New variables.
(i386nbsd_init_abi): Use these to initialize tdep->sigtramp_start
and tdep->sigtramp_end.
* i386obsd-nat.c: New file.
* config/i386/obsd.mh (NATDEPFILES): Add i386obsd-nat.o.
link order code. Don't actually remove the output section here;
Just set a flag for the linker to do so.
* elflink.c (_bfd_elf_link_renumber_dynsyms): Test for removed
sections when setting up output section dynsyms.
* i386-nat.c (child_post_startup_inferior): New function
calling i386_cleanup_dregs if
I386_USE_GENERIC_WATCHPOINTS is defined.
* config/i386/nm-i386.h: define CHILD_POST_STARTUP_INFERIOR
conditional to acknowledge that i386-nat.c has its
own child_post_startup_inferior function.
* i386-tdep.c (i386_do_pop_frame): Use I386_MAX_REGISTER_SIZE
instead of MAX_REGISTER_RAW_SIZE.
(i386_extract_return_value, i386_extract_struct_value_address):
Convert to use regcache.
(i386_gdbarch_init): Set max_register_raw_size and
max_register_virtual_size to I386_MAX_REGISTER_SIZE.
Set extract_return_value and extract_struct_value_address instead
of their deprecated variants.
* i386-tdep.c: Include "symfile.h".
(i386_frameless_signal_p): Consider a function to be frameless if
the pc points at the first instruction of the function.
(i386_frame_chain): Handle (generic) call dummies.
(i386_frame_saved_pc): Likewise.
(i386_frame_init_saved_regs): Remove code dealing with call
dummies on the stack.
(i386_push_dummy_frame): Removed.
(i386_call_dummy_words): Removed.
(i386_fix_call_dummy): Removed.
(i386_push_return_address): New function.
(i386_do_pop_frame): Renamed from i386_pop_frame. Add FRAME
parameter, and don't call get_current_frame.
(i386_pop_frame): New function.
(i386_gdbarch_init): Set use_generic_dummy_frames to 1, set
call_dummy_location to AT_ENTRY_POINT, set call_dummy_address to
entry_point_address, set call_dummy_breakpoint_offset to 0, set
call_dummy_length to 0, set call_dummy_words to NULL, set
sizeof_call_dummy_words to 0, set fix_call_dummy to
generic_fix_call_dummy, set pc_in_call_dummy to
pc_in_call_dummy_at_entry_point, set push_dummy_frame to
generic_push_dummy_frame, set push_return_address to
i386_push_return_address and set frame_chain_valid to
generic_file_frame_chain_valid.
* gdbserver/linux-x86-64-low.c (x86_64_regmap): Make it an array of
byte offsets instead of an array of indexes.
(x86_64_store_gregset, x86_64_store_fpregset): Parameter made const.
(SP_REGNUM, FP_REGNUM, FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK)
(BREAKPOINT_FROM_PC, INNER_THAN, SAVED_PC_AFTER_CALL)
(INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS, INIT_FRAME_PC)
(FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC)
(STORE_RETURN_VALUE, DEPRECATED_EXTRACT_RETURN_VALUE)
(STORE_STRUCT_RETURN, DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS)
(SKIP_PROLOGUE, FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS)
(FRAME_LOCALS_ADDRESS, FRAME_NUM_ARGS, POP_FRAME)
(PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME, PUSH_ARGUMENTS): Remove.
* mcore-tdep.c (mcore_init_extra_frame_info): Add fromleaf
argument so the function fits the prototype in the architecture
vector.
(mcore_pop_frame): Remove argument so the function fits the
prototype. Use get_current_frame instead of the argument.
(mcore_push_arguments): Change type of struct_return so the
function can be used in the architecture vector.
(mcore_store_struct_return): Add.
(mcore_frame_init_saved_regs): Add.
(mcore_gdbarch_init): Add function calls to replace the macros
removed from tm-mcore.h
deprecated_grub_regcache_for_registers.
* values.c: Include "regcache.h".
(value_being_returned): Update. Use
deprecated_grub_regcache_for_registers to extract the register
buffer address.
* value.h (value_being_returned): Change ``retbuf'' parameter to a
``struct regcache''.
* Makefile.in (values.o): Add dependency on $(regcache_h).
* inferior.h (run_stack_dummy): Change type of second parameter to
a ``struct regcache''.
* valops.c (hand_function_call): Change type of retbuf to ``struct
regcache''. Allocate using regcache_xmalloc, clean using
make_cleanup_regcache_xfree.
* infcmd.c (run_stack_dummy): Update. Use
regcache_cpu_no_passthrough instead of memcpy to copy the buffer.
* regcache.c (do_regcache_xfree): New function.
(make_cleanup_regcache_xfree): New function.
* regcache.h (make_cleanup_regcache_xfree): Declare.
* varobj.c (struct varobj_root): Change frame from CORE_ADDR to
struct frame_id.
(varobj_create): Store frame_id for root.
(varobj_gen_name): Use xasprintf.
(varobj_update): Save and restore frame using get_frame_id() and
frame_find_by_id().
(create_child): Use xasprintf.
(new_root_variable): Initialize frame_id.
(c_name_of_child): Use xasprintf. Call find_frame_by_id().
(c_value_of_variable): Use xasprintf. Move mem_fileopen call
to prevent memory leak.
start of function, allocate using malloc, add a cleanup but before
the inf_status cleanup, cleanup the buffer. Rename local variable
old_chain to inf_status_cleanup.
* top.c (execute_command): Use cmd_func() and cmd_func_p().
* cli/cli-decode.c (cmd_func_p): New function.
(cmd_func): New function.
* command.h: Add cmd_func() and cmd_func_p().
* blockframe.c (frame_address_in_block): New function extracted
from get_frame_block().
(get_frame_block): Use frame_address_in_block().
(block_innermost_frame): Use frame_address_in_block() to match
the frame pc address against the block boundaries rather than
the frame pc directly. This prevents a failure when a frame pc
is actually a return-address pointing immediately after the end
of the given block.
used in architecture vector. The default is
m68k_local_breakpoint_from_pc.
(m68k_local_breakpoint_from_pc): Add.
(enum): Add register numbers from tm-m68k.h.
(m68k_gdbarch_init): Add breakpoint_from_pc to architecture vector.
* config/m68k/tm-m68k.h (GDB_MULTI_ARCH): Set to
GDB_MULTI_ARCH_PARTIAL.
(BPT_VECTOR, REGISTER_BYTES_FP, REGISTER_BYTES_NOFP)
(NUM_FREGS, SIG_PC_FP_OFFSET, SP_ARG0, REMOTE_BPT_VECTOR): Move to
m68k-tdep.c.
(BREAKPOINT, REMOTE_BREAKPOINT): Remove.
(A1_REGNUM, FP0_REGNUM, FPC_REGNUM, FPS_REGNUM, FPI_REGNUM): Move
to enum in m68k-tdep.c
loaded by the inferior, rather than the list of libraries loaded
by GDB itself. Otherwise, GDB ends up reading the symbols from
the wrong shared libraries...
(i386_frame_chain): Deal with frameless signals.
(i386_sigtramp_saved_sp): New function.
(i386_frame_saved_pc): Deal with frameless signals.
(i386_saved_pc_after_call): Make sure the correct value is
returned just after entry into a sigtramp.
* i386bsd-tdep.c (i386bsd_sc_sp_offset, i386nbsd_sc_sp_offset,
i386fbsd4_sc_sp_offset): New variables.
(i386bsd_init_abi, i386nbsd_init_abi, i386fbsd4_init_abi): Use
these variables to initialize tdep->sc_sp_offset. * i386bsd-nat.c
(_initialize_i386bsd_nat): Add sanity check for sc_sp_offset
similiar to what we already did for sc_pc_offset.
* i386-sol2-tdep.c (i386_sol2_init_abi): Initialize
tdep->sc_sp_offset.
Mark Kettenis
Alan Modra
Pierre Muller
Michal Ludvig
gdbadmin
DJ Delorie
Andrew Cagney
Grace Sainsbury
Martin Hunt
Nick Clifton
Joel Brobecker
Martin Schwidefsky