binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Jan Beulich	aeab2b26db	x86-64: honor vendor specifics for near RET While vendors agree about default operand size (64 bits) and hence unavilability of a 32-bit form, AMD honors a 16-bit operand size override (0x66) while Intel doesn't.	6 years ago
Jan Beulich	62b3f54810	x86: drop further pointless/bogus DefaultSize - 64-bit CALL permitting just a single operand size doesn't need it. - FLDENV et al should never have had it. It remains suspicious that a number of 64-bit only insns continue to have the attribute, despite this being intended for .code16gcc handling only.	6 years ago
Alan Modra	1bd8ae1004	ubsan: tic4x: left shift cannot be represented in type 'int' The patch also fixes a case where libopcodes built for a 64-bit bfd_vma may print different results to libopcodes built for a 32-bit bfd_vma. * tic4x-dis.c (tic4x_dp): Make unsigned.	6 years ago
H.J. Lu	bc31405ebb	x86-64: Properly encode and decode movsxd movsxd is a 64-bit only instruction. It supports both 16-bit and 32-bit destination registers. Its AT&T mnemonic is movslq which only supports 64-bit destination register. There is also a discrepancy between AMD64 and Intel64 on movsxd with 16-bit destination register. AMD64 supports 32-bit source operand and Intel64 supports 16-bit source operand. This patch updates movsxd encoding and decoding to alow 16-bit and 32-bit destination registers. It also handles movsxd with 16-bit destination register for AMD64 and Intel 64. gas/ PR binutils/25445 * config/tc-i386.c (check_long_reg): Also convert to QWORD for movsxd. * doc/c-i386.texi: Add a node for AMD64 vs. Intel64 ISA differences. Document movslq and movsxd. * testsuite/gas/i386/i386.exp: Run PR binutils/25445 tests. * testsuite/gas/i386/x86-64-movsxd-intel.d: New file. * testsuite/gas/i386/x86-64-movsxd-intel64-intel.d: Likewise. * testsuite/gas/i386/x86-64-movsxd-intel64-inval.l: Likewise. * testsuite/gas/i386/x86-64-movsxd-intel64-inval.s: Likewise. * testsuite/gas/i386/x86-64-movsxd-intel64.d: Likewise. * testsuite/gas/i386/x86-64-movsxd-intel64.s: Likewise. * testsuite/gas/i386/x86-64-movsxd-inval.l: Likewise. * testsuite/gas/i386/x86-64-movsxd-inval.s: Likewise. * testsuite/gas/i386/x86-64-movsxd.d: Likewise. * testsuite/gas/i386/x86-64-movsxd.s: Likewise. opcodes/ PR binutils/25445 * i386-dis.c (MOVSXD_Fixup): New function. (movsxd_mode): New enum. (x86_64_table): Use MOVSXD_Fixup and movsxd_mode on movsxd. (intel_operand_size): Handle movsxd_mode. (OP_E_register): Likewise. (OP_G): Likewise. * i386-opc.tbl: Remove Rex64 and allow 32-bit destination register on movsxd. Add movsxd with 16-bit destination register for AMD64 and Intel64 ISAs. * i386-tbl.h: Regenerated.	6 years ago
Tamar Christina	7568c93bf9	AArch64: Fix cfinv disassembly issues This fixes the preferred disassembly for cfinv. The Armv8.4-a instruction overlaps with the possible encoding space for msr. This because msr allows you to use unallocated encoding space using the general sA_B_cC_cD_E form. However when an encoding does become allocated then we need to ensure that it's used as the preferred disassembly. The problem with cfinv is that its mask has all bits sets because it has no arguments. This causes issues for the Alias resolver in gas as it uses the mask to build alias graph. In this case it can't do it since it thinks almost everything would alias with cfinv. So instead we can only fix this by moving cfinv before msr. gas/ChangeLog: PR 25403 * testsuite/gas/aarch64/armv8_4-a.d: Add cfinv. * testsuite/gas/aarch64/armv8_4-a.s: Likewise. opcodes/ChangeLog: PR 25403 * aarch64-tbl.h (struct aarch64_opcode): Re-order cfinv. * aarch64-asm-2.c: Regenerate * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise.	6 years ago
Jan Beulich	c006a730e9	x86: improve handling of insns with ambiguous operand sizes Commit `b76bc5d54e` ("x86: don't default variable shift count insns to 8-bit operand size") pointed out a very bad case, but the underlying problem is, as mentioned on various occasions, much larger: Silently selecting a (nowhere documented afaict) certain default operand size when there's no "sizing" suffix and no suitable register operand(s) is simply dangerous (for the programmer to make mistakes). While in Intel syntax mode such mistakes already lead to an error (which is going to remain that way), AT&T syntax mode now gains warnings in such cases by default, which can be suppressed or promoted to an error if so desired by the programmer. Furthermore at least general purpose insns now consistently have a default applied (alongside the warning emission), rather than accepting some and refusing others. No warnings are (as before) to be generated for "DefaultSize" insns as well as ones acting on selector and other fixed-width values. For SYSRET, however, the DefaultSize needs to be dropped - it had been wrongly put there in the first place, as it's unrelated to .code16gcc (no stack accesses involved). As set forth as a prereq when I first mentioned this intended change a few years back, Linux as well as gcc have meanwhile been patched to avoid (emission of) ambiguous operands (and hence triggering of the new warning). Note that I think that in 64-bit mode IRET and far RET would better get a diagnostic too, as it's reasonably likely that a suffix-less instance really is meant to be a 64-bit one. But I guess I better make this a separate follow-on patch. Note further that floating point operations with integer operands are an exception for now: They continue to use short (16-bit) operands by default even in 32- and 64-bit modes. Finally note that while {,V}PCMPESTR{I,M} would, strictly speaking, also need to be diagnosed, with their 64-bit forms not being very useful I think it is better to continue to avoid warning about them (by way of them carrying IgnoreSize attributes).	6 years ago
Jan Beulich	c906a69a1f	x86: VCVTNEPS2BF16{X,Y} should permit broadcasting Just like other VCVT{X,Y} templates do, and to allow the programmer flexibility (might be relevant in particular when heavily macro-izing code), the two templates should also have Broadcast set, just like their X/Y-suffix-less counterparts. This in turn requires them to also have Dword set on their memory operands, to cover the logic added to i386gen by `4a1b91eabb` ("x86: Expand Broadcast to 3 bits"), * RegXMM/RegYMM set on their source operands, to satisfy broadcast sizing logic in gas itself. Otherwise ATTSyntax templates wouldn't need such operand size attributes. While extending the test cases, also add Intel syntax broadcast forms without explicit size specifiers.	6 years ago
Nick Clifton	26916852e1	Updated translations for various binutils sub-directories	6 years ago
Alan Modra	4d6cbb6442	ubsan: hppa: negation of -2147483648 * hppa-dis.c (fput_const): Remove useless cast.	6 years ago
Alan Modra	2bddb71a74	ubsan: arm: out of bounds array access .inst 0x81bdfe9f disassembles as 0: 81bdfe9f ldaexdhi pc, reg-names-std, [sp] I'm quite sure "reg-names-std" isn't an ARM register. * arm-dis.c (print_insn_arm): Wrap 'T' value.	6 years ago
Nick Clifton	1b1bb2c67b	Update version to 2.34.50. Regenerate configure and .pot files.	6 years ago
Nick Clifton	ae77468624	Add markers for 2.34 branch to the NEWS files and ChangeLogs.	6 years ago
Christian Biesinger	07f1f3aa53	Fix spelling errors seperate -> separate bfd/ChangeLog: 2020-01-17 Christian Biesinger <cbiesinger@google.com> * coff-arm.c: Fix spelling error (seperate). * elfxx-riscv.c (riscv_parse_sv_or_non_std_ext): Fix spelling error (seperate). * sysdep.h (strnlen): Fix spelling error (seperate). opcodes/ChangeLog: 2020-01-17 Christian Biesinger <cbiesinger@google.com> * opintl.h: Fix spelling error (seperate). sim/arm/ChangeLog: 2020-01-17 Christian Biesinger <cbiesinger@google.com> * iwmmxt.c: Fix spelling error (seperate). Change-Id: I55e5f47bcf3cf3533d2acb7ad338f1be0d5f30f9	6 years ago
H.J. Lu	42e04b3601	x86: Add {vex} pseudo prefix There are 2-byte VEX prefix and 3-byte VEX prefix. 2-byte VEX prefix can't encode all operands. By default, assembler tries 2-byte VEX prefix first. {vex3} can be used to force 3-byte VEX prefix. This patch adds {vex} pseudo prefix and keeps {vex2} for backward compatibility. gas/ * config/tc-i386.c (_i386_insn): Replace vex_encoding_vex2 with vex_encoding_vex. (parse_insn): Likewise. * doc/c-i386.texi: Replace {vex2} with {vex}. Update {vex} and {vex3} documentation. * testsuite/gas/i386/pseudos.s: Replace 3 {vex2} tests with {vex}. * testsuite/gas/i386/x86-64-pseudos.s: Likewise. opcodes/ * i386-opc.tbl: Add {vex} pseudo prefix. * i386-tbl.h: Regenerated.	6 years ago
Andre Vieira	2da2eaf4ce	[binutils][arm] PR25376 Change MVE into a CORE_HIGH feature This patch moves MVE feature bits into the CORE_HIGH section. This makes sure .fpu and -mfpu does not reset the bits set by MVE. This is important because .fpu has no option to "set" these same bits and thus, mimic'ing GCC, we choose to define MVE as an architecture extension rather than put it together with other the legacy fpu features. This will enable the following behavior: .arch armv8.1-m.main .arch mve .fpu fpv5-sp-d16 #does not disable mve. vadd.i32 q0, q1, q2 This patch also makes sure MVE is not taken into account during auto-detect. This was already the case, but because we moved the MVE bits to the architecture feature space we must make sure ARM_ANY does not include MVE. gas/ChangeLog: 2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com> PR 25376 * config/tc-arm.c (mve_ext, mve_fp_ext): Use CORE_HIGH. (armv8_1m_main_ext_table): Use CORE_HIGH for mve. * testsuite/arm/armv8_1-m-fpu-mve-1.s: New. * testsuite/arm/armv8_1-m-fpu-mve-1.d: New. * testsuite/arm/armv8_1-m-fpu-mve-2.s: New. * testsuite/arm/armv8_1-m-fpu-mve-2.d: New. include/ChangeLog: 2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com> PR 25376 * opcodes/arm.h (FPU_MVE, FPU_MVE_FPU): Move these features to... (ARM_EXT2_MVE, ARM_EXT2_MVE_FP): ... the CORE_HIGH space. (ARM_ANY): Redefine to not include any MVE bits. (ARM_FEATURE_ALL): Removed. opcodes/ChangeLog: 2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com> PR 25376 * opcodes/arm-dis.c (coprocessor_opcodes): Use CORE_HIGH for MVE bits. (neon_opcodes): Likewise. (select_arm_features): Make sure we enable MVE bits when selecting armv8.1-m.main. Make sure we do not enable MVE bits when not selecting any architecture.	6 years ago
Jan Beulich	d0849eed78	x86: drop stale Vec_Imm4 related comment I overlooked this in commit `9d3bf266fd` ("x86: drop Vec_Imm4"), presumably because of the mis-spelling.	6 years ago
Jan Beulich	9cf70a448b	x86: add a few more missing VexWIG Alternatively it could also be VexW0 (to match other SSE2AVX), but the VexW attribute shouldn't be left unset.	6 years ago
Jan Beulich	4814632e69	x86: VPEXTRQ/VPINSRQ are unavailable outside of 64-bit mode The AVX512DQ patterns lacking a Cpu64 attribute made the memory operand forms accepted even outside of 64-bit mode, and this even without any {evex} pseudo-prefix (otherwise one could argue that this is an attempt to follow one possible, albeit somewhat odd, interpretation of the SDM wording to this effect). For consistency between the various involved templates drop the * (now) unnecessary IgnoreSize attributes * unnecessary (due to VexW1) Size64 attributes from VEX encoded forms * redundant (with Reg64) Qword operand attributes uniformly.	6 years ago
Alan Modra	aad09917e0	tic4x disassembly static variables tic4x uses a number of static variables for tables that are generated depending on the current machine (tic4x vs. tic3x). However, it is possible to change the machine from one invocation of print_insn_tic4x to the next. This patch throws away the old state if that happens, and uses a relatively small known size array of register names rather than a malloc'd table. * tic4x-dis.c (tic4x_version): Make unsigned long. (optab, optab_special, registernames): New file scope vars. (tic4x_print_register): Set up registernames rather than malloc'd registertable. (tic4x_disassemble): Delete optable and optable_special. Use optab and optab_special instead. Throw away old optab, optab_special and registernames when info->mach changes.	6 years ago
Sergey Belyashov	7a6bf3becb	Fix various assembler testsuite failures for the Z80 target. PR 25377 gas * config/tc-z80.c: Add support for half precision, single precision and double precision floating point values. * config/tc-z80.h b/gas/config/tc-z80.h: Disable string escapes. * doc/as.texi: Add new z80 command line options. * doc/c-z80.texi: Document new z80 command line options. * testsuite/gas/z80/ez80_pref_dis.s: New test. * testsuite/gas/z80/ez80_pref_dis.d: New test driver. * testsuite/gas/z80/z80.exp: Run the new test. * testsuite/gas/z80/fp_math48.d: Use correct command line option. * testsuite/gas/z80/fp_zeda32.d: Likewise. * testsuite/gas/z80/strings.d: Update expected output. opcodes * z80-dis.c (suffix): Use .db instruction to generate double prefix.	6 years ago
Alan Modra	ca1eaac0ed	ubsan: z8k: left shift cannot be represented in type 'int' * z8k-dis.c (unpack_instr): Formatting. Cast unsigned short values to unsigned before shifting.	6 years ago
Thomas Troeger	1d67fe3b6e	Add an option to objdump's disassembler to generate ascii art diagrams showing the destinations of flow control instructions. binutils* objdump.c (visualize_jumps, color_output, extended_color_output) (detected_jumps): New variables. (usage): Add the new jump visualization options. (option_values): Add new option value. (long_options): Add the new option. (jump_info_new, jump_info_free): New functions. (jump_info_min_address, jump_info_max_address): Likewise. (jump_info_end_address, jump_info_is_start_address): Likewise. (jump_info_is_end_address, jump_info_size): Likewise. (jump_info_unlink, jump_info_insert): Likewise. (jump_info_add_front, jump_info_move_linked): Likewise. (jump_info_intersect, jump_info_merge): Likewise. (jump_info_sort, jump_info_visualize_address): Likewise. (disassemble_jumps): New function - used to locate jumps. (disassemble_bytes): Add ascii art generation. (disassemble_section): Add scan to locate jumps. (main): Parse the new visualization option. * doc/binutils.texi: Document the new feature. * NEWS: Mention the new feature. opcodes * arm-dis.c (print_insn_arm): Fill in insn info fields for control flow instructions. (print_insn_thumb16, print_insn_thumb32): Likewise. (print_insn): Initialize the insn info. * i386-dis.c (print_insn): Initialize the insn info fields, and detect jumps.	6 years ago
Claudiu Zissulescu	5e4f7e0518	[ARC][committed] Code cleanup and improvements. Code clean up and improvements when changing the cpu from command line. Also, remove unused/old emulations. gas/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (arc_select_cpu): Re-init the bfd if we change the CPU. * config/tc-arc.h: Add header if/defs. * testsuite/gas/arc/pseudos.d: Improve matching pattern. ls/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * Makefile.am: Remove earcelf_prof.c and earclinux_prof.c emulations. * Makefile.in: Regenerate. * configure.tgt: Likewise. * emulparams/arcelf_prof.sh: Remove file. * emulparams/arclinux_prof.sh: Likewise. opcodes/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * arc-opc.c (C_NE): Make it required.	6 years ago
Claudiu Zissulescu	b9fe6b8aa6	[ARC] [COMMITTED] Change ACCL/ACCH reg name to generic. ACCL/ACCH register names are only available for ARCv2 architecture, leading to a confusion when disassembling for any other ARC variants. This patch is changing the default names for ACCL/ACCH to generic r58/r59. 2012-01-13 Claudiu Zissulescu <claziss@gmail.com> * opcode/arc-dis.c (regnames): Correct ACCL/ACCH naming, fix typo reserved register name.	6 years ago
Alan Modra	90dee485e5	asan: ns32k: wild memory write index_offset isn't set up for "sfsr", resulting in a random offset being used when trying to disassemble the following. .byte 0x3e, 0xf7, 0x07, 0x00 * ns32k-dis.c (Is_gen): Use strchr, add 'f'. (print_insn_ns32k): Adjust ioffset for 'f' index_offset.	6 years ago
Alan Modra	febda64f15	ubsan: wasm32: signed integer overflow The signed integer overflow occurred when adding one to target_count for (i = 0; i < target_count + 1; i++) but that's the least of the worries here. target_count was long and i int, leading to the possibility of a loop that never ended. So to avoid this type of vulnerability, this patch uses what I believe to be the proper types for arguments of various wasm32 opcodes, rather than using "long" which may change in size. gas/ * testsuite/gas/wasm32/allinsn.d: Update expected output. opcodes/ * wasm32-dis.c (print_insn_wasm32): Localise variables. Store result of wasm_read_leb128 in a uint64_t and check that bits are not lost when copying to other locals. Use uint32_t for most locals. Use PRId64 when printing int64_t.	6 years ago
Alan Modra	df08b5881b	score formatting * score-dis.c: Formatting. * score7-dis.c: Formatting.	6 years ago
Alan Modra	b2c759ce68	ubsan: score: left shift of negative value * score-dis.c (print_insn_score48): Use unsigned variables for unsigned values. Don't left shift negative values. (print_insn_score32): Likewise. * score7-dis.c (print_insn_score32, print_insn_score16): Likewise.	6 years ago
Alan Modra	5496abe1c5	tic4x: sign extension using shifts Don't do that. Especially don't use shift counts that assume the type being shifted is 32 bits when the type is long/unsigned long. Also reverts part of a change I made on 2019-12-11 to tic4x_print_register that on closer inspection turns out to be unnecessary. include/ * opcode/tic4x.h (EXTR): Delete. (EXTRU, EXTRS, INSERTU, INSERTS): Rewrite without zero/sign extension using shifts. Do trim INSERTU value to specified bitfield. opcodes/ * tic4x-dis.c (tic4x_print_register): Remove dead code. gas/ * config/tc-tic4x.c (tic4x_operands_match): Correct tic3x trap insertion.	6 years ago
Alan Modra	202e762b32	ubsan: fr30: left shift of negative value cpu/ * fr30.cpu (f-disp9, f-disp10, f-s10, f-rel9, f-rel12): Don't left shift signed values. opcodes/ * fr30-ibld.c: Regenerate.	6 years ago
Alan Modra	7ef412cf72	ubsan: xgate: left shift of negative value * xgate-dis.c (print_insn): Don't left shift signed value. (ripBits): Formatting, use 1u.	6 years ago
Alan Modra	7f578b959c	ubsan: tilepro: signed integer overflow * tilepro-opc.c (parse_insn_tilepro): Make opval unsigned. * tilegx-opc.c (parse_insn_tilegx): Likewise. Delete raw_opval.	6 years ago
Alan Modra	441af85bd9	ubsan: m10300: shift exponent -4 * m10300-dis.c (disassemble): Move extraction of DREG, AREG, RREG, and XRREG value earlier to avoid a shift with negative exponent. * m10200-dis.c (disassemble): Similarly.	6 years ago
Nick Clifton	bce58db4fb	Fix the cast used to prevent compile time warning about an always false test. PR 25224 * z80-dis.c (ld_ii_ii): Use correct cast.	6 years ago
Sergey Belyashov	40c75bc8b0	Fix compile time warnings about comparisons always being false. PR 25224 gas * config/tc-z80.c (emit_ld_m_rr): Use integer types when checking opcode byte values. (emit_ld_r_r): Likewise. (emit_ld_rr_m): Likewise. (emit_ld_rr_nn): Likewise. opcodes * z80-dis.c (ld_ii_ii): Use character constant when checking opcode byte value.	6 years ago
Jan Beulich	d835a58baa	x86: SYSENTER/SYSEXIT are unavailable in 64-bit mode on AMD The disassembler change is such that in default mode we'd disassemble the insns (for there not ebing any conflicts), but when AMD64 mode was explicitly requested, we'd show them as "(bad)".	6 years ago
Alan Modra	030a2e78ac	ubsan: z8k: index 10 out of bounds for type 'unsigned int const[10]' The fix is the additional ARRAY_SIZE test, the rest just tidies variable types rather than adding a cast to avoid warnings. opcodes/ * z8k-dis.c: Include libiberty.h (instr_data_s): Make max_fetched unsigned. (z8k_lookup_instr): Make nibl_index and tabl_index unsigned. Don't exceed byte_info bounds. (output_instr): Make num_bytes unsigned. (unpack_instr): Likewise for nibl_count and loop. * z8kgen.c (gas <opcode_entry_type>): Make noperands, length and idx unsigned. * z8k-opc.h: Regenerate. gas/ * config/tc-z8k.c (md_begin): Make idx unsigned. (get_specific): Likewise for this_index.	6 years ago
Shahab Vahedi	bb82aefe17	[ARC] Add finer details for LLOCK and SCOND This patch changes the "class" of LLOCK/SCOND from "MEMORY" to "LLOCK/SCOND" respectively. Moreover, it corrects the "data_size_mode". These changes are necessary for GDB's atmoic sequence handler. Signed-off-by: Shahab Vahedi <shahab@synopsys.com>	6 years ago
Alan Modra	cc6aa1a6e0	ubsan: m32c: left shift of negative value There are probably a lot more of these still here. cpu/ * m32c.cpu (f-dsp-8-u16, f-dsp-8-s16): Rearrange to mask any sign bits before shifting rather than masking after shifting. (f-dsp-16-u16, f-dsp-16-s16, f-dsp-32-u16, f-dsp-32-s16): Likewise. (f-dsp-40-u16, f-dsp-40-s16, f-dsp-48-u16, f-dsp-48-s16): Likewise. (f-dsp-64-u16, f-dsp-8-s24): Likewise. (f-bitbase32-16-s19-unprefixed): Avoid signed left shift. opcodes/ * m32c-ibld.c: Regenerate.	6 years ago
Alan Modra	660e62b1d9	PR25344, z80 disassembler recursion PR 25344 * z80-dis.c (suffix): Don't use a local struct buffer copy. Peek at next byte to prevent recursion on repeated prefix bytes. Ensure uninitialised "mybuf" is not accessed. (print_insn_z80): Don't zero n_fetch and n_used here,.. (print_insn_z80_buf): ..do it here instead.	6 years ago
Alan Modra	c9ae58fe32	ubsan: m32r: left shift of negative value cpu/ * m32r.cpu (f-disp8): Avoid left shift of negative values. (f-disp16, f-disp24): Likewise. opcodes/ * m32r-ibld.c: Regenerate.	6 years ago
Alan Modra	5f57d4ecf5	ubsan: cr16: left shift cannot be represented in type 'int' * cr16-dis.c (cr16_match_opcode): Avoid shift left of signed value.	6 years ago
Alan Modra	2c5c119630	ubsan: crx: left shift cannot be represented in type 'int' * crx-dis.c (match_opcode): Avoid shift left of signed value.	6 years ago
Alan Modra	2e98c6c5c5	ubsan: d30v: left shift cannot be represented in type 'int' * d30v-dis.c (print_insn): Avoid signed overflow in left shift.	6 years ago
Jan Beulich	5437a02abc	Arm64: correct address index operands for LD1RO{H,W,D} Just like their LD1RQ{H,W,D} counterparts, as per the specification the index registers get scaled by element size.	6 years ago
Jan Beulich	567dfba2be	Arm64: correct {su,us}dot SIMD encodings According to the specification these permit the Q bit to control the vector length operated on, and hence this bit should not already be set in the opcode table entries (it rather needs setting dynamically). Note how the test case output did also not match its input. Besides correcting the test case also extend it to cover both forms.	6 years ago
Jan Beulich	8c45011acd	Arm64: correct uzp{1,2} mnemonics According to the specification, and in line with the pre-existing predicate forms, the mnemonics do not include an 'i'.	6 years ago
Jan Beulich	f4950f76fa	Arm64: correct 64-bit element fmmla encoding There's just one bit of difference to the 32-bit element form, as per the documentation.	6 years ago
Sergey Belyashov	6655dba246	Add support for the GBZ80, Z180, and eZ80 variants of the Z80 architecure. Add an ELF based target for these as well. PR 25224 bfd * Makefile.am: Add z80-elf target support. * configure.ac: Likewise. * targets.c: Likewise. * config.bfd: Add z80-elf target support and new arches: ez80 and z180. * elf32-z80.c: New file. * archures.c: Add new z80 architectures: eZ80 and Z180. * coffcode.h: Likewise. * cpu-z80.c: Likewise. * bfd-in2.h: Likewise plus additional Z80 relocations. * coff-z80.c: Add new relocations for Z80 target and local label check. gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support for assembler code generated by SDCC. Add new relocation types. Add z80-elf target support. * config/tc-z80.h: Add z80-elf target support. Enable dollar local labels. Local labels starts from ".L". * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict. * testsuite/gas/all/fwdexp.s: Likewise. * testsuite/gas/z80/suffix.d: Fix failure on ELF target. * testsuite/gas/z80/z80.exp: Add new tests * testsuite/gas/z80/dollar.d: New file. * testsuite/gas/z80/dollar.s: New file. * testsuite/gas/z80/ez80_adl_all.d: New file. * testsuite/gas/z80/ez80_adl_all.s: New file. * testsuite/gas/z80/ez80_adl_suf.d: New file. * testsuite/gas/z80/ez80_isuf.s: New file. * testsuite/gas/z80/ez80_z80_all.d: New file. * testsuite/gas/z80/ez80_z80_all.s: New file. * testsuite/gas/z80/ez80_z80_suf.d: New file. * testsuite/gas/z80/r800_extra.d: New file. * testsuite/gas/z80/r800_extra.s: New file. * testsuite/gas/z80/r800_ii8.d: New file. * testsuite/gas/z80/r800_z80_doc.d: New file. * testsuite/gas/z80/z180.d: New file. * testsuite/gas/z80/z180.s: New file. * testsuite/gas/z80/z180_z80_doc.d: New file. * testsuite/gas/z80/z80_doc.d: New file. * testsuite/gas/z80/z80_doc.s: New file. * testsuite/gas/z80/z80_ii8.d: New file. * testsuite/gas/z80/z80_ii8.s: New file. * testsuite/gas/z80/z80_in_f_c.d: New file. * testsuite/gas/z80/z80_in_f_c.s: New file. * testsuite/gas/z80/z80_op_ii_ld.d: New file. * testsuite/gas/z80/z80_op_ii_ld.s: New file. * testsuite/gas/z80/z80_out_c_0.d: New file. * testsuite/gas/z80/z80_out_c_0.s: New file. * testsuite/gas/z80/z80_reloc.d: New file. * testsuite/gas/z80/z80_reloc.s: New file. * testsuite/gas/z80/z80_sli.d: New file. * testsuite/gas/z80/z80_sli.s: New file. ld * Makefile.am: Add new target z80-elf * configure.tgt: Likewise. * emultempl/z80.em: Add support for eZ80 and Z180 architectures. * emulparams/elf32z80.sh: New file. * emultempl/z80elf.em: Likewise. * testsuite/ld-z80/arch_ez80_adl.d: Likewise. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180.d: Likewise. * testsuite/ld-z80/labels.s: Likewise. * testsuite/ld-z80/relocs.s: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/z80.exp: Likewise. opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.	6 years ago
Alan Modra	b14ce8bfe1	Re: Update year range in copyright notice of binutils files Add the ChangeLog entry.	6 years ago

1 2 3 4 5 ...

3354 Commits (aeab2b26dbea33221db4debaf31c97277cfaea5e)