2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
* sh64-opc.c: Regenerate.
2001-03-13 DJ Delorie <dj@redhat.com>
* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
purpose is more obvious.
* sh64-opc.c (shmedia_table): Ditto.
* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
(print_insn_shmedia): Ditto.
2001-03-12 DJ Delorie <dj@redhat.com>
* sh64-opc.c: Adjust comments to reflect reality: replace bits
3:0 with zeros (not "reserved"), replace "rrrrrr" with
"gggggg" for two-operand floating point opcodes. Remove
"fsina".
2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
Correct printing of .byte:s. Return number of printed bytes or
-1; never 0.
(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
to next four-byte-alignment if insn or data is not aligned.
2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c: Update comments and fix comment formatting.
(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
Abort instead of setting length to 0.
(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
crange_bsearch_cmpl, sh64_get_contents_type,
sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c: Remove #if 0:d entries for instructions not found in
SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
address with same prefix as SHcompact.
In the disassembler, use a .cranges section for linked executables.
* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
and update for using structure in info->private_data.
(struct sh64_disassemble_info): New.
(is_shmedia_p): Delete.
(crange_qsort_cmpb): New function.
(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
pair. Display addresses for linked executables only.
(print_insn_sh64x_media): Initialize info->private_data by calling
init_sh64_disasm_info.
(print_insn_sh64x): Ditto. Find out type of contents by calling
sh64_contents_type_disasm. Display data regions using ".long" and
".byte" similar to unrecognized opcodes.
2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
information in section flags before considering symbols. Don't
assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
* configure.in (bfd_sh_arch): Check presence of sh64 insns by
matching $target $canon_targets instead of looking at the
now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
* configure: Regenerate.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c (shmedia_creg_table): New.
* sh64-opc.h (shmedia_creg_info): New type.
(shmedia_creg_table): Declare.
* sh64-dis.c (creg_name): New function.
(print_insn_shmedia): Use it.
* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
bfd_mach_sh5 to print_insn_sh64 if big-endian and to
print_insn_sh64l if little-endian.
* sh64-dis.c (print_insn_shmedia): Make r unsigned.
(print_insn_sh64l): New.
(print_insn_sh64x): New.
(print_insn_sh64x_media): New.
(print_insn_sh64): Break out code to print_insn_sh64x and
print_insn_sh64x_media.
2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.h: New file
* sh64-opc.c: New file
* sh64-dis.c: New file
* Makefile.am: Add sh64 targets.
(HFILES): Add sh64-opc.h.
(CFILES): Add sh64-opc.c and sh64-dis.c.
(ALL_MACHINES): Add sh64 files.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64 to bfd_sh_arch.
* configure: Regenerate.
* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
print_insn_sh64.
* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
From Steve Ellcey <sje@cup.hp.com>:
* libtool.m4 (HPUX_IA64_MODE): Set to 32 or 64 based on ABI.
(lt_cv_deplibs_check_method, lt_cv_file_magic_cmd,
lt_cv_file_magic_test_file): Set to appropriate values for HP-UX
IA64.
* ltcf-c.sh (archive_cmds, hardcode_*): Ditto.
* ltconfig (shlibpath_*, dynamic_linker, library_names_spec,
soname_spec, sys_lib_search_path_spec): Ditto.
Various configure scripts regenerated.
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
Corinna Vinschen <vinschen@redhat.com>
* Makefile.am: Add support for xstormy16.
* archures.c: Add support for xstormy16.
* config.bfd: Add support for xstormy16.
* configure.in: Add support for xstormy16.
* reloc.c: Add support for xstormy16.
* targets.c: Add support for xstormy16.
* cpu-xstormy16.c: New file.
* elf32-xstormy16.c: New file.
* Makefile.in: Regenerated.
* bfd-in2.h: Regenerated.
* configure: Regenerated.
* libbfd.h: Regenerated.
Index: binutils/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* readelf.c (guess_is_rela): Add support for stormy16.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
Index: gas/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* configure.in: Add support for xstormy16.
* configure: Regenerated.
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerated.
* config/tc-xstormy16.c: New file.
* config/tc-xstormy16.h: New file.
Index: gas/testsuite/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
matthew green <mrg@redhat.com>
* gas/xstormy16/allinsn.d: New file.
* gas/xstormy16/allinsn.exp: New file.
* gas/xstormy16/allinsn.s: New file.
* gas/xstormy16/allinsn.sh: New file.
* gas/xstormy16/gcc.d: New file.
* gas/xstormy16/gcc.s: New file.
* gas/xstormy16/gcc.sh: New file.
* gas/xstormy16/reloc-1.d: New file.
* gas/xstormy16/reloc-1.s: New file.
* gas/xstormy16/reloc-2.d: New file.
* gas/xstormy16/reloc-2.s: New file.
Index: ld/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* Makefile.am: Add support for xstormy16.
* configure.tgt: Add support for xstormy16.
* Makefile.in: Regenerate.
* emulparams/elf32xstormy16.sh: New file.
* scripttempl/xstormy16.sc: New file.
Index: opcodes/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerate.
* configure.in: Add support for xstormy16.
* configure: Regenerate.
* disassemble.c: Add support for xstormy16.
* xstormy16-asm.c: New generated file.
* xstormy16-desc.c: New generated file.
* xstormy16-desc.h: New generated file.
* xstormy16-dis.c: New generated file.
* xstormy16-ibld.c: New generated file.
* xstormy16-opc.c: New generated file.
* xstormy16-opc.h: New generated file.
Index: include/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* dis-asm.h (print_insn_xstormy16): Declare.
Index: include/elf/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* common.h (EM_XSTORMY16): Define.
* xstormy16.h: New file.
bfd:
* Makefile.am (coff64-rs6000.lo): New rule.
* Makefile.in: Regenerate.
* coff-rs6000.c (xcoff_mkobject, xcoff_copy_private_bfd_data,
xcoff_is_local_label_name, xcoff_rtype2howto,
xcoff_reloc_type_lookup, xcoff_slurp_armap, xcoff_archive_p,
xcoff_read_ar_hdr, xcoff_openr_next_archived_file, xcoff_write_armap,
xcoff_write_archive_contents): No longer static, and prefix with _bfd_.
(NO_COFF_SYMBOLS): Define.
(xcoff64_swap_sym_in, xcoff64_swap_sym_out, xcoff64_swap_aux_in,
xcoff64_swap_aux_out): New functions; handle xcoff symbol tables
internally.
(MINUS_ONE): New macro.
(xcoff_howto_tabl, xcoff_reloc_type_lookup): Add 64 bit POS
relocation.
(coff_SWAP_sym_in, coff_SWAP_sym_out, coff_SWAP_aux_in,
coff_SWAP_aux_out): Map to the new functions.
* coff64-rs6000.c: New file.
* libcoff.h (bfd_coff_backend_data): Add new fields
_bfd_coff_force_symnames_in_strings and
_bfd_coff_debug_string_prefix_length.
(bfd_coff_force_symnames_in_strings,
bfd_coff_debug_string_prefix_length): New macros for above fields.
* coffcode.h (coff_set_arch_mach_hook): Handle XCOFF64 magic.
Set machine to 620 for XCOFF64. Use bfd_coff_swap_sym_in instead
of using coff_swap_sym_in directly.
(FORCE_SYMNAMES_IN_STRINGS): New macro, defined for XCOFF64.
(coff_set_flags) Set magic for XCOFF64.
(coff_compute_section_file_positions): Add symbol name length to
string section length if bfd_coff_debug_string_prefix_length is
true.
(coff_write_object_contents): Don't do reloc overflow for XCOFF64.
(coff_slurp_line_table): Use bfd_coff_swap_lineno_in instead of
using coff_swap_lineno_in directly.
(bfd_coff_backend_data): Add _bfd_coff_force_symnames_in_strings
and _bfd_coff_debug_string_prefix_length fields.
* coffgen.c (coff_fix_symbol_name, coff_write_symbols): Force
symbol names into strings table when
bfd_coff_force_symnames_in_strings is true.
* coffswap.h (MAX_SCNHDR_NRELOC, MAX_SCNHDR_NLNNO, GET_RELOC_VADDR,
SET_RELOC_VADDR): New macros.
(coff_swap_reloc_in, coff_swap_reloc_out): Use above macros.
(coff_swap_aux_in, coff_swap_aux_out): Remove RS6000COFF_C
code.
(coff_swap_aouthdr_in, coff_swap_aouthdr_out): Handle XCOFF64
changes within RS6000COFF_C specific code.
(coff_swap_scnhdr_out): Use PUT_SCNHDR_NLNNO, PUT_SCNHDR_NRELOC,
MAX_SCNHDR_NRELOC, and MAX_SCNHDR_NLNNO.
* reloc.c (bfd_perform_relocation, bfd_install_relocation):
Extend existing hack on target name.
* xcofflink.c (XCOFF_XVECP): Extend existing hack on
target name.
* coff-tic54x.c (ticof): Keep up to date with new fields
in bfd_coff_backend_data.
* config.bfd: Add bfd_powerpc_64_arch to targ_arch and define
targ_selvecs to include rs6000coff64_vec for rs6000.
* configure.in: Add rs6000coff64_vec case.
* cpu-powerpc.c: New bfd_arch_info_type.
gas:
* as.c (parse_args): Allow md_parse_option to override -a listing
option.
* config/obj-coff.c (add_lineno): Change type of offset parameter
from "int" to "bfd_vma."
* config/tc-ppc.c (md_pseudo_table): Add "llong" and "machine."
(ppc_mach, ppc_subseg_align, ppc_target_format): New.
(ppc_change_csect): Align correctly for XCOFF64.
(ppc_machine): New function, which discards "ppc_machine" line.
(ppc_tc): Cons for 8 when code is 64 bit.
(md_apply_fix3): Don't check operand->insert. Handle 64 bit
relocations.
(md_parse_option): Handle -a64 and -a32.
(ppc_xcoff64): New.
* config/tc-ppc.h (TARGET_MACH): Define.
(TARGET_FORMAT): Move to function.
(SUB_SEGMENT_ALIGN): Use ppc_subseg_align.
include:
* include/coff/rs6k64.h: New file.
opcodes:
* configure.in: Add bfd_powerpc_64_arch.
* disassemble.c (disassembler): Use print_insn_big_powerpc for
64 bit code.
Add ``-W -Wall'' to sub-directories bfd, binutils, gas gprof, ld and
opcodes by the addition of WARN_CFLAGS to Makefile.am and configury to
set it. Add configure option --enable-build-warnings.
Re-generate all and sundry using auto*-000227.
Jason Thorpe
Nick Clifton
Alan Modra
Hans-Peter Nilsson
Alexandre Oliva
Daniel Jacobowitz
Geoffrey Keating
Andreas Jaeger
H.J. Lu
Ben Elliston
Jason Eckhardt
Timothy Wall
Clinton Popetz
Jim Wilson
Andrew Cagney
Ian Lance Taylor
Michael Meissner
Richard Henderson
Stan Shebs