): Likewise. * elf32-wasm32.c (elf32_wasm32_rtype_to_howto, elf32_wasm32_info_to_howto_rela): Likewise. * elf32-xc16x.c (elf32_xc16x_info_to_howto): Likewise. * elf32-xgate.c (xgate_info_to_howto_rel): Likewise. * elf32-xstormy16.c (xstormy16_info_to_howto_rela): Likewise. * elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise. * elf64-alpha.c (elf64_alpha_info_to_howto): Likewise. * elf64-gen.c (elf_generic_info_to_howto, elf_generic_info_to_howto_rel): Likewise. * elf64-ia64-vms.c (elf64_ia64_info_to_howto): Likewise. * elf64-mips.c (mips_elf64_info_to_howto_rela): Likewise. * elf64-mmix.c (mmix_info_to_howto_rela): Likewise. * elf64-ppc.c (ppc64_elf_info_to_howto): Likewise. * elf64-s390.c (elf_s390_reloc_type_lookup): Likewise. * elf64-sh64.c (elf_s390_info_to_howto, sh_elf64_info_to_howto): Likewise. * elf64-x86-64.c (elf_x86_64_info_to_howto): Likewise. * elfn32-mips.c (mips_info_to_howto_rel, mips_info_to_howto_rela): Likewise. * elfnn-aarch64.c (elfNN_aarch64_info_to_howto): Likewise. * elfnn-ia64.c (elfNN_ia64_info_to_howto): Likewise. * elfnn-riscv.c (riscv_info_to_howto_rela): Likewise. * elfxx-ia64.c (ia64_elf_reloc_type_lookup): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_info_to_howto): Likewise. * elfxx-tilegx.c (tilegx_info_to_howto_rela): Likewise. * elf32-score.h (s7_bfd_score_info_to_howto): Update prototype. * elfxx-sparc.h (_bfd_sparc_elf_info_to_howto): Update prototype. * elfxx-tilegx.h (tilegx_info_to_howto_rela): Update prototype. * elfxx-target.h (elf_info_to_howto, elf_info_to_howto_rel): Default to NULL. binutils PR 22875 * objcopy.c (copy_object): Check the error status after marking symbols used in relocations. * testsuite/binutils-all/strip-13.s: New test source file. * testsuite/binutils-all/strip-13.s: New test driver file. * testsuite/binutils-all/objcopy.exp: Run the new test.	8 years ago
Alan Modra	6e5e9d58c1	PR22836, "-r -s" doesn't work with -g3 using GCC 7 This fixes the case where all of a group is removed with ld -r, the situation in the PR, and failures where part of a group is removed that contain relocs. bfd/ PR 22836 * elf.c (_bfd_elf_fixup_group_sections): Account for removed relocation sections. If size reduces to just the flag word, remove that too and mark with SEC_EXCLUDE. * elflink.c (bfd_elf_final_link): Strip empty group sections. binutils/ * testsuite/binutils-all/group-7.s, * testsuite/binutils-all/group-7a.d, * testsuite/binutils-all/group-7b.d, * testsuite/binutils-all/group-7c.d: New tests. * testsuite/binutils-all/objcopy.exp: Run them. ld/ * testsuite/ld-elf/pr22836-2.d, * testsuite/ld-elf/pr22836-2.s: New test.	8 years ago
Nick Clifton	6f156d7a4a	Add support for v3 binary annotation notes. I am checking in the attached patch which updates the binutils support for version 3 binary annotation notes. (Version 3 adds an end address to the ranges covered by the notes, so that it is possible to detect gaps in the coverage). This patch also stops the note merging feature of objcopy from executing if the notes have relocations against them. This makes the code simpler, and prevents the problems with architectures which have unusual relocation management issues. * objcopy.c (objcopy_internal_note): New structure. (gap_exists): New function. (is_open_note): New function. (is_func_note): New function. (is_64bit): New function. (merge_gnu_build_notes): Handle v3 notes. Do not merge if there are relocations against the notes. * readelf.c (get_note_type): Use short names for build attribute notes. (print_symbol_for_build_attribute): Rename to get_symbol_for_build_attribute. Returns the found symbol rather than printing it. (print_gnu_build_attribute_description): Maintain address ranges for function notes as well as global notes. Handle v3 notes. (print_gnu_build_attribute_name): Use more space for printing the name in wide mode. * testsuite/binutils-all/note-2-32.s: Use .dc.l instead of .word. Eliminate symbol references in order to remove the need for relocations. * testsuite/binutils-all/note-2-64.s: Likewise. * testsuite/binutils-all/note-3-32.s: Add a size to the note_1 symbol. * testsuite/binutils-all/note-3-64.s: Likewise. * testsuite/binutils-all/mips/mips-note-2r-n32.d: Update expected output. * testsuite/binutils-all/mips/mips-note-2r-n64.d: Likewise. * testsuite/binutils-all/mips/mips-note-2r.d: Likewise. * testsuite/binutils-all/note-2-32.d: Likewise. * testsuite/binutils-all/note-2-64.d: Likewise. * testsuite/binutils-all/note-3-32.d: Likewise. * testsuite/binutils-all/note-3-64.d: Likewise. * testsuite/binutils-all/note-4-64.s: New test. Checks v3 notes. * testsuite/binutils-all/note-4-32.s: New test. * testsuite/binutils-all/note-4-64.d: New test result file. * testsuite/binutils-all/note-4-32.d: New test result file.	8 years ago
Alan Modra	219d1afa89	Update year range in copyright notice of binutils files	8 years ago
Alan Modra	f795c49463	Test binutils_assemble return value This is a followup to "binutils nm testsuite tidy". Since the perror in binutils_assemble has been removed, we need to take more care in failure paths. The patch also fixed a number of .exp files that have multiple tests, where an assembly failure returns from the .exp file. In most cases it is nicer to attempt all tests. * testsuite/binutils-all/ar.exp (unique_symbol): Don't run AR if assembly fails. * testsuite/binutils-all/arc/objdump.exp (check_assembly): If objfile is empty, fail test. * testsuite/binutils-all/arm/objdump.exp: Don't return if assembly fails for a test, continue on to other tests. * testsuite/binutils-all/bfin/objdump.exp: Likewise. * testsuite/binutils-all/hppa/objdump.exp: Likewise. * testsuite/binutils-all/m68k/objdump.exp: Likewise. * testsuite/binutils-all/vax/objdump.exp: Likewise. * testsuite/binutils-all/size.exp: Likewise. * testsuite/binutils-all/nm.exp: Likewise. Move PR12753 test. * testsuite/binutils-all/objcopy.exp: Don't perror on assembly fail. * testsuite/binutils-all/objdump.exp: Report assembly fails.	8 years ago
Nick Clifton	714da62f64	Add test of V2 GNU build attribute notes. * testsuite/binutils-all/note-3-64.s: New test. Checks assembly and decoding of version2 GNU build attribute notes. * testsuite/binutils-all/note-3-32.s: New test. 32-bit version of the above test. * testsuite/binutils-all/note-3-64.d: New test driver. * testsuite/binutils-all/note-3-32.d: New test driver. * testsuite/binutils-all/objcopy.exp: Run the new test. * readelf.c (is_64bit_abs_reloc): Add R_SPARC_64.	9 years ago

1 2 3 4

157 Commits (c9dcc18f8ded97ed7cd1dd64da8c7b37b86f61bb)